In the past we were only intercepting 429 and 404; it's probably better to surface any error.
There are already tests for the 404 and 429, I consider them enough for now.
This commit ensures we have correct icon and title on mobile for the chat header icon.
It also fixes a bug where the site setting was not correctly used when the user has not yet set the user option.
Both cases are now correctly tested.
This commit was incorrectly removed of https://github.com/discourse/discourse/pull/23078 and would set the state only on entering (or exiting) chat route. The tests were already present in the previous PR.
Not sure when we added this but it is no longer necessary,
hashtags are cooked appropriately when sending chat messages
and the mention transform was not used anywhere.
We were attempting to fetch from last read but this is actually complicated to get right when you have a lot unread, as we might still have more to load after this but the last unread id is still the same and would make the user end up in a loop.
Prior to this commit we were loading a large number of thread messages without any pagination. This commit attempts to fix this and also improves the following points:
- code sharing between channels and threads:
Attempts to reuse/share the code use in channels for threads. To make it possible part of this code has been extracted in dedicated helpers or has been improved to reduce the duplication needed.
Examples of extracted helpers:
- `stackingContextFix`: the ios hack for rendering bug when momentum scrolling is interrupted
- `scrollListToMessage`, `scrollListToTop`, `scrollListToBottom`: a series of helper to correctly scroll to a specific position in the list of messages
- better general performance of listing messages:
One of the main changes which has been made is to remove the computation of visible message during scroll, it will only happen when needed (update last read for example). This constant recomputation of `message.visible` on intersection observer event while scrolling was consuming a lot of CPU time.
Sharing a link in chat will create a onebox embed with a source that includes a site icon and title.
This change prevents loading the site icon into lightbox.
Followup to 07c3782e51
The above incorrectly removed the channel unread count in
the mobile/drawer channel list when the user has mentions
(meaning the unreads are urgent). This commit adds it
back and refactors system specs a little.
Define new concept of panels in sidebar. Panels are wrappers around sidebar sections. In the future, it allows creating full focus mode by switching between panels.
A new API method called addSidebarPanel was added. Default main panel is already registered and by default all API sections are mounted to main.
This commit fixes two issues with the thread list:
1. All threads were being shown regardless of whether the user had
a membership in the thread. This was happening because the list
and the channel share the same thread store, so if the channel
had OMs with threads we would load them and they showed in the list.
2. Threads created by the user from a staged thread would double up.
This is because the _cache in the channel threadsManager would use
the staged thread ID even after we'd replaced the object's ID with
the actual thread from the DB. The answer to this is to remove and
re-add the thread to the local cache with the actual ID.
* DEV: Fix and re-enable chat flakys
The early return in JS was added to prevent an error
from channel being null, and it's better to use known
users for the message fabrications in the specs.
* DEV: Use travel_to in drawer spec for thread tracking
Sometimes in the system test the datetime that is last
viewed for the channel for the user and the datetime for
the last message created_at is only microseconds of difference,
and we do not provide that level of fidelity in the MessageBus
serializer, so unreadThreadsCountSinceLastViewed is not
accurate.
Better to just utilize travel_to and move forward 1 minute in
time before sending the new message to easily differentiate.
When we have subscriptions for new messages in a channel,
we also have special handling for messages in a thread. For
cases like DM channels where threads are made in the background
but not used in the UI, this is causing JS errors because we
are trying to fetch the thread but it returns 404.
We only want to do things with messages in threads if the
channel actually has threading enabled.
On tablets like iPad where we allow channel and thread to be on the same screen, it was not possible to resize the panels due to code being thought for mouse events. This commit should now correctly allow for this.
The "resizer" has also been made larger to simplify touching.
No test as it's hard to test on iPad and dragging events are also complex.
On iOS we have a hack to prevent the viewport to move when focusing an input, however this code was targeting the textarea node through a global selector which is working fine on iOS as we only show one composer at a time but was failing on iPad as we show both channel and thread on the same screen. As a result `document.querySelector(".chat-composer__input")` was always targeting the first textarea on the screen which was the channel's composer, making it impossible to focus the thread's one.
This commit makes it so that when the user has unread threads
for a channel we show a blue dot in the sidebar (or channel index
for mobile/drawer).
This blue dot is slightly different from the channel unread messages:
1. It will only show if the new thread messages were created since
the user last viewed the channel
2. It will be cleared when the user views the channel, but the threads
are still considered unread because we want the user to click into
the thread list to view them
This necessitates a change to the current user serializer to also
include the unread thread overview, which is all unread threads
across all channels and their last reply date + time.
Prior to this change you might end up in a loop where removing a channel would redirect you to this channel and as we auto-follow opened direct message channels, you could never unfollow this last direct message channel.
Prior to this commit a long press on the image of a chat message would trigger both the actions menu and the contextual menu. This commit ensures we only show the contextual menu in this case.
No test as it's a quite complex behavior to reproduce (would need android for example).
This was causing this event to cause other touch events down the road. For example click a reaction above the composer when the message action was opened could cause the composer to gain focus after the reaction was made.
It could only occur on message created by the user itself and deleted while the user was looking at the channel.
It more generally fix the trash service which was not correctly setting the author of the delete.
`SiteSetting.enable_public_channels` allows site admin to decide if public channels are available at all. There's no distinction between admins or not as we expect admins to create private category channels if they want to limit usage.
Initial migration and changes to models as well as
changing the following services to update last_message_id:
* Chat::MessageCreator
* Chat::RestoreMessage
* Chat::TrashMessage
The data migration will set the `last_message_id` for all existing
threads and channels in the database.
When we query the thread list as well as the channel,
we look at the last message ID for the following:
* Channel - Sorting DM channels, and channel metadata for the list of channels
* Thread - Last reply details for thread indicators and thread list
It is now safe to render the message excerpt as HTML since
it is no longer using text_entities: true in the server
PrettyText.excerpt call when creating the message excerpt
from the cooked HTML.
This will fix the issue of things like mentions showing
HTML code instead of the actual mention when replying,
and cannot be used to inject improper HTML like style tags
via XSS.
* FEATURE: Inline topic summary. Cached version accessible to everyone.
Anons and non-members of the `custom_summarization_allowed_groups_map` groups can see cached summaries for any accessible topic. After the first 12 hours and if the posts to summarize have changed, allowed users clicking on the button will automatically re-generate it.
* Ensure chat summaries work and prevent model hallucinations when there are no messages.
Browser capabilities are inherently unconnected to the lifecycle of our app. Making them formally available outside of the service means that they can safely be used in non-app-linked functions without needing risky hacks like `helperContext()` or `discourse-common/lib/get-owner`.
One example of where the old hacks were problematic is the `translateModKey()` utility function. This is called in the root of the `discourse/components/modal/keyboard-shortcuts-help` es6 module. If anything (e.g. a theme/plugin) caused that es6 module to be `require()`d before the application was booted, a fatal error would occur.
Following this commit, `translateModKey()` can safely import and access `capabilities` without needing to worry about the app lifecycle.
The only potential downside to this approach is that the capabilities data now persists across tests. If any tests need to 'stub' capabilities, they will need to revert their changes at the end of the test (e.g. by using Sinon to stub a property).
This commit also updates some legacy references from `capabilities:main` to `service:capabilities`.
This implementation will need more work in the future. For simplification of tracking and other events (new thread, delete/restore OM...) we used the threads from `threadsManager` which makes pagination more complicated as we already have some results when we start.
Note this commit also simplify `Collection` to only have one `load` method which can be called repeatedly.
Trying to fix two issues:
1. Sometimes the publish_new! event for update_thread_original_message
finishes running on the UI before the one for thread_created, in this
case we just want to do nothing because thread_created will fetch the
new thread along with its preview from the server if needed
2. Sometimes the thread GET and /read events were erroring because
last_reply on the thread was nil, this was potentially occuring because
the thread_created event was coming through to the UI before the rest
of MessageCreator was done, so we just move that after the big update
to set thread_id for the new and existing messages in the reply
chain
This commit also standardize the naming pattern of modals: `<Chat::Modal::FooBar />` and changes css class accordingly.
Co-authored-by: David Taylor <david@taylorhq.com>
It's way more common to have presence enabled than disabled, so we should have been making it the default from start.
This commit also changes the namespace of `<ChatUserAvatar />` into `<Chat::UserAvatar />` and refactors tests.
Sadly this function is one of the very hard to test codepaths of the app. We could in the future attempt to extract the content of the function to unit-test it.
When a user sends their first message in a thread we
automatically track the thread in the backend, but we
don't reflect this in the UI until the user re-opens
the thread. This commit fixes that by showing the new
tracking level in the UI.
Chat drawer was using the `DiscourseURL` hook `afterRouteComplete`. This hook suffer from a very poor implementation which makes it very unreliable:
```javascript
if (typeof opts.afterRouteComplete === "function") {
schedule("afterRender", opts.afterRouteComplete);
}
```
This commit attempts to return the promise from `handleURL` to directly use it and have a very reliable after transition hook.
In previous changes we prevented creating a channel to also make users follow the channel. We were forcing recipients to follow the channel on message sent but this was not including the creator of the message itself.
This commit fixes it and also write an end-to-end system spec to cover these cases. The message creator service is currently being rewritten and should correctly test and ensure this logic is present.
This commit also makes changes on the frontend to instantly follow a DM when you open it, this change prevents a green dot to appear for a split second when you send a message in a channel you were previously not following. Only recipients will see the green dot.
Followup to 802fb3b194
We should not hide the replies count if there is only 1 participant
for a thread, because this makes it look like the last reply is the
only reply.
This introduces a PLATFORM_KEY_MODIFIER const that
can be used both client and server side, to determine
whether we should be using the Meta or Ctrl key based
on whether the user is on Windows/Linux or Mac.
Why this change?
Before this commit, there is a chance that we will transition the user
to a different route if the chat thread component has been destroyed
prior to the request for fetching messasges in a chat thread returning.
This commit makes it such that we simply ignore the request if the chat
thread component has been destroyed.
We believe this is the cause of the flaky system tests in plugins/chat/spec/system/navigation_spec.rb
which we've been seeing on CI.
This commit includes several fixes and improvements to thread
original message handling:
1. When a thread's original message is deleted, the thread no longer
counts as unread for a user
2. When a thread original message is deleted and the user is looking
at the thread list, it will be removed from the list
3. When a thread original message is restored and the user is looking
at the thread list, it will be added back to the list if it was
previously loaded
- Presence needs to be explicitly set on the component now
- We were not checking and testing correctly the presence of the unread indicator in the menu
This commit replaces two existing screens:
- draft
- channel selection modal
Main features compared to existing solutions
- features are now combined, meaning you can for example create multi users DM
- it will show users with chat disabled
- it shows unread state
- hopefully a better look/feel
- lots of small details and fixes...
Other noticeable fixes
- starting a DM with a user, even from the user card and clicking <kbd>Chat</kbd> will not show a green dot for the target user (or even the channel) until a message is actually sent
- it should almost never do a full page reload anymore
---------
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Jordan Vidrine <30537603+jordanvidrine@users.noreply.github.com>
Co-authored-by: chapoi <101828855+chapoi@users.noreply.github.com>
Co-authored-by: Mark VanLandingham <markvanlan@gmail.com>
* UX: make timestamp font size smaller
* UX: participants use copy instead of avatar
* FIX: Move thread participant count into i18n
---------
Co-authored-by: Martin Brennan <martin@discourse.org>
* DEV: Fix flaky thread nav spec
When we transitioned from the chat thread panel under some conditions
the request for the thread would come back and realise the component
was destroyed, which was trying to do a transition to the channel
itself.
Now we check for the previous route here too and transition to the
correct route.
* DEV: Fix chat transcript spec relying on animation
The on-animation-end modifier is not reliable in system specs
because it fires instantly (we have disabled capybara animations)
so the showCopySuccess boolean can be mutated back to false straight
away.
Better to have a separate boolean tracked with a data-attr that we
can reliably inspect in the system spec.
- Inline mentions on posts
- Inline mentions on chat messages
- The user autocomplete for the composer
- The user autocomplete for chat
- The chat section of the sidebar
This will be used when we move the channel creation for DMs
to happen when we first send a message in a DM channel to avoid
a double-request. For now we can just have a new API endpoint
for creating this that the existing frontend code can use,
that uses the new service pattern.
This also uses the new policy pattern for services where the policy
can be defined in a class so a more dynamic reason for the policy
failing can be sent to the controller.
Co-authored-by: Loïc Guitaut <loic@discourse.org>
Enabling/Disabling threading has been possible through command line until now. This commit introduces two new UIs:
- When creating a channel, it will be available once the category has been selected
- On the settings page of a channel for admins
Addressing TODO about using chatApi in the ChatChannel model,
but since it's a model we cannot easily use the chatApi service.
The model function is only called in one place so we may as well
just move the call there since the component can use chatApi
* FEATURE: Sort thread list by unread threads first
This commit changes the thread list to show the threads that
have unread messages at the top of the list sorted by the
last reply date + time, then all other threads sorted by
last reply date + time.
This also fixes some issues by removing the last_reply
relationship on the thread, which did not work for complex
querying scenarios because its order would be discarded.
* FIX: Various fixes for thread list loading
* Use the channel.threadsManager and find the channel first rather
than use activeChannel in the threads manager, otherwise we may
be looking at differenct channels.
* Look at threadsManager directly instead of storing result for threads
list otherwise it can get out of sync because of replace: true in
other places we are loading threads into the store.
* Fix sorting for thread.last_reply, needed a resort.
When clicking back from a thread, we want to either go back to the
channel if the thread was opened from an indicator, or to the thread
list if we opened it from there. Since ember doesn't give a nice way
to get the previous route, we need to store this ourselves. We only
do this on mobile, on desktop we just follow existing behaviour.
Also implements a chat router history.
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
- gridified the thread message indicator, alleviating some problems with positioning and overflow
participant avatars will overlap/smush on smaller size and mobile
- the excerpt went from 3 > 2 lines of wrapping on smaller size, still 1 line on large size
- dropped the copy of "last reply"
- fixed wrong line height
- moved the "x replies" over to the right near the participants, as that makes more sense
- using a bubble to indicate other participants, instead of copy
This PR introduces the @container query, which is experimental. Nothing will break when it's being viewed in a not-supported browser, but it will be less elegant.
To export chat messages, go to `/admin/plugins/chat` and click the Create export
button in the _Export chat messages_ section. You'll receive a direct message
when the export is finished.
Currently, this exports all messages from the last 6 months, but not more than
10000 messages.
This exports all chat messages, including messages from private channels and
users' direct conversations. This also exports messages that were deleted.
This should prevent the message to show as active on mobile when making a touch to start scrolling.
This commit also makes naming of touch lifecycle functions coherent.
This PR adds a new parameter to fetch chat messages: `target_date`.
It can be used to fetch messages by a specific date string. Note that it does not need to be the `created_at` date of an existing message, it can be any date. Similar to `target_message_id`, it retrieves an array of past and future messages following the query limits.
This commit adds an aria-label attribute to cooked hashtags using
the post/chat message decorateCooked functionality. I have just used
the inner content of the hashtag (the tag/category/channel name) for
the label -- we can reexamine at some point if we want something
different like "Link to dev category" or something, but from what I
can tell things like Twitter don't even have aria-labels for hashtags
so the text would be read out directly.
This commit also refactors any ruby specs checking the HTML of hashtags
to use rspec-html-matchers which is far clearer than having to maintain
the HTML structure in a HEREDOC for comparison, and gives better spec
failures.
c.f. https://meta.discourse.org/t/hashtags-are-getting-a-makeover/248866/23?u=martin
- Moves `<ChatMessageInfo />` to `<Chat::Message::Info />`
- Moves `<ChatMessageAvatar />` to `<Chat::Message::Avatar />`
- Moves `<ChatMessageLeftGutter />` to `<Chat::Message::LeftGutter />`, adds tests
- Creates `<Chat::Message::Error />`
- Creates `<Chat::Message::MentionWarning />`, adds tests and a styleguide
- Creates a model for ChatMessageMentionWarning, adds fabricator for it
- Keeps the enter/leave viewport logic inside the `<ChatMessage />` component instead of bubbling it to the channel and thread components
- Adds a scale animation when clicking a reaction
- Creates `chat/later-fn` modifier which accepts a function and a delay. It allows to call a function Xms after a component has been inserted, it's useful for animations.
- Moves css code out of chat-message into relevant files
- Deletes unused code
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
The layout was broken for messages replying to another message in non threaded channels.
This commit also refactors the chat-message-test to use fabricators.
- FIX: improves reactions and thread indicator touch event on mobile
These "buttons" are located inside a scroll list which makes them very specific. The general idea is to ensure these events are passive and are not bubbling to the parent.
- DEV: moves state on top level message node
- FIX: ensures popover arrow has the correct border
- FIX: makes a message expanded by default
- FIX applies the same ios scroll fix on thread and channel
- UI: better active/hover state for thread indicator
- UI: attempts to follow more closely our BEM naming scheme
- FIX: reduces bottom padding on message with thread indicator and user info hidden
- UI: add padding for first message in thread
- FIX: prevents actions backdrop to open thread
- UI: makes thread indicator resizable
This commit adds a tracking dropdown to each individual thread, similar to topics,
that allows the user to change the notification level for a thread manually. Previously
the user had to reply to a thread to track it and see unread indicators.
Since the user can now manually track threads, the thread index has also been changed
to only show threads that the user is a member of, rather than threads that they had sent
messages in.
Unread indicators also respect the notification level -- Normal level thread tracking
will not show unread indicators in the UI when new messages are sent in the thread.
The events leading to this mistake are unclear but we decided few months ago to make direct messages NOT flaggable and even wrote a spec for this, when we actually support flagging of direct messages.
This commit ensures it will show for direct messages channels and inverses the existing spec.
https://meta.discourse.org/t/updating-our-initializer-naming-patterns/241919
For historical reasons, Discourse has different initializers conventions than standard Ember:
```
| Ember | Discourse | |
| initializers | pre-initializers | runs once per app load |
| instance-initializers | (api-)initializers | runs once per app boot |
```
In addition, the arguments to the initialize function is different – Ember initializers get either the `Application` or `ApplicationInstance` as the only argument, but the "Discourse style" gets an extra container argument preceding that.
This is confusing, but it also causes problems with Ember addons, which expects the standard naming and argument conventions:
1. Typically, V1 addons will define their (app, instance) initializers in the `addon/(instance-)initializers/*`, which appears as `ember-some-addon-package-name/(instance-)initializers/*` in the require registry.
2. Just having those modules defined isn't supposed to do anything, so typically they also re-export them in `app/(instance-)initializers/*`, which gets merged into `discourse/(instance-)initializers/*` in the require registry.
3. The `ember-cli-load-initializers` package supplies a function called `loadInitializers`, which typically gets called in `app.js` to load the initializers according to the conventions above. Since we don't follow the same conventions, we can't use this function and instead have custom code in `app.js`, loosely based on official version but attempts to account for the different conventions.
The custom code that loads initializers is written with Discourse core and plug-ins/themes in mind, but does not take into account the fact that addons can also bring initializers, which causes the following problems:
* It does not check for the `discourse/` module prefix, so initializers in the `addon/` folders (point 1 above) get picked up as well. This means the initializer code is probably registered twice (once from the `addon/` folder, once from the `app/` re-export). This either causes a dev mode assertion (if they have the same name) or causes the code to run twice (if they have different names somehow).
* In modern Ember blueprints, it is customary to omit the `"name"` of the initializer since `ember-cli-load-initializers` can infer it from the module name. Our custom code does not do this and causes a dev mode assertion instead.
* It runs what then addon intends to be application initializers as instance initializers due to the naming difference. There is at least one known case of this where the `ember-export-application-global` application initialize is currently incorrectly registered as an instance initializer. (It happens to not use the `/addon` folder convention and explicitly names the initializer, so it does not trigger the previous error scenarios.)
* It runs the initializers with the wrong arguments. If all the addon initializer does is lookup stuff from the container, it happens to work, otherwise... ???
* It does not check for the `/instance-initializers/` module path so any instance initializers introduced by addons are silently ignored.
These issues were discovered when trying to install an addon that brings an application initializer in #22023.
To resolve these issues, this commit:
* Migrates Discourse core to use the standard Ember conventions – both in the naming and the arguments of the initialize function
* Updates the custom code for loading initializers:
* For Discourse core, it essentially does the same thing as `ember-cli-load-initializers`
* For plugins and themes, it preserves the existing Discourse conventions and semantics (to be revisited at a later time)
This ensures that going forward, Ember addons will function correctly.
