Sometimes changes to "What's new?" feed items are made or the feed items are
removed altogether, and the polling interval to check for new features is 1 day.
This is quite long, so this commit introduces a "Check for updates"
button for admins to click on the "What's new?" page which will bust
the cache for the feed and check again at the new features endpoint.
This is limited to 5 times per minute to avoid rapid sending of
requests.
Previously, the secure-upload redirection logic would fail for extension-less files. This commit updates it to work, and adds a spec for the behavior.
Extension-less file uploads are not allowed by default, so this is a very niche situation.
This commit introduces a new feature that allows staff to bulk select and delete users directly from the users list at `/admin/users/list`. The main use-case for this feature is make deleting spammers easier when a site is under a large spam attack.
Internal topic: t/140321.
This moves the logic of setting the correct permalink values back into the controller. And it replaces the validation with a simpler one, that always works, even when the model is loaded from the DB.
Follow-up to #29634 which broke import scripts and lots of documentation on Meta.
* FEATURE: Add skip notification option to group invite to topic
* DEV: rename `skip_notification` to `should_notify`
* DEV: update `should_notify` param to be default `true` in controllers
* DEV: update spec to use `greater than` instead of `equal to` to prevent flakiness
* Update app/controllers/topics_controller.rb
Co-authored-by: David Taylor <david@taylorhq.com>
* DEV: merged two `#invite_group` specs into one
* DEV: Added test case for `invite-group` in requests spec
---------
Co-authored-by: David Taylor <david@taylorhq.com>
Redesign the permalinks page to follow the UX guide. In addition, the ability to edit permalinks was added.
This change includes:
- move to RestModel
- added Validations
- update endpoint and clear old values after the update
- system specs and improvements for unit tests
Follow up to 6f8f6a7726
Prior to the linked commit, the `uploads#create` endpoint had a `upload_type` and `type` param that acted as aliases for each other and raised an error if both of them were missing. In the linked commit, we removed the `type` param and always required the `upload_type` param which break API consumers that only included `type` in their requests.
This commit adds back the `type` param temporarily and introduces a deprecation message for it so that API consumers are made aware of the eventual removal of the `type` param.
Prior to Uppy, the `uploads#create` endpoint used to receive a `type` param that indicated the purpose/target of the upload, such as `avatar`, `site_setting` and so on. With the introduction of Uppy, the `type` param became the MIME type of the file being uploaded, and the purpose/target of the upload became a new param called `upload_type`, however the backend could still use the `type` param (which now contains MIME type) as the purpose/target of the upload if `upload_type` is absent.
We technically don't need to send the MIME type over the network, but it seems like it's done by Uppy and we have no control over the `type` param that Uppy includes:
758de8167b/app/assets/javascripts/discourse/app/lib/uppy/uppy-upload.js (L146-L151)
This commit does a couple of things:
1. It amends the `uploads#create` endpoint so it always requires the `upload_type` param and doesn't fallback to `type` if `upload_type` is absent
2. It forces consumers of the `UppyUpload` class (and by extension `UppyImageUploader`) to specify `type` of the upload
Internal topic: t/140945.
This commit adds a new "Community title" field to the about config page. This field controls the `short_site_description` setting, which is shown in the browser tab for key pages such categories pages and topic lists.
Internal topic: t/140812.
* DEV:refactor user badges create to get grant opts from method
* Replace method overwrite with plugin modifier
* Add aditional params
* change modifier name
This commit adds a new "Invite" link to the sidebar for all users who can invite to the site. Clicking the link opens the invite modal without changing the current route the user is on. Admins can customize the new link or remove it entirely if they wish by editing the sidebar section.
Internal topic: t/129752.
This patch replaces the parameters provided to a service through
`params` by the contract object.
That way, it allows better consistency when accessing input params. For
example, if you have a service without a contract, to access a
parameter, you need to use `params[:my_parameter]`. But with a contract,
you do this through `contract.my_parameter`. Now, with this patch,
you’ll be able to access it through `params.my_parameter` or
`params[:my_parameter]`.
Some methods have been added to the contract object to better mimic a
Hash. That way, when accessing/using `params`, you don’t have to think
too much about it:
- `params.my_key` is also accessible through `params[:my_key]`.
- `params.my_key = value` can also be done through `params[:my_key] =
value`.
- `#slice` and `#merge` are available.
- `#to_hash` has been implemented, so the contract object will be
automatically cast as a hash by Ruby depending on the context. For
example, with an AR model, you can do this: `user.update(**params)`.
Currently in services, we don’t make a distinction between input
parameters, options and dependencies.
This can lead to user input modifying the service behavior, whereas it
was not the developer intention.
This patch addresses the issue by changing how data is provided to
services:
- `params` is now used to hold all data coming from outside (typically
user input from a controller) and a contract will take its values from
`params`.
- `options` is a new key to provide options to a service. This typically
allows changing a service behavior at runtime. It is, of course,
totally optional.
- `dependencies` is actually anything else provided to the service (like
`guardian`) and available directly from the context object.
The `service_params` helper in controllers has been updated to reflect
those changes, so most of the existing services didn’t need specific
changes.
The options block has the same DSL as contracts, as it’s also based on
`ActiveModel`. There aren’t any validations, though. Here’s an example:
```ruby
options do
attribute :allow_changing_hidden, :boolean, default: false
end
```
And here’s an example of how to call a service with the new keys:
```ruby
MyService.call(params: { key1: value1, … }, options: { my_option: true }, guardian:, …)
```
Currently, when calling a service with its block form, a `#result`
method is automatically created on the caller object. Even if it never
clashed so far, this could happen.
This patch removes that method, and instead use a more classical way of
doing things: the result object is now provided as an argument to the
main block. This means if we need to access the result object in an
outcome block, it will be done like this from now on:
```ruby
MyService.call(params) do |result|
on_success do
# do something with the result object
do_something(result)
end
end
```
In the same vein, this patch introduces the ability to match keys from
the result object in the outcome blocks, like we already do with step
definitions in a service. For example:
```ruby
on_success do |model:, contract:|
do_something(model, contract)
end
```
Instead of
```ruby
on_success do
do_something(result.model, result.contract)
end
```
This commit brings back some reports hidden or changed
by the commit in 14b436923c if
the site setting `use_legacy_pageviews` is false.
* Unhide the old “Consolidated Pageviews” report and rename it
to “Legacy Consolidated Pageviews”
* Add a legacy_page_view_total_reqs report called “Legacy Pageviews”,
which calculates pageviews in the same way the old page_view_total_reqs
report did.
This will allow admins to better compare old and new pageview
stats which are based on browser detection if they have switched
over to _not_ use legacy pageviews.
Toggle the button to enable the experimental site setting from "What's new" announcement.
The toggle button is displayed when:
- site setting exists and is boolean;
- potentially required plugin is enabled.
When a user is missing required fields, they are required to fill those up before continuing to interact with the forum. This applies to admins as well.
We keep a whitelist of paths that can still be visited in this mode: FAQ, About, 2FA setup, and any admin route for admins.
We concluded that admins should still be able to enable safe mode even with missing required fields. Since plugins etc. can potentially mess with the ability to fill those up.
When staff only mode is enabled - Discourse.enable_readonly_mode(Discourse::STAFF_WRITES_ONLY_MODE_KEY)
Staff members couldn't reset their password via the "forgot password" link.
This fixes it.
Internal ref. t/133990
We're expecting the ID param to be something that neatly coerces into an ID. If we receive something like a nested parameter, this will blow up. (We already handle the case of arrays.)
This commit raises an InvalidParameters exception in the case of a nested ID.
We're expecting the page param to be something that neatly coerces into an integer. If we receive something like a nested parameter, this will blow up. (I'm sure there are other examples as well.)
This commit falls back to a page value of 1 if the coercion fails.
Constants should always be only assigned once. The logical OR assignment
of a constant is a relic of the past before we used zeitwerk for
autoloading and had bugs where a file could be loaded twice resulting in
constant redefinition warnings.
* UX: More additions
* UX: more
* DEV: Add admin/config/themes route
* UX: Use admin config card
* syntax merge fixes
* cleanup
* cleanup
* checkbox
* more
* error
* save on click
* more
* fix setter
* DEV: Implement vanilla checkbox
* cleanup
* UX: save themes as default
* DEV: Add component list to card
* DEV: Add placeholder for no screenshots
* DEV: Fix default theme reactivity
Also add content/optionalAction yields to config area
card and put the theme user selectable checkbox there,
along with adding styles.
* DEV: Change to generic "look and feel" config area
* DEV: Auto redirect to themes on base look and feel route
* UX: Remove computed from sorted themes
* linting
* UX: Turn update icon into button that routes to settings
* DEV: remove unused function
* UX: center icons with title
* DEV: Lint
* UX: Hook up theme preview button
* DEV: Minor fixes
---------
Co-authored-by: Martin Brennan <martin@discourse.org>
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
If a plugin's JS fails to load for some reason, most commonly
ad blockers, the entire admin interface would break. This is because
we are adding links to the admin routes for plugins that define
them in the sidebar.
We have a fix for this already in the plugin list which shows a warning
to the admin. This fix just prevents the broken link from rendering
in the sidebar if the route is not valid.
When a post has some replies, and the user click on the button to show them, we would load ALL the replies. This could lead to DoS if there were a very large number of replies.
This adds support for pagination to these post replies.
Internal ref t/129773
FIX: Duplicated parent posts
DEV: Query refactor
We are going to start making section landing pages
for admin for each sidebar section. This lays the framework
with routes and simple components that can be further
refined by a designer, but I have taken the base CSS from
AI which Kris made.
The initial section landing items will be used in AI to replace
the placeholders added in this commit b8b3c61451
This commit introduces a feature that allows an admin to delete a user's
associated account. After deletion, a log will be recorded in staff
actions.
ref=t/136675
his is a new feature that lets admins dismiss notices from the dashboard. This helps with self-service in cases where a notice is "stuck", while we work on provisions to prevent "sticking" in the first place.
In TopicController, in addition to ensure_can_move_posts!, we also
checked if the topic is private message in this line:
```ruby
raise Discourse::InvalidAccess if params[:archetype] == "private_message" && !guardian.is_staff?
```
However, this was not present in `guardian.can_move_posts?`. As a result,
the frontend topic view got an incorrect serialized result, thinking
that TL4 could move the private message post. In fact, once they tried
to move it, they got the `InvalidAccess` error message.
This commit fixes that TL4 will no longer sees the "move to" option in
the "select post" panel for a private message.
- fetch models inside services
- validate `user_id` in contracts
- use policy objects
- extract more logic to actions
- write specs for services and action
### UI changes
All of the UI changes described are gated behind the `use_legacy_pageviews`
site setting.
This commit changes the admin dashboard pageviews report to
use the "Consolidated Pageviews with Browser Detection" report
introduced in 2f2da72747 with
the following changes:
* The report name is changed to "Site traffic"
* The pageview count on the dashboard is counting only using the new method
* The old "Consolidated Pageviews" report is renamed as "Consolidated Legacy Pageviews"
* By default "known crawlers" and "other" sources of pageviews are hidden on the report
When `use_legacy_pageviews` is `true`, we do not show or allow running
the "Site traffic" report for admins. When `use_legacy_pageviews` is `false`,
we do not show or allow running the following legacy reports:
* consolidated_page_views
* consolidated_page_views_browser_detection
* page_view_anon_reqs
* page_view_logged_in_reqs
### Historical data changes
Also part of this change is that, since we introduced our new "Consolidated
Pageviews with Browser Detection" report, some admins are confused at either:
* The lack of data before a certain date , which didn’t exist before
we started collecting it
* Comparing this and the current "Consolidated Pageviews" report data,
which rolls up "Other Pageviews" into "Anonymous Browser" and so it
appears inaccurate
All pageview data in the new report before the date where the _first_
anon or logged in browser pageview was recorded is now hidden.
* FEATURE: Log tag group changes in staff action log
This commit records every change (add, change, delete) to a tag group in
the staff action log.
It uses a modal that was originally called ThemeChangeModal to display
changes, allowing staffs to see the specific changes clearly. The modal
is renamed to StaffActionLogChangeModal in this PR.
ref: https://meta.discourse.org/t/-/325011/14
Co-authored-by: Keegan George <kgeorge13@gmail.com>
This patch removes the `with_service` helper from the code base.
Instead, we can pass a block with actions directly to the `.call` method
of a service.
This simplifies how to use services:
- use `.call` without a block to run the service and get its result
object.
- use `.call` with a block of actions to run the service and execute
arbitrary code depending on the service outcome.
It also means a service is now “self-contained” and can be used anywhere
without having to include a helper or whatever.
Currently, categories support designating only 1 group as a moderation group on the category. This commit removes the one group limitation and makes it possible to designate multiple groups as mods on a category.
Internal topic: t/124648.
