Plugins can use a new modifier to change which site settings are
hidden using the :hidden_site_settings modifier. For example:
register_modifier(:hidden_site_settings) do |hidden|
(hidden + [:invite_only, :login_required]).uniq
end
Calling add_to_serializer is an irreversible operation which affects all the following tests in the suite. This lead to other tests failing because they weren't expecting the extra field on the category serializer.
Followup to 2a75656ff2
In the past we would build the stack of Omniauth providers at boot, which meant that plugins had to register any authenticators in the root of their plugin.rb (i.e. not in an `after_initialize` block). This could be frustrating because many features are not available that early in boot (e.g. Zeitwerk autoloading).
Now that we build the omniauth strategy stack 'just in time', it is safe for plugins to register their auth methods in an `after_initialize` block. This commit relaxes the old restrictions so that plugin authors have the option to move things around.
Previously, we would build the stack of omniauth authenticators once on boot. That meant that all strategies had to be included, even if they were disabled. We then used the `before_request_phase` to ensure disabled strategies could not be used. This works well, but it means that omniauth is often doing unnecessary work running logic in disabled strategies.
This commit refactors things so that we build the stack of strategies on each request. That means we only need to include the enabled strategies in the stack - disabled strategies are totally ignored. Building the stack on-demand like this does add some overhead to auth requests, but on the majority of sites that will be significantly outweighed by the fact we're now skipping logic for disabled authenticators.
As well as the slight performance improvement, this new approach means that:
- Broken (i.e. exception-raising) strategies cannot cause issues on a site if they're disabled
- `other_phase` of disabled strategies will never appear in the backtrace of other authentication errors
No plugins or themes rely on anonymous_posting_min_trust_level so we
can just switch straight over to anonymous_posting_allowed_groups
This also adds an AUTO_GROUPS const which can be imported in JS
tests which is analogous to the one defined in group.rb. This can be used
to set the current user's groups where JS tests call for checking these groups
against site settings.
Finally a AtLeastOneGroupValidator validator is added for group_list site
settings which ensures that at least one group is always selected, since if
you want to allow all users to use a feature in this way you can just use
the everyone group.
Using Wizard.exclude_steps applies to all sites in a multisite cluster.
In order to exclude steps for individual sites at run-time, a new
instance method `remove_step` is being added.
This fixes a similar issue to 8b3eca0 where an Errno::ETXTBSY error was raised because the minio_runner gem was trying to install the binary across multiple processes in rspec. If we just make sure the latest version is installed before the tests run, this shouldn't happen, since MinioRunner.start will not do any further attempts at installation if the latest version is installed.
Why this change?
When we're in the midst of loading more tags, the filter dropdown
is still enabled and may result in us firing off multiple requests to
the server to load more tags. This makes the loading hard to reason
about in the tests environment and has led to flaky tests.
What does this change do?
This changes disables the filter dropdown when more tags are being
loading.
Why this change?
Currently, we do not have a method to easily retrieve a theme setting's
value on the server side. Such a method can be useful in the test
environment where we need to retrieve the theme's setting and use its
value in assertions.
What does this change do?
This change introduces the `Theme#get_setting` instance method.
This change adds a new event trigger (new_post_moved) when the first post in a topic is moved to a new topic.
Plugins that listen for the new_post_moved event now have an easy way to update old data based on the post id.
There are a few PUT requests that users can do in their preferences tab that aren't going through the standard `user#update` action.
This commit adds all the "trivial" ones (aka. except the security-related one, username and email changes) so you can now change the badge title, the avatar or featured topic of a user via the API.
This commit adds a new admin UI under the route `/admin-revamp`, which is
only accessible if the user is in a group defined by the new `enable_experimental_admin_ui_groups` site setting. It
also adds a special `admin` sidebar panel that is shown instead of the `main`
forum one when the admin is in this area.
We also add an "Admin Revamp" sidebar link to the community section, which
will only appear if the user is in the setting group:
Within this there are subroutes defined like `/admin-revamp/config/:area`,
these areas could contain any UI imaginable, this is just laying down an
initial idea of the structure and how the sidebar will work. Sidebar links are
currently hardcoded.
Some other changes:
* Changed the `main` and `chat` panels sidebar panel keys to use exported const values for reuse
* Allowed custom sidebar sections to hide their headers with the `hideSectionHeader` option
* Add a `groupSettingArray` setting on `this.siteSettings` in JS, which accepts a group site setting name
and splits it by `|` then converts the items in the array to integers, similar to the `_map` magic for ruby
group site settings
* Adds a `hidden` option for sidebar panels which prevents them from showing in separated mode and prevents
the switch button from being shown
---------
Co-authored-by: Krzysztof Kotlarek <kotlarek.krzysztof@gmail.com>
Why this change?
When the URL `/t/1234?preview_theme_id=21` is loaded, we redirect to
`/t/<topic slug>/1234` stripping the `preview_theme_id` query params.
What does this change do?
This change builds on 61248652cd and
simply adds the `preview_theme_id` query param when redirecting.
* FIX: Secure upload post processing race condition
This commit fixes a couple of issues.
A little background -- when uploads are created in the composer
for posts, regardless of whether the upload will eventually be
marked secure or not, if secure_uploads is enabled we always mark
the upload secure at first. This is so the upload is by default
protected, regardless of post type (regular or PM) or category.
This was causing issues in some rare occasions though because
of the order of operations of our post creation and processing
pipeline. When creating a post, we enqueue a sidekiq job to
post-process the post which does various things including
converting images to lightboxes. We were also enqueuing a job
to update the secure status for all uploads in that post.
Sometimes the secure status job would run before the post process
job, marking uploads as _not secure_ in the background and changing
their ACL before the post processor ran, which meant the users
would see a broken image in their posts. This commit fixes that issue
by always running the upload security changes inline _within_ the
cooked_post_processor job.
The other issue was that the lightbox wrapper link for images in
the post would end up with a URL like this:
```
href="/secure-uploads/original/2X/4/4e1f00a40b6c952198bbdacae383ba77932fc542.jpeg"
```
Since we weren't actually using the `upload.url` to pass to
`UrlHelper.cook_url` here, we weren't converting this href to the CDN
URL if the post was not in a secure context (the UrlHelper does not
know how to convert a secure-uploads URL to a CDN one). Now we
always end up with the correct lightbox href. This was less of an issue
than the other one, since the secure-uploads URL works even when the
upload has become non-secure, but it was a good inconsistency to fix
anyway.
This reverts commit 5f0bc4557f.
Through extensive internal discussion we have decided to revert
this change, as it significantly impacted moderation flow for
some Discourse site moderators, especially around "something else"
flags. We need to re-approach how flags are counted holistically,
so to that end this change is being reverted.
Site data is preloaded on the first page load, which includes categories
data. For sites with many categories, site data takes a long time to
serialize and to transfer.
In the future, preloaded category data will be completely removed.
This commit introduces a new endpoint to search categories and uses it
instead of the categories map that is preloaded using SiteSerializer.
This feature is enabled only when the hidden site setting
lazy_load_categories is enabled and should be used only on sites with
many categories.
The category style site setting is being deprecated. This commit will
show a warning on the admin dashboard if a site isn't using the default
category style (bullet).
At this moment, this feature is under a site setting named
lazy_load_categories.
In the future, categories will no longer be preloaded through site data.
This commit add information about categories in topic list and ensures
that data is used to display topic list items.
Parent categories are serialized too because they are necessary to
render {{category-link}}.
There are cases where a user can copy image markdown from a public
post (such as via the discourse-templates plugin) into a PM which
is then sent via an email. Since a PM is a secure context (via the
.with_secure_uploads? check on Post), the image will get a secure
URL in the PM post even though the backing upload is not secure.
This fixes the bug in that case where the image would be stripped
from the email (since it had a /secure-uploads/ URL) but not re-attached
further down the line using the secure_uploads_allow_embed_images_in_emails
setting because the upload itself was not secure.
The flow in Email::Sender for doing this is still not ideal, but
there are chicken and egg problems around when to strip the images,
how to fit in with other attachments and email size limits, and
when to apply the images inline via Email::Styles. It's convoluted,
but at least this fixes the Template use case for now.
PERF: improve touch, swipe, panning performance on mobile menus
---
* stop event propagation on swipe events: other touch events were stealing a huge amount of time here. Stop event
propagation when handling pan events.
* animate with [web animations api](https://developer.mozilla.org/en-US/docs/Web/API/Web_Animations_API/Using_the_Web_Animations_API)
* prefer translate3d to hint for gpu rendering.
* query document for elements only on start move event, not on subsequent move
events
* remove unused calculations for directioned velocity and distance: all swipe/pan elements function in x/y direction only.
* re-implement scroll locking behavior.
re-implemented scroll lock behavior
---
With stop event propagation, we need to re-implement scroll locking on menu swipes.
Previously, this was using onTouchMove which was costly.
We may now use styling with overflow-y:hidden to lock scroll behavior.
overflow:hidden on html/body elements is now supported by iOS as of 2022
https://bugs.webkit.org/show_bug.cgi?id=153852https://bugs.webkit.org/show_bug.cgi?id=220908
UX: improve swipe
---
Some improvements to get gestures and swipes feeling a little more polished.
This focuses on end gesture, and how we transfer it to a css animation to
complete a menu open/close action.
Multitouch: events may pan, scroll, and zoom - especially on iOS safari.
Cancelling the swipe event allows for a more pleasant zooming experience.
* ease-out on menus opening, linear on close
* calculate animation duration for opening and closing,
attempt to better transfer user swipe velocity to css animation.
* more timely close/open and cleanup from calculated animation timing.
* add animation to closing menus on cloak tap
* correctly animate menus with ease-in and ease-out
* add swipe cancel event on multitouch event
DEV
---
* lean on promises
js animations api gives us promises to listen to. Update test waiters
to use waitForPromise from @ember/test-waiters instead of reigster/unregister.
* convert swipe mixin to its own class.
Convert swipe callbacks to custom events on the element.
Move shared functions for max animation time and close logic to
new shared class.
swipe-events lib uses custom events to trigger callbacks, rather than assuming
implemented hard coded function from the mixin's base class. Custom events are
triggered from the bound element as swipestart, swipeend, swipe
Add shared convenience functions for swipe events so they can be more easily
shared.
A client receives an initial swipe event and can check some state to see if it
wants to handle the swipe event and if it doesn't, calling
`event.preventDefault();` will prevent `swipe` and `swipeend` events from firing
until another distinct swipestart event is fired. Swipe events will auto-cancel on multitouch.
The scroll lock has also exposed as its own utility class.
Why this change?
This ensures that malicious requests cannot end up causing the logs to
quickly fill up. The default chosen is sufficient for most legitimate
requests to the Discourse application.
When truncation happens, parsing of logs in supported format like
lograge may break down.
Why this change?
The `PostsController#create` action allows arbitrary topic custom fields
to be set by any user that can create a topic. Without any restrictions,
this opens us up to potential security issues where plugins may be using
topic custom fields in security sensitive areas.
What does this change do?
1. This change introduces the `register_editable_topic_custom_field` plugin
API which allows plugins to register topic custom fields that are
editable either by staff users only or all users. The registered
editable topic custom fields are stored in `DiscoursePluginRegistry` and
is called by a new method `Topic#editable_custom_fields` which is then
used in the `PostsController#create` controller action. When an unpermitted custom fields is present in the `meta_data` params,
a 400 response code is returned.
2. Removes all reference to `meta_data` on a topic as it is confusing
since we actually mean topic custom fields instead.
Adds UI elements for registering a passkey and logging in with it. The feature is still in an early stage, interested parties that want to try it can use the `experimental_passkeys` site setting (via Rails console).
See PR for more details.
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This commit adds a new Revise... action that can be taken
for queued post reviewables. This will open a modal where
the user can select a Reason from a preconfigured list
(or by choosing Other..., a custom reason) and provide feedback
to the user about their post.
The post will be rejected still, but a PM will also be sent to
the user so they have an opportunity to improve their post when
they resubmit it.
Preloading just metadata is not always respected by browsers, and
sometimes the whole video will be downloaded. This switches to using a
placeholder image for the video and only loads the video when the play
button is clicked.
Currently, `window.I18n` is defined in an old school hand written
script, inlined into locale/*.js by the Rails asset pipeline, and
then the global variable is shimmed into a pseudo AMD module later
in `module-shims.js`.
This approach has some problems – for one thing, when we add a new
V2 addon (e.g. in #23859), Embroider/Webpack is stricter about its
dependencies and won't let you `import from "I18n";` when `"I18n"`
isn't listed as one of its `dependencies` or `peerDependencies`.
This moves `I18n` into a real package – `discourse-i18n`. (I was
originally planning to keep the `I18n` name since it's a private
package anyway, but NPM packages are supposed to have lower case
names and that may cause problems with other tools.)
This package defines and exports a regular class, but also defines
the default global instance for backwards compatibility. We should
use the exported class in tests to make one-off instances without
mutating the global instance and having to clean it up after the
test run. However, I did not attempt that refactor in this PR.
Since `discourse-i18n` is now included by the app, the locale
scripts needs to be loaded after the app chunks. Since no "real"
work happens until later on when we kick things off in the boot
script, the order in which the script tags appear shouldn't be a
problem. Alternatively, we can rework the locale bundles to be more
lazy like everything else, and require/import them into the app.
I avoided renaming the imports in this commit since that would be
quite noisy and drowns out the actual changes here. Instead, I used
a Webpack alias to redirect the current `"I18n"` import to the new
package for the time being. In a separate commit later on, I'll
rename all the imports in oneshot and remove the alias. As always,
plugins and the legacy bundles (admin/wizard) still relies on the
runtime AMD shims regardless.
For the most part, I avoided refactoring the actual I18n code too
much other than making it a class, and some light stuff like `var`
into `let`.
However, now that it is in a reasonable format to work with (no
longer inside the global script context!) it may also be a good
opportunity to refactor and make clear what is intended to be
public API vs internal implementation details.
Speaking of, I took the librety to make `PLACEHOLDER`, `SEPARATOR`
and `I18nMissingInterpolationArgument` actual constants since it
seemed pretty clear to me those were just previously stashed on to
the `I18n` global to avoid polluting the global namespace, rather
than something we expect the consumers to set/replace.
This is part 2 (of 3) for passkeys support.
This adds a hidden site setting plus routes and controller actions.
1. registering passkeys
Passkeys are registered in a two-step process. First, `create_passkey`
returns details for the browser to create a passkey. This includes
- a challenge
- the relying party ID and Origin
- the user's secure identifier
- the supported algorithms
- the user's existing passkeys (if any)
Then the browser creates a key with this information, and submits it to
the server via `register_passkey`.
2. authenticating passkeys
A similar process happens here as well. First, a challenge is created
and sent to the browser. Then the browser makes a public key credential
and submits it to the server via `passkey_auth_perform`.
3. renaming/deleting passkeys
These routes allow changing the name of a key and deleting it.
4. checking if session is trusted for sensitive actions
Since a passkey is a password replacement, we want to make sure to confirm the user's identity before allowing adding/deleting passkeys. The u/trusted-session GET route returns success if user has confirmed their session (and failed if user hasn't). In the frontend (in the next PR), we're using these routes to show the password confirmation screen.
The `/u/confirm-session` route allows the user to confirm their session with a password. The latter route's functionality already existed in core, under the 2FA flow, but it has been abstracted into its own here so it can be used independently.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
When a user creates or edits a post, we already were updating
the security of uploads in the post based on site settings and
their access control post, which is important since these uploads
may be switched from secure/not secure based on configuration.
The `with_secure_uploads?` method on a post is used to determine
whether to use the secure-uploads URL for all uploads in the post,
regardless of their individual security, so if this is false and
some of the posts are still secure when rebaking, we end up with
broken URLs.
This commit just makes it so rebaking via the UI also re-evaluates
upload security so that when the post is loaded again after processing,
all of the uploads have the correct security.
For the admin plugin list we want to be able to link to
a meta topic for plugins, but we have no standard way to
do this at the moment. This adds support for meta_topic_id
alongside other plugin metadata like authors, URL etc,
that gets built into a Meta topic URL in the serializer.
This PR is a first step towards private groups. It redesigns settings/members area of a channel and also drops the "about" page which is now mixed into settings.
This commit is also:
- introducing chat-form, a small DSL to create forms, ideally I would want something in core for this
- introducing a DToggleSwitch page object component to simplify testing toggles
- migrating various components to gjs
We have a custom implementation of #symbolize_keys in our Onebox helpers. This is likely a legacy from when Onebox was a standalone gem. This change replaces all usages with either #deep_symbolize_keys from ActiveSupport, or appropriate option to the JSON parser gem used.
Why this change?
Back in May 17 2023 along with the release of Discourse 3.1, we announced
on meta that the legacy hamburger dropdown navigation menu is
deprecated and will be dropped in Discourse 3.2. This is the link to the announcement
on meta: https://meta.discourse.org/t/removing-the-legacy-hamburger-navigation-menu-option/265274
## What does this change do?
This change removes the `legacy` option from the `navigation_menu` site
setting and migrates existing sites on the `legacy` option to the
`header dropdown` option.
All references to the `legacy` option in code and tests have been
removed as well.
We have a custom implementation of #blank? in our Onebox helpers. This is likely a legacy from when Onebox was a standalone gem. This change replaces all usages with respective incarnations of #blank?, #present?, and #presence from ActiveSupport. It changes a bunch of "unless blank" to "if present" as well.
Currently, if you set an integer site setting in the admin interface and include thousands separators, you will silently configure the wrong value.
This PR replaces TextField inputs for integer site settings with NumberField. It also cleans the numeric input of any non-digits in the backend in case any separators make it through.
- Allows to copy quotes from mobile
- Allows to copy text of a message from mobile
- Allows to select messages by clicking on it when selection has started
Note this commit is also now using toasts to show a confirmation of copy, and refactors system specs helpers concerning secondary actions.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
This is part 1 of 3, split up of PR #23529. This PR refactors the
webauthn code to support passkey authentication/registration.
Passkeys aren't used yet, that is coming in PRs 2 and 3.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
I'm not sure why this is necessary and it doesn't seem to affect
anything if I remove it. Either way, we shouldn't have plugin related
code polluting core.
If a codeblock contains **exactly** the same markdown as an image which has been retrieved by the 'pull hotlinked' job, then it will be replaced with the new URL. This commit adds failing (skipped) tests for this issue.
This commit adds support for an optional `prompt` parameter in the
payload of the /session/sso_provider endpoint. If an SSO Consumer
adds a `prompt=none` parameter to the encoded/signed `sso` payload,
then Discourse will avoid trying to login a not-logged-in user:
* If the user is already logged in, Discourse will immediately
redirect back to the Consumer with the user's credentials in a
signed payload, as usual.
* If the user is not logged in, Discourse will immediately redirect
back to the Consumer with a signed payload bearing the parameter
`failed=true`.
This allows the SSO Consumer to simply test whether or not a user is
logged in, without forcing the user to try to log in. This is useful
when the SSO Consumer allows both anonymous and authenticated access.
(E.g., users that are already logged-in to Discourse can be seamlessly
logged-in to the Consumer site, and anonymous users can remain
anonymous until they explicitly ask to log in.)
This feature is similar to the `prompt=none` functionality in an
OpenID Connect Authentication Request; see
https://openid.net/specs/openid-connect-core-1_0.html#AuthRequest
If a user somehow is looking at an old version of the page and attempts
to like a post they already like. Display a more reasonable error message.
Previously we would display:
> You are not permitted to view the requested resource.
New error message is:
> Oops! You already performed this action. Can you try refreshing the page?
Triggering this error condition is very tricky, you need to stop the
message bus. A possible reason for it could be bad network connectivity.
JS tests expect `show_copy_button_on_codeblocks` to be false (because
default before #81f3f56 was false). There is probably a different
issue at play here with JS tests, I haven't dug into it yet.
Instead, this PR adds a system test to ensure copy button is present
for code blocks with default site settings enabled.
What does this change do?
This change improves the `upload_theme` system test helper method by
automatically setting the uploaded theme as the default theme for the
site. This is to make it easier for users to use the theme instead of
having to fiddle with theme previews. The default behaviour of setting
the uploaded theme as the site's default theme can be disabled by
passing `false` to the `set_theme_as_default` keyword argument.
This change also introduces a new `upload_theme_component` system test
helper method for uploading theme components. The difference between the
`upload_theme` helper method is that the theme component is
automatically added to the site's default theme when uploaded. The theme
which the theme component is added to can be configured via the
`parent_theme_id` keyword argument.
For both methods, we also no longer require the path to the theme to be
provided. Instead both methods will look through the callstack and can
figure out the theme's directory based on the convention that the
theme's system tests are placed in the `spec/system` directory of the
theme folder. This change simplifies the usage of the methods for users
and helps to remove code like `upload_theme_component(File.expand_path("../..", __dir__))`.
This PR introduces three new concepts to Discourse codebase through an addon called "FloatKit":
- menu
- tooltip
- toast
## Tooltips
### Component
Simple cases can be express with an API similar to DButton:
```hbs
<DTooltip
@Label={{i18n "foo.bar"}}
@ICON="check"
@content="Something"
/>
```
More complex cases can use blocks:
```hbs
<DTooltip>
<:trigger>
{{d-icon "check"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
Something
</:content>
</DTooltip>
```
### Service
You can manually show a tooltip using the `tooltip` service:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
tooltipInstance.close();
tooltipInstance.destroy();
// you can also just close any open tooltip through the service
this.tooltip.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const tooltipInstance = this.tooltip.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
tooltipInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Menus
Menus are very similar to tooltips and provide the same kind of APIs:
### Component
```hbs
<DMenu @ICON="plus" @Label={{i18n "foo.bar"}}>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</DMenu>
```
They also support blocks:
```hbs
<DMenu>
<:trigger>
{{d-icon "plus"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</:content>
</DMenu>
```
### Service
You can manually show a menu using the `menu` service:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
menuInstance.close();
menuInstance.destroy();
// you can also just close any open tooltip through the service
this.menu.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const menuInstance = this.menu.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
menuInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Toasts
Interacting with toasts is made only through the `toasts` service.
A default component is provided (DDefaultToast) and can be used through dedicated service methods:
- this.toasts.success({ ... });
- this.toasts.warning({ ... });
- this.toasts.info({ ... });
- this.toasts.error({ ... });
- this.toasts.default({ ... });
```javascript
this.toasts.success({
data: {
title: "Foo",
message: "Bar",
actions: [
{
label: "Ok",
class: "btn-primary",
action: (componentArgs) => {
// eslint-disable-next-line no-alert
alert("Closing toast:" + componentArgs.data.title);
componentArgs.close();
},
}
]
},
});
```
You can also provide your own component:
```javascript
this.toasts.show(MyComponent, {
autoClose: false,
class: "foo",
data: { baz: 1 },
})
```
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Isaac Janzen <50783505+janzenisaac@users.noreply.github.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
What is the problem we are trying to solve here?
The `/` path in our Ember app leads to the `discovery.index` route but
we actually don't render anything on that route leading to a blank page
if the Ember app were to transition to it which is what was happening
when a user adds a custom sidebar section link with the `/` path.
What is the fix there?
Instead of generating a link for the `discovery.index` route when
creating the sidebar section link, we detect if the Ember route is
`discovery.index` and change it to the `discovery.${defaultHomepage()}`
route instead.
Meta topic: https://meta.discourse.org/t/suppress-these-tags-from-summary-emails-settings-is-not-working-in-preview-digest-email/279196?u=osama
Follow-up to 477a5dd371
The `digest_suppress_tags` setting is designed to be a list of pipe-delimited tag names, but the tag-based topic suppression logic assumes (incorrectly) that the setting contains pipe-delimited tag IDs. This mismatch in expectations led to the setting not working as expected.
This PR adds a step that converts the list of tag names in the setting to their corresponding IDs, which is then used to suppress topics tagged with those specific tags.
* FIX: Return 403 instead of redirect on username routes when hidding profiles
* Updated raised error to better reflect the problem to the user
* implemented suggested changes
Previously, a "`some_not_allowed`" warning message was appeared in composer even when all the users mentioned via group are already invited to the private message directly or via other groups.
* FIX: min_personal_message_post_length not applying to first post
Due to the way PostCreator is wired, we were not applying min_personal_message_post_length
to the first post.
This meant that admins could not configure it so PMs have different
limits.
The code was already pretending that this works, but had no reliable way
of figuring out if we were dealing with a private message
This commit adds limits to themes and theme components on the:
- file size of about.json and .discourse-compatibility
- file size of theme assets
- number of files in a theme
The hidden site setting max_drafts_per_user defaults to 10_000 drafts per user.
The longest key should be "topic_<MAX_BIG_INT>" which is 25 characters.
Second iteration of https://github.com/discourse/discourse/pull/23312 with a fix for embroider not resolving an export file using .gjs extension.
---
This PR introduces three new concepts to Discourse codebase through an addon called "FloatKit":
- menu
- tooltip
- toast
## Tooltips
### Component
Simple cases can be express with an API similar to DButton:
```hbs
<DTooltip
@label={{i18n "foo.bar"}}
@icon="check"
@content="Something"
/>
```
More complex cases can use blocks:
```hbs
<DTooltip>
<:trigger>
{{d-icon "check"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
Something
</:content>
</DTooltip>
```
### Service
You can manually show a tooltip using the `tooltip` service:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
tooltipInstance.close();
tooltipInstance.destroy();
// you can also just close any open tooltip through the service
this.tooltip.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const tooltipInstance = this.tooltip.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
tooltipInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Menus
Menus are very similar to tooltips and provide the same kind of APIs:
### Component
```hbs
<DMenu @icon="plus" @label={{i18n "foo.bar"}}>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</DMenu>
```
They also support blocks:
```hbs
<DMenu>
<:trigger>
{{d-icon "plus"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</:content>
</DMenu>
```
### Service
You can manually show a menu using the `menu` service:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
menuInstance.close();
menuInstance.destroy();
// you can also just close any open tooltip through the service
this.menu.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const menuInstance = this.menu.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
menuInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Toasts
Interacting with toasts is made only through the `toasts` service.
A default component is provided (DDefaultToast) and can be used through dedicated service methods:
- this.toasts.success({ ... });
- this.toasts.warning({ ... });
- this.toasts.info({ ... });
- this.toasts.error({ ... });
- this.toasts.default({ ... });
```javascript
this.toasts.success({
data: {
title: "Foo",
message: "Bar",
actions: [
{
label: "Ok",
class: "btn-primary",
action: (componentArgs) => {
// eslint-disable-next-line no-alert
alert("Closing toast:" + componentArgs.data.title);
componentArgs.close();
},
}
]
},
});
```
You can also provide your own component:
```javascript
this.toasts.show(MyComponent, {
autoClose: false,
class: "foo",
data: { baz: 1 },
})
```
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Isaac Janzen <50783505+janzenisaac@users.noreply.github.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This PR introduces three new UI elements to Discourse codebase through an addon called "FloatKit":
- menu
- tooltip
- toast
Simple cases can be express with an API similar to DButton:
```hbs
<DTooltip
@label={{i18n "foo.bar"}}
@icon="check"
@content="Something"
/>
```
More complex cases can use blocks:
```hbs
<DTooltip>
<:trigger>
{{d-icon "check"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
Something
</:content>
</DTooltip>
```
You can manually show a tooltip using the `tooltip` service:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
options
)
// and later manually close or destroy it
tooltipInstance.close();
tooltipInstance.destroy();
// you can also just close any open tooltip through the service
this.tooltip.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const tooltipInstance = this.tooltip.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
tooltipInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
Menus are very similar to tooltips and provide the same kind of APIs:
```hbs
<DMenu @icon="plus" @label={{i18n "foo.bar"}}>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</DMenu>
```
They also support blocks:
```hbs
<DMenu>
<:trigger>
{{d-icon "plus"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</:content>
</DMenu>
```
You can manually show a menu using the `menu` service:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
options
)
// and later manually close or destroy it
menuInstance.close();
menuInstance.destroy();
// you can also just close any open tooltip through the service
this.menu.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const menuInstance = this.menu.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
menuInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
Interacting with toasts is made only through the `toasts` service.
A default component is provided (DDefaultToast) and can be used through dedicated service methods:
- this.toasts.success({ ... });
- this.toasts.warning({ ... });
- this.toasts.info({ ... });
- this.toasts.error({ ... });
- this.toasts.default({ ... });
```javascript
this.toasts.success({
data: {
title: "Foo",
message: "Bar",
actions: [
{
label: "Ok",
class: "btn-primary",
action: (componentArgs) => {
// eslint-disable-next-line no-alert
alert("Closing toast:" + componentArgs.data.title);
componentArgs.close();
},
}
]
},
});
```
You can also provide your own component:
```javascript
this.toasts.show(MyComponent, {
autoClose: false,
class: "foo",
data: { baz: 1 },
})
```
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Isaac Janzen <50783505+janzenisaac@users.noreply.github.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This extends search so it can have consumers that:
1. Can split off "term" from various advanced filters and orders
2. Can build a relation of either order or filter
It also moves a lot of stuff around in the search class for clarity.
Two new APIs are exposed:
`.apply_filter` to apply all the special filters to a posts/topics relation
`.apply_order` to force a particular order (eg: order:latest)
This can then be used by semantic search in Discourse AI
In #20135 we prevented invalid inputs from being accepted in category setting form fields on the front-end. We didn't do anything on the back-end at that time, because we were still discussing which path we wanted to take. Eventually we decided we want to move this to a new CategorySetting model.
This PR moves the require_topic_approval and require_reply_approval from custom fields to the new CategorySetting model.
This PR is nearly identical to #20580, which migrated num_auto_bump_daily, but since these are slightly more sensitive, they are moved after the previous one is verified.
Previous to this change when both `normalize_emails` and `hide_email_address_taken`
is enabled the expected `account_exists` email was only sent on exact email
matches.
This expands it so it also sends an email to the canonical email owner.
Why this change?
Currently, we do not have an easy way to test themes and theme components
using Rails system tests. While we support QUnit acceptance tests for
themes and theme components, QUnit acceptance tests stubs out the server
and setting up the fixtures for server responses is difficult and can lead to a
frustrating experience. System tests on the other hand allow authors to
set up the test fixtures using our fabricator system which is much
easier to use.
What does this change do?
In order for us to allow authors to run system tests with their themes
installed, we are adding a `upload_theme` helper that is made available
when writing system tests. The `upload_theme` helper requires a single
`directory` parameter where `directory` is the directory of the theme
locally and returns a `Theme` record.
Until now, we have allowed testing themes in production environments via `/theme-qunit`. This was made possible by hacking the ember-cli build so that it would create the `tests.js` bundle in production. However, this is fundamentally problematic because a number of test-specific things are still optimized out of the Ember build in production mode. It also makes asset compilation significantly slower, and makes it more difficult for us to update our build pipeline (e.g. to introduce Embroider).
This commit removes the ability to run qunit tests in production builds of the JS app when the Embdroider flag is enabled. If a production instance of Discourse exists exclusively for the development of themes (e.g. discourse.theme-creator.io) then they can add `EMBER_ENV: development` to their `app.yml` file. This will build the entire app in development mode, and has a significant performance impact. This must not be used for real production sites.
This commit also refactors many of the request specs into system specs. This means that the tests are guaranteed to have Ember assets built, and is also a better end-to-end test than simply checking for the presence of certain `<script>` tags in the HTML.
Why this change?
When using a remote capybara driver configured through the
`CAPYBARA_REMOTE_DRIVER_URL` env, webmock is thinking that is an
external request and blocking it. As such, we need to set the URL to the
allowlist for webmock.
Why this change?
When running in a Docker container, we want to bind the Rails server
started by Capybara to 0.0.0.0 instead of localhost. This is done via
the `server_host` config for Capybara which can now be configured via
the `CAPYBARA_SERVER_HOST` env.
Discourse core now builds and runs with Embroider! This commit adds
the Embroider-based build pipeline (`USE_EMBROIDER=1`) and start
testing it on CI.
The new pipeline uses Embroider's compat mode + webpack bundler to
build discourse code, and leave everything else (admin, wizard,
markdown-it, plugins, etc) exactly the same using the existing
Broccoli-based build as external bundles (<script> tags), passed
to the build as `extraPublicTress` (which just means they get
placed in the `/public` folder).
At runtime, these "external" bundles are glued back together with
`loader.js`. Specifically, the external bundles are compiled as
AMD modules (just as they were before) and registered with the
global `loader.js` instance. They expect their `import`s (outside
of whatever is included in the bundle) to be already available in
the `loader.js` runtime registry.
In the classic build, _every_ module gets compiled into AMD and
gets added to the `loader.js` runtime registry. In Embroider,
the goal is to do this as little as possible, to give the bundler
more flexibility to optimize modules, or omit them entirely if it
is confident that the module is unused (i.e. tree-shaking).
Even in the most compatible mode, there are cases where Embroider
is confident enough to omit modules in the runtime `loader.js`
registry (notably, "auto-imported" non-addon NPM packages). So we
have to be mindful of that an manage those dependencies ourselves,
as seen in #22703.
In the longer term, we will look into using modern features (such
as `import()`) to express these inter-dependencies.
This will only be behind a flag for a short period of time while we
perform some final testing. Within the next few weeks, we intend
to enable by default and remove the flag.
---------
Co-authored-by: David Taylor <david@taylorhq.com>
What motivated this change?
We are currently working on allowing system tests to be run within a
Docker container. While system tests are usually ran in chrome headless
mode, it is useful to also be able to run the system tests with chrome
in the non-headless mode. However, running a GUI application from within
a docker container is not usually recommended and from our research
quite difficult. As such, we want to allow running system tests against
a remote browser.
For example, one can run a `chromedriver` server on localhost and then
configure Capybara to connect to the `chromedriver` from within the
container.
What does this change do?
This change adds support for a `CAPYBARA_REMOTE_DRIVER_URL` env variable
which will switch Capybara to use the remote driver instead of the
`chrome` driver. Currently, we expect the remote driver to be a
`chromedriver` server.
Doing this because the same issue exists as did for chromedriver
fixed by TGX in X for minio. Need time to add support for parallel
tests in the minio_runner gem so this doesn't happen:
```
Failure/Error:
File.open(dest, "wb", s.stat.mode) do |f|
IO.copy_stream(s, f)
f.chmod(f.lstat.mode)
end
Errno::ETXTBSY:
Text file busy @ rb_sysopen - /github/home/.minio_runner/minio
./lib/freedom_patches/copy_file.rb:10:in `copy_file'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/binary_manager.rb:49:in `block in download_binary'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/network.rb:72:in `download'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/binary_manager.rb:48:in `download_binary'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/binary_manager.rb:29:in `install'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner/binary_manager.rb:9:in `install'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner.rb:62:in `install_binaries'
./vendor/bundle/ruby/3.2.0/gems/minio_runner-0.1.1/lib/minio_runner.rb:50:in `start'
./spec/support/system_helpers.rb:157:in `setup_s3_system_test'
```
Currently, if the review queue has both a flagged post and a flagged chat message, one of the two will have some of the labels of their actions replaced by those of the other. In other words, the labels are getting mixed up. For example, a flagged chat message might show up with an action labelled "Delete post".
This is happening because when using bundles, we are sending along the actions in a separate part of the response, so they can be shared by many reviewables. The bundles then index into this bag of actions by their ID, which is something generic describing the server action, e.g. "agree_and_delete".
The problem here is the same action can have different labels depending on the type of reviewable. Now that the bag of actions contains multiple actions with the same ID, which one is chosen is arbitrary. I.e. it doesn't distinguish based on the type of the reviewable.
This change adds an additional field to the actions, server_action, which now contains what used to be the ID. Meanwhile, the ID has been turned into a concatenation of the reviewable type and the server action, e.g. post-agree_and_delete.
This still provides the upside of denormalizing the actions while allowing for different reviewable types to have different labels and descriptions.
At first I thought I would prepend the reviewable type to the ID, but this doesn't work well because the ID is used on the server-side to determine which actions are possible, and these need to be shared between different reviewables. Hence the introduction of server_action, which now serves that purpose.
I also thought about changing the way that the bundle indexes into the bag of actions, but this is happening through some EmberJS mechanism, so we don't own that code.
This adds a new secure_uploads_pm_only site setting. When secure_uploads
is true with this setting, only uploads created in PMs will be marked
secure; no uploads in secure categories will be marked as secure, and
the login_required site setting has no bearing on upload security
either.
This is meant to be a stopgap solution to prevent secure uploads
in a single place (private messages) for sensitive admin data exports.
Ideally we would want a more comprehensive way of saying that certain
upload types get secured which is a hybrid/mixed mode secure uploads,
but for now this will do the trick.
Admins are always able to send PMs, so it doesn't make
sense that they shouldn't be able to convert topics just
because they aren't in personal_message_enabled_groups.
The 'discourse' script will now include all its related webpack chunks. That means that, if you have compiled JS assets, this spec started failing. This commit switches the specs to use a different js file, which does not have associated webpack chunks.
Previously we would respect it if the filter was `nil`, but if `default` was explicitly passed then it would ignore the category order settings. This explicit passing of `filter=default` happens for some types of navigations in the JS app.
This extends the fix from 92bc61b4be
We're seeing a large number of log noise from this endpoint due to malicious scanners that are trying to send clever params and seeing if they can break something.
This change simply rescues any NoMethodError during parameter parsing and re-raises a Discourse::InvalidParameters exception, which will be caught and render a 400.
This patch adds a new shortcut to allow archiving private messages. When
on a private message page, just type `a` to archive it. Typing `a` on an
already archived message will move it back to inbox.
Chat review queue flags were missing the context message above the actions.
This is probably because the (reasonably complex) logic was somewhat hard-coded to posts. After some investigation I concluded we can reuse this logic with some small amendments.
Previously we were patching ember-cli so that it would split the test bundle into two halves: the helpers, and the tests themselves. This was done so that we could use the helpers for `/theme-qunit` without needing to load all the core tests. This patch has proven problematic to maintain, and will become even harder under Embroider.
This commit removes the patch, so that ember-cli goes back to generating a single `tests.js` bundle. This means that core test definitions will now be included in the bundle when using `/theme-qunit`, and so this commit also updates our test module filter to exclude them from the run. This is the same way that we handle plugin tests on the regular `/tests` route, and is fully supported by qunit.
For now, this keeps `/theme-qunit` working in both development and production environments. However, we are very likely to drop support in production as part of the move to Embroider.
Our Ember build compiles assets into multiple chunks. In the past, we used the output from ember-auto-import-chunks-json-generator to give Rails a map of those chunks. However, that addon is specific to ember-auto-import, and is not compatible with Embroider.
Instead, we can switch to parsing the html files which are output by ember-cli. These are guaranteed to have the correct JS files in the correct place. A <discourse-chunked-script> will allow us to easily identify which chunks belong to which entrypoint.
In future, as we update more entrypoints to be compiled by Embroider/Webpack, we can easily introduce new wrappers.
Previously applied in 2c58d45 and reverted in 24d46fd. This version has been updated for subfolder support.
This fixes a regression introduced by an earlier change which changed `ReviewableQueuedPost`
record creation to use the more appropriate `target_created_by_id` for the author of the post
being queued instead of setting it to the creator(system user) of the `ReviewableQueuedPost` record.
They're both constant per-instance values, there is no need to store them
in the session. This also makes the code a bit more readable by moving
the `session_challenge_key` method up to the `DiscourseWebauthn` module.
Why this change?
As part of our ongoing efforts to security harden the Discourse
application, we are adding the `cross_origin_opener_policy_header` site setting
which allows the `Cross-Origin-Opener-Policy` response header to be set on requests
that preloads the Discourse application. In more technical terms, only
GET requests that are not json or xhr will have the response header set.
The `cross_origin_opener_policy_header` site setting is hidden for now
for testing purposes and will either be released as a public site
setting or be remove if we decide to be opinionated and ship a default
for the `Cross-Origin-Opener-Policy` response header.
Followup to eea74e0e32. Site settings
which are a list without a list_type should also have the _map
extension added which returns an array based on split("|").
For example:
```
SiteSetting.post_menu_map
=> ["read", "like"]
```
Tries to fix the composer upload spec by making the upload
slow enough to allow clicking the Cancel button, and improves
generally the API for CDP network changes.
When navigating around, we make ajax requests with a parameter like `?filter=latest`. This results in the TopicQuery being set up with `filter: "latest"` as a string. The logic introduced in fd9a5bc0 checks for equality with `:latest` and `:unseen` symbols, which didn't work correctly in this situation
This commit makes the logic detect both strings and symbols, and adds a spec for the behaviour.
This adds support for oneboxing WEBP and AVIF images in posts and fixing
oneboxing fixes download remote images for those formats too.
Reported in https://meta.discourse.org/t/-/276433?u=falco
This could happen after you had already change the separation mode and would cause unexpected bugs.
This PR also adds more tests around using switch buttons with chat.
Reverts e2705df and re-lands #23187 and #23219.
The issue was incorrect order of execution of Rails' `assets:precompile` task in our own precompilation stack.
Co-authored-by: David Taylor <david@taylorhq.com>
Short answer -- the problem is the video thumbnail generator & uploader
code added a couple of months back in f144c64e13.
It was implemented as another Mixin which overrides `this._uppyInstance`
when uploading the video thumbnail after the initial upload is complete,
which means the composer's `this._uppyInstance` value is overridden,
and it loses all of its preprocessors & upload code.
This is generally a problem with the Mixin based architecture that I
used for the Uppy code, which we need to remove at some point and
refacotr.
The most ideal thing to do here would be to convert this video thumbnail
code into an Uppy
[postprocessor](https://uppy.io/docs/uppy/#addpostprocessorfn) plugin,
which runs on each upload after they are complete. I started looking
into this, and the main hurdle here is adding support to tracking the
progress of postprocessors to
[ExtendableUploader](cf42466dea/app/assets/javascripts/discourse/app/mixins/extendable-uploader.js)
so that is out of scope at this time.
The fix here makes it so the ComposerVideoThumbnailUppy code is no
longer a Mixin, but acts more like a normal class, a pattern which
we have used in chat. I also clean up a lot of the thumbnail uploader
code and remove some unnecessary things.
Attempted to add a system spec, but video streaming does not work
in Chrome for Testing at this time, and it is needed for the
onloadedmetadata event.
This commit adds some system specs to test uploads with
direct to S3 single and multipart uploads via uppy. This
is done with minio as a local S3 replacement. We are doing
this to catch regressions when uppy dependencies need to
be upgraded or we change uppy upload code, since before
this there was no way to know outside manual testing whether
these changes would cause regressions.
Minio's server lifecycle and the installed binaries are managed
by the https://github.com/discourse/minio_runner gem, though the
binaries are already installed on the discourse_test image we run
GitHub CI from.
These tests will only run in CI unless you specifically use the
CI=1 or RUN_S3_SYSTEM_SPECS=1 env vars.
For a history of experimentation here see https://github.com/discourse/discourse/pull/22381
Related PRs:
* https://github.com/discourse/minio_runner/pull/1
* https://github.com/discourse/minio_runner/pull/2
* https://github.com/discourse/minio_runner/pull/3
In most cases, deleting a user from outside the review UI will also delete any pending reviewables for that user. This was not working in some cases, e.g. for reviewables created due to "fast typer" violations.
This was happening because UserDestroyer only automatically resolves flagged posts.
After this change, in addition to existing checks, look for ReviewablePost where the post was created by the user and reject them if present.
* Minor style adjustments
* Removes "all" count because it's redundant to the count on New
* Updates generic class names with -- modifier to follow BEM and help avoid class name collisions
* Hides the toggle when bulk select is enabled (the UI ends up being too busy)
Manipulating theme module paths means that the paths you author are not the ones used at runtime. This can lead to some very unexpected behavior and potential module name clashes. It also meant that the refactor in 16c6ab8661 was unable to correctly match up theme connector js/templates.
While this could technically be a breaking change, I think it is reasonably safe because:
1. Themes are already forced to use relative paths when referencing their own modules (since they're namespaced based on the site-specific id). The only time this might be problematic is when theme tests reference modules in the theme's main `javascripts` directory
2. For things like components/services/controllers/etc. our custom Ember resolver works backwards from the end of the path, so adding `discourse/` in the middle will not affect resolution.
This is a bug that happens only when the current date is less than 90 days from a date on which the time zone transitions into or out of Daylight Savings Time.
In these conditions, bulk invites show the time of day of their expiration as being 1 hour later than the current time.
Whereas it should match the time of day the invite was generated.
This is because the server has not been using the user's timezone in calculating the expiration time of day. This PR fixes issue by considering the user's timezone when doing the date math.
https://meta.discourse.org/t/bulk-invite-logic-to-generate-expire-date-bug/274689
`ReviewableQueuedPost` got refactored a while back to use the more
appropriate `target_created_by` for the user of the post being queued
instead of `created_by`. The change was not extended to the `DELETE
/review/:id` endpoint leading to error responses for a user attempting
to deleting their own queued post.
This fix extends the `Reviewable` lookup implementation in
`ReviewablesController#destroy` and Guardian implementation to account
for this change.
This PR adds a new toggle to switch the (new) /new list between showing topics with new replies (a.k.a unread topics), new topics, or everything mixed together.
When hiding a post (essentially updating hidden, hidden_at, and hidden_reason_id) our callbacks are running the whole battery of post validations. This can cause the hiding to fail in a number of edge cases. The issue is similar to the one fixed in #11680, but applies to all post validations, none of which should apply when hiding a post.
After some code reading and discussion, none of the validations in PostValidator seem to be relevant when hiding posts, so instead of just skipping unique check, we skip all post validator checks.
After fbe0e4c we always pass a block into these methods.
So yield inside the export methods works and there is no need
anymore to wrap them into enumerators.
What is the problem here?
The `selenium-webdriver` gem is responsible for downloading the
right version of the `chromedriver` binary and it downloads it into the
`~/.cache/selenium` folder. THe problem here is that when a user runs `bin/turbo_rspec spec/system`
for the first time, all of the processes will try to download the
`chromedriver` binary to the same path at the same time and will lead
to concurrency errors.
What is the fix here?
Before running any RSpec suite, we first check if the `.cache/selenium`
folder is present. If it is not present, we use a file system lock to
download the `chromedriver` binary such that other processes that runs
after will not need to install the `chromedriver` binary.
The long term fix here is to get `selenium-manager` to download the `chromedriver` binary to a unique path for each
process but the `--cache-path` option for `selenium-manager` is currently not supported in `selenium-webdriver`.
So we have to order by calling `find_each(order: :desc)`.
Note that that will order rows by Id, not by `last_match_at`
as we tried before (though that didn't work).
What is the problem here?
When transiting between `/filter` routes with different `q` query
params, the input field is not updating to include the values in the `q`
query param. This was because we were setting the value of the input
field in the constructor of the controller but controllers are actually
singletons in Ember so setting the value of the input field is only done
once when the controller is initialised.
What is the fix here?
Instead of setting the value of the input field in the controller, we
set the value in the `setupController` hook in the route file.
We can no long user Webdriver - SeleniumHQ/selenium#11066. Bumping selenium-webdriver did the trick, as well as manually setting the user_agent for mobile system specs. Unsure what changed to make this necessary, but it is necessary to get the app to boot in mobile view.
* scrub non-a html tags from tag descriptions on create, strips all tags from tag description when displayed in tag hover
* test for tag description links
* UX: basic render-tag test
* UX: fix linting
* UX: fix linting
* fix broken tests
* Update spec/models/tag_spec.rb
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
* UX: use has_sanitizable_fields instead of has_scrubbable_fields to ensafen tag.description
---------
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
The category feature that automatically closes topics does it silently
This amends it so `rake topics:apply_autoclose` which does retroactive
closing will also do so silently.
Our code assumed the content_range interval was inclusive, but they are open-ended due to Postgres' [discrete range types](https://www.postgresql.org/docs/current/rangetypes.html#RANGETYPES-DISCRETE), meaning [1,2] will be represented as [1,3).
It also fixes some flaky tests due to test data not being correctly setup and the registry not being resetted after each test.
When we receive the stream parameter, we'll queue a job that periodically publishes partial updates, and after the summarization finishes, a final one with the completed version, plus metadata.
`summary-box` listens to these updates via MessageBus, and updates state accordingly.
The OpenComposer mixin comes from a time before we had a composer service. As well as being a general cleanup/refactor, this commit aims to removes interlinking between composer APIs and the discovery-related controllers which are being removed as part of #22622.
In summary, this commit:
- Removes OpenComposer mixin
- Adds and updates composer service APIs to support everything that `openComposer` did
- Updates consumers to call the composer service directly, instead of relying on the mixin (either directly, or via a route-action which bubbled up to some parent)
- Deprecates composer-related methods on `DiscourseRoute` and on the application route
This commit moves the calendar date and time picker shown in
the local dates modal into a core component that can be reused
in other places. Also add system specs to make sure there isn't
any breakages with this feature, and a section to the styleguide.
Why this change?
By default in the test environment, MessageBus used the memory backend
which means all messages are stored in an in-memory data structure. However,
the in-memory data structure is not cleared after each system test so we
have the potential to be leaking stuff between system tests.
Similarly for the defer queue which process work in another thread, we
want to ensure that the defer queue processes everything it has to do
before the transaction is rolled back.
Prior to this fix we would output an image with no width/height which would then bypass a large part of `CookedProcessorMixin` and have no aspect ratio. As a result, an image with no size would cause layout shift.
It also removes a fix for oneboxes in chat messages due to this case.
If a selenium finder takes the full wait duration to resolve, that means it has been written inefficiently. Most likely a matcher has been negated incorrectly.
This commit introduces a patch which will raise an error in this situation so that we can catch the issues while developing specs.
This commit also fixes chat's visit_thread helper. It was spinning on `has_css?(".chat-skeleton")` for the full selenium wait duration, and then returns false. That's because the thread is often already fully loaded before `has_css?` is even called. It's now updated to only look for the final expected state.
There is no decorateCooked equivalent for small action posts,
so we need to manually call decorateHashtags when there is a custom
message for small action posts in order for the hashtags to get
their coloured icon/square.
This commit removes any logic in the app and in specs around
enable_experimental_hashtag_autocomplete and deletes some
old category hashtag code that is no longer necessary.
It also adds a `slug_ref` category instance method, which
will generate a reference like `parent:child` for a category,
with an optional depth, which hashtags use. Also refactors
PostRevisor which was using CategoryHashtagDataSource directly
which is a no-no.
Deletes the old hashtag markdown rule as well.
This fixes:
- a regression from 30c152c, where navigating to a topic's last reply
via keyboard would lose track of the topic when returning to the topic
list
- an issue where if a topic's last post is a small post, navigating to it
via keyboard would not focus the post
Co-authored-by: David Taylor <david@taylorhq.com>
