That could cause flakeyness in specs depending in which timing message bus would arrive and it's not necessary as it should be updated with `handleThreadOriginalMessageUpdate`.
Follow up to #26712 to account for older threads that don't have a persisted excerpt, as this was previously generated on every page load.
This change allows us to build the excerpt on the fly when none exists, fixing the issue of missing message excerpts for thread previews (within channel) and thread lists (on mobile/desktop).
This change moves the chat message excerpt into a new database column (string) on the chat_messages table.
As part of this change, we will now set the excerpt within the `Chat::CreateMessage` service, and update it within the `Chat::UpdateMessage` service.
This commit will now allow us to track read position in a thread and returns to this position when you open the thread.
Note this commit is also extracting the following components to make it possible:
- `<ChatMessagesScroller />`
- `<ChatMessagesContainer />`
The `UpdateUserThreadLastRead` has been updated to allow this.
Various refactorings have also been done to the code and specs to improve the support of last read.
When selecting messages to move to a new channel, if any of the selected messages is the original message of a thread, the entire thread, including all its replies, will be moved to the destination channel
The fix is to actually wait for the bottom arrow to show before appending a new message, otherwise sometimes it goes too fast, and we create a new message while the scroll has not ended yet, making the arrow not visible yet.
This commit also uses this opportunity to move from `50.times.map {}` to `Fabricate.times(50, ...)` in this spec file.
Why this change?
`expect(page.title).to starts_with("...")` does not rely on capybara
waiters. This commit switches us to use `have_title` instead which will
rely on Capybara waiters.
The expected behavior when receiving a message is the following:
- if user is at the bottom of the screen, scroll and append message
- if user is not at the bottom of the screen, don't scroll, show arrow and don't append message
This commit fixes an issue where the following happens:
1. You open /admin as a member of the admin_sidebar_enabled_groups
1. You then click the chat icon in the header when you prefer to have
drawer open, or if you just minimise chat into drawer after it opens
fullscreen
1. You lose the admin sidebar panel, and are reset instead to the main
panel
Also included is a bit of refactoring to make it so the forcing of
admin sidebar state is in one place.
Prior to this change we would pre-load all the user channels which making initial page load slower. This change will make them be loaded right after initial load. In the past this was not possible as the channels would have to be loaded on each page transition. However since about a year, we made the channels to be cached on the frontend and no other request will be needed.
I have decided for now to not show a loading state in the sidebar as I think it would be noise, but we can reconsider this later.
Note given we don't have the channels loaded at first certain things where harder to accomplish. The biggest UX change of this commit is that we removed all the complex logic of computing the best channel to display when you load /chat. We will now store the id of the last channel you visited and will use this id to decide which channel to show.
On mobile, when viewing the My Threads area, each thread will show:
- The avatar of the last responder in the thread, overlaid with the chat thread symbol to visually distinguish this area from DMs.
- Either the thread title, where applicable, or the first message of the thread, truncated to fit on one line.
- The channel where the thread originated.
- The last message sent in the thread, truncated to fit on one line.
- When the last message was sent in the thread.
---------
Co-authored-by: David Battersby <info@davidbattersby.com>
Forcing a thread will work even in channel which don't have `threading_enabled` or in direct message channels.
For now this feature is only available through the `ChatSDK`:
```ruby
ChatSDK::Message.create(in_reply_to_id: 1, guardian: guardian, raw: "foo bar baz", channel_id: 2, force_thread: true)
```
Prior to this fix if a user had started to reply to a message without actually sending a message, the thread would still be created and we would end up listing it in the threads list of a channel.
This commit also improves adds thread and thread_replies_count to the 4th parameter of the chat_message_created event.
* UX: chat message creator scss cleanup + design tweak to username display
* add user status with live updates to modal
* show user status description in modal
* add tests for user status
* UX: add user-status styling to chat message creator
---------
Co-authored-by: David Battersby <info@davidbattersby.com>
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Prior to this fix we were checking if user was not part of a group which allows to chat, but we were not checking if this user was part of groups who can use direct messages.
Prior to this fix clicking <kbd>x</kdb> on a channel row would effectively leave the channel on server side, but it wouldn't disappear from the screen before a page refresh.
`chat_preferred_mobile_index` allows to set the preferred default tab when loading chat on mobile.
Current choices are:
- channels
- direct_messages
- my_threads
Prior to this fix, if the last message of a thread had been made by a deleted user it would cause an exception as we would have no user to display, this commit uses a solution we have been using at other places: the null pattern, through the use of `Chat::NullUser.new`.
Prior to this fix the scroll was ignored when clicking the arrow bottom which would prevent the call to update last read. This fix manually calls update last read in this case and adds a test for it.
In safe mode plugins are not loaded, so the plugin admin
routes are not loaded. This was causing errors in the
admin sidebar because we are trying to show links to the plugin
admin routes.
This fixes the issue by just not adding the plugin links if
we are in safe mode.
Why this change?
We noticed that running `LOAD_PLUGINS=1 rspec --seed=38855 plugins/chat/spec/system/chat_new_message_spec.rb` locally
results in the system tests randomly failing. When we inspected the
request logs closely, we noticed that a `/presence/get` request from a
previous rspec example was being processed when a new rspec example is
already being run. We know it was from the previous rspec example
because inspecting the auth token showed the request using the auth
token of a user from the previous example. However, when a request using
an auth token from a previous example is used it ends up logging out the
same user on the server side because the user id in the cookie is the same
due to the use of `fab!`.
I did some research and there is apparently no way to wait until all
inflight requests by the browser has completed through capybara or
selenium. Therefore, we will add an identifier by attaching a cookie to all non-xhr requests so that
xhr requests which are triggered subsequently will contain the cookie in the request.
In the `BlockRequestsMiddleware` middleware, we will then reject any
requests when the value of the identifier in the cookie does not match the current rspec's example
location.
To see the problem locally, change `Auth::DefaultCurrentUserProvider.find_v1_auth_cookie` to the following:
```
def self.find_v1_auth_cookie(env)
return env[DECRYPTED_AUTH_COOKIE] if env.key?(DECRYPTED_AUTH_COOKIE)
env[DECRYPTED_AUTH_COOKIE] = begin
request = ActionDispatch::Request.new(env)
cookie = request.cookies[TOKEN_COOKIE]
# don't even initialize a cookie jar if we don't have a cookie at all
if cookie&.valid_encoding? && cookie.present?
puts "#{env["REQUEST_PATH"]} #{request.cookie_jar.encrypted[TOKEN_COOKIE]&.with_indifferent_access}"
request.cookie_jar.encrypted[TOKEN_COOKIE]&.with_indifferent_access
end
end
end
```
After which run the following command: `LOAD_PLUGINS=1 rspec --format documentation --seed=38855 plugins/chat/spec/system/chat_new_message_spec.rb`
It takes a few tries but the last spec should fail and you should see something like this:
```
assets/chunk.c16f6ba8b6824baa47ac.d41d8cd9.js {"token"=>"37d995a4b65395d3b343ec70fff915b4", "user_id"=>3382, "username"=>"bruce0", "trust_level"=>1, "issued_at"=>1708591735}
/assets/chunk.050148142e1d2dc992dd.d41d8cd9.js {"token"=>"37d995a4b65395d3b343ec70fff915b4", "user_id"=>3382, "username"=>"bruce0", "trust_level"=>1, "issued_at"=>1708591735}
/chat/api/channels/527/messages {"token"=>"37d995a4b65395d3b343ec70fff915b4", "user_id"=>3382, "username"=>"bruce0", "trust_level"=>1, "issued_at"=>1708591735}
/uploads/default/test_0/optimized/1X/_129430568242d1b7f853bb13ebea28b3f6af4e7_2_512x512.png {"token"=>"37d995a4b65395d3b343ec70fff915b4", "user_id"=>3382, "username"=>"bruce0", "trust_level"=>1, "issued_at"=>1708591735}
redirects to existing chat channel
redirects to chat channel if recipients param is missing (PENDING: Temporarily skipped with xit)
with multiple users
/favicon.ico {"token"=>"9a75c114c4d3401509a23d240f0a46d4", "user_id"=>3382, "username"=>"bruce0", "trust_level"=>1, "issued_at"=>1708591736}
/chat/new-message {"token"=>"9a75c114c4d3401509a23d240f0a46d4", "user_id"=>3382, "username"=>"bruce0", "trust_level"=>1, "issued_at"=>1708591736}
/presence/get {"token"=>"37d995a4b65395d3b343ec70fff915b4", "user_id"=>3382, "username"=>"bruce0", "trust_level"=>1, "issued_at"=>1708591735}
```
Note how the `/presence/get` request is using a token from the previous example.
Co-authored-by: David Taylor <david@taylorhq.com>
We have separated and combined modes for sidebar panels.
Separated means the panels show only their own sections,
combined means sections from all panels are shown.
The admin sidebar only shows its own panels, so it must set
the mode to separated; however when we navigate to chat or
home we must revert to the initial mode setttings.
When hiding/showing the sidebar, as is the case on mobile
and using the toggle in the top left on desktop, we delete
and recreate the ember component on the page. This causes
the `sections` for each sidebar panel to get re-evaluated
every time.
For the admin sidebar, this means that we were constantly
re-adding the plugin links to the sidebar, causing duplication.
This can be fixed by just adding @cached to the getter for
sections.
This feature adds the functionality to start a new chat directly from the URL using query params.
The format is: /chat/new-message?recipients=buford,jona
The initial version of this feature allows for the following:
- Open an existing direct message channel with a single user
- Create a new direct message channel with a single user (and auto redirect)
- Create or open a channel with multiple users (and auto redirect)
- Redirects to chat home if the recipients param is missing
Why this change?
The tests are consistently flaky and failing with the following error:
```
CapybaraTimeoutExtension::CapybaraTimedOut:
This spec passed, but capybara waited for the full wait duration (10s) at least once. This will slow down the test suite. Beware of negating the result of selenium's RSpec matchers.
```
The service `Chat::CreateMessage` will now accept `context_post_ids` and `context_topic_id` as params. These values represent the topic which might be visible when sending a message (for now, this is only possible when using the drawer).
The `DiscourseEvent` `chat_message_created` will now have the following signature:
```ruby
on(:chat_message_created) do | message, channel, user, meta|
p meta[:context][:post_ids]
end
```
Channels can include emojis in front of the channel title which causes problems when sorting.
Using the channel slug is a more reliable way to sort and avoid these kind of issues.
This change will sort channels by activity on mobile, with preference to those with urgent or unread messages.
Channels with mentions will appear first, followed by channels with unread messages, then finally everything else sorted by the channel title (alphabetically).
