`max-width: 50%; max-height: 400px;` is a good fallback, however, if width and height are given and are smaller than fallback - we should persist that smaller size.
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
Now that we have support for user-selectable color schemes, it makes sense
to simplify seeding and theme updates in the wizard.
We now:
- seed only one theme, named "Default" (previously "Light")
- seed a user-selectable Dark color scheme
- rename the "Themes" wizard step to "Colors"
- update the default theme's color scheme if a default is set
(a new theme is created if there is no default)
When the server gets overloaded and lots of requests start queuing server
will attempt to shed load by returning 429 errors on background requests.
The client can flag a request as background by setting the header:
`Discourse-Background` to `true`
Out-of-the-box we shed load when the queue time goes above 0.5 seconds.
The only request we shed at the moment is the request to load up a new post
when someone posts to a topic.
We can extend this as we go with a more general pattern on the client.
Previous to this change, rate limiting would "break" the post stream which
would make suggested topics vanish and users would have to scroll the page
to see more posts in the topic.
Server needs this protection for cases where tons of clients are navigated
to a topic and a new post is made. This can lead to a self inflicted denial
of service if enough clients are viewing the topic.
Due to the internal security design of Discourse it is hard for a large
number of clients to share a channel where we would pass the full post body
via the message bus.
It also renames (and deprecates) triggerNewPostInStream to triggerNewPostsInStream
This allows us to load a batch of new posts cleanly, so the controller can
keep track of a backlog
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
A follow-up to a follow-up. (6932a373a3 and 572da7a57b)
Our `discourse_test` Docker image uses git 2.20.1 released on Dec 15, 2018. It does not support `git branch --show-current`. (it was added in 2.22.0)
Previously, any errors in those files would e.g. blow up the update process in docker_manager.
Now it prints out an error and proceeds as if there was no compatibility file.
Includes:
* DEV: Extract setup_git_repo
* DEV: Use `Dir.mktmpdir`
* DEV: Default to `main` branch (The latest versions of git already do this, so to avoid problems do this by default)
DEV: Replace instances of Discourse.base_uri with Discourse.base_path
This is clearer because the base_uri is actually just a path prefix. This continues the work started in 555f467.
See https://meta.discourse.org/t/email-address-change-confirmation-email-not-sent-but-every-other-notification-emails-are/165358
In short: with disable emails set to non-staff, email address change confirmation emails (those sent to the new address) are not sent for staff or admin members.
This was happening because we were looking up the staff user with the to_address of the email, but the to address was the new email address because we are sending a confirm email change email, and thus the user could not be found. We didn't need to do this anyway because we are passing the user into the Email::Sender class anyway.
When that site setting is enabled, the category counts (new/unread)
include the subcategory definition topics, but the topics aren't included
in the list. This fixes that discrepancy.
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
Allows site administrators to pick different fonts for headings in the wizard and in their site settings. Also correctly displays the header logos in wizard previews.
Upload.secure_media_url? raised an exceptions when the URL was invalid,
which was a issue in some situations where secure media URLs must be
removed.
For example, sending digests used PrettyText.strip_secure_media,
which used Upload.secure_media_url? to replace secure media with
placeholders. If the URL was invalid, then an exception would be raised
and left unhandled.
Now instead in UrlHelper.rails_route_from_url we return nil if there is something wrong with the URL.
Co-authored-by: Bianca Nenciu <nenciu.bianca@gmail.com>
See https://meta.discourse.org/t/changing-a-users-email/164512 for context.
When admin changes an email for a user, we were incorrectly sending the password reset email to the user's old address. Also the new email does not come into effect until the reset password process is done, so this PR adds some notes to the admin to make this clearer.
Extracted commonly used spec helpers into spec/support/uploads_helpers.rb, removed unused stubs and let definitions. Makes it easier to write new S3-related specs without copy and pasting setup steps from other specs.
This is a little bit of refactoring. Core Discourse should have default promotion message for TL2.
In addition, when the Discobot plugin is enabled, the user is invited to advanced training
Since 9e4ed03, moderators can view groups with visibility level set to "Group owners, members and moderators".
This fixes an issue where moderators can see the group in /g but then get a 404 when clicking on individual groups.
typographer can change " to ” leading to breakages in parser
At least codify this. Longer term we want to re-prioritize typographer so
it always runs after bbcode parsing.
Previously attributes such as `[test a='a"a' b="a'a"]` were not correctly
handled.
This amends the regex parser to ensure it correctly parses attributes
without breaking incorrectly on the first nested quote
To check if a post contains any embedded media, we look if the "image_sizes" attribute is present in the new post manager arguments.
We want to see one boxed links, but we only store the raw content of the post. To work around this, I extracted the onebox logic from the composer editor into a module.
We are making the changes from the PR #10563 the default behaviour. Now, if secure media is enabled, secure images will be embedded in emails by default instead of redacting them and displaying a message. This will be a nicer overall experience by default, and for forums that want to be super strict with redaction this setting can always be disabled.
This is intended for use by plugins which are building their own topic lists, and want to include PMs alongside regular topics (e.g. discourse-assign). It does not get used directly in core.
Editing a post didn't update the `post_uploads` right away. Instead it relied on the `CookedPostProcessor`. This can lead to an inconsistent state if uploads are added or removed during an edit and, for some reason, the `ProcessPost` job doesn't run (successfully). This inconsistency leads to missing uploads, because the newly added uploads appear to be unused and will be deleted by the `CleanUpUploads` job. In addition to that, uploads, which got removed during the edit, appear to be still in use and won't be deleted by the background job.
This commit ensures that the `post_uploads` are updated during the edit without relying on a background job.
In some cases Discourse admins may opt for sessions not to persist when a
browser is closed.
This is particularly useful in healthcare and education settings where
computers are shared among multiple workers.
By default `persistent_sessions` site setting is enabled, to opt out you
must disable the site setting.
We must guarantee that "rel=noopener" was set if "target=_blank" is present, which is not always the case for trusted users. Also, if the link contains the "nofollow" attribute, it has to have the "ugc" attribute as well.
In c6ceda8c, a bug was introduced where an admin searching for his own
private messages will actually end up searching through all private
messages on the site.
Follow-up to c6ceda8c4e
This PR introduces a few important changes to secure media redaction in emails. First of all, two new site settings have been introduced:
* `secure_media_allow_embed_images_in_emails`: If enabled we will embed secure images in emails instead of redacting them.
* `secure_media_max_email_embed_image_size_kb`: The cap to the size of the secure image we will embed, defaulting to 1mb, so the email does not become too big. Max is 10mb. Works in tandem with `email_total_attachment_size_limit_kb`.
`Email::Sender` will now attach images to the email based on these settings. The sender will also call `inline_secure_images` in `Email::Styles` after secure media is redacted and attachments are added to replace redaction messages with attached images. I went with attachment and `cid` URLs because base64 image support is _still_ flaky in email clients.
All redaction of secure media is now handled in `Email::Styles` and calls out to `PrettyText.strip_secure_media` to do the actual stripping and replacing with placeholders. `app/mailers/group_smtp_mailer.rb` and `app/mailers/user_notifications.rb` no longer do any stripping because they are earlier in the pipeline than `Email::Styles`.
Finally the redaction notice has been restyled and includes a link to the media that the user can click, which will show it to them if they have the necessary permissions.
- Lets child components extend color definitions
- Includes default theme color definitions
- Fails gracefully on color stylesheet SCSS errors
- Includes theme variables when extending colors
This PR ensures that new bookmarks cannot be created for deleted posts and topics, and also makes sure that if a bookmark was created and then the topic deleted that the show topic page does not error from trying to retrieve the bookmark reminder at.
DEV: add plugin hooks for silence message parameters
Allows plugins to add, and update extra silence message params for custom
i18n vars
Allows plugins to override system messages via `message_title` and
`message_raw` parameters. We can later expose these params where necessary via event
hooks. Expose the parameter for the on user_silenced trigger.
Previously in some cases the test suite could fail due to a bad entry in
redis from previous tests
This ensures the correct cache is expired when needed
Additionally improves performance of the redis check
"en_US" doesn't contain most of the translations, so it falls back to "en". But that behavior stopped translation overrides to work for pluralized strings in "en_US", because it relies on existing translations. This fixes it by looking up the existing translation in all fallback locales.
This commit adds a new site setting "allowed_onebox_iframes". By default, all onebox iframes are allowed. When the list of domains is restricted, Onebox will automatically skip engines which require those domains, and use a fallback engine.
With the addition of `PostSearchData#private_message`, a partial
index consisting of only search data from regular posts can be created.
The partial index helps to speed up searches on large sites since PG
will not have to do an index scan on the entire search data index which
has shown to be a bottle neck.
The filter noops if an incorrect username is passed. This filter is not
exposed as part of the UI but is only used when an admin transitions
from a search within a user's personal messages to the full page search.
Follow-up to 4b30799054.
Renamed from `private_messages` to `personal_messages` without
deprecation because the `private_messages` advanced search filter never
worked in the first place when it was implemented.
Because we allow all the other flag types on a deleted post we should be
able to send a pm to the user letting them know why we deleted their
post.
Bug report:
https://meta.discourse.org/t/-/161156
Like "default watching" and "default tracking" categories option now the "regular" categories support is added. It will be useful for sites that are muted by default. The user option will be displayed only if `mute_all_categories_by_default` site setting is enabled.
The rotp gem is currently pinned to version 5.1.0 and this will bump it
up to version 6.0.1.
Follow up to: 85d4370f79
because this issue we were waiting on is now closed:
https://github.com/mdp/rotp/issues/98
Because version 6 is now encoding the params I needed to update the
tests as well.
Themes can now declare custom colors that get compiled in core's color definitions stylesheet, thus allowing themes to better support dark/light color schemes.
For example, if you need your theme to use tertiary for an element in a light color scheme and quaternary in a dark scheme, you can add the following SCSS to your theme's `color_definitions.scss` file:
```
:root {
--mytheme-tertiary-or-quaternary: #{dark-light-choose($tertiary, $quaternary)};
}
```
And then use the `--mytheme-tertiary-or-quaternary` variable as the color property of that element. You can also use this file to add color variables that use SCSS color transformation functions (lighten, darken, saturate, etc.) without compromising your theme's compatibility with different color schemes.
Previously we did an early return if either SiteSetting.tagging_enabled or SiteSetting.allow_staff_to_tag_pms was false when updating the email on the IMAP server -- however this also stopped us from archiving or deleting emails if either of these were disabled.
This fixes an issue where a non-default theme set to use the base color
scheme (i.e. the theme had an empty `color_scheme_id`) was loading the
default theme's color scheme instead.
Adds functionality to reflect topic delete in Discourse to IMAP inbox (Gmail only for now) and reflecting Gmail deletes in Discourse.
Adding lots of tests, various refactors and code improvements.
When Discourse topic is destroyed in PostDestroyer mark the topic incoming email as imap_sync: true, and do the opposite when post is recovered.
When we run the S3 inventory, mark uploads that exist as verified true, those that don't as verified false, and uploads not included in the check / not yet checked as verified nil.
The UI prevents users from trying to create tags on topics when they
don't have permission, but if you are trying to add tags to a topic via
the API and you don't have permission before this change it would
silently succeed in creating the topic, but it wouldn't have any tags.
Now a 422 error will be returned with an error message when trying to
create a topic with tags when tagging is disabled or you don't have
enough trust level to add tags to a topic.
Bug report: https://meta.discourse.org/t/-/70525/14
Similar to `advanced_filter` I introduced `advanced_order`.
I needed a new option because default orders are evaluated after advanced_filter so I couldn't use it.
Also, that part is a little bit more generic
```
elsif word =~ /order:\w+/
@order = word.gsub('order:', '').to_sym
nil
```
After those changes, I can use them in plugins in this way:
```
Search.advanced_order(:votes) do |posts|
posts.reorder("COALESCE((SELECT dvvc.counter FROM discourse_voting_vote_counters dvvc WHERE dvvc.topic_id = subquery.topic_id), 0) DESC")
end
```
This commit should cause no functional change
- Split into functions to avoid deep nesting
- Register custom field type, and remove manual json parse/serialize
- Recover from deleted upload records
Also adds a test to ensure pull_hotlinked_images redownloads secure images only once
The assign plugin is one of two situations where a post can be both a whisper and a small-action. Check the action_code field to filter out small-actions.
* Fixed an issue I introduced in the last PR where I am just archiving everything regardless of whether it is actually archived in Discourse man_facepalming
* Refactor group list_mailboxes IMAP code to use providers, add specs, and add provider code to get the correct prodivder
A first step to adding automatic dark mode color scheme switching. Adds a new SCSS file at `color_definitions.scss` that serves to output all SCSS color variables as CSS custom properties. And replaces all SCSS color variables with the new CSS custom properties throughout the stylesheets.
This is an alpha feature at this point, can only be enabled via console using the `default_dark_mode_color_scheme_id` site setting.
Adds a imap_group_id column to IncomingEmail to deal with an issue where we were trying to update emails in the mailbox, calling IncomingEmail.where(imap_sync: true). However UID and UIDVALIDITY could be the same across accounts. So if group A used IMAP details for Gmail account A, and group B used IMAP details for Gmail account B, and both tried to sync changes to an email with UID of 3 (e.g. changing Labels), one account could affect the other. This even applied to Archiving!
Also in this PR:
* Fix error occurring if we do a uid_fetch and no emails are returned
* Allow for creating labels within the target mailbox (previously we would not do this, only use existing labels)
* Improve consistency for log messages
* Add specs for generic IMAP provider (Gmail specs still to come)
* Add custom archiving support for Gmail
* Only use Message-ID for uniqueness of IncomingEmail if it was generated by us
* Various refactors and improvements
For the following conditions, the TopicUser.bookmarked column was not updated correctly:
* When a bookmark was auto-deleted because the reminder was sent
* When a bookmark was auto-deleted because the owner of the bookmark replied to the topic
This adds another migration to fix the out-of-sync column and also some refactors to BookmarkManager to allow for more of these delete cases. BookmarkManager is used instead of directly destroying the bookmark in PostCreator and BookmarkReminderNotificationHandler.
If a user posted a topic and Akismet decided it was spam, the topic gets deleted and put into the review queue. If a category moderator for that category marked the post/topic as "Not Spam" the topic did not get recovered correctly because Guardian.new(@user).can_review_topic?(@post.topic) returned false incorrectly because the topic was deleted.
This adds a special filter to topic lists that will filter to tracked and
watched categories.
To use it you can visit:
`https://sitename/?filter=tracked`
`https://sitename/unread?filter=tracked`
and so on
Note, we do not include explicitly tracked and watched topics **outside** of
the tracked categories and tags.
We can consider a `filter=all_tracked` to cover this edge case.
To reproduce the initial issue here:
1. A user makes a post, which discourse-akismet marks as spam (I cheated and called `DiscourseAkismet::PostsBouncer.new.send(:mark_as_spam, post)` for this)
2. The post lands in the review queue
3. The category the topic is in has a `reviewable_by_group_id`
4. A user in that group goes and looks at the Review queue, decides the post is not spam, and clicks Not Spam
5. Weird stuff happens because the `PostDestroyer#recover` method didn't handle this (the user who clicked Not Spam was not the owner of the post and was not a staff member, so the post didn't get un-destroyed and post counts didn't get updated)
Now users who belong to a group who can review a category now have the ability to recover/delete posts fully.
This adds an option to "delete on owner reply" to bookmarks. If you select this option in the modal, then reply to the topic the bookmark is in, the bookmark will be deleted on reply.
This PR also changes the checkboxes for these additional bookmark options to an Integer column in the DB with a combobox to select the option you want.
The use cases are:
* Sometimes I will bookmark the topics to read it later. In this case we definitely don’t need to keep the bookmark after I replied to it.
* Sometimes I will read the topic in mobile and I will prefer to reply in PC later. Or I may have to do some research before reply. So I will bookmark it for reply later.
* FEATURE: Allow List for PMs
This feature adds a new user setting that is disabled by default that
allows them to specify a list of users that are allowed to send them
private messages. This way they don't have to maintain a large list of
users they don't want to here from and instead just list the people they
know they do want. Staff will still always be able to send messages to
the user.
* Update PR based on feedback
In 1bd8a075, a hidden site setting was added that causes Email::Styles
to treat its input as a complete document in all cases.
This commit enables that setting by default.
Some tests were removed that were broken by this change. They tested the
behaviour of applying email styles to empty strings. They weren't useful
because:
* Sending empty email is not something we ever intend to do,
* They were testing incidental behaviour - there are lots of
valid ways to process the empty string,
* Their intent wasn't clear from their descriptions,
It seems there was a discrepancy in that background images were attached
to the full slug category class: `category-:slug-:id` and our body class
only had `category-:slug`.
This fix adds support for both formats.
Considering document length in search introduced too much variance in
our search results such that it makes certain searches better but at the
same time made certain searches worst. Instead, we want to have a more
determistic way of ranking search so that it is easier to reason about
why a post is rank higher in search than another.
The long term plan to tackle repeated terms is to restrict the number of
positions for a given lexeme in our search index.
Follow up to d8c796bc4.
Note that his change increases query time by around 40% in the following
benchmark against `dev.discourse.org` but this is a tradeoff that has to be taken so that relevance
search is accurate.
```
require 'benchmark/ips'
Benchmark.ips do |x|
x.config(time: 10, warmup: 2)
x.report("current aggregate search query") do
DB.exec <<~SQL
SELECT "posts"."id", "posts"."user_id", "posts"."topic_id", "posts"."post_number", "posts"."raw", "posts"."cooked", "posts"."created_at", "posts"."updated_at", "posts"."reply_to_post_number", "posts"."reply_count", "posts"."quote_count", "posts"."deleted_at", "posts"."off_topic_count", "posts"."like_count", "posts"."incoming_link_count", "posts"."bookmark_count", "posts"."score", "posts"."reads", "posts"."post_type", "posts"."sort_order", "posts"."last_editor_id", "posts"."hidden", "posts"."hidden_reason_id", "posts"."notify_moderators_count", "posts"."spam_count", "posts"."illegal_count", "posts"."inappropriate_count", "posts"."last_version_at", "posts"."user_deleted", "posts"."reply_to_user_id", "posts"."percent_rank", "posts"."notify_user_count", "posts"."like_score", "posts"."deleted_by_id", "posts"."edit_reason", "posts"."word_count", "posts"."version", "posts"."cook_method", "posts"."wiki", "posts"."baked_at", "posts"."baked_version", "posts"."hidden_at", "posts"."self_edits", "posts"."reply_quoted", "posts"."via_email", "posts"."raw_email", "posts"."public_version", "posts"."action_code", "posts"."locked_by_id", "posts"."image_upload_id" FROM "posts" JOIN (SELECT *, row_number() over() row_number FROM (SELECT topics.id, min(posts.post_number) post_number FROM "posts" INNER JOIN "post_search_data" ON "post_search_data"."post_id" = "posts"."id" INNER JOIN "topics" ON "topics"."id" = "posts"."topic_id" AND ("topics"."deleted_at" IS NULL) LEFT JOIN categories ON categories.id = topics.category_id WHERE ("posts"."deleted_at" IS NULL) AND "posts"."post_type" IN (1, 2, 3, 4) AND (topics.visible) AND (topics.archetype <> 'private_message') AND (post_search_data.search_data @@ TO_TSQUERY('english', '''postgres'':*ABCD')) AND (categories.id NOT IN (
SELECT categories.id WHERE categories.search_priority = 1
)
) AND ((categories.id IS NULL) OR (NOT categories.read_restricted)) GROUP BY topics.id ORDER BY MAX((
TS_RANK_CD(
post_search_data.search_data,
TO_TSQUERY('english', '''postgres'':*ABCD'),
1|32
) *
(
CASE categories.search_priority
WHEN 2
THEN 0.6
WHEN 3
THEN 0.8
WHEN 4
THEN 1.2
WHEN 5
THEN 1.4
ELSE
CASE WHEN topics.closed
THEN 0.9
ELSE 1
END
END
)
)
) DESC, topics.bumped_at DESC LIMIT 51 OFFSET 0) xxx) x ON x.id = posts.topic_id AND x.post_number = posts.post_number WHERE ("posts"."deleted_at" IS NULL) ORDER BY row_number;
SQL
end
x.report("current aggregate search query with proper ranking") do
DB.exec <<~SQL
SELECT "posts"."id", "posts"."user_id", "posts"."topic_id", "posts"."post_number", "posts"."raw", "posts"."cooked", "posts"."created_at", "posts"."updated_at", "posts"."reply_to_post_number", "posts"."reply_count", "posts"."quote_count", "posts"."deleted_at", "posts"."off_topic_count", "posts"."like_count", "posts"."incoming_link_count", "posts"."bookmark_count", "posts"."score", "posts"."reads", "posts"."post_type", "posts"."sort_order", "posts"."last_editor_id", "posts"."hidden", "posts"."hidden_reason_id", "posts"."notify_moderators_count", "posts"."spam_count", "posts"."illegal_count", "posts"."inappropriate_count", "posts"."last_version_at", "posts"."user_deleted", "posts"."reply_to_user_id", "posts"."percent_rank", "posts"."notify_user_count", "posts"."like_score", "posts"."deleted_by_id", "posts"."edit_reason", "posts"."word_count", "posts"."version", "posts"."cook_method", "posts"."wiki", "posts"."baked_at", "posts"."baked_version", "posts"."hidden_at", "posts"."self_edits", "posts"."reply_quoted", "posts"."via_email", "posts"."raw_email", "posts"."public_version", "posts"."action_code", "posts"."locked_by_id", "posts"."image_upload_id" FROM "posts" JOIN (SELECT *, row_number() over() row_number FROM (SELECT subquery.topic_id id, (ARRAY_AGG(subquery.post_number ORDER BY rank DESC, bumped_at DESC))[1] post_number, MAX(subquery.rank) rank, MAX(subquery.bumped_at) bumped_at FROM (SELECT "posts"."id", "posts"."user_id", "posts"."topic_id", "posts"."post_number", "posts"."raw", "posts"."cooked", "posts"."created_at", "posts"."updated_at", "posts"."reply_to_post_number", "posts"."reply_count", "posts"."quote_count", "posts"."deleted_at", "posts"."off_topic_count", "posts"."like_count", "posts"."incoming_link_count", "posts"."bookmark_count", "posts"."score", "posts"."reads", "posts"."post_type", "posts"."sort_order", "posts"."last_editor_id", "posts"."hidden", "posts"."hidden_reason_id", "posts"."notify_moderators_count", "posts"."spam_count", "posts"."illegal_count", "posts"."inappropriate_count", "posts"."last_version_at", "posts"."user_deleted", "posts"."reply_to_user_id", "posts"."percent_rank", "posts"."notify_user_count", "posts"."like_score", "posts"."deleted_by_id", "posts"."edit_reason", "posts"."word_count", "posts"."version", "posts"."cook_method", "posts"."wiki", "posts"."baked_at", "posts"."baked_version", "posts"."hidden_at", "posts"."self_edits", "posts"."reply_quoted", "posts"."via_email", "posts"."raw_email", "posts"."public_version", "posts"."action_code", "posts"."locked_by_id", "posts"."image_upload_id", (
TS_RANK_CD(
post_search_data.search_data,
TO_TSQUERY('english', '''postgres'':*ABCD'),
1|32
) *
(
CASE categories.search_priority
WHEN 2
THEN 0.6
WHEN 3
THEN 0.8
WHEN 4
THEN 1.2
WHEN 5
THEN 1.4
ELSE
CASE WHEN topics.closed
THEN 0.9
ELSE 1
END
END
)
)
rank, topics.bumped_at bumped_at FROM "posts" INNER JOIN "post_search_data" ON "post_search_data"."post_id" = "posts"."id" INNER JOIN "topics" ON "topics"."id" = "posts"."topic_id" AND ("topics"."deleted_at" IS NULL) LEFT JOIN categories ON categories.id = topics.category_id WHERE ("posts"."deleted_at" IS NULL) AND "posts"."post_type" IN (1, 2, 3, 4) AND (topics.visible) AND (topics.archetype <> 'private_message') AND (post_search_data.search_data @@ TO_TSQUERY('english', '''postgres'':*ABCD')) AND (categories.id NOT IN (
SELECT categories.id WHERE categories.search_priority = 1
)
) AND ((categories.id IS NULL) OR (NOT categories.read_restricted))) subquery GROUP BY subquery.topic_id ORDER BY rank DESC, bumped_at DESC LIMIT 51 OFFSET 0) xxx) x ON x.id = posts.topic_id AND x.post_number = posts.post_number WHERE ("posts"."deleted_at" IS NULL) ORDER BY row_number;
SQL
end
x.compare!
end
```
```
Warming up --------------------------------------
current aggregate search query
1.000 i/100ms
current aggregate search query with proper ranking
1.000 i/100ms
Calculating -------------------------------------
current aggregate search query
18.040 (± 0.0%) i/s - 181.000 in 10.035241s
current aggregate search query with proper ranking
12.992 (± 0.0%) i/s - 130.000 in 10.007214s
Comparison:
current aggregate search query: 18.0 i/s
current aggregate search query with proper ranking: 13.0 i/s - 1.39x (± 0.00) slower
```
```
discourse_development=# SELECT alias, lexemes FROM TS_DEBUG('www.discourse.org');
alias | lexemes
-------+---------------------
host | {www.discourse.org}
discourse_development=# SELECT TO_TSVECTOR('www.discourse.org');
to_tsvector
-----------------------
'www.discourse.org':1
```
Given the above lexeme, we will inject additional lexeme by splitting
the host on `.`. The actual tsvector stored will look something like
```
tsvector
---------------------------------------
'discourse':1 'discourse.org':1 'org':1 'www':1 'www.discourse.org':1
```
Previously, we would only take either the `MIN` or `MAX` for
`post_number` during aggregation meaning that the ranking is not
considered.
```
require 'benchmark/ips'
Benchmark.ips do |x|
x.config(time: 10, warmup: 2)
x.report("current aggregate search query") do
DB.exec <<~SQL
SELECT "posts"."id", "posts"."user_id", "posts"."topic_id", "posts"."post_number", "posts"."raw", "posts"."cooked", "posts"."created_at", "posts"."updated_at", "posts"."reply_to_post_number", "posts"."reply_count", "posts"."quote_count", "posts"."deleted_at", "posts"."off_topic_count", "posts"."like_count", "posts"."incoming_link_count", "posts"."bookmark_count", "posts"."score", "posts"."reads", "posts"."post_type", "posts"."sort_order", "posts"."last_editor_id", "posts"."hidden", "posts"."hidden_reason_id", "posts"."notify_moderators_count", "posts"."spam_count", "posts"."illegal_count", "posts"."inappropriate_count", "posts"."last_version_at", "posts"."user_deleted", "posts"."reply_to_user_id", "posts"."percent_rank", "posts"."notify_user_count", "posts"."like_score", "posts"."deleted_by_id", "posts"."edit_reason", "posts"."word_count", "posts"."version", "posts"."cook_method", "posts"."wiki", "posts"."baked_at", "posts"."baked_version", "posts"."hidden_at", "posts"."self_edits", "posts"."reply_quoted", "posts"."via_email", "posts"."raw_email", "posts"."public_version", "posts"."action_code", "posts"."locked_by_id", "posts"."image_upload_id" FROM "posts" JOIN (SELECT *, row_number() over() row_number FROM (SELECT topics.id, min(posts.post_number) post_number FROM "posts" INNER JOIN "post_search_data" ON "post_search_data"."post_id" = "posts"."id" INNER JOIN "topics" ON "topics"."id" = "posts"."topic_id" AND ("topics"."deleted_at" IS NULL) LEFT JOIN categories ON categories.id = topics.category_id WHERE ("posts"."deleted_at" IS NULL) AND "posts"."post_type" IN (1, 2, 3, 4) AND (topics.visible) AND (topics.archetype <> 'private_message') AND (post_search_data.search_data @@ TO_TSQUERY('english', '''postgres'':*ABCD')) AND (categories.id NOT IN (
SELECT categories.id WHERE categories.search_priority = 1
)
) AND ((categories.id IS NULL) OR (NOT categories.read_restricted)) GROUP BY topics.id ORDER BY MAX((
TS_RANK_CD(
post_search_data.search_data,
TO_TSQUERY('english', '''postgres'':*ABCD'),
1|32
) *
(
CASE categories.search_priority
WHEN 2
THEN 0.6
WHEN 3
THEN 0.8
WHEN 4
THEN 1.2
WHEN 5
THEN 1.4
ELSE
CASE WHEN topics.closed
THEN 0.9
ELSE 1
END
END
)
)
) DESC, topics.bumped_at DESC LIMIT 51 OFFSET 0) xxx) x ON x.id = posts.topic_id AND x.post_number = posts.post_number WHERE ("posts"."deleted_at" IS NULL) ORDER BY row_number;
SQL
end
x.report("current aggregate search query with proper ranking") do
DB.exec <<~SQL
SELECT "posts"."id", "posts"."user_id", "posts"."topic_id", "posts"."post_number", "posts"."raw", "posts"."cooked", "posts"."created_at", "posts"."updated_at", "posts"."reply_to_post_number", "posts"."reply_count", "posts"."quote_count", "posts"."deleted_at", "posts"."off_topic_count", "posts"."like_count", "posts"."incoming_link_count", "posts"."bookmark_count", "posts"."score", "posts"."reads", "posts"."post_type", "posts"."sort_order", "posts"."last_editor_id", "posts"."hidden", "posts"."hidden_reason_id", "posts"."notify_moderators_count", "posts"."spam_count", "posts"."illegal_count", "posts"."inappropriate_count", "posts"."last_version_at", "posts"."user_deleted", "posts"."reply_to_user_id", "posts"."percent_rank", "posts"."notify_user_count", "posts"."like_score", "posts"."deleted_by_id", "posts"."edit_reason", "posts"."word_count", "posts"."version", "posts"."cook_method", "posts"."wiki", "posts"."baked_at", "posts"."baked_version", "posts"."hidden_at", "posts"."self_edits", "posts"."reply_quoted", "posts"."via_email", "posts"."raw_email", "posts"."public_version", "posts"."action_code", "posts"."locked_by_id", "posts"."image_upload_id" FROM "posts" JOIN (SELECT *, row_number() over() row_number FROM (SELECT subquery.topic_id id, (ARRAY_AGG(subquery.post_number))[1] post_number, MAX(subquery.rank) rank, MAX(subquery.bumped_at) bumped_at FROM (SELECT "posts"."id", "posts"."user_id", "posts"."topic_id", "posts"."post_number", "posts"."raw", "posts"."cooked", "posts"."created_at", "posts"."updated_at", "posts"."reply_to_post_number", "posts"."reply_count", "posts"."quote_count", "posts"."deleted_at", "posts"."off_topic_count", "posts"."like_count", "posts"."incoming_link_count", "posts"."bookmark_count", "posts"."score", "posts"."reads", "posts"."post_type", "posts"."sort_order", "posts"."last_editor_id", "posts"."hidden", "posts"."hidden_reason_id", "posts"."notify_moderators_count", "posts"."spam_count", "posts"."illegal_count", "posts"."inappropriate_count", "posts"."last_version_at", "posts"."user_deleted", "posts"."reply_to_user_id", "posts"."percent_rank", "posts"."notify_user_count", "posts"."like_score", "posts"."deleted_by_id", "posts"."edit_reason", "posts"."word_count", "posts"."version", "posts"."cook_method", "posts"."wiki", "posts"."baked_at", "posts"."baked_version", "posts"."hidden_at", "posts"."self_edits", "posts"."reply_quoted", "posts"."via_email", "posts"."raw_email", "posts"."public_version", "posts"."action_code", "posts"."locked_by_id", "posts"."image_upload_id", (
TS_RANK_CD(
post_search_data.search_data,
TO_TSQUERY('english', '''postgres'':*ABCD'),
1|32
) *
(
CASE categories.search_priority
WHEN 2
THEN 0.6
WHEN 3
THEN 0.8
WHEN 4
THEN 1.2
WHEN 5
THEN 1.4
ELSE
CASE WHEN topics.closed
THEN 0.9
ELSE 1
END
END
)
)
rank, topics.bumped_at bumped_at FROM "posts" INNER JOIN "post_search_data" ON "post_search_data"."post_id" = "posts"."id" INNER JOIN "topics" ON "topics"."id" = "posts"."topic_id" AND ("topics"."deleted_at" IS NULL) LEFT JOIN categories ON categories.id = topics.category_id WHERE ("posts"."deleted_at" IS NULL) AND "posts"."post_type" IN (1, 2, 3, 4) AND (topics.visible) AND (topics.archetype <> 'private_message') AND (post_search_data.search_data @@ TO_TSQUERY('english', '''postgres'':*ABCD')) AND (categories.id NOT IN (
SELECT categories.id WHERE categories.search_priority = 1
)
) AND ((categories.id IS NULL) OR (NOT categories.read_restricted))) subquery GROUP BY subquery.topic_id ORDER BY rank DESC, bumped_at DESC LIMIT 51 OFFSET 0) xxx) x ON x.id = posts.topic_id AND x.post_number = posts.post_number WHERE ("posts"."deleted_at" IS NULL) ORDER BY row_number;
SQL
end
x.compare!
end
```
```
Warming up --------------------------------------
current aggregate search query
1.000 i/100ms
current aggregate search query with proper ranking
1.000 i/100ms
Calculating -------------------------------------
current aggregate search query
17.726 (± 0.0%) i/s - 178.000 in 10.045107s
current aggregate search query with proper ranking
17.802 (± 0.0%) i/s - 178.000 in 10.002230s
Comparison:
current aggregate search query with proper ranking: 17.8 i/s
current aggregate search query: 17.7 i/s - 1.00x (± 0.00) slower
```
On large topics, the cost of sending the entire post ID list back over to the database is signficant. Just have the DB recalculate the list of visible posts instead.
It's a little awkward to test constants by re-assigning them so
I've added a new parameter to `Discourse.find_compatible_resource`
which can be used by tests.
Instead of loading all of the user bookmarks using all the post IDs in a topic, load all the bookmarks for a user using the topic ID. This eliminates a costly WHERE ID IN query.
Adds a new rake task `plugin:checkout_compatible_all` and
`plugin:checkout_compatible[plugin-name]` that check out compatible plugin
versions.
Supports a .discourse-compatibility file in the root of plugins and themes that
list out a plugin's compatibility with certain discourse versions:
eg: .discourse-compatibility
```
2.5.0.beta6: some-git-hash
2.4.4.beta4: some-git-tag
2.2.0: git-reference
```
This ensures older Discourse installs are able to find and install older
versions of plugins without intervention, through the manifest only.
It iterates through the versions in descending order. If the current Discourse
version matches an item in the manifest, it checks out the listed plugin target.
If the Discourse version is greater than an item in the manifest, it checks out
the next highest version listed in the manifest.
If no versions match, it makes no change.
This is a very expensive process, and it should only be required in exceptional circumstances. It is possible to run a similar recovery using `rake uploads:recover` (5284d41a8e/lib/upload_recovery.rb (L135-L184))
Previously, while generating the topic page's canoncial url we used the current post number. It will create invalid canonical path if the topic has whsiper posts. Now we only taking the visible posts for current page index calculation.
* FIX: Correct version comparison logic when comparing stable to beta
For example, version 1.3.0 should be considered higher than 1.3.0.beta3. So `Discourse.has_needed_version?('1.3.0', '1.3.0.beta3')` should return true
* Switch to use Gem::Version to compare versions
When rebaking a post we were invalidating _regular_ oneboxes but not inline oneboxes.
DEV: also renamed 'InlineOneboxer.purge' to 'InlineOneboxer.invalidate' to keep
the API consistent with 'Oneboxer.invalidate'
When linking to a topic in the same Discourse, we try to onebox the link to show the title
and other various information depending on whether it's a "standard" or "inline" onebox.
However, we were not properly detecting links to topics that had no slugs (eg. https://meta.discourse.org/t/1234).
FIX: prevent re-flagging when we have reviewed flags before
Fixes an edge case where a review can be reflagged when:
User flags as inappropriate.
Moderator rejects the flag.
Another user re-flags the post as spam.
Before, anyone was able to re-flag as inappropriate despite it being flagged
previously. With this, users are unable to re-flag for the same reason
regardless of reviewable status.
Looks like some html elements like `aside` and `section` will throw an error
when checking if they are inline or not. The commit simply handles
```
Job exception: undefined method `inline?' for nil:NilClass
```
and adds a test for it.
In some restricted setups all JS payloads need tight control.
This setting bans admins from making changes to JS on the site and
requires all themes be whitelisted to be used.
There are edge cases we still need to work through in this mode
hence this is still not supported in production and experimental.
Use an example like this to enable:
`DISCOURSE_WHITELISTED_THEME_REPOS="https://repo.com/repo.git,https://repo.com/repo2.git"`
By default this feature is not enabled and no changes are made.
One exception is that default theme id was missing a security check
this was added for correctness.
Previously the pull hotlinked images job was skipped after system edits. This ensured that we never had an infinite loop of system-edit/pull-hotlinked/system-edit/pull-hotlinked etc.
A side effect was that edits made by system for any other reason (e.g. API, removing full quotes) would prevent pulling hotlinked images. This commit removes the system edit check, and replaces it with another method to avoid an infinite job scheduling loop.
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
If a user is created with an id of 999, a `upload.user_id ==
user_avatar.user_id` will return true. This fix increases the id of the
upload to something that we will not hit in the foreseeable future.
Adds a new topic_excerpt_maxlength site setting.
* When topic excerpt is requested for a post, use the new topic_excerpt_maxlength site setting to limit the size of the excerpt
* Remove code for getting/setting Post.excerpt_size as it is not used anywhere
In some cases, between Discourse forums the hostname of a URL could match if they are hosting S3 files on the same bucket but the S3 bucket path might not. So e.g. https://testbucket.somesite.com/testpath/some/file/url.png vs https://testbucket.somesite.com/prodpath/some/file/url.png. So has_been_uploaded? was returning true for the second URL, even though it may have been uploaded on a different Discourse forum.
This is a very rare case but must be accounted for, because this impacts UrlHelper.is_local which mistakenly thinks the file has already been downloaded and thus allows the URL to be cooked, where we want to return the full URL to be downloaded using PullHotlinkedImages.
* DEV: Add framework for filtered plugin registers
Plugins often need to add values to a list, and we need to filter those lists at runtime to ignore values from disabled plugins. This commit provides a re-usable way to do that, which should make it easier to add new registers in future, and also reduce repeated code.
Follow-up commits will migrate existing registers to use this new system
* DEV: Migrate user and group custom field APIs to plugin registry
This gives us a consistent system for checking plugin enabled state, so we are repeating less logic. API changes are backwards compatible
* DEV: Standardize table sorting verbiage
This commit creates a common component that tables can use to make their
headers sortable. This commit also standardizes on using `desc` as the
default and passing in the `asc=true` flag to adjust the sorting
direction.
* Add deprecation warnings
Adds deprecation warnings if using previous params and maintains
backwards compatibility. Set the default sort value for group members to
be asc.
* switch group requests to use common table-header-toggle
* update fixture
* PERF: Dematerialize topic_reply_count
It's only ever used for trust level promotions that run daily, or compared to 0. We don't need to track it on every post creation.
* UX: Add symbol in TL3 report if topic reply count is capped
* DEV: Drop user_stats.topic_reply_count column
Use a helper method to simplify creating a new register. Previously this would require creating lots of different methods manually, and adding every register to the clear/reset functions
This refactors default_current_user_provider in a few ways:
- Introduce a generic `api_parameter_allowed?` method which checks for whitelisted routes/formats
- Only read the api_key parameter on allowed routes. It is now completely ignored on other routes (previously it would raise a 403)
- Start reading user_api_key parameter on allowed routes
- Refactor tests as end-end integration tests
A plugin API for PARAMETER_API_PATTERNS will be added soon
There were two constants here, `INLINE_ONEBOX_LOADING_CSS_CLASS` and
`INLINE_ONEBOX_CSS_CLASS` that were both longer than the strings they
were DRYing up: `inline-onebox-loading` and `inline-onebox`
I normally appreciate constants, but in this case it meant that we had
a lot of JS imports resulting in many more lines of code (and CPU cycles
spent figuring them out.)
It also meant we had an `.erb` file and had to invoke Ruby to create the
JS file, which meant the app was harder to port to Ember CLI.
I removed the constants. It's less DRY but faster and simpler, and
arguably the loss of DRYness is not significant as you can still search
for the `inline-onebox-loading` and `inline-onebox` strings easily if
you are refactoring.
Locale files get precompiled after deployment and they contained translations from the `default_locale`. That's especially bad in multisites, because the initial `default_locale` is `en_US`. Sites where the `default_locale` isn't `en_US` could see missing translations. The same thing could happen when users are allowed to chose a different locale.
This change simplifies the logic by not using the `default_locale` in the locale chain. It always falls back to `en` in case of missing translations.
The failover spec is very fragile and tests specific implementation
vs actual behavior
We rely on a different script during the build process to test
failover operates correctly
This introduces new APIs for obtaining optimized thumbnails for topics. There are a few building blocks required for this:
- Introduces new `image_upload_id` columns on the `posts` and `topics` table. This replaces the old `image_url` column, which means that thumbnails are now restricted to uploads. Hotlinked thumbnails are no longer possible. In normal use (with pull_hotlinked_images enabled), this has no noticeable impact
- A migration attempts to match existing urls to upload records. If a match cannot be found then the posts will be queued for rebake
- Optimized thumbnails are generated during post_process_cooked. If thumbnails are missing when serializing a topic list, then a sidekiq job is queued
- Topic lists and topics now include a `thumbnails` key, which includes all the available images:
```
"thumbnails": [
{
"max_width": null,
"max_height": null,
"url": "//example.com/original-image.png",
"width": 1380,
"height": 1840
},
{
"max_width": 1024,
"max_height": 1024,
"url": "//example.com/optimized-image.png",
"width": 768,
"height": 1024
}
]
```
- Themes can request additional thumbnail sizes by using a modifier in their `about.json` file:
```
"modifiers": {
"topic_thumbnail_sizes": [
[200, 200],
[800, 800]
],
...
```
Remember that these are generated asynchronously, so your theme should include logic to fallback to other available thumbnails if your requested size has not yet been generated
- Two new raw plugin outlets are introduced, to improve the customisability of the topic list. `topic-list-before-columns` and `topic-list-before-link`
Recently, we added feature that we are sending `/muted` to users who muted specific topic just before `/latest` so the client knows to ignore those messages - https://github.com/discourse/discourse/pull/9482
Same `/muted` message should be included when the post is edited
TLDR; this commit vastly improves how whitespaces are handled when converting from HTML to Markdown.
It also adds support for converting HTML <tables> to markdown tables.
The previous 'remove_whitespaces!' method was traversing the whole HTML tree and used a heuristic to remove
leading and trailing whitespaces whenever it was appropriate (ie. mostly before and after HTML block elements)
It was a good idea, but it was very limited and leaded to bad conversion when the html had leading whitespaces on several lines for example.
One such example can be found [here](https://meta.discourse.org/t/86782).
For various reasons, most of the whitespaces in a HTML file is ignored when the page is being displayed in a browser.
The rules that the browsers follow are the [CSS' White Space Processing Rules](https://www.w3.org/TR/css-text-3/#white-space-rules).
They can be quite complicated when you take into account RTL languages and other various tidbits but they boils down to the following:
- Collapse whitespaces down to one space (0x20) inside an inline context (ie. nodes/tags that are being displaying on the same line)
- Remove any leading/trailing whitespaces inside an inline context
One quick & dirty way of getting this 90% solved would be to do 'HTML.gsub!(/[[:space:]]+/, " ")'.
We would also need to hoist <pre> elements in order to not mess with their whitespaces.
Unfortunately, this solution let some whitespaces creep around HTML tags which leads to more '.strip!' calls than I can bear.
I decided to "emulate" the browser's handling of whitespaces and came up with a solution in 4 parts
1. remove_not_allowed!
The HtmlToMarkdown library is recursively "visiting" all the nodes in the HTML in order to convert them to Markdown.
All the nodes that aren't handled by the library (eg. <script>, <style> or any non-textual HTML tags) are "swallowed".
In order to reduce the number of nodes visited, the method 'remove_not_allowed!' will automatically delete all the nodes
that have no "visitor" (eg. a 'visit_<tag>' method) defined.
2. remove_hidden!
Similar purpose as the previous method (eg. reducing number of nodes visited), there's no point trying to convert something that is hidden.
The 'remove_hidden!' method removes any nodes that was hidden using the "hidden" HTML attribute, some CSS or with a width or height equal to 0.
3. hoist_line_breaks!
The 'hoist_line_breaks!' method is there to handle <br> tags. I know those tiny <br> don't do much but they can be quite annoying.
The <br> tags are inline elements but they visually work like a block element (ie. they create a new line).
If you have the following HTML "<i>Foo<br>Bar</i>", it ends up visually similar to "<i>Foo</i><br><i>Bar</i>".
The latter being much more easy to process than the former, so that's what this method is doing.
The "hoist_line_breaks" will hoist <br> tags out of inline tags until their parent is a block element.
4. remove_whitespaces!
The "remove_whitespaces!" is where all the whitespace removal is happening. It's broken down into 4 methods as well
- remove_whitespaces!
- is_inline?
- collapse_spaces!
- remove_trailing_space!
The 'remove_whitespace!' method is recursively walking the HTML tree (skipping <pre> tags).
If a node has any children, they will be chunked into groups of inline elements vs block elements.
For each chunks of inline elements, it will call the "collapse_space!" and "remove_trailing_space!" methods.
For each chunks of block elements, it will call "remote_whitespace!" to keep walking the HTML tree recursively.
The "is_inline?" method determines whether a node is part of a inline context.
A node is inline iif it's a text node or it's an inline tag, but not <br>, and all its children are also inline.
The "collapse_spaces!" method will collapse any kind of (white) space into a single space (" ") character, even accros tags.
For example, if we have " Foo \n<i> Bar </i>\t42", it will return "Foo <i>Bar </i>42".
Finally, the "remove_trailing_space!" method is there to remove any trailing space that might creep in at the end of the inline chunk.
This solution is not 100% bullet-proof.
It does not support RTL languages at all and has some caveats that I felt were not worth the work to get properly fixed.
FIX: better detection of hidden elements when converting HTML to Markdown
FIX: take into account the 'allowed_href_schemes' site setting when converting HTML <a> to Markdown
FIX: added support for 'mailto:' scheme when converting <a> from HTML to Markdown
FIX: added support for <img> dimensions when converting from HTML to Markdown
FIX: added support for <dl>, <dd> and <dt> when converting from HTML to Markdown
FIX: added support for multilines emphases, strongs and strikes when converting from HTML to Markdown
FIX: added support for <acronym> when converting from HTML to Markdown
DEV: remove unused 'sanitize' gem
Wow, did you just read all that?! Congratz, here's a cookie: 🍪.
We have the `# frozen_string_literal: true` comment on all our
files. This means all string literals are frozen. There is no need
to call #freeze on any literals.
For files with `# frozen_string_literal: true`
```
puts %w{a b}[0].frozen?
=> true
puts "hi".frozen?
=> true
puts "a #{1} b".frozen?
=> true
puts ("a " + "b").frozen?
=> false
puts (-("a " + "b")).frozen?
=> true
```
For more details see: https://samsaffron.com/archive/2018/02/16/reducing-string-duplication-in-ruby
Trigger an event for plugins to consume when a user session is refreshed.
This allows external auth to be notified about account activity, and be
able to take action such as use oauth refresh tokens to keep oauth
tokens valid.
If the feature is enabled, staff members can construct a URL and publish a
topic for others to browse without the regular Discourse chrome.
This is useful if you want to use Discourse like a CMS and publish
topics as articles, which can then be embedded into other systems.
* DEPRECATION: Remove support for api creds in query params
This commit removes support for api credentials in query params except
for a few whitelisted routes like rss/json feeds and the handle_mail
route.
Several tests were written to valid these changes, but the bulk of the
spec changes are just switching them over to use header based auth so
that they will pass without changing what they were actually testing.
Original commit that notified admins this change was coming was created
over 3 months ago: 2db2003187
* fix tests
* Also allow iCalendar feeds
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
* FIX: guardian always got user but sometimes it is anonymous
```
def initialize(user = nil, request = nil)
@user = user.presence || AnonymousUser.new
@request = request
end
```
AnonymouseUser defines `blank?` method
```
class AnonymousUser
def blank?
true
end
...
end
```
so if we would use @user.present? it would be correct, however, just @user is always true
* FEATURE: add setting `auto_approve_email_domains` to auto approve users
This commit adds a new site setting `auto_approve_email_domains` to
auto approve users based on their email address domain.
Note that if a domain already exists in `email_domains_whitelist` then
`auto_approve_email_domains` needs to be duplicated there as well,
since users won’t be able to register with email address that is
not allowed in `email_domains_whitelist`.
* Update config/locales/server.en.yml
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
* FIX: Perform crop using user-specified image sizes
It used to resize the images to max width and height first and then
perform the crop operation. This is wrong because it ignored the user
specified image sizes from the Markdown.
* DEV: Use real images in test
Previously we would consider a user "present" and "last seen" if the
browser window was visible.
This has many edge cases, you could be considered present and around for
days just by having a window open and no screensaver on.
Instead we now also check that you either clicked, transitioned around app
or scrolled the page in the last minute in combination with window
visibility
This will lead to more reliable notifications via email and reduce load of
message bus for cases where a user walks away from the terminal
Previous to this change slugs for leaves in 3 level nestings would not work
Our UX picks only the last two levels
This also makes the results consistent for slugs as it enforces order.
- Define the CSP based on the requested domain / scheme (respecting force_https)
- Update EnforceHostname middleware to allow secondary domains, add specs
- Add URL scheme to anon cache key so that CSP headers are cached correctly
New `duration` attribute is introduced for the `set_or_create_timer` method in the commit aad12822b7 for "based on last post" and "auto delete replies" topic timers.
Two behaviors in the mail gem collide:
1. Attachments are added as extra parts at the top level,
2. When there are both text and html parts, the content type is set to
'multipart/alternative'.
Since attachments aren't alternative renderings, for emails that contain
attachments and both html and text parts, some coercing is necessary.
* This PR implements the scheduling and notification system for bookmark reminders. Every 5 minutes a schedule runs to check any reminders that need to be sent before now, limited to **300** reminders at a time. Any leftover reminders will be sent in the next run. This is to avoid having to deal with fickle sidekiq and reminders in the far-flung future, which would necessitate having a background job anyway to clean up any missing `enqueue_at` reminders.
* If a reminder is sent its `reminder_at` time is cleared and the `reminder_last_sent_at` time is filled in. Notifications are only user-level notifications for now.
* All JavaScript and frontend code related to displaying the bookmark reminder notification is contained here. The reminder functionality is now re-enabled in the bookmark modal as well.
* This PR also implements the "Remind me next time I am at my desktop" bookmark reminder functionality. When the user is on a mobile device they are able to select this option. When they choose this option we set a key in Redis saying they have a pending at desktop reminder. The next time they change devices we check if the new device is desktop, and if it is we send reminders using a DistributedMutex. There is also a job to ensure consistency of these reminders in Redis (in case Redis drops the ball) and the at desktop reminders expire after 20 days.
* Also in this PR is a fix to delete all Bookmarks for a user via `UserDestroyer`
There are three modifiers:
- serialize_topic_excerpts (boolean)
- csp_extensions (array of strings)
- svg_icons (array of strings)
When multiple themes are active, the values will be combined. The combination method varies based on the setting. CSP/SVG arrays will be combined. serialize_topic_excerpts will use `Enumerable#any`.
PostMover passes to PostCreator a `created_at` that is a `ActiveSupport::WithTimeZone` instance (and also `is_a? Time`). Previously it was always being passed through `Time.zone.parse` so it would lose sub-second information. Now, it takes `Time` input as-is, while still parsing other types.
This is because the TOTP gem identifies as a colon as an addressable
protocol. The solution for now is to remove the colon in the issuer
name.
Changing the issuer changes the token values, but now it was completely
broken for colons so this should not be breaking anyone new.
A follow-up correction to this change https://github.com/discourse/discourse/pull/9001.
When admin changes staff email still enforce old email confirm. Only allow auto-confirm of a new email by admin IF the target user is not also an admin. If an admin gets locked out of their email the site admin can use the rails console to solve the issue in a pinch.
When admin changes a user's email from the preferences page of that user:
* The user will not be sent an email to confirm that their
email is changing. They will be sent a reset password email
so they can set the password for their account at the new
email address.
* The user will still be sent an email to their old email to inform
them that it was changed.
* Admin and staff users still need to follow the same old + new
confirm process, as do users changing their own email.
If a group mention could be notified on preview it was given an `<a>`
tag with the `.notify` class. When cooked it would display differently.
This patch makes the server side cooking match the client preview.
After adding a tag as a synonym of another tag,
both tags will have the wrong topic counts. It's
corrected within 12 hours by the EnsureDbConsistency
job. This fix ensures the topic counts are updated
much sooner.
This is not used in core or official plugins, and has been printing a deprecation notice since v2.3.0beta4. All OpenID 2.0 code and dependencies have been dropped. The user_open_ids table remains for now, in case anyone has missed the deprecation notice, and needs to migrate their data.
Context at https://meta.discourse.org/t/-/113249
This commit removes logic about spoilers because it should live inside
of the discourse-spoiler-alert plugin.
This PR:
https://github.com/discourse/discourse-spoiler-alert/pull/38
also completely removes spoilers from excerpts in order to keep them
from leaking in topic previews and notifications.
Some auth providers (e.g. Auth0 with default configuration) send the email address in the name field. In Discourse, the name field is made public, so this commit adds a safeguard to prevent emails being made public.
For some reasons, we have two ways of associating "custom fields" to a new topic:
using 'meta_data' and 'custom_fields'.
However, if we were to provide both arguments, the 'meta_data' would be overwritten
by any 'custom_fields' provided.
This commit ensures we can use both and merges the 'custom_fields' with the 'meta_data'.
This fix ensures that the site setting `post_edit_time_limit` does not
bypass the limit of the site setting `min_trust_to_edit_post`. This
prevents a bug where users that did not meet the minimum trust level to
edit could edit the title of topics.
When we change upload's sha1 (e.g. when resizing images) it won't match the data in the most recent S3 inventory index. With this change the uploads that have been updated since the inventory has been generated are ignored.
When FinalDestination is given a URL it encodes it before doing anything else. however S3 presigned URLs should not be messed with in any way otherwise we can end up with 400 errors when downloading the URL e.g.
<Error><Code>InvalidToken</Code><Message>The provided token is malformed or otherwise invalid.</Message>
The signature of presigned URLs is very important and is automatically generated and should be preserved.
For example /t/ URLs were being replaced if they contained secure-media-uploads so if you made a topic called "Secure Media Uploads Are Cool" the View Topic link in the user notifications would be stripped out.
Refactored code so this secure URL detection happens in one place.
Previously if somehow a user created a blank markdown document using tag
tricks (eg `<p></p><p></p><p></p><p></p><p></p><p></p>`) and so on, we would
completely strip the document down to blank on post process due to onebox
hack.
Needs a followup cause I am still unclear about the reason for empty p stripping
and it can cause some unclear cases when we re-cook posts.
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
The new search modifier `in:all` can be used to include both public and personal messages in the same search.
Co-authored-by: adam j hartz <hz@mit.edu>
* DEV: Add a fake Mutex that for concurrency testing with Fibers
* DEV: Support running in sleep order in concurrency tests
* FIX: A separate FallbackHandler should be used for each redis pair
This commit refactors the FallbackHandler and Connector:
* There were two different ways to determine whether the redis master
was up. There is now one way and it is the responsibility of the
new RedisStatus class.
* A background thread would be created whenever `verify_master` was
called unless the thread already existed. The thread would
periodically check the status of the redis master. However, checking
that a thread is `alive?` is an ineffective way of determining
whether it will continue to check the redis master in the future
since the thread may be in the process of winding down.
Now, this thread is created when the recorded master status goes from
up to down. Since this thread runs the only part of the code that is
able to bring the recorded status up again, we ensure that only one
thread is probing the redis master at a time and that there is always
a thread probing redis master when it is recorded as being down.
* Each time the status of the redis master was checked periodically, it
would spawn a new thread and immediately join on it. I assume this
happened to isolate the check from the current execution, but since
the join rethrows exceptions in the parent thread, this was not
effective.
* The logic for falling back was spread over the FallbackHandler and
the Connector. The connector is now a dumb object that delegates
responsibility for determining the status of redis to the
FallbackHandler.
* Previously, failing to connect to a master redis instance when it was
not recorded as down would raise an exception. Now, this exception is
passed to `Discourse.warn_exception` and the connection is made to
the slave.
This commit introduces the FallbackHandlers singleton:
* It is responsible for holding the set of FallbackHandlers.
* It adds callbacks to the fallback handlers for when a redis master
comes up or goes down. Main redis and message bus redis may exist on
different or the same redis hosts and so these callbacks may all
exist on the same FallbackHandler or on separate ones.
These objects are tested using fake concurrency provided by the
Concurrency module:
* An `around(:each)` hook is used to cause each test to run inside a
Scenario so that the test body, mocking cleanup and `after(:each)`
callbacks are run in a different Fiber.
* Therefore, holting the execution of the Execution abruptly (so that
the fibers aren't run to completion), prevents the mocking cleaning
and `after(:each)` callbacks from running. I have tried to prevent
this by recovering from all exceptions during an Execution.
* FIX: Create frozen copies of passed in config where possible
* FIX: extract start_reset method and remove method used by tests
Co-authored-by: Daniel Waterworth <me@danielwaterworth.com>
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
When we were pulling hotlinked images for oneboxes in the CookedPostProcessor, we were using the direct S3 URL, which returned a 403 error and thus did not set widths and heights of the images. We now cook the URL first based on whether the upload is secure before handing off to FastImage.
Let's say post #2 quotes post number #1. If a user decides to quote the
quote in post #2, it should keep the information of post #1
("user_1, post: 1, topic: X"), instead of replacing with current post
info ("user_2, post: 2, topic: X").
* enqueue spam/dmarc failing emails instead of hiding
* add translations for dmarc/spam enqueued reasons
* unescape quote
* if email_in_authserv_id is blank return gray for all emails
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
This ensures that the user object is created fresh for each example.
This is required for this particular spec as we can not risk having a stale
object, which can lead to a flaky spec.
People rarely want to have their avatars show up as the preview image on social media platforms. Instead, we should fall back to the site opengraph image.
It used to check how many quotes were inside a post, without taking
considering that some quotes can contain other quotes. This commit
selects only top level quotes.
I had to use XPath because I could not find an equivalent CSS
selector.
Meta thread: https://meta.discourse.org/t/sending-a-pm-with-the-following-title-causes-an-error/135654/3
We had an issue where if someone sent a PM with crazy
characters that are stripped and we end up with only
a number, the topic redirect errored because the slug was
a number. so instead we return the default as well if
the slug is a number after prettification
The ROTP gem is only used in a very small amount of places in the app, we don't need to globally require it.
Also set the Addressable gem to not have a specific version range, as it has not been a problem yet.
Some slight refactoring of UserSecondFactor here too to use SecondFactorManager to avoid code repetition
This is a slight workaround which helps somewhat now but is pending a larger
fix.
When this spec ran in parallel mode uploads could start cross talking and
an upload you expect to be there may vanish.
This works around the issue by making the upload unique every time it is
created
It also folds up an expensive test into the main one.
* DEV: Add API to alter uploads Markdown
* DEV: Extract data attributes from image / download Markdown
For example '[test|attachment|hello=world]' will generate an 'a' element
with a data attribute: 'data-hello=world'.
This commit also makes MarkdownIt to transform '|attachment' into
'class="attachment"'. This transformation used to be a part of the
process which resolves short URLs (i.e. upload://).
* DEV: Export imageNameFromFileName
Non UTF-8 user_agent requests were bypassing logging due to PG always
wanting UTF-8 strings.
This adds some conversion to ensure we are always dealing with UTF-8
This fixes the following issues:
* The link element on the lightbox which pops open the lightbox was linking to the S3 URL with a private ACL instead of the secure media URL for the image
* Change to use `@post.with_secure_media?` in `CookedPostProcessor` for URL cooking, as in some cases, like when a post is edited and an upload is added, `upload.secure?` can be false which resulted in `srcset` URLs not being cooked correctly to secure media upload urls.
This feature adds the ability to define synonyms for tags, and the ability to merge one tag into another while keeping it as a synonym. For example, tags named "js" and "java-script" can be synonyms of "javascript". When searching and creating topics using synonyms, they will be mapped to the base tag.
Along with this change is a new UI found on each tag's page (for example, `/tags/javascript`) where more information about the tag can be shown. It will list the synonyms, which categories it's restricted to (if any), and which tag groups it belongs to (if tag group names are public on the `/tags` page by enabling the "tags listed by group" setting). Staff users will be able to manage tags in this UI, merge tags, and add/remove synonyms.
This bug was causing some unusual behavior when the last post is filtered (e.g. from an ignored user). In some situations this would cause suggested topics to be omitted from the payload.
The next_page specs have been updated to remove most of the stubs
* FEATURE: Ability to add components to all themes
This is the first and functional step from that topic https://dev.discourse.org/t/adding-a-theme-component-is-too-much-work/15398/16
The idea here is that when a new component is added, the user can easily assign it to all themes (parents).
To achieve that, I needed to change a site-setting component to accept `setDefaultValues` action and `setDefaultValuesLabel` translated label.
Also, I needed to add `allowAny` option to disable that for theme selector.
I also refactored backend to accept both parent and child ids with one method to avoid duplication (Renamed `add_child_theme!` to more general `add_relative_theme!`)
* FIX: Improvement after code review
* FIX: Improvement after code review2
* FIX: use mapBy and filterBy directly
We already cache failed onebox URL requests client-side, we now want to cache this on the server-side for extra protection. failed onebox previews will be cached for 1 hour, and any more requests for that URL will fail with a 404 status. Forcing a rebake via the Rebake HTML action will delete the failed URL cache (like how the oneboxer preview cache is deleted).
If a user has more than 60 active sessions, the oldest sessions will be terminated automatically. This protects performance when logging in and when loading the list of recently used devices.
This is a bottom up rewrite of Discourse cache to support faster performance
and a limited surface area.
ActiveSupport::Cache::Store accepts many options we do not use, this partial
implementation only picks the bits out that we do use and want to support.
Additionally params are named which avoids typos such as "expires_at" vs "expires_in"
This also moves a few spots in Discourse to use Discourse.cache over setex
Performance of setex and Discourse.cache.write is similar.
Discourse.cache is a more consistent method to use and offers clean fallback
if you are skipping redis
This is part of a larger change that both optimizes Discoruse.cache and omits
use of setex on $redis in favor of consistently using discourse cache
Bench does reveal that use of Rails.cache and Discourse.cache is 1.25x slower
than redis.setex / get so a re-implementation will follow prior to porting
PG 12 changes internals in a subtle way, time jitter is noticed in a few new
spots (which is normal) and default ordering is a bit different which is meant
to be random anyway.
There was an issue on dev where when uploading secure media, the href of the media was correctly being replaced in the CookedPostProcessor, but the srcset urls were not being replaced correctly. This is because UrlHelper.cook_url was returning the asset host URL for the media for secure media instead of returning early with the proxied secure proxy url.
In non-login-required sites, we prevent secure uploads already used in PMs from being used in public topics.
In login_required sites, secure uploads should be reusable in any topic, PM or not.
Previously our custom exception handler was unable to handle situations
where an invalid mime type was sent, resulting in a warning log
This ensures we pretend a request is HTML for the purpose of rendering
the error page if an invalid mime type from a scanner is shipped to the app
* Fix an issue where if an edit was made to a post with a reason provided, and then another edit was made with no reason, the original edit reason got wiped out
* We now always make a post revision (even with ninja edits) if an edit reason has been provided and it is different from the current edit reason
Co-Authored-By: Sam <sam.saffron@gmail.com>
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
Previously people were not consistent about mocking which left internals in
a fragile state when running subfolder specs.
This introduces a simple helper `set_subfolder` which you can use to set
the subfolder for the spec. It takes care of proper configuration of subfolder
and teardown.
```
# usage
set_subfolder "/my_amazing_subfolder"
```
You should no longer stub base_uri or global_settings
This version hash is used for the filename, and so browsers/CDNs cache based on it. Previously the version hash was based only on the list of requested icons. This can cause issues in a couple of situations, most commonly when developing themes with custom icons:
- A requested icon does not exist, and then later is added to the theme. The bundle output changes, but the hash did not
- The SVG content of an icon changes, but the name of the icon does not. The bundle output changes, but the hash did not
* When viewing a tag, the search widget will now show a checkbox to scope the search by tag, which will limit search results to that tag on desktop and mobile
This method had grown into a monster. Its query had bugs
that I couldn't fix, and new features would be hard to add.
Also I don't understand how it all works anymore...
Replace it with common table expressions that can be queried
to generate the results we need, instead of subtracting
results using lots of "NOT IN" clauses.
Fixed are bugs with tag schemas that use combinations of
tag groups, parent tags, and one-tag-per-topic restrictions.
For example: https://meta.discourse.org/t/130991/6
Previously we were always hard-coding expiry, this allows the secure session
to correctly handle custom expiry times
Also adds a ttl method for looking up time to live
Instead of enabling `suppress_from_latest` setting on many categories now we can enable `mute_all_categories_by_default` site setting. Then users should opt-in to categories for them to appear in the latest and categories pages.
This makes it easy to run multiple commands with the same keyword arguments. The main use is for using `chdir` across multiple commands. The `Dir.chdir` method is not concurrency safe because it switches the working directory of the entire process.
- Allow revoking keys without deleting them
- Auto-revoke keys after a period of no use (default 6 months)
- Allow multiple keys per user
- Allow attaching a description to each key, for easier auditing
- Log changes to keys in the staff action log
- Move all key management to one place, and improve the UI
This is a follow-up to the new feature that allows a category to
require a certain number of tags from a tag group. The tag input will
shows results from the required group if none have been chosen yet.
Once a require tag is selected, the tag input will include other
results as usual. Staff users can ignore this restriction, so the input
behaviour is unchanged for them.
* use image alt as a fallback when there's no title
* update spec
we used to check that the overlay information is added when the image has a titie. This adds 2 more scenarios. One where an image has both a title and an alt, in which case the title should be used and alt ignored.
The other is when there's only an alt, it should then be used to generate the overlay
Meta thread: https://meta.discourse.org/t/cant-dismiss-unread-if-last-post-is-an-assign-or-whisper/131823/7
* when sending a whisper, the highest_staff_post_number is set
in the next_post_number method for a Topic, but the
highest_post_number is left alone. this leaves a situation
where highest_staff_post_number is > highest_post_number
* when TopicsBulkAction#dismiss_posts was run, it was only setting the topic_user
highest_seen_post_number using the highest_post_number from the topic, so if
the user was staff and the last post in a topic was a whisper
their highest seen number was not set, and the topic stayed unread
Found through testing that the bug wasn't to do with Assign/Unassign as they do not affect the post numbers, only whispering does.
In a category's settings, the Tags tab has two new fields to
specify the number of tags that must be added to a topic
from a tag group. When creating a new topic, an error will be
shown to the user if the requirement isn't met.
This was not causing any known issue, because the system user ID is always the same across all sites. However, we should cache this on a per-site basis to be safe.
This ensures we only update last_posted_at which is user facing for non messages
and non whispers.
We still update this date for secure categories, we do not revert it for
deleted posts.
Adds the settings:
raw_email_max_length, raw_rejected_email_max_length, delete_rejected_email_after_days.
These settings control retention of the "raw" emails logs.
raw_email_max_length ensures that if we get incoming email that is huge we will truncate it removing uploads from the raw log.
raw_rejected_email_max_length introduces an even more aggressive truncation for rejected incoming mail.
delete_rejected_email_after_days controls how many days we will keep rejected emails for (default 90)
* FEATURE: Site setting/ui to allow users to set their primary group
* prettier and remove logic from account template
* added 1 to 43 to make web_hook_user_serializer_spec pass
While editing the first post it does't bumped the topic when the new post revision created. Because we wrongly assumed that the hidden tags are changed even when no tags are updated.
Doing .pluck(:column).first is a very common pattern in Discourse and in
most cases, a limit cause isn't being added. Instead of adding a limit
clause to all these callsites, this commit adds two new methods to
ActiveRecord::Relation:
pluck_first, equivalent to limit(1).pluck(*columns).first
and pluck_first! which, like other finder methods, raises an exception
when no record is found
Trying to truncate encoded slugs will mean that we have to keep the URL
valid, which can be tricky as you have to be aware of multibyte
characters.
Since we already have upper bounds for the title, the slug won't grow
for more than title*6 in the worst case. The slug column in the topic
table can store that just fine.
Added a test to ensure that a generated slug is a valid URL too, so we
don't introduce regressions in the future.
Previously the 'local_cdn_url' method didn't returned the correct cdn url. So we written few incorrect spec tests too.\n\nf92a6f7ac5228342177bf089d269e2f69a69e2f5
When an admin changes the site setting slug_generation_method to
encoded, we weren't really encoding the slug, but just allowing non-ascii
characters in the slug (unicode).
That brings problems when a user posts a link to topic without the slug, as
our topic controller tries to redirect the user to the correct URL that contains
the slug with unicode characters. Having unicode in the Location header in a
response is a RFC violation and some browsers end up in a redirection loop.
Bug report: https://meta.discourse.org/t/-/125371?u=falco
This commit also checks if a site uses encoded slugs and clear all saved slugs
in the db so they can be regenerated using an onceoff job.
Using popups is becoming increasingly rare. Full page redirects are already used on mobile, and for some providers. This commit removes all logic related to popup authentication, leaving only the full page redirect method.
For more info, see https://meta.discourse.org/t/do-we-need-popups-for-login/127988
* FEATURE: Adds an extra protection layer when decompressing files.
* Rename exporter/importer to zip importer. Update old locale
* Added a new composite class to decompress a file with multiple strategies
* Set max file size inside a site setting
* Ensure that file is deleted after compression
* Sanitize path and files before compressing/decompressing
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
This means that TL0 users can message groups with "Who can message this
group?" set to "Everyone".
It also means that members of a group with "Who can message this
group?" set to "members, moderators and admins" can also message the
group, even when their trust level is below min_trust_to_send_messages.
* Adjustments to pass specs on Rails 6.0.0
* Use classic autoloader instead of Zeitwerk
* Update Rails 6.0.0 deprecated methods
* Rails 6.0.0 not allowing column with integer name
* Drop freedom_patches/rails6.rb
* Default value for trigger_transactional_callbacks? is true
* Bump rspec-rails version to 4.0.0.beta2
* FEATURE: Add tl2 threshold for editing new posts
* Adds a new setting and for tl2 editing posts (30 days same as old value)
* Sets the tl0/tl1 editing period as 1 day
* FIX: Spec uses wrong setting
* Fix site setting on guardian spec
* FIX: post editing period specs
* Avoid shared examples
* Use update_columns to avoid callbacks on user during tests
This commit introduces 2 features:
1. DISCOURSE_COMPRESS_ANON_CACHE (true|false, default false): this allows
you to optionally compress the anon cache body entries in Redis, can be
useful for high load sites with Redis that lives on a separate server to
to webs
2. DISCOURSE_ANON_CACHE_STORE_THRESHOLD (default 2), only pop entries into
redis if we observe them more than N times. This avoids situations where
a crawler can walk a big pile of topics and store them all in Redis never
to be used. Our default anon cache time for topics is only 60 seconds. Anon
cache is in place to avoid the "slashdot" effect where a single topic is
hit by 100s of people in one minute.
Start tracking the date an api key was last used. This has already been
the case for user_api_keys.
This information can provide us with the ability to automatically expire
unused api keys after N days.
This allows custom plugins such as prometheus exporter to log how many
requests are stored in the anon cache vs used by the anon cache.
This metric allows us to fine tune cache behaviors
* Revert "Revert "FEATURE: Publish read state on group messages. (#7989) [Undo revert] (#8024)""
This reverts commit 36425eb9f0.
* Fix: Show who read only if the attribute is enabled
* PERF: Precalculate the last post readed by a group member
* Use book-reader icon instear of far-eye
* FIX: update topic groups correctly
* DEV: Tidy up read indicator update on write
This is a very long standing bug we had, if a plugin attempted to amend a
serializer core was not "correcting" the situation for all descendant classes
this often only showed up in production cause production eager loads serializers
prior to plugins amending them.
This is a critical fix for various plugins
* Reenable: "FEATURE: Publish read state on group messages. (#7989)"
This reverts commit 67f5cc1ce8.
* FIX: Read indicator only appears when the group setting is enabled
* Enable or disable read state based on group attribute
* When read state needs to be published, the minimum unread count is calculated in the topic query. This way, we can know if someone reads the last post
* The option can be enabled/disabled from the UI
* The read indicator will live-updated using message bus
* Show read indicator on every post
* The read indicator now shows read count and can be expanded to see user avatars
* Read count gets updated everytime someone reads a message
* Simplify topic-list read indicator logic
* Unsubscribe from message bus on willDestroyElement, removed unnecesarry values from post-menu, and added a comment to explain where does minimum_unread_count comes from
There are 5 visibility levels (similar to group visibility)
public (default)
logged-in users
members only
staff
owners
Admins & group owners always have visibility to group members.
