Also:
* Remove an unused method (#fill_email)
* Replace a method that was used just once (#generate_username) with `SecureRandom.alphanumeric`
* Remove an obsolete dev puma `tmp/restart` file logic
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
Some time ago, we made this fix to external authentication – https://github.com/discourse/discourse/pull/13706. We didn't address Discourse Connect (https://meta.discourse.org/t/discourseconnect-official-single-sign-on-for-discourse-sso/13045) at that moment, so I wanted to fix it for Discourse Connect as well.
Turned out though that Discourse Connect doesn't contain this problem and already handles staged users correctly. This PR adds tests that confirm it. Also, I've extracted two functions in Discourse Connect implementation along the way and decided to merge this refactoring too (the refactoring is supported with tests).
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
* REFACTOR: Improve support for consolidating notifications.
Before this commit, we didn't have a single way of consolidating notifications. For notifications like group summaries, we manually removed old ones before creating a new one. On the other hand, we used an after_create callback for likes and group membership requests, which caused unnecessary work, as we need to delete the record we created to replace it with a consolidated one.
We now have all the consolidation rules centralized in a single place: the consolidation planner class. Other parts of the app looking to create a consolidable notification can do so by calling Notification#consolidate_or_save!, instead of the default Notification#create! method.
Finally, we added two more rules: one for re-using existing group summaries and another for deleting duplicated dashboard problems PMs notifications when the user is tracking the moderator's inbox. Setting the threshold to one forces the planner to apply this rule every time.
I plan to add plugin support for adding custom rules in another PR to keep this one relatively small.
* DEV: Introduces a plugin API for consolidating notifications.
This commit removes the `Notification#filter_by_consolidation_data` scope since plugins could have to define their criteria. The Plan class now receives two blocks, one to query for an already consolidated notification, which we'll try to update, and another to query for existing ones to consolidate.
It also receives a consolidation window, which accepts an ActiveSupport::Duration object, and filter notifications created since that value.
Currently when a user creates posts that are moderated (for whatever
reason), a popup is displayed saying the post needs approval and the
total number of the user’s pending posts. But then this piece of
information is kind of lost and there is nowhere for the user to know
what are their pending posts or how many there are.
This patch solves this issue by adding a new “Pending” section to the
user’s activity page when there are some pending posts to display. When
there are none, then the “Pending” section isn’t displayed at all.
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
When this setting is turned on, it will check that normalized emails
are unique. Normalized emails are emails without any dots or plus
aliases.
This setting can be used to block use of aliases of the same email
address.
The users all shared the same `User#last_seen_at` column so depending on
how the database returned the records, the user that we're interested in
may be excluded from the update query.
Follow-up to 8226ab1099
In b8c8909a9d, we introduced a regression
where users may have had their `UserStat.first_unread_pm_at` set
incorrectly. This commit introduces a migration to reset `UserStat.first_unread_pm_at` back to
`User#created_at`.
Follow-up to b8c8909a9d.
Similar to site settings, adds support for `refresh` option to theme settings.
```yaml
super_feature_enabled:
type: bool
default: false
refresh: true
```
We are pushing /notification-alert/#{user_id} and /notification/#{user_id}
messages to MessageBus from both PostAlerter and User#publish_notification_state.
This can cause memory issues on large sites with many users. This commit
stems the bleeding by only sending these alert messages if the user
in question has been seen in the last 30 days, which eliminates a large
chunk of users on some sites.
Previously, incorrect reply counts are displayed in the "top categories" section of the user summary page since we included the `moderator_action` and `small_action` post types.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Previously, suppressed category topics are included in the digest emails if the user visited that topic before and the `TopicUser` record is created with any notification level except 'muted'.
* DEV: Sanitize HTML admin inputs
This PR adds on-save HTML sanitization for:
Client site settings
translation overrides
badges descriptions
user fields descriptions
I used Rails's SafeListSanitizer, which [accepts the following HTML tags and attributes](018cf54073/lib/rails/html/sanitizer.rb (L108))
* Make sure that the sanitization logic doesn't corrupt settings with special characters
This PR doesn't change any behavior, but just removes code that wasn't in use. This is a pretty dangerous place to change, since it gets called during user's registration. At the same time the refactoring is very straightforward, it's clear that this code wasn't doing any work (it still needs to be double-checked during review though). Also, the test coverage of UserNameSuggester is good.
When inviting a group to a topic, there may be members of
the group already in the topic as topic allowed users. These
can be safely removed from the topic, because they are implicitly
allowed in the topic based on their group membership.
Also, this prevents issues with group SMTP emails, which rely
on the topic_allowed_users of the topic to send to and cc's
for emails, and if there are members of the group as topic_allowed_users
then that complicates things and causes odd behaviour.
We also ensure that the OP of the topic is not removed from
the topic_allowed_users when a group they belong to is added,
as it will make it harder to add them back later.
This is a follow-up to https://github.com/discourse/discourse/pull/14541. This adds a hidden setting for restoring the old behavior for those users who rely on it. We'll likely deprecate this setting at some point in the future.
Sometimes administrators want to permanently delete posts and topics
from the database. To make sure that this is done for a good reasons,
administrators can do this only after one minute has passed since the
post was deleted or immediately if another administrator does it.
We don't want to be using emails as source for username and name suggestions in cases when it's possible that a user have no chance to intervene and correct a suggested username. It risks exposing email addresses.
Previosuly, quotes from original topics are rendered incorrectly since the moved posts are not rebaked.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
FinalDestination now supports the `follow_canonical` option, which will perform an initial GET request, parse the canonical link if present, and perform a HEAD request to it.
We use this mode during embeds to avoid treating URLs with different query parameters as different topics.
Previously, while retrieving each upload urls in a post S3 CDN urls with different path in prefix (external urls technically) are considered as uploaded url. It created issue while checking missing uploads.
This commit resolves refactors can_invite_to? to use
can_invite_to_forum? for checking the site-wide permissions and then
perform topic specific checkups.
Similarly, can_invite_to? is always used with a topic object and this is
now enforced.
There was another problem before when `must_approve_users` site setting
was not checked when inviting users to forum, but was checked when
inviting to a topic.
Another minor security issue was that group owners could invite to
group topics even if they did not have the minimum trust level to do
it.
Instead of going to the OP of the topic for topic-level bookmarks
(which are bookmarks where for_topic is true) when clicking on the
bookmark in the quick access menu or on the user bookmark list,
this commit takes the user to the last unread post in
the topic instead. This should be generally more useful than landing
on the unchanging OP.
To make this work nicely, I needed to add the last_read_post_number to
the BookmarkQuery based on the TopicUser association. It should not add
too much extra weight to the query, because it is limited to the user
that we are fetching bookmarks for.
Also fixed an issue where the bookmark serializer highest_post_number was
not taking into account whether the user was staff, which is when we
should use highest_staff_post_number instead.
* DEV: use active record `save!` instead of mini sql.
The "save" method will trigger the before_save callback "match_primary_group_changes" for User model. Else `flair_group_id` won't be removed from the user.
* check whether the method `match_primary_group_changes` called or not.
After deleting a category, we should soft-delete the category definition topic instead of hard deleting it. Else it causes issues while doing the user merge action if the source user has an orphan post that belongs to the deleted topic.
This new column will be used to indicate that a bookmark
is at the topic level. The first post of a topic can be
bookmarked twice after this change -- with for_topic set
to true and with for_topic set to false.
A later PR will use this column for logic to bookmark the
topic, and then topic-level bookmark links will take you
to the last unread post in the topic.
See also 22208836c5
We don't need no stinkin' denormalization! This commit ignores
the topic_id column on bookmarks, to be deleted at a later date.
We don't really need this column and it's better to rely on the
post.topic_id as the canonical topic_id for bookmarks, then we
don't need to remember to update both columns if the bookmarked
post moves to another topic.
When a user archives a personal message, they are redirected back to the
inbox and will refresh the list of the topics for the given filter.
Publishing an event to the user results in an incorrect incoming message
because the list of topics has already been refreshed.
This does mean that if a user has two tabs opened, the non-active tab
will not receive the incoming message but at this point we do not think
the technical trade-offs are worth it to support this feature. We
basically have to somehow exclude a client from an incoming message
which is not easy to do.
Follow-up to fc1fd1b416
DEV: Allow passing cook_method to TopicEmbed.import to override default
This will be used in the rss-polling plugin when we want to have
oneboxes on feed content, like youtube for example.
There are certain design decisions that were made in this commit.
Private messages implements its own version of topic tracking state because there are significant differences between regular and private_message topics. Regular topics have to track categories and tags while private messages do not. It is much easier to design the new topic tracking state if we maintain two different classes, instead of trying to mash this two worlds together.
One MessageBus channel per user and one MessageBus channel per group. This allows each user and each group to have their own channel backlog instead of having one global channel which requires the client to filter away unrelated messages.
When a staff member clicks on a user's number of flagged posts, we redirect them to the review queue, so it makes sense to count the number of items there to calculate the count.
We used to look at post action items to calculate this number, which doesn't match the number of items in the queue if old flags exist.
When a post is flagged with the reason of 'Something Else' a brief message can be added by the user which subsequently creates a `meta_topic` private message. The group `moderators` is automatically added to this topic.
If category group moderation is enabled, and the post belongs to a category with a reviewable group, that group should also be added to the meta_topic.
Note: This extends the `notify_moderators` logic, and will add the reviewable group to the meta_topic, regardless of the settings of that group.
* FIX: Update draft count when sequence is increased
Sometimes users ended up having a draft count higher than the actual
number of drafts.
* FIX: Do not update draft count twice
The call to DraftSequence.next! above already does it.
Group flair is not removed while removing a user from the group since the `before_save` callback methods are not triggered while using the `update_columns` method.
When a post is created, the draft sequence is increased and then older
drafts are automatically executing a raw SQL query. This skipped the
Draft model callbacks and did not update user's draft count.
I fixed another problem related to a raw SQL query from Draft.cleanup!
method.
This commit adds the number of drafts a user has next to the "Draft"
label in the user preferences menu and activity tab. The count is
updated via MessageBus when a draft is created or destroyed.
Will show the last 6 seen users as filtering suggestions when typing @ in quick search. (Previously the user suggestion required a character after the @.)
This also adds a default limit of 6 to the user search query, previously the backend was returning 20 results but a maximum of 6 results was being shown anyway.
Fixes two issues:
- ignores invalid XML in custom icon sprite SVG file (and outputs an error if sprite was uploaded via admin UI)
- clears SVG sprite cache when deleting an `icons-sprite` upload in a theme
Previously we would re-calculate topic_user.liked for all users who have ever viewed the source or destination topic. This can be very expensive on large sites. Instead, we can use the array of moved post ids to find which users are actually affected by the move, and restrict the update query to only check/update their records.
On an example site this reduced the `update_post_action_cache` time from ~27s to 300ms
When secure media is enabled or when upload secure status
is updated, we also try and update the upload ACL. However
if the object storage provider does not implement this we
get an Aws::S3::Errors::NotImplemented error. This PR handles
this error so the update_secure_status method does not error
out and still returns whether the secure status changed.
User flair was given by user's primary group. This PR separates the
two, adds a new field to the user model for flair group ID and users
can select their flair from user preferences now.
Users can invite people to topics from secured category, but they will
not be redirected to the topic after signing up unless they have the
permissions to view the topic. This commit shows a warning when invite
is saved if the topic is in a secured category and none of the invite
groups are allowed to see it.
We renamed the site setting for this long ago, but there
were a few places left in the code base where "ninja edit"
needed to be turned into "grace period". Doing this here
to avoid combatative language.
We want to put the name of the trust level in to generated URLs, not the human-readable form.
i.e.:
`/admin/users/list/newuser`
rather than:
`/admin/users/list/new user`
When a topic is fully merged into another topic we close it and schedule it for deleting. But last time I changed this place I added a bug – when merging all posts in topic except the first one the topic was closing too.
If the OP is not merged into another topic, the original topic shouldn't be closed and marked for deletion. This PR fixes this.
This PR backtracks a fair bit on this one https://github.com/discourse/discourse/pull/13220/files.
Instead of sending the group SMTP email for each user via `UserNotifications`, we are changing to send only one email with the existing `Jobs::GroupSmtpEmail` job and `GroupSmtpMailer`. We are changing this job and mailer along with `PostAlerter` to make the first topic allowed user the `to_address` for the email and any other `topic_allowed_users` to be the CC address on the email. This is to cut down on emails sent via SMTP, which is subject to daily limits from providers such as Gmail. We log these details in the `EmailLog` table now.
In addition to this, we have changed `PostAlerter` to no longer rely on incoming email email addresses for sending the `GroupSmtpEmail` job. This was unreliable as a user's email could have changed in the meantime. Also it was a little overcomplicated to use the incoming email records -- it is far simpler to reason about to just use topic allowed users.
This also adds a fix to include cc_addresses in the EmailLog.addressed_to_user scope.
ATM it only implements server side of it, as my need is for automation purposes. However it should probably be added in the UI too as it's unexpected to have pinned_until and no bannered_until.
This adds the following columns to EmailLog:
* cc_addresses
* cc_user_ids
* topic_id
* raw
This is to bring the EmailLog table closer in parity to
IncomingEmail so it can be better utilized for Group SMTP
and IMAP mailing.
The raw column contains the full content of the outbound email,
but _only_ if the new hidden site setting
enable_raw_outbound_email_logging is enabled. Most sites do not
need it, and it's mostly required for IMAP and SMTP sending.
In the next pull request, there will be a migration to backfill
topic_id on the EmailLog table, at which point we can remove the
topic fallback method on EmailLog.
Before this change, calling `StyleSheet::Manager.stylesheet_details`
for the first time resulted in multiple queries to the database. This is
because the code was modelled in a way where each `Theme` was loaded
from the database one at a time.
This PR restructures the code such that it allows us to load all the
theme records in a single query. It also allows us to eager load the
required associations upfront. In order to achieve this, I removed the
support of loading multiple themes per request. It was initially added
to support user selectable theme components but the feature was never
completed and abandoned because it wasn't a feature that we thought was
worth building.
When dismissing new topics for the Tracked filter, the dismiss was
limited to 30 topics which is the default per page count for TopicQuery.
This happened even if you specified which topic IDs you were
selectively dismissing. This PR fixes that bug, and also moves
the per_page_count into a DEFAULT_PER_PAGE_COUNT for the TopicQuery
so it can be stubbed in tests.
Also moves the unused stub_const method into the spec helpers
for cases like this; it is much better to handle this in one place
with an ensure. In a follow up PR I will clean up other specs that
do the same thing and make them use stub_const.
When we call Bookmark.cleanup! we want to make sure that
topic_user.bookmarked is updated for topics linked to the
bookmarks that were deleted. Also when PostDestroyer calls
destroy and recover. We have a job for this already --
SyncTopicUserBookmarked -- so we just utilize that.
Subclasses must call #delete_user_actions inside build_actions to support user deletion. The method adds a delete user bundle, which has a delete and a delete + block option. Every subclass is responsible for implementing these actions.
Leaking state and non-obvious order (before :all runs *before* RailsHelper.test_setup) are not worth it.
A replacement PR for #13370. Fixes some flaky specs, e.g.
```
bin/rspec './spec/components/freedom_patches/translate_accelerator_spec.rb[1:3]' './spec/jobs/clean_up_user_export_topics_spec.rb[1:1]' --tag ~type:multisite --seed 35994
```
Also included:
* DEV: No need for locale reset (we do it anyway in rails_helper in `test_setup`)
This PR changes the `UserNotification` class to send outbound `user_private_message` using the group's SMTP settings, but only if:
* The first allowed_group on the topic has SMTP configured and enabled
* SiteSetting.enable_smtp is true
* The group does not have IMAP enabled, if this is enabled the `GroupSMTPMailer` handles things
The email is sent using the group's `email_username` as both the `from` and `reply-to` address, so when the user replies from their email it will go through the group's SMTP inbox, which needs to have email forwarding set up to send the message on to a location (such as a hosted site email address like meta@discoursemail.com) where it can be POSTed into discourse's handle_mail route.
Also includes a fix to `EmailReceiver#group_incoming_emails_regex` to include the `group.email_username` so the group does not get a staged user created and invited to the topic (which was a problem for IMAP), as well as updating `Group.find_by_email` to find using the `email_username` as well for inbound emails with that as the TO address.
#### Note
This is safe to merge without impacting anyone seriously. If people had SMTP enabled for a group they would have IMAP enabled too currently, and that is a very small amount of users because IMAP is an alpha product, and also because the UserNotification change has a guard to make sure it is not used if IMAP is enabled for the group. The existing IMAP tests work, and I tested this functionality by manually POSTing replies to the SMTP address into my local discourse.
There will probably be more work needed on this, but it needs to be tested further in a real hosted environment to continue.
Users who use encoded slugs on their sites sometimes run into 500 error when pasting a link to another topic in a post. The problem happens when generating a backward "reflection" link that would appear in a linked topic. Link URL restricted on the database level to 500 chars in length. At first glance, it should work since we have a restriction on topic title length.
But it doesn't work when a site uses encoded slugs, like here (take a look at the URL). The link to a topic, in this case, can be much longer than 500 characters.
By the way, an error happens only when generating a "reflection" link and doesn't happen with a direct link, we truncate that link. It works because, in this case, the original long link is still present in the post body and can be used for navigation. But we can't do the same for backward "reflection" links (without rewriting their implementation), the whole link must be saved to the database.
The simplest and cleanest solution will be just to remove the restriction on the database level. Abuse is impossible here since we are already protected by the restriction on topic title length. There aren’t performance benefits in using length-constrained columns in Postgres, in fact, length-constrained columns need a few extra CPU cycles to check the length when storing data.
When a topic is fully merged into another topic we close it and schedule its deleting. But, because of a bug, if the merged topic contains some moderator actions or small actions it won't be merged. This change fixes this problem.
An important note: in general, we don't want to close a topic after moving posts if it still contains some regular posts or whispers. But when we are moving posts to a private message we don't want the notice about it to be publicly visible. So we use whispers with action_code == 'split_topic' instead of small_actions in such cases and we should ignore this specific kind of whispers when decide if we should close the merged topic.
Refactors `TrustLevel` and moves translations from server to client
Additional changes:
* "staff" and "admin" wasn't translatable in site settings
* it replaces a concatenated string with a translation
* uses translation for trust levels in users_by_trust_level report
* adds a DB migration to rename keys of translation overrides affected by this commit
Some specs failed when `LOAD_PLUGINS=1` was set while migrating the test DB and the narrative-bot plugin disabled the `send_welcome_message` site setting.
When a topic is fully merged into another topic we close it. Now we want also to set a timer for deleting this topic. By default, stub topics will be deleted in 7 days. Users can change this period or disable auto-deleting by setting the period to 0.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
The default `allow_title` column value is "true" for regular and leader badges. After we disable it in admin side the seed method enabling it again while upgrading. So we shouldn't do it for existing badges.
Discourse shouldn't dynamically calculate the path of uploads and optimized images after a file has been stored on disk or S3. Otherwise it might calculate the wrong path if the SHA1 or extension stored in the database doesn't match the actual file path.
Admins can visit an approved queued topic from the review queue by clicking their title. We no longer store the created post and topic ids in the reviewable's payload object. Instead, we set the `topic_id` and `target_id` attributes.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
When editing the first post for the topic we do two AJAX requests
to two separate controllers in this order:
PUT /t/topic-name
PUT /posts/2489523
This causes two post revisor calls, which end up triggering the
:post_edited DiscourseEvent twice. This is then picked up and sent
as a WebHook event twice. However we do not need to send a :post_edited
webhook event if the first post is being edited and topic_changed is
true from the :post_edited DiscourseEvent, because a second event will
shortly come through for just the post.
See https://meta.discourse.org/t/post-webhook-fires-two-times-on-post-edited-for-first-post-in-a-topic/162408
Continued on from https://github.com/discourse/discourse/pull/10590
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
Under certain conditions admins would miss messages when posting action in
topics where they have permission.
This also fixes an error where we would sometimes explode when publishing to
an empty group.
This is a recent regression introduced by https://github.com/discourse/discourse/pull/12937 which makes it so that when looking at a user profile that is not your own, specifically the category and tag notification settings, you would see your own settings instead of the target user. This is only a problem for admins because regular users cannot see these details for other users.
The issue was that we were using `scope` in the serializer, which refers to the current user, rather than using a scope for the target user via `Guardian.new(user)`.
However, on further inspection the `notification_levels_for` method for `TagUser` and `CategoryUser` did not actually need to be accepting an instance of Guardian, all that it was using it for was to check guardian.anonymous? which is just a fancy way of saying user.blank?. Changed this method to just accept a user instead and send the user in from the serializer.
Recalculating a ReviewableFlaggedPost's score after rejecting or ignoring it sets the score as 0, which means that we can't find them after reviewing. They don't surpass the minimum priority threshold and are hidden.
Additionally, we only want to use agreed flags when calculating the different priority thresholds.
The user may have changed their category or tag tracking settings since a topic was tracked/watched based on those settings in the past. In that case we need to alter the reason message we show them otherwise it is very confusing for the end user to be told they are tracking a topic because of a category, when they are no longer tracking that category.
For example: "You will see a count of new replies because you are tracking this category." becomes: "You will see a count of new replies because you were tracking this category in the past."
To do this, it was necessary to add tag and category tracking info to current user serializer. I improved the serializer code so it only does 3 SQL queries instead of 9 to get the tracking information for tags and categories for the current user.
* FEATURE: add support for like webhooks
Add support for like webhooks. Webhook events only send on user membership
in the defined webhook group filters.
This also fixes group webhook events, as before this was never used, and
the logic was not correct.
If the associated page of a remote url passed to `TopicEmber.new(remote_url)` contained a malformed link like: `<a href="(http://foo.bar)">Baz</a>` it would raise an uncaught exception:
```
Job exception: Invalid scheme format: (http
```
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
Adds a webhook to notify when a reviewable score is updated.
This is different from created or status changed as additional flags can
roll in and update the score without updating status. Useful for applications
looking to integrate in with Discourse's scores
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
When a user flags a post with the “Something Else” option, a PM between
the user and the moderators group is created. If no moderators reply to
the PM, when the flag is handled at /review, an auto-reply is created
for the PM. However, the PM is not archived, it stays in the inbox.
This commit ensures that the PM is archived for moderator group when no
moderator has replied to that PM.
* FEATURE: Review every post using the review queue.
If the `review_every_post` setting is enabled, posts created and edited by regular uses are sent to the review queue so staff can review them. We'll skip PMs and posts created or edited by TL4 or staff users.
Staff can choose to:
- Approve the post (nothing happens)
- Approve and restore the post (if deleted)
- Approve and unhide the post (if hidden)
- Reject and delete it
- Reject and keep deleted (if deleted)
- Reject and suspend the user
- Reject and silence the user
* Update config/locales/server.en.yml
Co-authored-by: Robin Ward <robin.ward@gmail.com>
Co-authored-by: Robin Ward <robin.ward@gmail.com>
Rails 6.1.3.1 deprecates a few API and has some internal changes that break our tests suite, so this commit fixes all the deprecations and errors and now Discourse should be fully compatible with Rails 6.1.3.1. We also have a new release of the rails_failover gem that's compatible with Rails 6.1.3.1.
Previously it would pluck 6 categories which the user had posted in, **then** order them. To select the **top 6** categories, we need to perform the ordering in the SQL query before the LIMIT
When invited by email, users will receive an invite URL which contains
a token. If that token is present when the invite is redeemed, their
account will be automatically activated.
* FIX: Use theme color for anchor icon
* FIX: Do not count anchor links
* FIX: Do not count hashtags links either
* DEV: Add tests for link_count
* FIX: Disable anchors in quotes and preview
* FIX: Try building some anchor slugs for unicode
* DEV: Fix tests
When posts are moved from one topic to another, the `topic_user.bookmarked` column for all users in the new and the old topic needs to be resynced, for example because a user bookmarks post 12 in topic 1, then it is moved to topic 2, the topic_user record for topic 1 should no longer be bookmarked. A background job has been added to sync the column for a specified topic, or for no topic at all, which does it for all topics like the migration.
Also includes a migration that we have run in the past to fix bad data.
----
This has been addressed in other places in the past:
https://github.com/discourse/discourse/pull/10211https://github.com/discourse/discourse/pull/10188
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to how Discourse processes JavaScript that comes with themes/components, and these refactors may break your JS customizations; see https://meta.discourse.org/t/upcoming-core-changes-that-may-break-some-themes-components-april-12/186252?u=osama for details on how you can check if your themes/components are affected and what you need to do to fix them.
This commit also improves theme error handling in Discourse. We will now be able to catch errors that occur when theme initializers are run and prevent them from breaking the site and other themes/components.
We introduced a cap on the number of bookmarks the user can add in be145ccf2f. However this has caused unintended side effects; when the `jobs/scheduled/bookmark_reminder_notifications.rb` runs we get this error for users who already had more bookmarks than the limit:
> Job exception: Validation failed: Sorry, you have too many bookmarks, visit #{url}/my/activity/bookmarks to remove some.
This is because the `clear_reminder!` call was triggering a bookmark validation, which raised an error because the user already had to many, holding up other reminders.
This PR also adds `max_bookmarks_per_user` hidden site setting (default 2000). This replaces the BOOKMARK_LIMIT const so we can raise it for certain sites.
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to internal code that's responsible for processing themes/components in Discourse, most notably:
* `<script type="text/discourse-plugin">` tags are automatically converted to modules.
* The `theme-settings` service is removed in favor of a simple `lib` file responsible for managing theme settings. This was done to allow us to register/lookup theme settings very early in our Ember app lifecycle and because there was no reason for it to be an Ember service.
These refactors should 100% backward compatible and invisible to theme developers.
Admins can use bulk invites to pre-populate user fields. The imported
CSV file must have a header with "email" column (first position) and
names of the user fields (exact match).
Under the hood, the bulk invite will create staged users and populate
the user fields of those.
Because bookmarks have both topic and post ID, when the post was moved into another topic the bookmark was still attached to the post but did not show in the UI. This PR makes it so the all topic IDs for bookmarks attached to a post are updated when a post is moved.
Also included is a migration to fix affected records (e.g. on Meta there are 20 affected records).
See: https://meta.discourse.org/t/improved-bookmarks-with-reminders/144542/203
When overriding the translation for i18n keys used in user notifications
like user_notifications.reply_by_email, errors were returned for
valid interpolation keys. Keys like topic_title_url_encoded are
supported, so no error should be raised.
https://meta.discourse.org/t/-/50305/7
This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
Currently the process of adding a custom image to badge is quite clunky; you have to upload your image to a topic, and then copy the image URL and pasting it in a text field. Besides being clucky, if the topic or post that contains the image is deleted, the image will be garbage-collected in a few days and the badge will lose the image because the application is not that the image is referenced by a badge.
This commit improves that by adding a proper image uploader widget for badge images.
It was used both when inviting from a topic page and when creating
invites with "Send to topic on first login", while it should be used
only in the former case.
When transitioning from a tag topic list e.g. /tag/alerts
to the / route the topic list was not reloaded because the
same preload key was used for both lists (topic_list_latest).
The topic list was only reloaded when clicking on the / route
a second time because then it is forced to reload.
In the topic list adapter, we call `PreloadStore.getAndRemove` to
get the topic lists:
534777f5fd/app/assets/javascripts/discourse/app/adapters/topic-list.js (L34-L41)
Now instead of both / and /tag/alerts sharing the same preload
key of `topic_list_latest`, the tag has a key of `topic_list_tag/alerts/l/latest`
This is not recommended. But if you have other protections in place for CSRF mitigation, you may wish to disable Discourse's implementation. This site setting is not visible in the UI, and must be changed via the console.
* FIX: Do not show expired invites under Pending tab
* DEV: Controller action was renamed in previous commit
* FEATURE: Add 'Expired' tab to invites
* FEATURE: Refresh model after removing expired invites
* FEATURE: Do not immediately add invite to the list
Opening the 'create-invite' modal used to automatically generate an
invite to reserve an invite link. If the user did not save it and
closed the modal, the invite would be destroyed. This operations caused
the invite list to change in the background and confuse users.
* FEATURE: Sort redeemed users by creation time
* UX: Improve show / hide advanced options link
* FIX: Show redeemed users even if invites were trashed
* UX: Change modal title when editing invite
* UX: Remove Get Link button
Users can get it from the edit modal
* FEATURE: Add limit for invite links generated by regular users
* FEATURE: Add option to skip email
* UX: Show better error messages
* FIX: Show "Invited by" even if invite was trashed
Follow up to 1fdfa13a099d8e46edd0c481b3aaaafe40455ced.
* FEATURE: Add button to save without sending email
Follow up to c86379a465f28a3cc64a4a8c939cf32cf2931659.
* DEV: Use a buffer to hold all changed data
* FEATURE: Close modal after save
* FEATURE: Rate limit resend invite email
* FEATURE: Make the save buttons smarter
* FEATURE: Do not always send email even for new invites
The Guardian object memoizes a list of allowed user fields. Normally this is fine because Guardian objects only persist for a single request. However, the WebHook class was memoizing a guardian at the class level. This meant that an app restart was required for changes to be reflected. Plus, the Guardian was being shared across all sites in a multisite instance.
Initializing a guardian is cheap, so we can manage without memoization here.
Mailing list mode can generate significant email volume, especially on sites with a large user base. Disable mailing list mode via site settings by default so sites don't experience an unexpectedly large cost from outgoing email.
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.
When `PostCreator` creates a new topic it loads the `allowed_groups` of the topic. `Fabricate` doesn't do that and that's why the existing spec worked even though it should have failed, because `PostAlerter#notify_group_summary` didn't create a notification for a non-fabricated topic.
`Topic#invite_group` added a new `TopicAllowedGroup` record without reloading `Topic.allowed_groups`. A subsequent call to `PostAlerter#notify_group_summary` didn't work because it didn't find the invited group in the topic's `allowed_groups` association.
Unactivated users that have posts cannot be deleted so we shouldn't
include them in the initial query to try and purge them. Otherwise we
are just loading up sidekiq with pointless work to be doing every day.
Without this change if there are 201 unactivated users to purge, but the
first 200 have posts, the 201st user will never be deleted even though
it is the only user that doesn't have a post and is actually the one
that should be deleted.
This switches to outputting a separate file for each theme component CSS
asset. We have separate CSS plugin files, separate JS files
(for plugins/themes/components), it makes sense to do the same for
component CSS assets.
Benefits:
- easier debugging
- fixes a regression with theme component sourcemaps
- changes to theme components are updated individually
With HTTP/2, there is also no performance downside to having additional
files in the initial request.
This switches to outputting a separate file for each theme component CSS
asset. We have separate CSS plugin files, separate JS files
(for plugins/themes/components), it makes sense to do the same for
component CSS assets.
Benefits:
- easier debugging
- fixes a regression with theme component sourcemaps
- changes to theme components are updated individually
With HTTP/2, there is also no performance downside to having additional
files in the initial request.
though other participants are not in allowed list)
If you create an allowlist of users who can PM you, and use the function
“Only specific users can send me private messages”, then you can’t be
added to group messages unless everyone in that message is already in
your allow list.
This commit allows user to be added to a group message even when other
participants are not in allowed list
If this test ran before the new SiteSettingsController spec from 8cd7c9b259, it would fail the run. We need to `dup` the array before calling `.clear` on the original
Previously when inheriting category auto-close settings for a topic, those settings were disrupted if another topic timer was assigned or if a topic was closed then manually re-opened.
This PR makes it so that when a topic is manually re-opened the topic auto-close settings are inherited from the category. However, they will now be based on the topic created_at date. As an example, for a topic with a category auto close hours setting of 72 (3 days):
* Topic was created on 2021-02-15 08:00
* Topic was closed on 2021-02-16 10:00
* Topic was opened again on 2021-02-17 06:00
Now, the topic will inherit the auto close timer again and will close automatically at **2021-02-18 08:00**, which is based on the creation date. If the current date and time is greater than the original auto-close time (e.g. we were at 2021-02-20 13:45) then no auto-close timer is created.
Note, this will not happen if the topic category auto-close setting is "based on last post".
Updating a topic's visibility did not increase or decrease the
topic_count of a category, but Category.update_stats does ignore
unlisted topics which resulted in inconsistencies when deleting
such topics.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
A more general, lower-level change in addition to #11950.
Most code paths already check if SSO is enabled or if local logins are disabled before trying to create an email invite.
This is a safety net to ensure no invalid invites sneak by.
Also includes:
FIX: Don't allow to bulk invite when SSO is on (or when local logins are disabled)
This mirrors can_invite_to_forum? and other email invite code paths.
Using "UrlHelper#absolute" returns the S3 URL, which is fine for the client because it modifies it to use the CDN instead. On the other hand, this replacement doesn't happen when the URL is server-side rendered, returning a 403 for the system's avatar.
This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
Not when doing a site-wide search like we do in the Directory.
This solves the following specfailure:
1) DirectoryItemsController with data finds user by name
Failure/Error: expect(json['directory_items'].length).to eq(1)
expected: 1
got: 0
(compared using ==)
# ./spec/requests/directory_items_controller_spec.rb:88:in `block (3 levels) in <main>'
# ./spec/rails_helper.rb:271:in `block (2 levels) in <top (required)>'
# ./bundle/ruby/2.7.0/gems/webmock-3.11.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
When doing a user search (eg. when mentioning a user) we will not prioritie
users who hasn't been seen in over a year.
REFACTOR the user-search specs to be more precise regarding the ordering
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
Moves the topic timer jobs from being scheduled ahead of time with enqueue_at to a 5 minute scheduled run like bookmark reminders, in a new job called Jobs::EnqueueTopicTimers. Backwards compatibility is maintained by checking if an existing topic timer job is enqueued in sidekiq for the timer, and if it is not running it inside the new job.
The functionality to close/open a topic if it is in the opposite state still remains in the after_save block of TopicTimer, with further commentary, which is used for Open/Close Temporarily.
This also removes the ensure_consistency! functionality of topic timers as it is no longer needed; the new job will always pick up the timers because they are not stored in a fragile state of sidekiq.
This PR fixes a race condition with the IMAP notification code. In the `Email::Receiver` we call the `NewPostManager` to create the post and enqueue jobs and sends alerts via `PostAlerter`. However, if the post alerter reaches the `notify_pm_users` and the `group_notifying_via_smtp` method _before_ the incoming email is updated with the post and topic, we unnecessarily send a notification to the person who just posted. The result of this is that the IMAP syncer re-imports the email sent to the user about their own post, which looks like this in the group inbox:
To fix this, we skip the jobs enqueued by `NewPostManager` and only enqueue them with `PostJobsEnqueuer` manually _after_ the incoming email record has been updated with the post and topic.
Other improvements:
* Moved code to calculate email addresses from `IncomingEmail` records into the topic, with a group passed in, for easier testing and debugging. It is not the responsibility of the post alerter to figure this stuff out.
* Add shortcut methods on `IncomingEmail` to split or provide an empty array for to and cc addresses to avoid repetition.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
Splits the `ToggleTopicClosed` job into two distinct `OpenTopic` and `CloseTopic` jobs to make the code clearer. The old job cannot be deleted yet because of outstanding sidekiq schedules, so a todo has been added to do so later this year.
Also replaced mentions of `topic_status_update` with `topic_timer` in some files, because the `topic_status_update` model is obsolete and replaced by topic timer.
Added some shortcut methods for checking if a topic is open/whether a user can change an open topic.
* FIX: 'false' value was treated as a truthy value
For example, latest.json?no_subcategories=false used to have set
no_subcategories to the string value of 'false', which is not false.
* DEV: Remove dead code
* FIX: Redirect to /none under the right conditions
These conditions are:
- neither /all or /none present
- only for default filter
* FIX: Build correct topic list filter
/none was never added to the topic list filter
* FIX: Do not show count for subcategories if 'none' category
* FIX: preload_key must contain /none if no_subcategories
* DEV: More robust processing of URLs
The previous `UrlHelper.encode_component(CGI.unescapeHTML(UrlHelper.unencode(uri))` method would naively process URLs, which could result in a badly formed response.
`Addressable::URI.normalized_encode(uri)` appears to deal with these edge-cases in a more robust way.
* DEV: onebox should use UrlHelper
* DEV: fix spec
* DEV: Escape output when rendering local links
Notification is created by a job. If the job is evaluated before changes are committed to a database, a notification will have an incorrect URL.
Therefore, the job should be lodged in enqueue_jobs method which is triggered after the transaction:
```ruby
Topic.transaction do
move_posts_to topic
end
add_allowed_users(participants) if participants.present? && @move_to_pm
enqueue_jobs(topic)
```
I improved a little bit specs to ensure that the destination topic_id is set. However, that tests are passing even without code improvements. I couldn't find an easy way to "delay" database transaction.
Meta: https://meta.discourse.org/t/bug-with-notifications-for-moved-posts/168937
When the invite was being redeemed and the ReviewableUser record status
for the invited user was not pending an error was being raised.
This commit makes sure that we are only looking for ReviewableUser
record with status pending and updates that to approved.
Force pushing a commit to a theme repository used to break the updater,
because the system was not able to count the commits behind the old and
new version. This operation failed because a force push deleted the old
commits.
The user was prompted with a simple "500 server error" message.
* FIX: Store Reviewable's force_review as a boolean.
Using the `force_review` flag raises the score to hit the minimum visibility threshold. This strategy turned out to be ineffective on sites with a high number of flags, where these values could rapidly fluctuate.
This change adds a `force_review` column on the reviewables table and modifies the `Reviewable#list_for` method to show these items when passing the `status: :pending` option, even if the score is not high enough. ReviewableQueuedPosts and ReviewableUsers are always created using this option.
This commit adds an additional find_user_by_email hook to ManagedAuthenticator so that GitHub login can continue to support secondary email addresses
The github_user_infos table will be dropped in a follow-up commit.
This is the last core authenticator to be migrated to ManagedAuthenticator 🎉
It used to simply say "not allowed" without giving any hint what the
problem could be. This commit refactors the code and tries to improve
readability.
There is a site setting reply_by_email_enabled which when combined with reply_by_email_address creates a Reply-To header in emails in the format "test+%{reply_key}@test.com" along with a PostReplyKey record, so when replying Discourse knows where to route the reply.
However this conflicts with the IMAP implementation. Since we are sending the email for a group via SMTP and from their actual email account, we want all replys to go to that email account as well so the IMAP sync job can pick them up and put them in the correct place. So if the group has IMAP enabled and configured, then the reply-to header will be correct.
This PR also makes a further fix to 64b0b50 by using the correct recipient user for the PostReplyKey record. If the post user is used we encounter this error:
if destination.user_id != user.id && !forwarded_reply_key?(destination, user)
raise ReplyUserNotMatchingError, "post_reply_key.user_id => #{destination.user_id.inspect}, user.id => #{user.id.inspect}"
end
This is because the user above is found from the from_address, but the destination which is the PostReplyKey is made by the post.user, which will be different people.
* PERF: we don't need to use a huge image to test thumbnails
Generating images with 5000x5000 dimensions is an expensive operation.
Using smaller images reduce the time of model spec from 11s to 3s and integration spec from 6s to 2s.
Resending an invite moved the expire date in the future, but did not
invalidate it. For example, if an invite was sent to an email,
invalidated and then resent, it would still be left invalidated.
This consolidates logic used to match routes in ApiKey, UserApiKey and DefaultCurrentUserProvider. This reduces duplicated logic, and will allow UserApiKeysScope to easily re-use the parameter matching logic from ApiKeyScope
When posts or topics are deleted we don't want to immediately delete associated bookmarks, so we have a grace period to recover them and their reminders if the post or topic is un-deleted. This PR adds a task to the Weekly scheduled job to go and delete bookmarks attached to posts or topics deleted > 3 days ago.
Creates a BabelHelper builder using a default list of plugins, to ensure the transpiled code is always using the same plugins instead of differents plugins in different cases.
Previously, any errors in those files would e.g. blow up the update process in docker_manager.
Now it prints out an error and proceeds as if there was no compatibility file.
Includes:
* DEV: Extract setup_git_repo
* DEV: Use `Dir.mktmpdir`
* DEV: Default to `main` branch (The latest versions of git already do this, so to avoid problems do this by default)
DEV: Replace instances of Discourse.base_uri with Discourse.base_path
This is clearer because the base_uri is actually just a path prefix. This continues the work started in 555f467.
Previously this site setting `embed unlisted` defaulted to false and
empty topics would be generated for embed, but those topics tend to take
up a lot of room on the topic lists.
This new default creates invisible topics by default until they receive
their first reply.
Upload.secure_media_url? raised an exceptions when the URL was invalid,
which was a issue in some situations where secure media URLs must be
removed.
For example, sending digests used PrettyText.strip_secure_media,
which used Upload.secure_media_url? to replace secure media with
placeholders. If the URL was invalid, then an exception would be raised
and left unhandled.
Now instead in UrlHelper.rails_route_from_url we return nil if there is something wrong with the URL.
Co-authored-by: Bianca Nenciu <nenciu.bianca@gmail.com>
Extracted commonly used spec helpers into spec/support/uploads_helpers.rb, removed unused stubs and let definitions. Makes it easier to write new S3-related specs without copy and pasting setup steps from other specs.
This is intended for use by plugins which are building their own topic lists, and want to include PMs alongside regular topics (e.g. discourse-assign). It does not get used directly in core.
This PR removes the user reminder topic timers, because that system has been supplanted and improved by bookmark reminders. The option is removed from the UI and all existing user reminder topic timers are migrated to bookmark reminders.
Migration does this:
* Get all topic_timers with status_type 5 (reminders)
* Gets all bookmarks where the user ID and topic ID match
* Loops through the found topic timers
* If there is no bookmark for the OP of the topic, then we just create a bookmark with a reminder
* If there is a bookmark for the OP of the topic and it does **not** have a reminder set, then just
update it with the topic timer reminder
* If there is a bookmark for the OP of the topic with a reminder then just discard the topic timer
* Cancels all outstanding user reminder topic timers
* **Trashes (not deletes) all user reminder topic timers**
Notes:
* For now I have left the user reminder topic timer job class in place; this is so the jobs can be cancelled in the migration. It and the specs will be deleted in the next PR.
* At a later date I will write a migration to delete all trashed user topic timers. They are not deleted here in case there are data issues and they need to be recovered.
* A future PR will change the UI of the topic timer modal to make it look more like the bookmark modal.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
This reverts commit 7fc7090. And fixed the spec test fails.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
We must guarantee that "rel=noopener" was set if "target=_blank" is present, which is not always the case for trusted users. Also, if the link contains the "nofollow" attribute, it has to have the "ugc" attribute as well.
If a user always read all group messages, we will never update the
`first_pm_unread_at` column since the previous query will not return the
group_user. Instead, we should update `first_pm_unread_at` to the
current timestamp if the user has read everything.
Follow-up to 9b75d95fc6
This commit is addressing an issue where it is possible that there could
be multiple topic timer jobs running to close a topic or a weird race
condition state causing a topic that was just closed to be re-opened.
By removing the logic from the Topic Timer model into the Topic Timer
controller endpoint we isolate the code that is used for setting an
auto-open or an auto-close timer to just that functionality making the
topic timer background jobs safer if multiple are running.
Possibly in the future if we would like this logic back in the model a
refactor will be needed where we actually pass in the auto-close and
auto-open action instead of mixing it with the close and open
action that is currently being passed to the controller.
Like "default watching" and "default tracking" categories option now the "regular" categories support is added. It will be useful for sites that are muted by default. The user option will be displayed only if `mute_all_categories_by_default` site setting is enabled.
Themes can now declare custom colors that get compiled in core's color definitions stylesheet, thus allowing themes to better support dark/light color schemes.
For example, if you need your theme to use tertiary for an element in a light color scheme and quaternary in a dark scheme, you can add the following SCSS to your theme's `color_definitions.scss` file:
```
:root {
--mytheme-tertiary-or-quaternary: #{dark-light-choose($tertiary, $quaternary)};
}
```
And then use the `--mytheme-tertiary-or-quaternary` variable as the color property of that element. You can also use this file to add color variables that use SCSS color transformation functions (lighten, darken, saturate, etc.) without compromising your theme's compatibility with different color schemes.
There is an fk to user_profile that can make destroying uploads fail
if they happen to be set as user profile.
This ensures we clear this information when destroying uploads.
There are more relationships, but this makes some more progress.
It's possible that the original topic image is broken in some form, so
we shouldn't try and generate a topic thumbnail for it. The fix will
prevent the generate_topic_thumbnails job being enqueued every time the
topic is viewed.
For sites that are configured to mute some or all categories and tags
for users by default, groups can now be configured to set members'
notification level to normal from the group manage UI.
Sometime parallel spec if failing with error:
```
NoMethodError:
undefined method `data' for nil:NilClass
# ./spec/models/topic_tracking_state_spec.rb:339:in `block (4 levels) in <main>'
```
I have a theory that it might be related to instance variables in before block
The UI prevents users from trying to create tags on topics when they
don't have permission, but if you are trying to add tags to a topic via
the API and you don't have permission before this change it would
silently succeed in creating the topic, but it wouldn't have any tags.
Now a 422 error will be returned with an error message when trying to
create a topic with tags when tagging is disabled or you don't have
enough trust level to add tags to a topic.
Bug report: https://meta.discourse.org/t/-/70525/14
Normally, secure media urls are linked like `/secure-media-uploads/...`. In this case, uploads were already being linked correctly.
But sometimes (e.g. when pulling hotlinked onebox images) secure media is referenced with a full domain name (`//example.com/secure-media-uploads`). This commit ensures that those uploads are also linked correctly.
* FEATURE: set notification levels when added to a group
This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
* Fixed an issue I introduced in the last PR where I am just archiving everything regardless of whether it is actually archived in Discourse man_facepalming
* Refactor group list_mailboxes IMAP code to use providers, add specs, and add provider code to get the correct prodivder
* DEV: Show message when cannot invite user to PM
When inviting a user to a PM return a message that says, "Sorry, this
user can't be invited." if they have been muted or are not in a users
allowed pm users list.
* Minor refactor & improved some text
This changes PG text search to only match the given title against
lexemes that are formed from the title. Likewise, the given raw will
only be matched against lexemes that are formed from the post's raw.
* Added scopes UI
* Create scopes when creating a new API key
* Show scopes on the API key show route
* Apply scopes on API requests
* Extend scopes from plugins
* Add missing scopes. A mapping can be associated with multiple controller actions
* Only send scopes if the use global key option is disabled. Use the discourse plugin registry to add new scopes
* Add not null validations and index for api_key_id
* Annotate model
* DEV: Move default mappings to ApiKeyScope
* Remove unused attribute and improve UI for existing keys
* Support multiple parameters separated by a comma
It's possible through an import or other means to have images larger
than the current max allowed image size in the db.
If this happens the thumbnail generation job will keep running
indefinitely trying to download a new copy of the original but
discarding it because it is larger than the max_file_size eventually
causing this error
`Job exception: undefined method `path' for nil:NilClass`
because the newly downloaded image is now nil.
This fix stops the enqueuing of the `GenerateTopicThumbnails` job for
all images that happen to be larger than the max image size.
If any value, including nil, is passed in as an argument the default
won't be set, so we need to handle when a non-Array value is passed in
to the `generate_thumbnails!` method.
`OptimizedImage#filesize` calls `Discourse.store.download` with an OptimizedImage as an argument. It would in turn attempt to call `#original_filename` and `#secure?` on that object. Both would fail as these methods do not exist on OptimizedImage, only on Upload. We didn't know about these issues because:
1. `#calculate_filesize` is not called often, because the filesize is saved on OptimizedImage creation, so it's used mostly for manual filesize recalculation
2. we were using `rescue nil` which swallows all errors
When rebaking a post we were invalidating _regular_ oneboxes but not inline oneboxes.
DEV: also renamed 'InlineOneboxer.purge' to 'InlineOneboxer.invalidate' to keep
the API consistent with 'Oneboxer.invalidate'
#b19dcac2 improved the serializer so it sends default notification
levels to users to work around cases where a category edit would
would result in clients being left with invalid notification state
Unfortunately this did not address the root issue.
When we edit categories we publish state to multiple users this
means that the serializer is executed unscoped with no user.
The client already handles this case per:
dcad720a4c/app/assets/javascripts/discourse/app/models/site.js (L119-L119)
If a property is not shipped to it, it will leave it alone on the
existing category.
This fix ensures that these wide category info updates do not
include notification state to avoid corruption of local state.
If `default email digest frequency` was set to "Never", users would get
a `digest_after_minutes` set to `nil` which triggered this error
in the logs if/when the site eventually changed that setting and
enabled digests:
```
NoMethodError (undefined method `>=' for nil:NilClass)
/var/www/discourse/app/mailers/user_notifications.rb:227:in `digest'
```
Hostname can vary per-site on a multisite cluster, so this change requires converting the compiler_version from a constant into a class method which is evaluated at runtime. The value is stored in the theme DistributedCache, so performance impact should be negligible.
We previously did not account for completely untagged topics when
looking at muted tags, this caused new/unread counts to be off if
1. You had muted tags
2. You had an unread/new topic
3. This topic had no tags
This feature allows certain plugins to output tag information
to topic tracking state, this allows per tag stats which can be
used by sidebars and other plugins that need per tag stats
Not enabled by default cause this would add cost to a critical
query
Previously we had a partial fix in place where non human users
were not allowed draft sequences, this left edges around where non
human users asked for drafts yet had none.
For example system could already have a few drafts in place.
This also removes and extensibility point we added that is not in use
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
* We now have a site setting "topic_excerpt_maxlength" that is used when the OP is created or revised to generate a topic excerpt.
* However, posts created before this setting was introduced cannot benefit from this change unless they are revised, and if the topic excerpt length setting is changed that situation is also not covererd.
* This PR makes a change to rebake! to update the topic excerpt IF the post is the OP.
Adds a new topic_excerpt_maxlength site setting.
* When topic excerpt is requested for a post, use the new topic_excerpt_maxlength site setting to limit the size of the excerpt
* Remove code for getting/setting Post.excerpt_size as it is not used anywhere
* FIX: randomly falling user_spec
When we evaluate `update_last_seen!` we relay on Redis to not run that code too often
https://github.com/discourse/discourse/blob/master/app/models/user.rb#L753
The problem is that not all specs which are running `update_last_seen!` are not cleaning after themselves
For examples specs in that block https://github.com/discourse/discourse/blob/master/spec/models/user_spec.rb#L901
So it can be replicated when you run a few times
`bundle exec rspec ./spec/models/user_spec.rb -e "should not update the first seen value if it doesn't exist" -e "should have 0 for days_visited"`
We should delete Redis key after each spec which is evaluating `update_last_seen!`
Previously the code was very race condition prone leading to
odd failures in production
It was re-written in raw SQL to avoid conditions where rows
conflict on inserts
There is no clean way in ActiveRecord to do:
Insert, on conflict do nothing and return existing id.
This also increases test coverage, we were previously not testing
the code responsible for crawling external sites directly
We were getting errors like this in Reviewables in some cases:
```
ActiveRecord::StatementInvalid (PG::AmbiguousColumn: ERROR: column reference "category_id" is ambiguous
LINE 4: ...TRUE) OR (reviewable_by_group_id IN (NULL))) AND (category_i...
```
The problem that was making everything go boom is that plugins can add their own custom filters for Reviewables. If one is doing an INNER JOIN on topics, which has its own category_id column, we would get the above AmbiguousColumn error. The solution here is to just make all references to the reviewable columns in the list_for and viewable_by code prefixed by the table name e.g. reviewables.category_id.
Previously we only changed sequence on ownership change, this
cause a race condition between tabs where user could type for a
long time without being warned of an out of date draft.
This change is a radical change and we should watch closely.
Code was already in place to track sequence on the client so no
changes are needed there.
Locale files get precompiled after deployment and they contained translations from the `default_locale`. That's especially bad in multisites, because the initial `default_locale` is `en_US`. Sites where the `default_locale` isn't `en_US` could see missing translations. The same thing could happen when users are allowed to chose a different locale.
This change simplifies the logic by not using the `default_locale` in the locale chain. It always falls back to `en` in case of missing translations.
We were sharing `Discourse` both as an application object and a
namespace which complicated things for Ember CLI. This patch
moves raw templates into `__DISCOURSE_RAW_TEMPLATES` and adds
a couple helper methods to create/remove them.
This introduces new APIs for obtaining optimized thumbnails for topics. There are a few building blocks required for this:
- Introduces new `image_upload_id` columns on the `posts` and `topics` table. This replaces the old `image_url` column, which means that thumbnails are now restricted to uploads. Hotlinked thumbnails are no longer possible. In normal use (with pull_hotlinked_images enabled), this has no noticeable impact
- A migration attempts to match existing urls to upload records. If a match cannot be found then the posts will be queued for rebake
- Optimized thumbnails are generated during post_process_cooked. If thumbnails are missing when serializing a topic list, then a sidekiq job is queued
- Topic lists and topics now include a `thumbnails` key, which includes all the available images:
```
"thumbnails": [
{
"max_width": null,
"max_height": null,
"url": "//example.com/original-image.png",
"width": 1380,
"height": 1840
},
{
"max_width": 1024,
"max_height": 1024,
"url": "//example.com/optimized-image.png",
"width": 768,
"height": 1024
}
]
```
- Themes can request additional thumbnail sizes by using a modifier in their `about.json` file:
```
"modifiers": {
"topic_thumbnail_sizes": [
[200, 200],
[800, 800]
],
...
```
Remember that these are generated asynchronously, so your theme should include logic to fallback to other available thumbnails if your requested size has not yet been generated
- Two new raw plugin outlets are introduced, to improve the customisability of the topic list. `topic-list-before-columns` and `topic-list-before-link`
Recently, we added feature that we are sending `/muted` to users who muted specific topic just before `/latest` so the client knows to ignore those messages - https://github.com/discourse/discourse/pull/9482
Same `/muted` message should be included when the post is edited
Previously we relied entirely on levenshtein_distance_spammer_emails site
setting to handle "similar looking" emails.
This commit improves the situation by always preferring to block (and check)
canonical emails.
This means that if:
`samevil+test@domain.com` is blocked the system will block `samevil@domain.com`
This means that `samevil+2@domain.com` (ad infinitum) will be blocked
* When copying the markdown for an image between posts, we were not adding the srcset and data-small-image attributes which are done by calling optimize_image! in cooked post processor
* Refactored the code which was confusing in its current state (the consider_for_reuse method was super confusing) and fixed the issue
* FEATURE: don't display new/unread notification for muted topics
Currently, even if user mute topic, when a new reply to that topic arrives, the user will get "See 1 new or updated topic" message. After clicking on that link, nothing is visible (because the topic is muted)
To solve that problem, we will send background message to all users who recently muted that topic that update is coming and they can ignore the next message about that topic.
Within 24 hours of signing up, new users were losing their
default trust level of 3. With this fix, demotions from
trust level 3 won't happen when the "default trust level"
setting is 3 or 4.
If the feature is enabled, staff members can construct a URL and publish a
topic for others to browse without the regular Discourse chrome.
This is useful if you want to use Discourse like a CMS and publish
topics as articles, which can then be embedded into other systems.
It wasn't intended that people should be able to earn trust level
3 without participating in public topics. When counting topic
views and likes given/received, don't count private topics.
Users noticed that sometimes, avatar from Gravatar is not correctly updated - https://meta.discourse.org/t/updated-image-on-gravatar-not-seeing-it-update-on-site/54357
A potential reason for that is that even if you update your avatar in Gravatar, URL stays the same and if the cache is involved, service is still receiving the old photo.
For example. In my case, when I click the button to refresh avatar the
new Upload record is created with `origin` URL to new avatar, and `url` to
old one
I made some tests in the rails console and adding random param to Gravatar URL is deceiving cache and correct, the newest avatar is downloaded
Previously all topic posters would be added which could lead to major performance issues. Now if there are too many posters, only the acting user will be added as a participant.
Introduce the concept of "high priority notifications" which include PM and bookmark reminder notifications. Now bookmark reminder notifications act in the same way as PM notifications (float to top of recent list, show in the green bubble) and most instances of unread_private_messages in the UI have been replaced with unread_high_priority_notifications.
The user email digest is changed to just have a section about unread high priority notifications, the unread PM section has been removed.
A high_priority boolean column has been added to the Notification table and relevant indices added to account for it.
unread_private_messages has been kept on the User model purely for backwards compat, but now just returns unread_high_priority_notifications count so this may cause some inconsistencies in the UI.
* FEATURE: add setting `auto_approve_email_domains` to auto approve users
This commit adds a new site setting `auto_approve_email_domains` to
auto approve users based on their email address domain.
Note that if a domain already exists in `email_domains_whitelist` then
`auto_approve_email_domains` needs to be duplicated there as well,
since users won’t be able to register with email address that is
not allowed in `email_domains_whitelist`.
* Update config/locales/server.en.yml
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
This adds rubocop-rspec, and enables some cops that were either already passing or are passing now, after fixing them in this commit.
Some new cops are disabled for now, with annotation: "TODO" or "To be decided". Those either need to be discussed first, or require manual changes, or the number of found and fixed offenses is too large to bundle them up in a single PR.
Includes:
* DEV: Update rubocop's `TargetRubyVersion` to 2.6
* DEV: Enable RSpec/VoidExpect
* DEV: Enable RSpec/SharedContext
* DEV: Enable RSpec/EmptyExampleGroup (Removed an obsolete empty spec file)
* DEV: Enable RSpec/ItBehavesLike
* DEV: Remove RSpec/ScatteredLet (It's too strict, as it doesn't recognize fab! as a let-like)
* DEV: Remove RSpec/MultipleExpectations
If the “secure media” site setting is enabled then ALL files uploaded to Discourse (images, video, audio, pdf, txt, zip etc. etc.) will follow the secure media rules. The “prevent anons from downloading files” setting will no longer have any bearing on upload security. Basically, the feature will more appropriately be called “secure uploads” instead of “secure media”.
This is being done because there are communities out there that would like all attachments and media to be secure based on category rules but still allow anonymous users to download attachments in public places, which is not possible in the current arrangement.
New `duration` attribute is introduced for the `set_or_create_timer` method in the commit aad12822b7 for "based on last post" and "auto delete replies" topic timers.
* DEV: Replace User.unstage and User#unstage API with User#unstage!
Quoting @SamSaffron:
> User.unstage mixes concerns of both unstaging users and updating params which is fragile/surprising.
> u.unstage destroys notifications and raises a user_unstaged event prior to the user becoming unstaged and the user object being saved.
User#unstage! no longer updates user attributes and saves the object before triggering the `user_unstaged` event.
* Update one more spec
* Assign attributes after unstaging
Having a tag be a member of a tag group and the group's parent tag at
the same time causes some unexpected behavior. When a tag is assigned
as the parent, remove it from the group.
Adds 3 config values that allow to set a custom provider of Gravatar-like API accessible from gravatar_base_url. The gravatar_name is purely cosmetic, but helps with associating name with the service that actually provides the avatars. gravatar_login_url is a link relative to gravatar_base_url, which provides the user with the login to the Gravatar service
* This PR implements the scheduling and notification system for bookmark reminders. Every 5 minutes a schedule runs to check any reminders that need to be sent before now, limited to **300** reminders at a time. Any leftover reminders will be sent in the next run. This is to avoid having to deal with fickle sidekiq and reminders in the far-flung future, which would necessitate having a background job anyway to clean up any missing `enqueue_at` reminders.
* If a reminder is sent its `reminder_at` time is cleared and the `reminder_last_sent_at` time is filled in. Notifications are only user-level notifications for now.
* All JavaScript and frontend code related to displaying the bookmark reminder notification is contained here. The reminder functionality is now re-enabled in the bookmark modal as well.
* This PR also implements the "Remind me next time I am at my desktop" bookmark reminder functionality. When the user is on a mobile device they are able to select this option. When they choose this option we set a key in Redis saying they have a pending at desktop reminder. The next time they change devices we check if the new device is desktop, and if it is we send reminders using a DistributedMutex. There is also a job to ensure consistency of these reminders in Redis (in case Redis drops the ball) and the at desktop reminders expire after 20 days.
* Also in this PR is a fix to delete all Bookmarks for a user via `UserDestroyer`
There are three modifiers:
- serialize_topic_excerpts (boolean)
- csp_extensions (array of strings)
- svg_icons (array of strings)
When multiple themes are active, the values will be combined. The combination method varies based on the setting. CSP/SVG arrays will be combined. serialize_topic_excerpts will use `Enumerable#any`.
Introduces a new site setting `max_notifications_per_user`.
Out-of-the-box this is set to 10,000. If a user exceeds this number of
notifications, we will delete the oldest notifications keeping only 10,000.
To disable this safeguard set the setting to 0.
Enforcement happens weekly.
This is in place to protect the system from pathological states where a
single user has enormous amounts of notifications causing various queries
to time out. In practice nobody looks back more than a few hundred notifications.
* Attachments (non media files) were being marked as secure if just
SiteSetting.prevent_anons_from_downloading_files was enabled. this
was not correct as nothing should be marked as actually "secure" in
the DB without that site setting enabled
* Also add a proper standalone spec file for the upload security class
If a group mention could be notified on preview it was given an `<a>`
tag with the `.notify` class. When cooked it would display differently.
This patch makes the server side cooking match the client preview.
Further on from my earlier PR #8973 also reject upload as secure if its origin URL contains images/emoji. We still check Emoji.all first to try and be canonical.
This may be a little heavy handed (e.g. if an external URL followed this same path it would be a false positive), but there are a lot of emoji aliases where the actual Emoji url is something, but you can have another image that should not be secure that that thing is an alias for. For example slight_smile.png does not show up in Emoji.all BUT slightly_smiling_face does, and it aliases slight_smile e.g. /images/emoji/twitter/slight_smile.png?v=9 and /images/emoji/twitter/slightly_smiling_face.png?v=9 are equivalent.
Sometimes PullHotlinkedImages pulls down a site emoji and creates a new upload record for it. In the cases where these happen the upload is not created via the normal path that custom emoji follows, so we need to check in UploadSecurity whether the origin of the upload is based on a regular site emoji. If it is we never want to mark it as secure (we don't want emoji not accessible from other posts because of secure media).
This only became apparent because the uploads:ensure_correct_acl rake task uses UploadSecurity to check whether an upload should be secure, which would have marked a whole bunch of regular-old-emojis as secure.
* Because custom emoji count as post "uploads" we were
marking them as secure when updating the secure status for post uploads.
* We were also giving them an access control post id, which meant
broken image previews from 403 errors in the admin custom emoji list.
* We now check if an upload is used as a custom emoji and do not
assign the access control post + never mark as secure.
This is not used in core or official plugins, and has been printing a deprecation notice since v2.3.0beta4. All OpenID 2.0 code and dependencies have been dropped. The user_open_ids table remains for now, in case anyone has missed the deprecation notice, and needs to migrate their data.
Context at https://meta.discourse.org/t/-/113249
Previously you'd get a server side generic error due to a password check
failing. Now the input element has a maxlength attribute and the server
side will respond with a nicer error message if the value is too long.
If our reply tree somehow ends up with cycles or other odd
structures, we only want to consider a reply once, at the first
level in the tree that it appears.
* DEV: Add data-notification-level attribute to category UI
* Show muted categories on the category page by default
This reverts commit ed9c21e42c.
* Remove redundant spec - muted categories are now visible by default
It seems in some situations replies have been moved to other topics but
the `PostReply` table has not been updated. I will try and fix this in a
follow up PR, but for now this fix ensures that every time we ask a post
for its replies that we restrict it to the same topic.
* the spec to check if changing the topic between PM and
public to see if the upload security status is changed
is already covered extensively in topic_upload_security_manager_spec.rb
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
Regression was created here:
https://github.com/discourse/discourse/pull/8750
When tag or category is added and the user is watching that category/tag
we changed notification type to `edited` instead of `new post`.
However, the logic here should be a little bit more sophisticated.
If the user has already seen the post, notification should be `edited`.
However, when user hasn't yet seen post, notification should be "new
reply". The case for that is when for example topic is under private
category and set for publishing later. In that case, we modify an
existing topic, however, for a user, it is like a new post.
Discussion on meta:
https://meta.discourse.org/t/publication-of-timed-topics-dont-trigger-new-topic-notifications/139335/13
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
There is a feature, that when tag or category is added to the topic,
customers who are watching that category or tag are notified.
The problem is that it is using default notification type "new post"
It would be better to use "new post" only when there really is a new
post and "edited" when categories or tags were modified.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
6e1fe22 introduced the possiblity for category_users to have a NULL notification_level, so that we can store `last_seen_at` dates without locking the notification level. At the time, this did not affect the topic-tracking-state query. However, the query changes in f434de2 introduced a slight change in behavior.
Previously, a subquery would look for a category_user with notification_level=mute. f434de2 refactored this to remove the subquery, and inverted some of the logic to suit.
The new query checked for `notification_level <> :muted`. If `notification_level` is NULL, this comparison will return NULL. In this scenario, notification_level=NULL means that we should fall back to the default tracking level (regular), and so we want the expression to resolve as true, not false. There was already a check for the existence of the category_users row, but it did not check for the existence of a NOT NULL notification_level.
This commit amends the expression so that the notification_level will only be compared if it is non-null.
* FIX: bulk insert to create application requests
* FIX: bulk insert to create topics
* FIX: no need to create separate user for each topic, post etc.
* FIX: Another bulk_insert of ApplicationRequests
* FIX: dont create user and topic instances when not neccessary
* FIX: merge examples with expensive setup into one example
Previously, categories without any topics were being excluded from the UPDATE query. This means the counter gets stuck, and the category cannot be deleted. This change ensures that the counters get correctly set to zero.
Restore tl3 reachability by calculating penalty counts vs unsuspend/unsilence.
Only count unsuspend or unsilences that have been made by a user other than
the Discourse system user.
API keys are now only visible when first created. After that, only the first four characters are stored in the database for identification, along with an sha256 hash of the full key. This makes key usage easier to audit, and ensures attackers would not have access to the live site in the event of a database leak.
This makes the merge lower risk, because we have some time to revert if needed. Once the change is confirmed to be working, we will add a second commit to drop the `key` column.
We like to stay as close as possible to latest with rubocop cause the cops
get better.
This update required some code changes, specifically the default is to avoid
explicit returns where implicit is done
Also this renames a few rules
When the tag is muted and topic contains that tag, we should not mark that message as NEW.
There are 3 possible settings which site admin can set.
remove_muted_tags_from_latest - always
It means that if the topic got at least one muted tag, we should not mark that topic as NEW
remove_muted_tags_from_latest - only muted
Similar to above, however, if at least one tag is not muted, the topic is marked as NEW
remove_muted_tags_from_latest - never
Basically, mute tag setting is ignored and all topics are set as NEW
Previously it was unclear why certain gems are being held back cause Gemfile
had no comment explaining it.
I tried to add some explanation from memory and remove some exceptions that
seemed to be superfluous.
This upgrades shoulda to latest, it appears to work once a couple of assertions
are removed
Also update http accept language used to auto detect language from http header
this is tested
Zeitwerk small update seems fine
This feature adds the ability to define synonyms for tags, and the ability to merge one tag into another while keeping it as a synonym. For example, tags named "js" and "java-script" can be synonyms of "javascript". When searching and creating topics using synonyms, they will be mapped to the base tag.
Along with this change is a new UI found on each tag's page (for example, `/tags/javascript`) where more information about the tag can be shown. It will list the synonyms, which categories it's restricted to (if any), and which tag groups it belongs to (if tag group names are public on the `/tags` page by enabling the "tags listed by group" setting). Staff users will be able to manage tags in this UI, merge tags, and add/remove synonyms.
* FEATURE: Ability to add components to all themes
This is the first and functional step from that topic https://dev.discourse.org/t/adding-a-theme-component-is-too-much-work/15398/16
The idea here is that when a new component is added, the user can easily assign it to all themes (parents).
To achieve that, I needed to change a site-setting component to accept `setDefaultValues` action and `setDefaultValuesLabel` translated label.
Also, I needed to add `allowAny` option to disable that for theme selector.
I also refactored backend to accept both parent and child ids with one method to avoid duplication (Renamed `add_child_theme!` to more general `add_relative_theme!`)
* FIX: Improvement after code review
* FIX: Improvement after code review2
* FIX: use mapBy and filterBy directly
When uploading a file to a theme component, and that file is existing and has already been marked as secure, we now automatically mark the file as secure: false, change the ACL, and log the action as the user (also rebake the posts for the upload)
PG 12 changes internals in a subtle way, time jitter is noticed in a few new
spots (which is normal) and default ordering is a bit different which is meant
to be random anyway.
* Add timezone to user_options table
* Also migrate existing timezone values from UserCustomField,
which is where the discourse-calendar plugin is storing them
* Allow user to change their core timezone from Profile
* Auto guess & set timezone on login & invite accept & signup
* Serialize user_options.timezone for group members. this is so discourse-group-timezones can access the core user timezone, as it is being removed in discourse-calendar.
* Annotate user_option with timezone
* Validate timezone values
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
Previously people were not consistent about mocking which left internals in
a fragile state when running subfolder specs.
This introduces a simple helper `set_subfolder` which you can use to set
the subfolder for the spec. It takes care of proper configuration of subfolder
and teardown.
```
# usage
set_subfolder "/my_amazing_subfolder"
```
You should no longer stub base_uri or global_settings
* Fix user title logic when badge name customized
* Fix an issue where a user's title was not considered a badge granted title when the user used a badge for their title and the badge name was customized. this affected the effectiveness of revoke_ungranted_titles! which only operates on badge_granted_titles.
* When a user's title is set now it is considered a badge_granted_title if the badge name OR the badge custom name from TranslationOverride is the same as the title
* When a user's badge is revoked we now also revoke their title if the user's title matches the badge name OR the badge custom name from TranslationOverride
* Add a user history log when the title is revoked to remove confusion about why titles are revoked
* Add granted_title_badge_id to user_profile, now when we set badge_granted_title on a user profile when updating a user's title based on a badge, we also remember which badge matched the title
* When badge name (or custom text) changes update titles of users in a background job
* When the name of a badge changes, or in the case of system badges when their custom translation text changes, then we need to update the title of all corresponding users who have a badge_granted_title and matching granted_title_badge_id. In the case of system badges we need to first get the proper badge ID based on the translation key e.g. badges.regular.name
* Add migration to backfill all granted_title_badge_ids for both normal badge name titles and titles using custom badge text.
Instead of enabling `suppress_from_latest` setting on many categories now we can enable `mute_all_categories_by_default` site setting. Then users should opt-in to categories for them to appear in the latest and categories pages.
- Allow revoking keys without deleting them
- Auto-revoke keys after a period of no use (default 6 months)
- Allow multiple keys per user
- Allow attaching a description to each key, for easier auditing
- Log changes to keys in the staff action log
- Move all key management to one place, and improve the UI
This is a major change to draft internals. Previously there were quite a
few cases where the draft system would say "draft saved", when in fact
we just skipped saving.
This commit ensures the draft system deals with draft ownership handover in
a predictable way.
For example:
- Window 1 editing draft
- Window 2 editing same draft at the same time
Previously we would allow window 1 and 2 to just fight on the same draft
each window overwriting the same draft over an over.
This commit introduces an ownership concept where either window 1 or 2 win
and user is prompted on the loser window to reload screen to correct the issue
This also corrects edge cases where a user could have multiple browser windows
open and posts in 1 window, later to post in the second window. Previously
drafts would break in the second window, this corrects it.
Break up single large example into multiple examples, using fab! to maintain performance. On my machine, this speeds up the test slightly, and also makes it more readable.
Doing .pluck(:column).first is a very common pattern in Discourse and in
most cases, a limit cause isn't being added. Instead of adding a limit
clause to all these callsites, this commit adds two new methods to
ActiveRecord::Relation:
pluck_first, equivalent to limit(1).pluck(*columns).first
and pluck_first! which, like other finder methods, raises an exception
when no record is found
Under exceptional situations the automatic draft feature can fail.
This new **hidden, default off** site setting
`backup_drafts_to_pm_length` will automatically backup any draft that is
saved by the system to a dedicated PM (originating from self)
The body of that PM will contain the text of the reply.
We can enable this feature strategically on sites exhibiting issues to
diagnose issues with the draft system and offer a recourse to users who
appear to lose drafts. We automatically checkpoint these drafts every 5
minutes forcing a new revision each 5 minutes so you can revert to old
content.
Longer term we are considering automatically enabling this kind of feature
for extremely long drafts where the risk is really high one could lose
days of writing.
When a category has a subcategory, we ensure that no one who can see the
subcategory cannot see the parent. However, we don't take into account
the fact that, when no CategoryGroups exist, the default is that
everyone has full permissions.
Moving posts also moves the read state (`topic_users` table) to the destination topic. This changes that behavior so that only users who posted in the destination topic will have the original notification level (probably "watching") of the original topic. The notification level for all other users will be set to "regular".
Previously the 'local_cdn_url' method didn't returned the correct cdn url. So we written few incorrect spec tests too.\n\nf92a6f7ac5228342177bf089d269e2f69a69e2f5
When an admin changes the site setting slug_generation_method to
encoded, we weren't really encoding the slug, but just allowing non-ascii
characters in the slug (unicode).
That brings problems when a user posts a link to topic without the slug, as
our topic controller tries to redirect the user to the correct URL that contains
the slug with unicode characters. Having unicode in the Location header in a
response is a RFC violation and some browsers end up in a redirection loop.
Bug report: https://meta.discourse.org/t/-/125371?u=falco
This commit also checks if a site uses encoded slugs and clear all saved slugs
in the db so they can be regenerated using an onceoff job.
Post timings are created by `topic_id` and `post_number` and it's possible that the destination topic already contains post timings for non-existent posts. For example, this can happen if the destination topic was previously split and Discourse recorded post timings for moved posts in the destination topic.
This commit ensures that all timings which reference non-existent posts are deleted from the destination topic before the posts are moved.
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
Adds 2 factor authentication method via second factor security keys over [web authn](https://developer.mozilla.org/en-US/docs/Web/API/Web_Authentication_API).
Allows a user to authenticate a second factor on login, login-via-email, admin-login, and change password routes. Adds registration area within existing user second factor preferences to register multiple security keys. Supports both external (yubikey) and built-in (macOS/android fingerprint readers).
Currently, the topic is only validated for censored words and should be validated for blocked words as well.
Blocked word validation is now used by both Post and Topic. To avoid code duplication, I extracted blocked words validation code into separate Validator, and use it in both places.
The only downside is that even if the topic contains blocked words validation message is saying "Your post contains a word that's not allowed: tomato" but I think this is descriptive enough.
Forums without previously calculated scores would return the same values
for low/medium/high sensitivity. Now those are scaled based on the
default value.
The default value has also been changed from 10.0 to 12.5 based on
observing data from live discourse forums.
Prior to the new review queue there were a couple special cases where
posts would be auto hidden:
* If a TL3 or above flagged a TL0 post as spam
* If a TL4 or above flagged a non-staff, non-TL4 post as spam, inappropriate or off
topic.
These cases are now removed in favour of the scoring system.
The URL '/images/transparent.png' will be used in the cooked content if upload record not found. In that case we have to use 'short_url' as image src in 'post.each_upload_url' method.
* FIX: User should get notified when a post is deleted
* FEATURE: Notify posters when restoring flagged posts
* Fix typo
Co-Authored-By: Régis Hanol <regis@hanol.fr>
* Improve tests
* The read indicator now shows up when no member has read the last post of the topic (written by a non-member)
* The read indicator works on mobile and receives live updates from message bus
* The icon we display in the topic list was changed
* Added a title to the indicator to indicate its purpose when hovering over it
The client-side theme-selector would always apply the first in a series of file change notifications. This has been fixed, so it now applies the most recent notification.
Duplicate notifications were being sent because
- The remote_theme autosave was causing every change notification to be doubled
- Color scheme change notifications were being sent every time a theme was uploaded, even if the colors were unchanged
These duplicate notifications have been fixed, and a spec added to ensure it does not regress in future
When activating a user via an external provider, this would cause the "this account is not activated" message to show on the first attempt, even though the account had been activated correctly.
* Revert "Revert "FEATURE: Publish read state on group messages. (#7989) [Undo revert] (#8024)""
This reverts commit 36425eb9f0.
* Fix: Show who read only if the attribute is enabled
* PERF: Precalculate the last post readed by a group member
* Use book-reader icon instear of far-eye
* FIX: update topic groups correctly
* DEV: Tidy up read indicator update on write
This change allows themes and components access to theme assets.
This means that inside theme js you can now get the URL for an asset with:
```
settings.theme_uploads.name
```
* Reenable: "FEATURE: Publish read state on group messages. (#7989)"
This reverts commit 67f5cc1ce8.
* FIX: Read indicator only appears when the group setting is enabled
* Enable or disable read state based on group attribute
* When read state needs to be published, the minimum unread count is calculated in the topic query. This way, we can know if someone reads the last post
* The option can be enabled/disabled from the UI
* The read indicator will live-updated using message bus
* Show read indicator on every post
* The read indicator now shows read count and can be expanded to see user avatars
* Read count gets updated everytime someone reads a message
* Simplify topic-list read indicator logic
* Unsubscribe from message bus on willDestroyElement, removed unnecesarry values from post-menu, and added a comment to explain where does minimum_unread_count comes from
Previously we relied on side effects to set tracking state correctly
when inviting groups to messages
Also has a minor optimisation in that we use pluck instead of pulling in
full record
Previously we would unconditionally issue an "invited_to_pm" notification
to all non muting users.
New behavior
- Watching and Watching first post get notified
- Tracking get a new "summary" message
- The rest get nothing
This is consistent with topic creation and way clearer
If enabled, this will fire a webhook whenever a user's notification has
been created. This could potentially be a lot of data depending on your
forum, and should be used carefully since it includes everything all users
will see in their feeds.
There are 5 visibility levels (similar to group visibility)
public (default)
logged-in users
members only
staff
owners
Admins & group owners always have visibility to group members.
Theme developers can now add any of the transformed color variables to their color scheme in about.json. For example
```
"color_schemes": {
"Light": {
"primary": "333333",
"secondary": "ffffff",
"primary-low": "ff0000"
}
},
```
would override the primary-low variable when compiling SCSS for the color scheme. The primary-low variable will also be visible in administrator color palette UI.
If a post is flagged after an action was already performed on it, it
will update the previous Reviable instance and not create a new one.
The notification logic was implemented in the :create callback which was
completely skipped in this case.
There are situations where depending on site settings, actions could be
taken due to flags (for example, hiding a post) but those actions were
not visibile in the review queue due to visibility settings.
This patch makes sure that the minimum score required for an action such
as hiding a post needs to meet the visibility for a moderator to see it.
This feature allows @ mentions to prioritize showing members of a group who
have explicit permission to a category.
This makes it far easier to @ mention group member when composing topics in
categories where only the group has access.
For example:
If Sam, Jane an Joan have access to bugs category.
Then `@` will auto complete to (jane,joan,sam) ordered on last seen at
This feature works on new topics and existing topics. There is an explicit
exclusion of trust level 0,1,2 groups cause they get too big.
* UX: Rename "Keep Post" to "Keep Post Hidden" when hidden
This is based on this feedback:
https://meta.discourse.org/t/category-group-review-moderation/116478/19
When a post is hidden this makes the operation much more clear.
* REFACTOR: Better support for aliases for actions
Allow calls on alias actions and delegate to the original one.
This is less code but also simplifies tests where the action might
be "agree_and_keep" or "agree_and_keep_hidden" which are the same.
When `SiteSetting.embed_truncate` is enabled (by default), the truncated
string is mutatable and does not raise an error.
However, when the setting is disabled, the `contents` string is frozen
and immutable, and will raise a `FrozenError`.
No need to let notifications stay around when users can't access
a topic after it was converted into a PM or posts were moved
into a restricted topic.
Also makes sure that moving to a new topic correctly uses the
guardian for the first post by enqueuing jobs outside of a
transaction.
Previously, users who had any penalties (were silenced or suspended)
were not allowed to promote to Trust Level 3.
There is also a more subtle change here: if users were silenced or
suspended and then the operation was reverted (user was un-silenced
or un-suspended), then it would have been like the user was never
penalized in the first place. This is no longer the case. To forgive a
user earlier, administrators can use "Clear Penalty History" feature.
Lastly, Jobs::UnsilenceUsers will automatically unsilence any users who
should no longer be silenced (silenced_till < now()). This made it so
silence_count - unsilence_count == 0 for any user who is not silenced,
which defeated the purpose of this TL3 requirement.
DEV: deprecate `invite.via_email` in favor of `invite.emailed_status`
This commit adds a new column `emailed_status` in `invites` table for
tracking email sending status.
0 - not required
1 - pending
2 - bulk pending
3 - sending
4 - sent
For normal email invites, invite record is created with emailed_status
set to 'pending'.
When bulk invites are sent invite record is created with emailed_status
set to 'bulk pending'.
For invites that generates link, invite record is created with
emailed_status set to 'not required'.
When invite email is in queue emailed_status is updated to 'sending'
Once the email is sent via `InviteEmail` job the invite emailed_status
is updated to 'sent'.
This is a low severity security fix because it requires a logged in
admin user to update a site setting via the API directly to an invalid
value.
The fix adds validation for the affected site settings, as well as a
secondary fix to prevent injection in the event of bad data somehow
already exists.
Context: https://meta.discourse.org/t/121589
This new setting option lets group owners message/mention large groups
without granting that privilege to all members.
Groups can now be marked as visible to "logged on users". All automatic groups (except `everyone`) are now visible to "logged on users", previously they were marked as public but suppressed in the group page for non-staff.
This allows you to temporarily disable components without having to remove them from a theme.
This feature is very handy when doing quick fix engineering.
Previously users were still allowed to create topic via API even if
uncategorized was disabled.
Not 100% happy with all this special casing, but I guess we have to do
something.
This also splits up a mega spec now that we have fab! into a more easy to
understand structure (I hope)
* Remove unused method
* Prefabricate user in category_user_spec.rb
* FIX: Remove notification_level from category_users unique indexes
* FIX: CategoryUser#batch_set wasn't updating pre-existing records
* Improve tests for CategoryUser#batch_set
* FIX: changed was being reported incorrectly
* DEV: Rewrote query to do a bulk insert
* DEV: remove unnecessary parentheses
We now treat any external_id of blank string (" " or " " or "", etc) or a
invalid word (none, nil, blank, null) - case insensitive - as invalid.
In this case the client will see "please contact admin" the logs will explain
the reason clearly.
- Correct create_category_definition to skip validations and use a
transaction, no longer able to create corrupt topics
- ensure_consistency now clears topic_id if pointing at deleted or missing
topic_id
- Stop creating category definition topics for uncategorized
You can now add javascript files under `/javascripts/*` in a theme, and they will be loaded as if they were included in core, or a plugin. If you give something the same name as a core/plugin file, it will be overridden. Support file extensions are `.js.es6`, `.hbs` and `.raw.hbs`.
This is an attempt to fix the flaky:
```
1) Jobs::Onceoff can run all once off jobs without errors
Failure/Error: self.locale_no_cache = value
I18n::InvalidLocale:
:bar is not a valid locale
# ./lib/freedom_patches/translate_accelerator.rb:193:in `locale='
# ./app/jobs/onceoff/clean_up_user_export_topics.rb:7:in `block in execute_onceoff'
# ./app/jobs/onceoff/clean_up_user_export_topics.rb:6:in `map'
# ./app/jobs/onceoff/clean_up_user_export_topics.rb:6:in `execute_onceoff'
# ./spec/integrity/onceoff_integrity_spec.rb:13:in `block (3 levels) in <main>'
# ./spec/integrity/onceoff_integrity_spec.rb:12:in `each'
# ./spec/integrity/onceoff_integrity_spec.rb:12:in `block (2 levels) in <main>'
```
This feature allows end users to "defer" topics by marking them unread
The functionality is default disabled. This also introduces the new site
setting default_other_enable_defer: to enable this by default on new user
accounts.
* FEATURE: detect theme errors and catch them
* Bump COMPILER_VERSION
* Feedback
* Override eslint no console for one line
* Can't use our ajax method
* remove emoji from translation file
The issue here was that, with prefabrication, bumped_at was being
persisted and then loaded and the DB was storing it with less precision
than the object state.
We were blocking user registrations with same username and password,
but allowing usernames to be changed to be same as password later.
Also disallow names to be the same as password.
There was a race condition when 2 invites existed for 1 user where in some
cases data from both invites would be used for the redeem. Depending on DB
ordering.
Fix is to delete duplicate invites earlier in the process prior to
`redeem_from_email` being called.
