Going from /latest?f=tracked to /latest will result in three
different topic list requests because the query params are not
considered when determining if the route is staying the same.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
It used to change the category of the topic, instead of the destination
category (topic.category_id instead of topic.shared_draft.category_id).
The shared drafts controls were displayed only if the current category
matched the 'shared drafts category', which was not true for shared
drafts that had their categories changed (affected by the previous bug).
Before this change we were setting the input after the query has been done, resulting in us overwriting the input if the user types during the query.
We don't need to update it after the query, we just need to ensure it's set when we load the page and then it should stay in sync.
A while ago we made a change to display a warning after installing a theme component when the admin tries to leave the page without adding the new installed component to any themes (see 5e29ae3ef5).
However there is an edge case that we forgot to address, and that's when an admin installs a component and then immediately opens the install modal again to install another one which can result in the warning being shown twice at the same time.
This PR prevents that by showing the warning when opening the install modal if the conditions are met (new component and not added to any themes) instead of showing it after installing the second component.
Installing multiple copies of the same theme/component is possible, but you rarely need to actually have multiple copies installed. We've seen many times new admins installing duplicates of components because they were unaware it was already installed. This PR makes the theme installer modal loop through the existing themes when you click on 'install', and if there is a theme with a URL that matches the URL you entered, a warning will show up and you will need to click 'install' again to proceed.
When you type # or @ in the search box, a popup appears with
autocomplete suggestions. Currently, when the popup is rendered it has
the first item selected and upon pressing Enter, the first item is
inserted into the search box. The problem with this behavior is that the
first suggestion may not be what you want, and if you are typing quickly
and hit enter, the first suggestion (which is not what you want) is
inserted in the search box.
This PR amends the popup so that it has no suggestions selected by
default which means the enter key will not insert anything unless you
select a suggestion via the up or down arrow keys.
The notification panel gets resized and the JS uses maxWidth of 320.
This tends to fight with the CSS causing notifications to "jump" a bit when a new one lands.
Scrolling was not working as expected after clicking the browser back button and navigating back to the tag topic list. We need to wrap the scroll inside a debounce function to ensure that the "window.pageYOffset" property is populated before our function runs.
Include the enable_filtered_replies_view site setting in the admin UI
Adds title label to in-reply-to widget
Invokes the filtered UI when using replies_to_post_number as a query
parameter
Replaces the "Show All" button icon
Fixes grammar for "Viewing 1 reply to..." label
This is an edge-case of 9fb3629. An admin could set the shared draft category to one where both TL2 and TL3 users have access but only give shared draft access to TL3 users. If something like this happens, we need to make sure that TL2 users won't be able to see them, and they won't be listed on latest.
Before this change, `SharedDrafts` were lazily created when a destination category was selected. We now create it alongside the topic and set the destination to the same shared draft category.
* FEATURE: Allow categroy group moderators to list/unlist topics
If enabled via SiteSettings, a user belonging to a group which has been granted category group moderator privileges should be able to list/unlist topics belonging to the appropraite category.
chromium may report float device pixel ratio below 1.5 that is still clearly retina:
```
window.devicePixelRatio
1.4999998807907104
```
We used to round this down to 1 and not provide these browsers with retina avatars.
New algorithm is much more forgiving, anything over 1.1 gets 2x images, anything over 2.1 gets 3x images.
* FIX: 'false' value was treated as a truthy value
For example, latest.json?no_subcategories=false used to have set
no_subcategories to the string value of 'false', which is not false.
* DEV: Remove dead code
* FIX: Redirect to /none under the right conditions
These conditions are:
- neither /all or /none present
- only for default filter
* FIX: Build correct topic list filter
/none was never added to the topic list filter
* FIX: Do not show count for subcategories if 'none' category
* FIX: preload_key must contain /none if no_subcategories
We want to wrap the `Ember.run.debounce` function and internally call `Ember.run` instead when running tests.
This commit changes discourseDebounce to work the same way as `Ember.run.debounce`.
Now that `discourseDebounce` works exactly like `Ember.run.debounce`, let's replace it and only use `DiscourseDebounce` from now on.
Move debounce to discourse-common to be able to reuse it in different bundles
Keep old debounce file for backwards-compatibility
Safari overlays its own nav at the bottom 10% or so of the screen. This
makes buttons in that area virtually unclickable, so to ensure buttons
there are reachable, we need to add enough bottom padding to menu panels.
This is a tiny change that will allow users to hover the date element of a full page search result to see the raw date. It's not always easy to know what the exact date was "20d" ago, so hopefully this helps when it's relevant.
The root cause of the issue was that the route was overriding the 'error' action from the correctly implemented handler in routes/application.js.
Remove the custom handler, and the duplicated template logic for displaying the errorHtml.
Fixes: e16b3da04a
Being that system badges ship with every instance of Discourse, we've opted to define the name, description, and long description in our locales files to promote translation into other languages. When an admin visited the overview page of a system badge in their admin panel, they were met with disabled inputs for these text properties. The problem is that we failed to educate the admin that the text needs to be managed via the site text customization settings.
This change adds a small "Customize Text" link under theses inputs that takes the admin to the specific site text customization where they can make desired changes.
* FIX: Restore dismissing the first notification
Reverts the temporary fix (8e4fea897e) and restores the feature introduced in e638d43f0a.
The issue that was the reason for the revert (https://meta.discourse.org/t/logins-redirects-to-missing-notifications-page/149718) was a combination of two bugs:
1. Fixed in this commit - the click listener was accidentally registered also for logged-out users. This meant that the first click on a page always trigger an AJAX call to the notifications endpoint (`/notifications?recent=true&limit=5`), which returned a 403 error. Now, this code is run only when the user is logged in.
2. A still unknown bug that I could not reproduce, which was somehow setting the login redirect cookie to the URL of that previously failed AJAX request.
The propagated promise failure from model() caused the router to reject future route transitions, even though it correctly routed to the last-resort 404 page.
Co-authored-by: Jeff Wong <awole20@gmail.com>
A small change that would allow components to extend the tag
display in the filter dropdown, like they can in other contexts.
Was requested in the tag icons component, see
https://meta.discourse.org/t/tag-icons-component/109757/60?u=pmusaraj
The PR also standardises tag styling in select-kit dropdowns.
* FIX: show/hide ignored users preferences
based on the current user trust level and the appropriate site setting.
* Allow us to await the `updateCurrentUser` call
Co-authored-by: Robin Ward <robin.ward@gmail.com>
If a user could not set tags because they had a trust level lower than
min_trust_level_to_tag_topics site setting, the "Create Topic" button
from a tag page would still show up and be enabled. Clicking it caused
the composer model to silently have the tags set.
Instead we use the inline `hbs` helper. Note in the non-Ember CLI
version this will not actually inline compile, but it will still work
for all our tests.
We can't use erb in ember-cli, and it seems the emoji groups rarely
change anyway. This commit migrates the ERB to pre-rendered javascript
that is updated via the `rake javascript:update_constants` task.
- frowning was using slighty_frowning
- slightly_frowning was using frowning
- grinning_face_with_smiling_eyes was not defined
- fronwing_face_with_open_mouth was not defined
The list of SVG icons is unavailable in production, and the previous
refactor here was causing incorrect and noisy console warnings.
This also parses the `svgIconList` string in a dev environment, icons
should now match more accurately.
* fixed header/favicon's vertical alignment
* slightly increased header margin
* made the onebox padding symmetrical
* increased the right margin on small image elements
* removed extraneous pre bottom margin
Force pushing a commit to a theme repository used to break the updater,
because the system was not able to count the commits behind the old and
new version. This operation failed because a force push deleted the old
commits.
The user was prompted with a simple "500 server error" message.
* FEATURE: display error if Oneboxing fails due to HTTP error
- display warning if onebox URL is unresolvable
- display warning if attributes are missing
* FEATURE: Use new Instagram oEmbed endpoint if access token is configured
Instagram requires an Access Token to access their oEmbed endpoint. The requirements (from https://developers.facebook.com/docs/instagram/oembed/) are as follows:
- a Facebook Developer account, which you can create at developers.facebook.com
- a registered Facebook app
- the oEmbed Product added to the app
- an Access Token
- The Facebook app must be in Live Mode
The generated Access Token, once added to SiteSetting.facebook_app_access_token, will be passed to onebox. Onebox can then use this token to access the oEmbed endpoint to generate a onebox for Instagram.
* DEV: update user agent string
* DEV: don’t do HEAD requests against news.yahoo.com
* DEV: Bump onebox version from 2.1.5 to 2.1.6
* DEV: Avoid re-reading templates
* DEV: Tweaks to onebox mustache templates
* DEV: simplified error message for missing onebox data
* Apply suggestions from code review
Co-authored-by: Gerhard Schlager <mail@gerhard-schlager.at>
`setPermissionsGroups` would initialize an empty permissions object whenever new groups were added to the Tag Group. This meant that if you selected the `visible` permission and then added groups to the Tag Group, the `visible` permission would be obliterated and the Tag Group would be treated as though it was `private`.
This moves the library into our lib folder, and refactored it to more
modern Javascript. I've kept the MIT license at the top of the file.
Doing this allows us to import it as a library in Ember CLI and ditch
yet another global variable.
Themes marked for auto update will be automatically updated when
Discourse is updated. This is triggered by discourse_docker or
docker_manager running Rake task 'themes:update'.
Here's how draft saving process works currently:
- if only title is present (no reply) the draft is saved
- if only reply is present (no title) the draft is saved
- if both title and reply are present, and reply length is less than
`min_post_length` and the title length is less than
`min_topic_title_length`, then the draft is saved
- if both title and reply are present, and reply length is less than
`min_post_length`, then the draft is not saved
The current draft saving conditions are complex to understand and is
causing confusion as seen here: https://meta.discourse.org/t/draft-is-not-being-saved-when-creating-a-new-pm/149990/6?u=techapj
This commit updates the process to always save the draft if either title
or reply exists.
Allowing the editing of remote themes has been something Discourse has advised against for some time. This commit removes the ability to edit or upload files to remote themes from Admin > Customize to enforce the recommended practice.
* FIX: paste the spreadsheet to the composer
If we paste spreadsheet with the missing label we receive
`" this \n1 2"`
If we trim whitespace at the beginning then our later calculation to determine if it is a table is incorrect:
```
const columns = rows.map((r) => r.split("\t").length);
const isTable =
columns.reduce((a, b) => a && columns[0] === b && b > 1)
```
https://meta.discourse.org/t/pasting-from-spreadsheet-wont-work-if-corner-cell-is-empty/169443
Fixes two small issues:
- buttons stayed disabled after deleting a category
- on a newly-created category, the Edit button was missing on the category landing page
This makes it much easier to check the staff action logs for a specific site setting. A small history icon will appear when hovering over a site setting name. On click, you will be taken to the pre-filtered staff action log for the site setting.
This commit removes the duplicate category description on sub categories in the category list. I believe this went unnnoticed because we are hiding these by default.
The REST adapter generates paths with the /tags/ prefix indescriminately,
but individual tag paths have been moved under the /tag/ prefix to allow
tags with names that would otherwise cause ambiguity like c.
PostDestroyer should accept the option to permanently destroy post from the database. In addition, when the first post is destroyed it destroys the whole topic.
Currently, that feature is limited to private messages and creator of the post. It will be used by discourse-encrypt to explode encrypted private messages.
Paths prefixed with /tag/ are exclusively for when the tag name is the
next string in the path. Therefore, when a category is being used as
context, the path should start with /tags/ instead.
Per Google, sites are encouraged to upgrade from Universal Analytics v3 `analytics.js` to v4 `gtag.js` for Google Analytics tracking. We're giving admins the option to stay on the v3 API or migrate to v4. Admins can change the implementation they're using via the `ga_version` site setting. Eventually Google will deprecate v3, but our implementation gives admins the choice on what to use for now.
We chose this implementation to make the change less error prone, as many site admins are using custom events via the v3 UA API. With the site stetting defaulted to `v3_analytics`, site analytics won't break until the admin is ready to make the migration.
Additionally, in the v4 implementation, we do not enable automatic pageview tracking (on by default in the v4 API). Instead we rely on Discourse's page change API to report pageviews on transition to avoid double-tracking.
We have a div that is inside #main because of the history of Ember explained here. Once we have Ember cli, we can use optional feature flags and disable creating this div with application-template-wrapper: false, and refactor this code and any plugins that rely on that div being present (some plugin regarding remote collaboration??).
* DEV: Move toHumanSize patch into I18n proper
The patch wasn't loaded in Ember CLI environment causing translation discrepancies.
* DEV: Remove String.prototype.i18n
I don't think this patch is needed. Let the CI prove me wrong. :P
* FEATURE - allow category group moderators to delete topics
* Allow individual posts to be deleted
* DEV - refactor for new `can_moderate_topic?` method
We didn't update review settings even if the UI says it was successfully saved. After #11097, we started to clone each setting and store the changes there instead, but we still use the original objects when we perform the save action.
Users could be silenced or suspended by two staff members at the same time and
would not be aware of it. This commit shows an error message if another penalty
has been applied.
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
@danielwaterworth suggested taking a look at this when reviewing a plugin using this API.
When declaring a new nav item using `addNavigationBarItem` and including the `href` attribute, we don't currently process that URL to be subfolder compatible.
Nav bar items coming in via the API are considered `ExtraNavItem` and the `href` value is passed straight through to the `buildItems` method, vs using the computed href method. This PR adds a simple `getURL` call on that href value to ensure it's subfolder-safe.
I also accounted for the `customHref` function in the API to make those URLs subfolder safe as well.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in Javascript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Ensures the newly created category record gives the current user permission to create a new topic and sets her notification level to the default (regular).
After 5fc239b535, the category dropdown
was showing "undefined" for the "all-categories" and "no-categories"
messages. This commit introduces a check to run the HTML parser only if
we're dealing with a real category, which fixes the above issue.
Using arrow functions changes `this` context, which is undesired in tests, e.g. it makes it impossible to setup things like pretender (`this.server`) in `beforeEach` hooks.
Ember guides always use classic functions in examples (e.g. https://guides.emberjs.com/release/testing/test-types/), and that's what it uses in its own test suite, as do various addons and ember apps.
It was also already used in Discourse where `this` was required. Moving forward, it will be needed in more places as we migrate toward ember-cli.
(I might later add a custom rule to eslint-discourse-ember to enforce this)
We remove the slow mode composer message and provide better messages when rejecting new posts and edits. The client now validates if the user tries to post again immediately. Finally, we replaced the `hourglass-end` icon with the `hourglass-start` one.
This reverts commit e3de45359f.
We need to improve out strategy by adding a cache breaker with this change ... some assets on CDNs and clients may have incorrect CORS headers which can cause stuff to break.
When `must_approve_users` is enabled then staff users assume that all
users will have to be approved manually. But in case of invite we
auto-approve users if they are invited by users. This commit adds an
info on the bottom of invite modal informing staff users that new users
will be auto-approved as soon as they accept invite.
This is a way to detect that Discourse isn't able to receive online updates from
the server, and will be used to trigger an UI warning to the user that the session
is working on offline mode.
Meta request https://meta.discourse.org/t/offline-indicator/123000?u=falco
This is because the translations were being applied when the JS files
were parsed, which is before the overrides are loaded.
The solution is to return the filters in a function which is executed
when they are needed.
In newer Embers jQuery is removed. There is a `find` but it only returns
one element and not a jQuery selector. This patch migrates our code to a
new helper `queryAll` which allows us to remove the global.
Most proxies out there will work with chunked encoding transfer. However
some proxies buffer, causing large delays which in turn force the message
bus client to disable chunked encoding. This wastes a request to the message
bus causing superfluous load on the server.
Also
- enableLongPolling is already default true in the client, no need to set it
- remove confusing comment about zepto
Before deleting a topic that has a high number of views (default of 5000), the user will be prompted with a confirmation popup. This works for all delete buttons on the topic located in: topic-timeline, topic-admin-menu, topic-footer-buttons, and post-menu if the post's ID is 1.
The delete button will be disabled while deletion is in progress, to prevent any unwanted behavior.
A site setting is also available to change the minimum amount of views required to display the confirmation popup.
All kudos are going to @RickyC0626. I only rebased with master and added few qunit tests to ensure that this feature works as expected.
Original PR: #10459
* Move new/edit category modals to its own page
* Fix JS tests
* Minor fixes to new-category UI
* Add mobile toggle
* Use global pretender endpoint so plugins can benefit too
* Alignment fix
* Minor review fixes
* Styling refactor
* Move some SCSS out of the modal
Trying to include this attribute when topic_user is nil causes an error when visiting a topic as anon. Additionally, we don't display the slow mode banner for these users.
Showing this button is confusing for sites which are using external authentication. Clicking 'log in' already pops up the login modal, which includes a forgot password link when appropriate.
This PR introduces a feature that will detect a date inside the post that a user is bookmarking, and offer that date as an option in the bookmark modal.
The logic is that we get the first date/time detected in the post. If it does not have a time, just a date, then we default to 8:00am for the time.
This allows for an advanced feature where hitting control on click or
CTRL-SHIFT-ENTER will lead to a post being made but the browser not to
scroll to the end.
Adding a video in composer and then continuing to type into it will make the
video element flicker and restart playback on every keystroke, as the preview
is rendered. In certain configurations, this can lead to some performance
problems too.
Onebox already does the same for external videos.
This gets us closer to how newer Ember versions want to do things, but
with a bit of Discourse flair.
`acceptance` now takes a function as a parameter, and tests need to be
declared in that new function context.
A new helper, `needs`, is passed as a parameter. You can use it to set
up the test the way you want.
* FIX: Ensure slow mode duration is correctly edited and displayed.
This commit fixes a bug where you were forced to set hours, minutes, and seconds or you won't be able to set the slow mode. Also, the duration was not displayed correctly due to the seconds not being truncated.
Additionally, we'll always display the hours, minutes, and seconds inputs for clarity and remove the blue banner.
* Set slow mode modal tweaks.
Uses labels instead of placeholders.
Input fields only visible when custom option selected.
Replace "Custom Duration" with "Pick Duration".
Additionally, place the `Set slow mode` button at the bottom of the topic actions menu.
* Perform the slow_mode validation also on the client-side before saving trying to save the post. This way, the post won't be staged.
This removes fixed positioning from d-header and the topic timeline.
Plugins, themes and components that use the above/below header plugin outlet will likely need some margin/padding adjustments.
This broke "composePrivateMessage" (and possibly others) because `d-button` now passes the event as a
second argument, and that action has an optional second argument.
* FEATURE: CTRL-SHIFT-ENTER and SHIFT-Click do not scroll on post
This allows for an advanced feature where hitting control on click or
CTRL-SHIFT-ENTER will lead to a post being made but the browser not to
scroll to the end.
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
* The creation of a testing div is specific to Rails, so that is
moved back out of setupTests();
* We've removed the `Discourse` globals from the acceptance helpers in favor of
`setApplication`/`getApplication`.
* We pass the container to setupTests because there is no
`__container__` in later Ember versions.
* `App` is now `app` because it's not a constant or class, it's an
instance of an application.
Dependency on gifsicle, allow_animated_avatars and allow_animated_thumbnails
site settings were all removed. Animated GIF images are still allowed, but
the generated optimized images are no longer animated for those (which were
used for avatars and thumbnails).
The added 'animated' is populated by extracting information using FastImage.
This field was used to selectively reoptimize old animations. This process
happens in the background.
Previous to this change we had no protection to ensure we wait on a request
for more posts prior starting another request.
In outlier cases if 10 people post at the same time on a topic a flood of
requests could start.
To improve this situation we now ensure that we are done asking for new posts
prior to asking for the next batch.
Also addresses some style issues raised previously and moves init to top
of class.
* FEATURE: when we fail to ship topic timings attempt to retry
This change amends it so
1. Topic timings are treated as background requests and subject to more
aggressive rate limits.
2. If we notice an error when we ship timings we back off exponentially
The commit allows 405, 429, 500, 501, 502, 503 and 504 errors to be retried.
500+ errors usually happen when self hosters are rebuilding or some other
weird condition.
405 happens when site is in readonly.
429 happens when user is rate limited.
The retry cadence is hardcoded in AJAX_FAILURE_DELAYS, longest delay is
40 seconds, we may consider enlarging it.
After the last delay passes we give up and do not write timings to the
server.
* Address feedback
- Omit promise, no need to use promises in sendNextConsolidatedTiming
- Correct issue where >= -1 was used and > -1 was intended
- Use objects for consolidated timings instead of Array
- Stop using shift/unshift and instead use push / pop which are faster
* Move consolidated timing initialization to constructor
* Remove TODO and just console.warn if we have an issue
* FEATURE: add penalty options for take action
Add the ability to silence or suspend users from the "take action"
button when moderators are flagging posts. This allows for a more streamlined
active moderation workflow, when moderating against a topic directly.
* FEATURE: Add ability to add target to link
This commit will add the ability for a link's target attribute to be specified.
Allowing`target: "_blank"` to work properly.
This commit will add the category slug class to the body if the tag is a child of a category.
Currently, when visiting a tag topic list only the tag name is added to the body class.
Per Google, sites are encouraged to upgrade from `analytics.js` to `gtag.js` for Google Analytics tracking. This commit updates core Discourse to use the new `gtag.js` API Google is asking sites to use. This API has feature parity with `analytics.js` but does not use trackers.
When the server gets overloaded and lots of requests start queuing server
will attempt to shed load by returning 429 errors on background requests.
The client can flag a request as background by setting the header:
`Discourse-Background` to `true`
Out-of-the-box we shed load when the queue time goes above 0.5 seconds.
The only request we shed at the moment is the request to load up a new post
when someone posts to a topic.
We can extend this as we go with a more general pattern on the client.
Previous to this change, rate limiting would "break" the post stream which
would make suggested topics vanish and users would have to scroll the page
to see more posts in the topic.
Server needs this protection for cases where tons of clients are navigated
to a topic and a new post is made. This can lead to a self inflicted denial
of service if enough clients are viewing the topic.
Due to the internal security design of Discourse it is hard for a large
number of clients to share a channel where we would pass the full post body
via the message bus.
It also renames (and deprecates) triggerNewPostInStream to triggerNewPostsInStream
This allows us to load a batch of new posts cleanly, so the controller can
keep track of a backlog
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
We were trying to observe a non-ember object which is undefined
behavior and was leaking to odd bugs. This replaces the `filter` object
with an Ember Object and things seem to work.
I also took the opportunity with this commit to move some test specific
stuff out of `discourse-loader` which is loaded on the front end of the
application. The test module building now happens in the `test_helper`
bundle.
This misses a test because Favcount doesn't exposes a get to the counter.
Also, since this code deals with all possible notifications configs we support:
- favicon notification
- favicon new content
- title notification
- title new content
the code is a bit complicated to follow. We may look into refactoring it when a
good opportunity arises, like if https://w3c.github.io/badging/ setClientBadge() method
gives us a cleaner way to notify users.
We can't use erb in Ember CLI (since it does not have Ruby) so this has
been ported to use our `javascript:update_constants` rake test instead.
Note we don't have to run this every time a notification type as it's
only used by fixtures to fill in some specific types we test against.
This is long overdue. We had a lot of (not linted) code to initialize
our test suite as part of the Ruby `test_helper.js` bundle.
This refactor moves that out to a `setup-tests` module, which imports
all the modules properly, rather than using `require`.
It also removes the global `server` variable which some tests were using
for pretender. Those tests are fixed, and in the case of widget tests,
support for a `pretend()` was added, which mimics our acceptance tests.
One problematic test was removed, which overwrites `/posts` - this could
break tons of other tests depending on order.
The prefixing logic is moved into a `prefixProtocol` function in lib:url.
This commit also renames an incorrectly named test and uses https as default instead of http, in 2020 it's reasonable to think we most likely want https and not http. User can still specify http if required.
This commit is also moving one test to a component test.
A followup to this commit would be to ensure every dropdowns are using a regex instead of the normalize/lowercase system we have now.
The dark-mode-friendly SVG mask for the wizard's background image
introduced in 8fcfb9586c does not work with
CDNs, because CORS restrictions apply to SVG masks.
It would be complicated to modify CDN access origin rules for this one
specific assets, so instead, this PR moves the contents of the SVG file
inside the stylesheet.
These are tricky because `module.exports` is used by nodejs files as a
global, which is OK. But we don't want to allow `module` in JS tests
for qunit without importing it first.
We used many global functions to handle tests when they should be
imported like other libraries in our application. This also gets us
closer to the way Ember CLI prefers our tests to be laid out.
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
Allows site administrators to pick different fonts for headings in the wizard and in their site settings. Also correctly displays the header logos in wizard previews.
allowEmails used to always be set to true and did not use
can_invite_via_email, which checks for enable_local_logins.
It was a problem because on sites with local logins
disabled users were allowed to enter email addresses, but
received a generic error "error inviting that user".
Prior to this fix, weekly could be 8 days and we could have differences between period chooser text and actual results in the chart.
A good followup to this PR would be to add custom date ranges in period-chooser component.
This is where they should be as far as ember is concerned. Note this is
a huge commit and we should be really careful everything continues to
work properly.
You can now create a file in your plugin/theme in the `api-initializers`
directory which has a simpler template than previous initializers.
Example:
```
// api-initializers/my-plugin.js
import { apiInitializer } from "discourse/lib/api";
export default apiInitializer("0.8", api => {
console.log("hello world from api initializer!");
});
```
See https://meta.discourse.org/t/changing-a-users-email/164512 for context.
When admin changes an email for a user, we were incorrectly sending the password reset email to the user's old address. Also the new email does not come into effect until the reset password process is done, so this PR adds some notes to the admin to make this clearer.
Context: https://meta.discourse.org/t/stop-appending-username-to-url-when-badge-system-disabled/164904
Share links for topics and posts have the current username appended to them when the user is logged in.
If badges are disabled, those added usernames are not beneficial since they're only used to track progress towards certain badges.
This PR makes two change.
1. it moves the logic for the share link url to a centralized helper because it's shared in both topic and post models.
2. it stops username params from being added to share links when badges are disabled.
We previously used the "●" Unicode character for this circle. Using Unicode for this means that it's up to the browser / OS to determine how it renders.
This commit changes it to a CSS shape so that we always get the same rendering regardless of the user's browser / OS.
* FIX: allow editing in composer before a category is selected
If the site setting `allow_uncategorized_topics` is disabled, but no site categories have a topic template, the textarea of the composer should be enabled. This allows for a post body to be entered, however the post/topic should not be successfully created until a category is selected.
If `allow_uncategorized_topics` is disabled *and* one or more categories have a topic template, the textarea of the composer should remain disabled until a category is chosen (so that the body of their post isn’t overwritten by the template).
* Avoid recalculating hasTopicTemplates repeatedly
This replaces an invalid `window.scrollTop` occurrence, left over from a
jQuery refactoring. It should fix an undesirable "shake effect" I have
run into in Safari when navigating to a reply in the post stream.
eslint --fix is capable of fix it automatically for you, ensure prettier is run after eslint as eslint --fix could leave the code in an invalid prettier state.
It didn't provide much value to users as it often didn't match the number visible in the topic timeline. That's because `postNumber` is an implementation detail, while the timeline counts only full visible posts (no whispers, topic action notices, etc.)
typographer can change " to ” leading to breakages in parser
At least codify this. Longer term we want to re-prioritize typographer so
it always runs after bbcode parsing.
Previously attributes such as `[test a='a"a' b="a'a"]` were not correctly
handled.
This amends the regex parser to ensure it correctly parses attributes
without breaking incorrectly on the first nested quote
We don't delegate `mouseMove` so this code has not been called in a long
time. It also seems that `screenX`/`screenY`/`lastX`/`lastY` was never
used so they were removed too.
Before this patch, discourse-markdown depended on the modules in its
bundle being defined in a specific order or it wouldn't load properly.
Now, any file in the bundle can export a `priority` const (default 0)
and files will be loaded in order of ascending priority instead. This
allows us to use a bundle packaged in any order we want.
To check if a post contains any embedded media, we look if the "image_sizes" attribute is present in the new post manager arguments.
We want to see one boxed links, but we only store the raw content of the post. To work around this, I extracted the onebox logic from the composer editor into a module.
This commit also:
- deprecate an old way of using actions for future removal
- removes all the hidden/block/... logic, as we just rely on parent being displayed or not
* FEATURE: Diffrentiate between group + individual mentions
This commit adds the necessary code for Discorse core to differentiate between group + individual mentions in the notification user panel and notification page.
It changes the group mention icon from `at` to `users` as well as adds context as to which group was mentioned in the topic.
The current situation could cause a transition on the button to end after/during modal has shown and causing the button to get focus again. Browsers would then refuse to switch focus.
This is a kinda convulted solution, but it's a general purpose solution which doesn't involve changing anything in plugins/themes or core templates.
* REFACTOR: reworks all the search-advanced-options panel
This commit includes the following changes:
- prevents any mutation of external (to the component) values
- get rid of observers
- uses @action
- minor UI tweaks
- dropped the unecessary debounce
- drops all the legacy code for badges/groups which is not being used
- replaces user-selector by user-chooser and improves multi-select to not show `search` if maximum has been reached
Most importantly this refactor should fix multiple bugs due to _update() being called multiple times if searchTerm was empty and other various bugs where some changes in searchTerm was not applied to the sidebar.
This PR removes the user reminder topic timers, because that system has been supplanted and improved by bookmark reminders. The option is removed from the UI and all existing user reminder topic timers are migrated to bookmark reminders.
Migration does this:
* Get all topic_timers with status_type 5 (reminders)
* Gets all bookmarks where the user ID and topic ID match
* Loops through the found topic timers
* If there is no bookmark for the OP of the topic, then we just create a bookmark with a reminder
* If there is a bookmark for the OP of the topic and it does **not** have a reminder set, then just
update it with the topic timer reminder
* If there is a bookmark for the OP of the topic with a reminder then just discard the topic timer
* Cancels all outstanding user reminder topic timers
* **Trashes (not deletes) all user reminder topic timers**
Notes:
* For now I have left the user reminder topic timer job class in place; this is so the jobs can be cancelled in the migration. It and the specs will be deleted in the next PR.
* At a later date I will write a migration to delete all trashed user topic timers. They are not deleted here in case there are data issues and they need to be recovered.
* A future PR will change the UI of the topic timer modal to make it look more like the bookmark modal.
* DEV - versions of JS files written to a JS file to be included by load-script and appended as params to URLs
* Formatting
* Incorporate feedback from PR
* Update filename of public-js-versions
Before this commit, onShow code could be impacted by code happening after the onShow call. This should ensure this code works for example:
```
onShow() {
afterRender(() => {
someInput.focus();
})
}
```
This moves the logic for horizontally placing the topic progress wrapper from the JS component to SCSS. Doing so means it is more easily overridable by themes and plugins.
This also changes the left/right spacing from 1em to 2em for non-mobile screens (it fits better on iPad portrait especially).
Admins can currently add the bookmarks discovery route link
to the homepage interface, but users can't presently select
that as their default home view. This change facilitates that,
adding the option to the existing Default Home Page dropdown on
the User Preferences Interface page.
This commit adds the `!important` declaration to `.hidden` utility/helper class. Without the `!important` declaration, it is not applied correctly across the site.
Incorrect search filters like `in:personalasd` will end up checking the
checkbox for `in:personal` because the regexp used was only doing prefix
matching.
When a category is removed from `auto_watch_category` we are removing
CategoryUser. However, there are still TopicUser with notification level
set to `watching` which was inherited from Category.
We should move them back to `regular` unless they were modified by a user.
After merging this
58fe78bf28 (diff-fed21847d651f6eb2cc76abbd770f5f8)
I noticed that the code I'm removing in this commit is causing text to be truncated a bit early on desktop. So, I'm removing it for now.
This helps us out in a few ways:
1. It lessens our reliance on jQuery
2. It's slightly less code because it omits options we don't use
3. It is one less library to import and put into ES6 modules
didRender will be called each time the widget is rendered
willRerender will be called the second time a widget is rendered to give an opportunity to clean some state before the tree is replaced
* Category Page / Tag Class Additions
These additions add:
-the name of the tag as a css class to discourse tags.
-'pinned' as a css class to pinned topics in the category view
eg repro before:
- visit http://pr-discourse.test/top/weekly?f=foo
- select another period in the period chooser
- f=foo was gone
After this commit it should still be present
This indication covers all cases of network errors, not just "cancelled by user".
The post upload component already has its own handling for user-cancelled uploads, but the generic upload component does not.
Tested by stopping my localhost server right before attempting to upload a file.
The emoji-picker is a specific piece of code as it has very strong performance requirements which are almost not found anywhere else in the app, as a result it was using various hacks to make it work decently even on old browsers.
Following our drop of Internet Explorer, and various new features in Ember and recent browsers we can now take advantage of this to reduce the amount of code needed, this rewrite most importantly does the following:
- use loading="lazy" preventing the full list of emojis to be loaded on opening
- uses InterserctionObserver to find the active section
- limits the use of native event listentes only for hover/click emojis (for performance reason we track click on the whole emoji area and delegate events), everything else is using ember events
- uses popper to position the emoji picker
- no jquery code
- Add a metadata-row class
- Remove wrapper tags from user-card-after-metadata and user-card-before-badges outlets
- Correct max-height for mobile card
Renamed from `private_messages` to `personal_messages` without
deprecation because the `private_messages` advanced search filter never
worked in the first place when it was implemented.
Meta report: https://meta.discourse.org/t/sending-many-requests-for-video-audio-upload-while-editing-post/161487
When typing in the composer we are sending a lot of unnecessary load() requests for the video/audio elements. This line was added months ago before we improved previewing/video thumbnails, which have improved things, so it is no longer required. After removing this line everything still works and no more additional requests are sent.
Meta report: https://meta.discourse.org/t/spurious-permissions-error-after-deleting-last-bookmark/161289
When deleting all bookmarks in their list, users were seeing an "access denied" message instead of the regular no content message. This is because when we were calling loadMore and no further results were returned, we were presuming the null response from the resolved promise meant that there was a permissions error. Fixed this and moved the message into a computed property to show the correct message.
Like "default watching" and "default tracking" categories option now the "regular" categories support is added. It will be useful for sites that are muted by default. The user option will be displayed only if `mute_all_categories_by_default` site setting is enabled.
Enabling the moderators_manage_categories_and_groups site setting will allow moderator users to create/manage groups.
* show New Group form to moderators
* Allow moderators to update groups and read logs, where appropriate
* Rename site setting from create -> manage
* improved tests
* Migration should rename old log entries
* Log group changes, even if those changes mean you can no longer see the group
* Slight reshuffle
* RouteTo /g if they no longer have permissions to view group
* REFACTOR: Get us closer to no `Discourse` constants in tests
* REFACTOR: Remove `Discourse.currentUser`
* REFACTOR: `prioritizeNameInUx` is really a helper and can use context
* REFACTOR: Rename test
* REFACTOR: Remove `Discourse.MarkdownItURL` and use session
* REFACTOR: Remove unused `LetterAvatarVersion`
* REFACTOR: Remove unused `Discourse.ThemeSettings`
* REFACTOR: Remove unused CDN constants
* REFACTOR: The `globalNotice` property doesn't exist anymore
* REFACTOR: Remove `Discourse.__container__` from plugin api
* REFACTOR: Consider `logout()` a helper and remove container.
Themes can now declare custom colors that get compiled in core's color definitions stylesheet, thus allowing themes to better support dark/light color schemes.
For example, if you need your theme to use tertiary for an element in a light color scheme and quaternary in a dark scheme, you can add the following SCSS to your theme's `color_definitions.scss` file:
```
:root {
--mytheme-tertiary-or-quaternary: #{dark-light-choose($tertiary, $quaternary)};
}
```
And then use the `--mytheme-tertiary-or-quaternary` variable as the color property of that element. You can also use this file to add color variables that use SCSS color transformation functions (lighten, darken, saturate, etc.) without compromising your theme's compatibility with different color schemes.
It turns out that `setupController` doesn't always wait when returning a
promise, but the `model` hook does. This fixes issues with the
`page:changed` event firing before the transition has complete.
Moving the bookmark list into its own component to solve click binding issues for external links, because controllers are not the place for DOM manipulation!
This improves the reloading workaround in a few ways:
- Multiple videos in posts are now reloaded. Previously only the first was reloaded.
- An empty `poster` string is treated the same as a missing attribute
- If the video is set to autoplay, it will be reloaded (and therefore autoplayed correctly)
Carry over the regime used in the Login modal to Create Account to
facilitate overriding of the classes set for the d-modal Component
using a new Computed Property having the same naming convention.
Fixes a bug in `controllers/insert-hyperlink` where `addEventListener` was called with different (anonymous) functions than the matching `removeEventListener` calls.
For sites that are configured to mute some or all categories and tags
for users by default, groups can now be configured to set members'
notification level to normal from the group manage UI.
If there's already a `LockOn` instance, clear its lock before creating creating a new one. Fixes a shaky viewport effect after certain transitions.
Includes:
* Slight refactor (elementId wasn't an id, but a selector - it included the "#" prefix)
* Add support for a[name=X] anchors in `jumpToPost`
* Scope down anchors to the #main element (Embeded fontawesome sprites are causing conflicts, e.g. when given `bed` anchor, `<a name="bed">` was at odds with `<symbol id="bed" viewBox="0 0 640 512">(…)</symbol>`)
* REFACTOR: `refreshSort` doesn't cause it to sort again, it's misleading
* FIX: Move queryParams to each discovery controller rather than shared
This fixes issues where params previously would not reset between
routes. For example if you added `max_posts=1` to /latest and then went
to a category.
* Add backward compatibility for (action "changeSort") for themes
* FIX: refreshing was not working
* Update app/assets/javascripts/discourse/app/controllers/discovery/topics.js
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
When visiting a permalink with an anchor (e.g. /important-link#notes) the anchor part was being dropped during redirection.
The change doesn't have a test. Functions like scrollToPost or scrollToElement don't have any effect in the test environment.
Mostly de-jQuery-ification. This refactor tries to closely preserve the original behavior.
Changes:
* Store the interval inside the class (allows using `clearLock()` on `LockOn` objects)
* Extract the interval function to a separate method
* Math.max result is never undefined (per MDN: "[Return value] The largest of the given numbers. If at least one of the arguments cannot be converted to a number, NaN is returned.")
* Replace jQuery's `offset()`
* Private methods be private
* Native `scrollTop` (jQuery's just a wrapper for this)
* `addEventListener`/`removeEventListener`
The controller method `_changeFilters` is now changed to `changeFilters` in the commit 1fc58b5a4e. But it was not modified in the `admin-tools` service script.
We trigger `/topics/timings` requests without ever caring about the
promise afterwards, so they can bleed from one test to another.
If you're very unlucky, this might happen and then the next test
is testing a subfolder, which means you end up with a path like
`/forum/topics/timings` which is not caught by pretender and causes the
suite to fail.
It's easier (and faster) to never send these requests in test mode
than to track the ajax requests and abort them between runs.