Chat mobile has separate routes for channels and direct messages. However on desktop we want to prevent these routes from being accessible as they aren't intended to be used by chat in full-page or drawer mode on desktop.
We had two issues which were present for a long time I think:
- one that impacts both core discourse and chat. We were not setting top on the header when `footer-nav-ipad` was present, meaning that you could make it scroll under if you try to scroll up by putting your finger on the discourse header
- one that impacted only chat. It's also present in core, but in core it's not a probem because we don't have a fixed height div. The body height was higher than the screen which would cause a second scrollbar to appear and would slightly break layout, if you scroll on this scrollbar (body).
* UX: increase font-size of last message + decrease emoji size
* UX: decrease size of username emoji
* UX: Mobile chat index cleanup
* UX: decrease size of chat-channel-title in thead list
Chat should follow the same convention as topics, where invalid mentions
are not styled the same as valid mentions. This PR makes chat use such styling.
I'm following the same pattern that we use for invalid mentions in posts –
9bd6523581/app/assets/stylesheets/common/base/topic-post.scss (L1285-L1288)
This way it'll be easier to dry it up if we decide to do that at some point.
We've changed access settings to be group membership based rather than based on the TL value directly. We kept both conditions here while we updated any plugins and themes. It should now be safe to remove.
This commit adds a link to the original message of a thread, this link will:
- load the channel message and highlight it while keeping thread panel open on desktop
- open the channel and highlight the message in mobile (and close thread panel, as mobile never shows channel and thread in the same view)
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
Since https://github.com/discourse/discourse/pull/25501 this behavior was broken. This PR attempts to fix it by being more fine grain.
Also note that this PR is moving `footer-nav-ipad` and `footer-nav-visible` to the `html` element and not the `body`. It makes more sense as we are already adding most of other global state class like `keyboard-visible` to the `html` element.
Tested on:
- chrome desktop
- safari ios - iphone
- PWA ios - iphone
- PWA ios - ipad
- DiscourseHub iphone
This commit sets a default of 0px for `--footer-nav-height` and set it only when `body.footer-nav-visible` allowing us to safely use `--footer-nav-height` wherever it will be needed if set.
We usually don't enforce foreign key relationships on the database level.
Because of that, occasionally it's possible to see a chat message that
references to a non-existent chat_channel or user. MessagesExporter
failed in such case before, this PR fixes that.
When reaching the top of a thread, the full thread title will be displayed if it was too long to fit.
It works in mobile, drawer mode, and fullscreen.
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
For performance reasons we don't automatically add fabricated users to trust level auto-groups. However, when explicitly passing a trust level to the fabricator, in 99% of cases it means that trust level is relevant for the test, and we need the groups.
This change makes it so that when a trust level is explicitly passed to the fabricator, the auto-groups are refreshed. There's no longer a need to also pass refresh_auto_groups: true, which means clearer tests, fewer mistakes, and less confusion.
This change adds notification badges to the new footer tabs on mobile chat, to help users easily find areas where there’s new activity to review.
When on mobile chat:
- Show a badge on the DMs footer when there is unread activity in DMs.
- Show a badge on the Channels footer tab when there is unread channel activity.
- Show a badge on the Threads footer tab when there is unread activity in a followed thread.
- Notification badges should be removed once the unread activity is viewed.
Additionally this change will:
- Show green notification badges for channel mentions or DMs
- Show blue notification badges for unread messages in channels or threads
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
The value [Yesterday] was a fixed string which couldn't be translated. Also removes nextWeek/nextDay which make no sense for dates which are always supposed to be in the past.
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_level_to_tag_topics site setting to tag_topic_allowed_groups.
We have all these calls to Group.refresh_automatic_groups! littered throughout the tests. Including tests that are seemingly unrelated to groups. This is because automatic group memberships aren't fabricated when making a vanilla user. There are two places where you'd want to use this:
You have fabricated a user that needs a certain trust level (which is now based on group membership.)
You need the system user to have a certain trust level.
In the first case, we can pass refresh_auto_groups: true to the fabricator instead. This is a more lightweight operation that only considers a single user, instead of all users in all groups.
The second case is no longer a thing after #25400.
Having the admin sidebar code in an instance initializer is not
ideal because:
* It runs during app boot which may not even be necessary based on site settings
* It makes it hard for plugins to register additional links in time without resorting
to before/after initializer gymnastics
This PR moves the admin sidebar into a lib and creates the panel
in custom-sections.js, then the sections and links are loaded when
the main sidebar component is rendered, which leaves plugins enough
time to add additional links in an initializer.
---------
Co-authored-by: David Taylor <david@taylorhq.com>
Fixes an issue with delayed rendering of the My Threads tab in chat mobile footer.
Previously we made an ajax request to determine the number of threads a user had before rendering the tab, however it is much faster (and better UX) if we can rely on a site setting for this.
The new chat_threads_enabled site setting is set to true when the site has chat channels with threading enabled.
This bug was causing broken layout when using the `header_dropdown` setting instead of `sidebar` as we were rendering `<div class="channels-list"></div>` two times.
In normal use, this `text()` getter is never called. However, when running with the Ember inspector, it is eagerly evaluated and hits throws the "not implemented" error in the base class.
* FIX: Minor bookmark issues
* We were showing "missing %{name} value" when the name for the
bookmark was undefined with title translations
* There was no way to see the bookmark details on hover in chat
for a message where the bookmark icon was in the left gutter.
We can show the title on the bookmark button in the chat message
actions instead.
* Minor fix
* DEV: Test fix
Due to an incorrect test the previous service was incorrectly implementing the map, and was most importantly not deleting the state when reaching bottom.
It was broken on iOS PWA, when you had the keyboard open and would leave the app. When you came back the body was scrolled and it was looking buggy until you close/reopen keyboard.
This commit attempt to reposition the page correctly 200ms after the tab is visible again.
This commit creates a shared implementation of the dates computation and moves all the logic (new messages since last visit and dates separator into one single component <ChatMessageSeparator />).
The frontend tests have been removed and only a single system spec has been added for threads as everything is sharing the same implementation and the existing channel specs should catch any regression.
Allows users to create DMs by selecting groups as a target. It also allows adding user groups to an existing chat
- When creating the channel, it expands the user group and adds all its members with chat enabled to the channel.
- After creation, there's no difference between adding a group or adding its members individually.
- Users can add multiple groups and users simultaneously.
- There are UI validations; the member count preview updates according to the member count of added groups, and it does not allow users to add more members than SiteSetting.chat_max_direct_message_users."
At the moment, when someone is mentioning a group, or using here or
all mention, we create a chat_mention record per user. What we want
instead is to have special kinds of mentions, so we can create only one
chat_mention record in such cases. This PR implements that.
Note, that such mentions will still have N related notifications, one
notification per a user. We don't expect we'll have performance
problems on the notifications side, but if at some point we do, we
should be able to solve them on the side of notifications
(notifications are handled in jobs, also some little delays with
the notifications are acceptable, so we can make sure notifications
are properly queued, and that processing of every notification is
fast enough to make delays small enough).
The preparation work for this PR was done in fbd24fa, where we make
it possible for one mention to have several related notifications.
A pretty tricky part of this PR is schema and data migration, I've explained
related details inline on the migration files.
This change moves the "Channels" tab to first position in the chat footer nav, and loads it as the default page when opening chat for the first time on mobile.
This update adds three tabs to the bottom of the chat overlay to make it easier for users to navigate chat on mobile.
As a result of this change:
- Direct Messages are now shown separately from public channels on mobile
- My Threads has now moved from the channel list to it's own tab on mobile
- My Threads can still be accessed on desktop via the sidebar and within the drawer channel list
- Chat back button has been updated to navigate to the correct tab (for both channels and threads)
Some special cases:
- If DMs are not used then the tab is not rendered
- If the user has no threads then the tab is not rendered
- If both the tabs for DMs and Threads aren't available then the whole footer will not be rendered
- Chat footer is only shown on the listing pages (DMs, Channels, My Threads)
---------
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_level_to_tag_topics site setting to tag_topic_allowed_groups.
This commit:
- increased the size of chat-header-offset from 46px to 56px on mobile
- tweaked navbar padding
- Increased the gap between back button and title; this means no more perfect alignment, but I think that's perfectly fine and a fair trade off for an easier click target for the back button without fear of hitting the title
This regressed in 2791e75072. That commit
fixed subfolder URLs in general, but the `full_url` was adding the
subfolder prefix a second time, thus breaking this URL in emails.
Prior to this fix the number of users rendered by mentioned_users could equal the number of members in a channel which would be slow but could in more extreme case crash the page and/or server.
Some plugins have names (e.g. discourse-x-yz) that
are totally different from what they are actually called,
and that causes issues when showing them in a sorted way
in the admin plugin list.
Now, we should use the setting category name from client.en.yml
if it exists, otherwise fall back to the name, for sorting.
This is what we do on the client to determine what text to
show for the plugin name as well.
This adds the following chat metrics:
- _chat_open_channels_with_threads_enabled_ — a count of open channels
where threading is enabled.
- _chat_channel_messages_ — a count of messages sent in a chat channel
(i.e. not a personal chat / direct message), within a thread or outside of a thread.
- _chat_threaded_messages_ — a count of messages sent within a thread
in a chat channel (i.e. not a personal chat / direct messages).
- _chat_direct_messages_ — a count of messages sent in a personal chat / direct messages.
The metrics added using the plugin API introduced in 098ab29d,
and extended in d91456fd.
Note that these stats won't be exposed at the `about.json`
and the `site/statistics.json` routes.
Fixes a flaky test by ensuring Capybara finishes loading the topic page before attempting to open chat. The back to forum url relies on a tracked property (previous url), which is set when visiting the topic page.
Why this change?
The assertion does not make use of Capybara's waiting strategy and is
not really testing anything meaningful by asserting for the src of the
img element.
When validating with a dynamic set of values, especially one that might change during runtime, we should use a lambda or a proc to ensure that the validation uses the most up-to-date set of values. This is particularly important when using config.eager_load = true, which can cause some elements to be loaded only once at startup, thus not reflecting changes made at runtime.
This was the root cause of the issues here, as we were adding more ReviewableScore types after initial load through: `register_reviewable_type Chat::ReviewableMessage`
Small visual improvements for chat header on mobile:
- makes the Back to Forum target size slightly narrower
- makes the text color consistent between header and back button (and d-icon)
- makes the chat heading bold
Why this change?
We have been running into flaky tests which seems to be related to
AR transaction problems. However, we are not able to reproduce this
locally and do not have sufficient information on our builds now to
debug the problem.
What does this change do?
Noe the following changes only applies when `ENV["GITHUB_ACTIONS"]` is
present.
This change introduces an RSpec around hook when `capture_log: true` has
been set for a test. The responsibility of the hook is to capture the
ActiveRecord debug logs and print them out.
This change simplifies the layout of our header when chat is open on mobile. The search icon and hamburger menu icons are also hidden and the Discourse logo is replaced by a ← Forum link to make it easier to continue where you left off within the forum (prior to this update the user could only go back to the forum index page).
Why this change?
When running system tests on our CI, we have been occasionally seeing
server errors like:
```
Error encountered while proccessing /stylesheets/desktop_e58cf7f686aab173f9b778797f241913c2833c39.css
NoMethodError: undefined method `+' for nil:NilClass
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/path/pattern.rb:139:in `[]'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:127:in `block (2 levels) in find_routes'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:126:in `each'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:126:in `each_with_index'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:126:in `block in find_routes'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:123:in `map!'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:123:in `find_routes'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/journey/router.rb:32:in `serve'
/__w/discourse/discourse/vendor/bundle/ruby/3.2.0/gems/actionpack-7.0.7/lib/action_dispatch/routing/route_set.rb:852:in `call'
```
While looking through various Rails issues related to the error above, I
came across https://github.com/rails/rails/pull/27647 which is a fix to
fully initialize routes before the first request is handled. However,
the routes are only fully initialize only if `config.eager_load` is set
to `true`. There is no reason why `config.eager_load` shouldn't be `true` in the
CI environment and this is what a new Rails 7.1 app is generated with.
What does this change do?
Enable `config.eager_load` when `env["CI"]` is present
This changes the Plugins link in the admin sidebar to
be a section instead, which then shows all enabled plugin
admin routes (which are custom routes some plugins e.g.
chat define).
This is done via adding some special preloaded data for
all controllers based on AdminController, and also specifically
on Admin::PluginsController, to have the routes loaded without
additional requests on page load.
We just use a cog for all the route icons for now...we don't
have anything better.
Why this change?
This is what `Capybara::Session#quit` does:
```
def quit
@driver.quit if @driver.respond_to? :quit
@document = @driver = nil
@touched = false
@server&.reset_error!
end
```
One notable thing is that it resets server errors which means that any
server errors encountered by a session is cleared. That is not what we
want since it hides errors even though `Capybara.raise_server_errors`
has been set to `true`.
## Back button to navigate out of add-member area
Currently on mobile, once you're in the member area, there is no easy to return to the general settings area, except exiting the settings altogether, which isn't very user friendly. A go-back link solves the problem.
## Styling tweaks
* Removed the background from the leave button
* Added more spacing between the sections on desktop and removed the fixed height for rows
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This PR is a reworked version of https://github.com/discourse/discourse/pull/24670.
In chat, we need the ability to have several notifications per `chat_mention`.
Currently, we have one_to_one relationship between `chat_mentions` and `notifications`:
d7a09fb08d/plugins/chat/app/models/chat/mention.rb (L9)
We want to have one_to_many relationship. This PR implements that by introducing
a join table between `chat_mentions` and `notifications`.
The main motivation for this is that we want to solve some performance problems
with mentions that we're having now. Let's say a user sends a message with @ all
in a channel with 50 members, we do two things in this case at the moment:
- create 50 chat_mentions
- create 50 notifications
We don't want to change how notifications work in core, but we want to be more
efficient in chat, and create only 1 `chat_mention` which would link to 50 notifications.
Also note, that on the side of notifications, having a lot of notifications is not so
big problem, because notifications processing can be queued.
Apart from improving performance, this change will make the code design better.
Note that I've marked the old `chat_mention.notification_id` column as ignored, but
I'm not deleting it in this PR. We'll delete it later in https://github.com/discourse/discourse/pull/24800.
This new navbar component is used for every navbar in chat, full page or drawer, and any screen.
This commit also uses this opportunity to correctly decouple drawer-routes from full page routes. This will avoid having this kind of properties in components: `@includeHeader={{false}}`. The header is now defined in the parent template using a navbar. Each route has now its own template wrapped in a div of the name of the route, eg: `<div class="c-routes-threads">..</div>`.
The navbar API:
```gjs
<Navbar as |navbar|>
<navbar.BackButton />
<navbar.Title @title="Foo" />
<navbar.ChannelTitle @channel={{@channel}} />
<navbar.Actions as |action|>
<action.CloseThreadButton />
</navbar.Actions>
</navbar>
```
The full list of components is listed in `plugins/chat/assets/javascripts/discourse/components/navbar/index.gjs` and `plugins/chat/assets/javascripts/discourse/components/navbar/actions.gjs`.
Visually the header is not changing much, only in drawer mode the background has been removed.
This commit also introduces a `<List />` component to facilitate rendering lists in chat plugin.
Using min_trust_to_create_topic and create_topic_allowed_groups together was part of #24740
Now, when plugins specs are fixed, we can safely remove that part of logic.
We're changing the implementation of trust levels to use groups. Part of this is to have site settings that reference trust levels use groups instead. It converts the min_trust_to_flag_posts site setting to flag_post_allowed_groups.
Note: In the original setting, "posts" is plural. I have changed this to "post" singular in the new setting to match others.
- sticky doesn't work well with overflow: hidden parents. These overflows were used to hide other issues which shouldn't exist anyways. If it causes issues we should fix the root cause.
- our `--header-offset` is changing a lot on safari while scrolling, sometimes with very unexpected value like: negative or very high value, which causes the navbar to appear at unexpected positions for few ms, this commit is using the value of the header on insert and not changing it after, it shouldn't cause any issue.
This change converts the min_trust_to_edit_wiki_post site setting to edit_wiki_post_allowed_groups.
See: https://meta.discourse.org/t/283408
Hides the old setting
Adds the new site setting
Add a deprecation warning
Updates to use the new setting
Adds a migration to fill in the new setting if the old setting was changed
Adds an entry to the site_setting.keywords section
Updates tests to account for the new change
After a couple of months, we will remove the email_in_min_trust setting entirely.
Internal ref: /t/117248
We can also now control tabindex, and other html attributes, which allows to lick on the thread indicator but not tab to it for example.
By default the tabindex will be 0.
When navigating to /chat/threads we were not closing the side panel. It would not show as the route doesn't support it, but after if we would open a channel from the sidebar it would open the channel with an empty opened sidepanel .
This commit adds a new "My threads" link in sidebar and drawer. This link will open the "/chat/threads" page which contains all threads where the current user is a member. It's ordered by activity (unread and then last message created).
Moreover, the threads list of a channel page is now showing every threads of a channel, and not just the ones where you are a member.
Introduces the concept of image thumbnails in chat, prior to this we uploaded and used full size chat images within channels and direct messages.
The following changes are covered:
- Post processing of image uploads to create the thumbnail within Chat::MessageProcessor
- Extract responsive image ratios into CookedProcessorMixin (used for creating upload variations)
- Add thumbnail to upload serializer from plugin.rb
- Convert chat upload template to glimmer component using .gjs format
- Use thumbnail image within chat upload component (stores full size img in orig-src data attribute)
- Old uploads which don't have thumbnails will fallback to full size images in channels/DMs
- Update Magnific lightbox to use full size image when clicked
- Update Glimmer lightbox to use full size image (enables zooming for chat images)
I took the wrong approach here, need to rethink.
* Revert "FIX: Use Guardian.basic_user instead of new (anon) (#24705)"
This reverts commit 9057272ee2.
* Revert "DEV: Remove unnecessary method_missing from GuardianUser (#24735)"
This reverts commit a5d4bf6dd2.
* Revert "DEV: Improve Guardian devex (#24706)"
This reverts commit 77b6a038ba.
* Revert "FIX: Introduce Guardian::BasicUser for oneboxing checks (#24681)"
This reverts commit de983796e1.
This consistently fails on core now, see
https://github.com/discourse/discourse/actions/runs/7109919490/job/19355591619?pr=24738
Error: QUnit Test Failure: Browser Id 2 - Discourse Chat | Component | chat message collapser images: escapes link
not ok 444 Chrome 120.0 - [58 ms] - Browser Id 2 - Discourse Chat | Component | chat message collapser images: escapes link
---
actual: >
false
expected: >
true
stack: >
Expected value is %3Cscript%3Esomeeviltitle%3C/script%3E and actual value is
<script>someeviltitle</script>
c.f. de983796e1
There will soon be additional login_required checks
for Guardian, and the intent of many checks by automated
systems is better fulfilled by using BasicUser, which
simulates a logged in TL0 forum user, rather than an
anon user.
In some cases the use of anon still makes sense (e.g.
anonymous_cache), and in that case the more explicit
`Guardian.anon_user` is used
The previous query would look at the existing messages, count them, and update the associated thread.
But, if for some reason messages were **ALL** deleted without updating the `replies_count`, then the query wouldn't find any message, and wouldn't update any thread's `replies_count`.
We're seeing some deprecation warnings in production. This is because we're passing a raw Ruby timestamp, which gets stringified implicitly when written to Redis. As per #15842, this conversion needs to be done explicitly.
This outlet allows to redefine the button displayed when asking the user to join a channel.
The following outletArgs are sent to the outlet:
```
onJoinChannel
channel
icon
title
label
disabled
```
Prior to this fix direct message would always show "Chat in ..." when hovering the channel even if you were hovering a direct message channel with another user (or yourself).
We will now correctly show:
- `Chat in ...` for group channels
- `Chat with ...` for direct message channels
Previously the spec could be flakey as the long message could show on the screen while we await for processing. Now we will first check to have the error message on screen, at this point the erroneous message should never be visible.
In other kind of channels we will only unfollow but for group channels we don't want people to keep appearing in members list.
This commit also creates appropriate services:
- `Chat::LeaveChannel`
- `Chat::UnfollowChannel`
And dedicated endpoint for unfollow: `DELETE /chat/api/channels/:id/memberships/me/follows`
This change refactors the check `user.groups.any?` and instead uses
`user.staged?` to check if the user is staged or not.
Also fixes several tests to ensure the users have their auto trust level
groups created.
Follow up to:
- 8a45f84277
- 447d9b2105
- c89edd9e86
This PR introduces thread support for channel archives. Now, threaded messages are rendered inside a `details` HTML tag in posts.
The transcript markdown rules now support two new attributes: `threadId` and `threadTitle`.
- If `threadId` is present, all nested `chat` tags are rendered inside the first one.
- `threadTitle` (optional) defines the summary content.
```
[chat threadId=19 ... ]
thread OM
[chat ... ]
thread reply
[/chat]
[/chat]
```
If threads are split across multiple posts when archiving, the range of messages in each part will be displayed alongside the thread title. For example: `(message 1 to 16 of 20)` and `(message 17 to 20 of 20)`.
This bug was very reproducible when your last read was a message you didn't read and an admin would delete it. When coming back to the channel you would get a not found, in this case we will now reset last read and present you the last message of the channel.
We could be more fancy and try to detect the next readable message but that would be more code and complexity for such a rare case.
Before this fix we would reset the input two times:
- right before sending message
- and after it's been sent
The second one is actually not necessary, and more over with the server delay the user could have started typing a new message and that would clear it.
Chat will now check for the state of `SiteSetting.private_email` when sending the summary, when enabled, the mail will not display user information, channel information other than the ID and no message information, only the count of messages.
Mentions and other post processing (like images) are still done asynchronously in the background. This should ensure reloading a channel while the message has not been processed yet doesn’t renders a blank message.
As a followup, we could probably simplify the staged message logic, given we have the new cooked on send.
This commit implements drafts for threads by adding a new `thread_id` column to `chat_drafts` table. This column is used to create draft keys on the frontend which are a compound key of the channel and the thread. If the draft is only for the channel, the key will be `c-${channelId}`, if for a thread: `c-${channelId}:t-${threadId}`.
This commit also moves the draft holder from the service to the channel or thread model. The current draft can now always be accessed by doing: `channel.draft` or `thread.draft`.
Other notable changes of this commit:
- moves ChatChannel to gjs
- moves ChatThread to gjs
* Remove checkmark for official plugins
* Add author for plugin, which is By Discourse for all discourse
and discourse-org github plugins
* Link to meta topic instead of github repo
* Add experimental flag for plugin metadata and show this as a
badge on the plugin list if present
---------
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
Fixes a minor issue where "Invalid date" is shown briefly
when sending a message in a chat thread. Change to use
`new Date()` instead like the channel staged message which
does not have this issue.
This PR refactors the following:
* leaving all the CSS applied to the old `modal-body` classes in their respective files
* made new clean styling for `.d-modal` and refactored the template to use the new BEM classes
* `inner-`, `middle-`, `outer-` container classes are gone and replaced with simplified `wrapper` and `container` classes
* use standardised max-sizes with modifiers `-large` and `-max`
* lighter backdrop,
* min-width to prevent puny modals
* other styling changes regarding padding, close button,…
* pulled out all modal overrides into a general `modal-overrides` file + cleanup of outdated CSS
* pulled out login and create account modal styling into their own file, cause it's such a big override
* removed old general login.scss file for mobile & desktop
* only kept some remainders I don't want to touch in `app/assets/stylesheets/common/base/login.scss`
Some of these files are quite small, and if we rename them in the same
commit where we inlined the template, Git may choose to see them as
different files. This commit forces Git to recognize the rename, which
will preserve the lineage of the refactored files.
Follow-up to #24278 that is slightly less trivial.
* Some were "trivial" usages that were missed in the previous PR because the same file that had at least one other non-trivial usage.
* These involve extra arguments or inheritance but I have checked that they seem correct.
In the vast majority of cases, people want poll voters to be public. Previously, the checkbox for this was hidden behind the 'show advanced' settings in the poll builder UI.
This commit makes three changes to improve the experience:
1. Add `public=true|false` to poll markup (previously it would only be added when true
2. Bring the 'public' switch outside the 'show advanced' section for improved visibility
3. Change the default to 'true'
- Remove vendored copy
- Update Rails implementation to look for language definitions in node_modules
- Use webpack-based dynamic import for hljs core
- Use browser-native dynamic import for site-specific language bundle (and fallback to webpack-based dynamic import in tests)
- Simplify markdown implementation to allow all languages into the `lang-{blah}` className
- Now that all languages are passed through, resolve aliases at runtime to avoid the need for the pre-built `highlightjs-aliases` index
Group channels will allow users to create channels with a name and invite people. It's possible to add people even after creation of the channel. Removing users is not yet possible but will be added in the near future.
Technically a group channel is `direct_message_channel` with a group attribute set to true on its direct message (chatable). This model might evolve in the future but offers much flexibility for now without having to rely on a complex migration.
The commit essentially consists of:
- a migration to set existing direct message channels with more than 2 users to a group
- a new message creator which allows to search, add members, and create groups
- a new `AddUsersToChannel` service
- a modified `SearchChatable` service
Fixes this problem that happens sometimes in specs:
> Mocha::StubbingError:
> #<Mock:0x135150> was instantiated in one test but it is receiving
invocations within another test. This can lead to unintended
interactions between tests and hence unexpected test failures. Ensure
that every test correctly cleans up any state that it introduces.
The most common thing that we do with fab! is:
fab!(:thing) { Fabricate(:thing) }
This commit adds a shorthand for this which is just simply:
fab!(:thing)
i.e. If you omit the block, then, by default, you'll get a `Fabricate`d object using the fabricator of the same name.
This adds the ability to collect stats without exposing them
among other stats via API.
The most important thing I wanted to achieve is to provide
an API where stats are not exposed by default, and a developer
has to explicitly specify that they should be
exposed (`expose_via_api: true`). Implementing an opposite
solution would be simpler, but that's less safe in terms of
potential security issues.
When working on this, I had to refactor the current solution.
I would go even further with the refactoring, but the next steps
seem to be going too far in changing the solution we have,
and that would also take more time. Two things that can be
improved in the future:
1. Data structures for holding stats can be further improved
2. Core stats are hard-coded in the About template (it's hard
to fix it without correcting data structures first, see point 1):
63a0700d45/app/views/about/index.html.erb (L61-L101)
The most significant refactorings are:
1. Introducing the `Stat` model
2. Aligning the way the core and the plugin stats' are registered
There is an edge case where the following occurs:
1. The user sets a bookmark reminder on a post/topic
2. The post/topic is changed to a PM before or after the reminder
fires, and the notification remains unread by the user
3. The user opens their bookmark reminder notification list
and they can still see the notification even though they cannot
access the topic anymore
There is a very low chance for information leaking here, since
the only thing that could be exposed is the topic title if it
changes to something sensitive.
This commit filters the bookmark unread notifications by using
the bookmarkable can_see? methods and also prevents sending
reminder notifications for bookmarks the user can no longer see.
When quoting a chat message in a post, if that message contains a mention,
that mention should be ignored. But we've been detecting them and sending
notifications to users. This PR fixes the problem. Since this fix is for
the chat plugin, I had to introduce a new API for plugins:
# We strip posts before detecting mentions, oneboxes, attachments etc.
# We strip those elements that shouldn't be detected. For example,
# a mention inside a quote should be ignored, so we strip it off.
# Using this API plugins can register their own post strippers.
def register_post_stripper(&block)
end
Subscriptions manager have been a pain since the beginning, one of the problem is that thread and channels behave mostly the same but with various small difference which I expect to increase over time.
Trying to use subclasses for this case has proven to be a mistake, this commit now uses a class for each case (channel, thread) which for now contains a lot of duplication, which might be reduced in the future but has the merit to make reasoning about each case very simple.
This refactor is fixing a bug introduced in 90efdd7f9d which was causing the wrong channel to be unsubscribed, this shouldn't be possible anymore. We had tests for this which were disabled due to flakeyness, I will consider re-enabling them in the future.
Other notes:
- notices had been added to the subscriptions manager service, they have been moved into their own dedicated service: `ChatChannelNoticesManager`
- the `(each model)` trick used in `<ChatChannel />` since 90efdd7f9d to ensure atomicity has been applied to `<ChatThread />` too
Chat redesign work to improve chat navigation:
- New header title with channel name (thread list on mobile)
- New header title without channel name (thread list on full page chat)
- Removes the close button on threads (mobile only)
- Updates to back button route within thread (mobile), taking user to:
- The thread index, if they accessed the thread from the thread index.
- The channel itself, if they accessed the thread directly from the channel.
- The channel itself, if they accessed the thread from a notification.
- Show thread title in chat drawer header
- Properly convert emoji in thread titles in chat header (all devices)
- Upgrades various templates to use gjs format.
With Embroider, we can rely on async `import()` to do the splitting
for us.
This commit extracts from `pretty-text` all the parts that are
meant to be loaded async into a new `discourse-markdown-it` package
that is also a V2 addon (meaning that all files are presumed unused
until they are imported, aka "static").
Mostly I tried to keep the very discourse specific stuff (accessing
site settings and loading plugin features) inside discourse proper,
while the new package aims to have some resembalance of a general
purpose library, a MarkdownIt++ if you will. It is far from perfect
because of how all the "options" stuff work but I think it's a good
start for more refactorings (clearing up the interfaces) to happen
later.
With this, pretty-text and app/lib/text are mostly a kitchen sink
of loosely related text processing utilities.
After the refactor, a lot more code related to setting up the
engine are now loaded lazily, which should be a pretty nice win. I
also noticed that we are currently pulling in the `xss` library at
initial load to power the "sanitize" stuff, but I suspect with a
similar refactoring effort those usages can be removed too. (See
also #23790).
This PR does not attempt to fix the sanitize issue, but I think it
sets things up on the right trajectory for that to happen later.
Co-authored-by: David Taylor <david@taylorhq.com>
This commit starts from a simple observation: cooking messages on the hot path can be slow. Especially with a lot of mentions.
To move cooking from the hot path, this commit has made the following changes:
- updating cooked, inserting mentions and notifying user of new mentions has been moved inside the `process_message` job. It happens right after the `Chat::MessageProcessor` run, which is where the cooking happens.
- the similar existing code in `rebake!` has also been moved to rely on the `process_message`job only
- refactored `create_mentions` and `update_mentions` into one single `upsert_mentions` which can be called invariably
- allows services to decide if their job is ran inline or later. It avoids to need to know you have to use `Jobs.run_immediately!` in this case, in tests it will be inline per default
- made various frontend changes to make the chat-channel component lifecycle clearer. we had to handle `did-update @channel` which was super awkward and creating bugs with listeners which the changes of the PR made clear in failing specs
- adds a new `-processed` (and `-not-processed`) class on the chat message, this is made to have a good lifecyle hook in system specs
When uploading images, they are assigned a dominant color which gets used in various places, such as Discourse Hub and the new lightbox. Previously in chat we didn't assign this attribute, so it was defaulting to a null value. We did however use it as an inline CSS style for the image background (which is visible while the image is downloaded).
This change adds data-dominant-color to the uploaded image in chat and uses it correctly within lightbox.
This is a follow-up to e6299a3. I additionally fixed these three things:
1. Since e6299a3 there's no need anymore to join the group_users table
when looking for users who were reached by a group mention, so
I removed that join in that commit. But turned out we were joining
the group_users table twice, so I removed the second join in this PR.
That drastically speeded up my test query, from 6 sec to 0.26 sec.
2. We also were joining twice the user_chat_channel_memebership table,
so I removed the second unnecessary join too.
3. We actually need to join the user_chat_channel_memebership table
only in certain cases, and we don't need to do that for group mentions,
so I fixed that too.
As a result of these changes, time of my test query fall down from
6 sec to 0.001 sec. And the resulting SQL query now contains only
one JOIN statement.
A follow-up to faac6773. This PR eliminates one more heavy join by forcing
Active Record to do two queries instead.
Also, along the way, I made this change:
```
# this generates two quries to the groups table
def groups_to_mention
@groups_to_mention = mentionable_groups - groups_with_too_many_members
end
# so I changed it to (this makes only one query to the groups table):
def groups_to_mention
@groups_to_mention ||= mentionable_groups.where("user_count <= ?", SiteSetting.max_users_notified_per_group_mention)
end
```
This one is kind of a premature optimization, because we don't have evidence that
this extra query is a problem, but it seems cleaner this way.
Commits history on this PR may help better understand the change.
Add new chat indicator preference within chat user preferences.
Enabling this option will mean that green notifications will only appear for mentions (within channels and DMs.
This change also enables mentions within direct messages.
Using SiteSetting.queue_jobs= to configure job asynchronicity was deprecated here four years ago and marked for removal in version 2.9.0. This PR removes the fallback method we kept since then. The method was there because it was still being used in a bunch of plugin tests (now fixed.)
- correctly respects min-width/height defined in css
- removes fixed width/height when resizing window
- reduces the min width of the side panel from 250px to 150px
