When a group only has SMTP enabled and not IMAP, we do not
want to enqueue the :group_smtp_email job because using the group's
SMTP credentials for sending user_private_message emails is
handled by the UserNotifications class.
We do not want the :group_smtp_email job to be enqueued because
that uses a reply key instead of the group.email_username
for the reply-to address which is not what we want for SMTP
only, and also creates an IncomingEmail record to prevent IMAP
double syncing which we do not need either.
There is an open question about what happens when IMAP is
enabled after SMTP has been enabled for a while, and also questions
around whether we could do away with :group_smtp_email altogether
and handle everything via EmailLog and UserNotifications, adding
additional columns to the former and modifying the Imap::Sync
class to take this into account...a lot more further testing
for IMAP needs to be done to answer those questions.
For now, this fix should be sufficient to get the correct
reply-to address for user_private_response messages sent in
response to emails sent directly to the group's
email_username SMTP address.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
Previously we would retry push notifications indefinitely for all errors
except for ExpiredSubscription
Under certain conditions other persistent errors may arise such as a persistent
rate limit.
If we track more than 3 errors in a period of time longer than a day we will
delete the subscription
Also performs a bit of internal cleanup to ensure protected methods really
are private.
This PR improves the UI of bulk select so that its context is applied to the Dismiss Unread and Dismiss New buttons. Regular users (not just staff) are now able to use topic bulk selection on the /new and /unread routes to perform these dismiss actions more selectively.
For Dismiss Unread, there is a new count in the text of the button and in the modal when one or more topic is selected with the bulk select checkboxes.
For Dismiss New, there is a count in the button text, and we have added functionality to the server side to accept an array of topic ids to dismiss new for, instead of always having to dismiss all new, the same as the bulk dismiss unread functionality. To clean things up, the `DismissTopics` service has been rolled into the `TopicsBulkAction` service.
We now also show the top Dismiss/Dismiss New button based on whether the bottom one is in the viewport, not just based on the topic count.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
We have a few places in the code where we need to validate various email related settings, and will have another soon with the improved group email settings UI. This PR introduces a class which can validate POP3, IMAP, and SMTP credentials and also provide a friendly error message for issues if they must be presented to an end user.
This PR does not change any existing code to use the new service. I have added a TODO to change POP3 validation and the email test rake task to use the new validator post-release.
* FIX: Link notification to first unread post
If a topic with a few posts was posted in a watched category or with a
watched tag, the created notification would always point to the last
post, instead of pointing to the first one.
The root cause is that the query that fetched the first unread post
uses 'TopicUser' records and those are not created by default for
user watching a category or tag. In this case, it should use the
'CategoryUser' or 'TagUser' records.
* DEV: Use named bind variables
When the admin creates a new custom field they can specify if that field should be searchable or not.
That setting is taken into consideration for quick search results.
This PR adds a new category setting which is a column in the `categories` table, `allow_unlimited_owner_edits_on_first_post`.
What this does is:
* Inside the `can_edit_post?` method of `PostGuardian`, if the current user editing a post is the owner of the post, it is the first post, and the topic's category has `allow_unlimited_owner_edits_on_first_post`, then we bypass the check for `LimitedEdit#edit_time_limit_expired?` on that post.
* Also, similar to wiki topics, in `PostActionNotifier#after_create_post_revision` we send a notification to all users watching a topic when the OP is edited in a topic with the category setting `allow_unlimited_owner_edits_on_first_post` enabled.
This is useful for forums where there is a Marketplace or similar category, where topics are created and then updated indefinitely by the OP rather than the OP making new topics or additional replies. In a way this acts similar to a wiki that only one person can edit.
Mailing list mode can generate significant email volume, especially on sites with a large user base. Disable mailing list mode via site settings by default so sites don't experience an unexpectedly large cost from outgoing email.
The urls that we generate for mobile post notifications don't take into
account the subfolder url if a site happens to have one configured. When
this happens when you tap on a new mobile notification it takes you to
a url that doesn't work because it is missing the subfolder portion.
I honestly think this should be handled in the Post model like we do
with the Topic model. `Post.url` should know how to handle subfolder
installs, but that seemed like a very risky change because there are
lots of other places in the codebase where we tack on the base_path and
I didn't want to risk duplicating it.
I also found a small typo in the topics controller spec.
We were sending 2 emails for user silencing if a message was provided in the UI. Also always send email for user silence and user suspend with reason regardless of whether message provided.
Previously we were checking truthiness in some places, and `== true` in
others. That can lead to some inconsistent UX where the interface says
the email is valid, but account creation fails.
This commit ensures values are boolean when set, and raises an error for
other value types.
If this safety check is triggered, it means the specific auth provider
needs to be updated to pass booleans.
The bug was mentioned on meta: https://meta.discourse.org/t/pressing-dismiss-new-doesnt-clear-new-topics/179858
Problem is that sometimes the user has TopicUser records with `last_read_post_number` set as NULL. In that case, the topic is still "new" to them and should be dismissed when they click dismiss button.
In addition, I added that condition to post_migration and bumped the number to fix existing records. Migration is written to be idempotent so it will make no harm to already deployed instances.
Previously when inheriting category auto-close settings for a topic, those settings were disrupted if another topic timer was assigned or if a topic was closed then manually re-opened.
This PR makes it so that when a topic is manually re-opened the topic auto-close settings are inherited from the category. However, they will now be based on the topic created_at date. As an example, for a topic with a category auto close hours setting of 72 (3 days):
* Topic was created on 2021-02-15 08:00
* Topic was closed on 2021-02-16 10:00
* Topic was opened again on 2021-02-17 06:00
Now, the topic will inherit the auto close timer again and will close automatically at **2021-02-18 08:00**, which is based on the creation date. If the current date and time is greater than the original auto-close time (e.g. we were at 2021-02-20 13:45) then no auto-close timer is created.
Note, this will not happen if the topic category auto-close setting is "based on last post".
Original PR was reverted because of broken migration https://github.com/discourse/discourse/pull/12058
I fixed it by adding this line
```
AND topics.id IN(SELECT id FROM topics ORDER BY created_at DESC LIMIT :max_new_topics)
```
This time it is left joining a limited amount of topics. I tested it on few databases and it worked quite smooth
Follow up https://github.com/discourse/discourse/pull/11968
Dismiss all new topics using the same DismissTopicService. In addition, MessageBus receives exact topic ids which should be marked as `seen`.
* FEATURE: Ability to dismiss new topics in a specific tag
Follow up of https://github.com/discourse/discourse/pull/11927
Using the same mechanism to disable new topics in a tag.
* FIX: respect when category and tag is selected
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
There was an issue that occurred with this order of operations:
* An IMAP topic was created by emailing a group
* A second user was invited to the topic (not the OP and not the group)
* A user with access to the group replies to the topic
* The second user receives a user_private_message notification email because of their involvement in the topic
* The second user replies to the email via email
This new reply would then go and notify the other group PM users, except for those who emailed the group topic directly, which is handled via the group SMTP mailer. However because the new post already has an incoming email because it is parsed via the Email::Receiver via POP3 the group SMTP section of the post alerter is skipped, and the group's email address is not ignored for the user_private_message notification.
This PR fixes it so the group is not ever sent an email via the PM notification. This is important because any new emails in the group's IMAP inbox will be picked up by the Imap::Sync code and created as a new topic which is not at all desirable.
Also in this PR I split up the specs a bit more for group SMTP in the post alerter to make them easier to read and they each only test one thing.
Fixes bug introduced by bd25627198
What happens is we send notifications to everyone involved in the group inbox topic about new posts, however we pass the param `skip_send_email_to: email_addresses`. In the above commit I removed the group email address from this `email_addresses` array. This breaks the IMAP inbox because we email the group with the reply, and the IMAP sync tool finds this email and opens a new unrelated topic with it.
This PR fixes a race condition with the IMAP notification code. In the `Email::Receiver` we call the `NewPostManager` to create the post and enqueue jobs and sends alerts via `PostAlerter`. However, if the post alerter reaches the `notify_pm_users` and the `group_notifying_via_smtp` method _before_ the incoming email is updated with the post and topic, we unnecessarily send a notification to the person who just posted. The result of this is that the IMAP syncer re-imports the email sent to the user about their own post, which looks like this in the group inbox:
To fix this, we skip the jobs enqueued by `NewPostManager` and only enqueue them with `PostJobsEnqueuer` manually _after_ the incoming email record has been updated with the post and topic.
Other improvements:
* Moved code to calculate email addresses from `IncomingEmail` records into the topic, with a group passed in, for easier testing and debugging. It is not the responsibility of the post alerter to figure this stuff out.
* Add shortcut methods on `IncomingEmail` to split or provide an empty array for to and cc addresses to avoid repetition.
It used to insert block Oneboxes inside paragraphs which resulted in
invalid HTML. This needed an additional parsing for removal of empty
paragraphs and the resulting HTML could still be invalid.
This commit ensure that block Oneboxes are inserted correctly, by
splitting the paragraph containing the link and putting the block
between the two. Paragraphs left with nothing but whitespaces will
be removed.
Follow up to 7f3a30d79f.
This commit adds an additional find_user_by_email hook to ManagedAuthenticator so that GitHub login can continue to support secondary email addresses
The github_user_infos table will be dropped in a follow-up commit.
This is the last core authenticator to be migrated to ManagedAuthenticator 🎉
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
Now that we have support for user-selectable color schemes, it makes sense
to simplify seeding and theme updates in the wizard.
We now:
- seed only one theme, named "Default" (previously "Light")
- seed a user-selectable Dark color scheme
- rename the "Themes" wizard step to "Colors"
- update the default theme's color scheme if a default is set
(a new theme is created if there is no default)
Previously, any errors in those files would e.g. blow up the update process in docker_manager.
Now it prints out an error and proceeds as if there was no compatibility file.
Includes:
* DEV: Extract setup_git_repo
* DEV: Use `Dir.mktmpdir`
* DEV: Default to `main` branch (The latest versions of git already do this, so to avoid problems do this by default)
* PERF: avoid lookbehinds when indexing search
Previously we used a `EmailCook.url_regexp` this regex used lookbehinds
Unfortunately certain strings could lead to pathological behavior causing
CPU to skyrocket and regex replace to take a very very long time.
EmailCook still needs a fix, but it is less urgent cause it already splits
to single lines. That said we will correct that as well in a seperate PR.
New implementation is far more naive and relies on the extra spaces search
indexer inserts.
Extracted commonly used spec helpers into spec/support/uploads_helpers.rb, removed unused stubs and let definitions. Makes it easier to write new S3-related specs without copy and pasting setup steps from other specs.
The NewUserOfTheMonth badge is part of the Badges::GettingStarted group. This group is skipped in BadgeGranter if the user skips the new user tips. However, the NewUserOfTheMonth badge granter job does not account for this. Instead, it notifies the user they've received the badge even if they did not.
This commit introduces a simple fix to allow granting of this badge even to users who skipped the new user tips.
Overall stubs lead to long term instability, this helps stabilize them.
Also fixed flaky spec around plugin hooks.
It was relying you `.posts` on system_user which could be loaded already
and invalid. Instead we now load it by hand.
DEV: add plugin hooks for silence message parameters
Allows plugins to add, and update extra silence message params for custom
i18n vars
Allows plugins to override system messages via `message_title` and
`message_raw` parameters. We can later expose these params where necessary via event
hooks. Expose the parameter for the on user_silenced trigger.
* FIX: Unlike own posts on ownership transfer
If a user has liked a post that has passed the
`post_undo_action_window_mins` system setting window and you transfer ownership
of that post to that user you will be the owner of a post that you have
liked, but cannot unlike resulting in a weird UI behavior. This commit
fixes this issue.
The existing tests didn't check for the timeout window for unliking
posts so I added that in.
I couldn't find a good way to do this logic inside of the guardian class
so rather than duplicating behavior of the `PostActionDestroyer` class
inside of the `PostOwnerChanger` I decided to pass in a "bypass"
variable that could be used to check if the calling class is the
'post_owner_changer' and bypass the guardian instead. I went this route
because the guardian `can_delete_post_action` method has no way of
distinguishing how to allow a user to be able to unlike their own posts
after the timeout window but only on a post owner change.
* use an options hash instead
* FEATURE: don't notify about changed tags for a private message
Only staff members observing specific tag should receive a notification
* FIX: remove other category which is not used
* FIX: improved specs to ensure that revise was succesful
In the near future, we will be swtiching to PG headlines to generate the
search blurb. As such, we need to replace audio and video links in the
raw data used for headline generation. This also means that we avoid
replacing links each time we need to generate the blurb.
We do prefix matching in search so there is no need to inject the extra
terms.
Before:
```
"'discourse':10,11 'discourse.org':10,11 'org':10,11 'test':8A,10,11 'test.discourse.org':10,11 'titl':4A 'uncategor':9B"
```
After:
```
"'discourse.org':10,11 'org':10,11 'test':8A 'test.discourse.org':10,11 'titl':4A 'uncategor':9B"
```
Indexing query strings in URLS produces inconsistent results in PG and
pollutes the search data for really little gain.
The following seems to work as expected...
```
discourse_development=# SELECT TO_TSVECTOR('https://www.discourse.org?test=2&test2=3');
to_tsvector
------------------------------------------------------
'2':3 '3':5 'test':2 'test2':4 'www.discourse.org':1
```
However, once a path is present
```
discourse_development=# SELECT TO_TSVECTOR('https://www.discourse.org/latest?test=2&test2=3');
to_tsvector
----------------------------------------------------------------------------------------------
'/latest?test=2&test2=3':3 'www.discourse.org':2 'www.discourse.org/latest?test=2&test2=3':1
```
The lexeme contains both the path and the query string.
```
discourse_development=# SELECT alias, lexemes FROM TS_DEBUG('www.discourse.org');
alias | lexemes
-------+---------------------
host | {www.discourse.org}
discourse_development=# SELECT TO_TSVECTOR('www.discourse.org');
to_tsvector
-----------------------
'www.discourse.org':1
```
Given the above lexeme, we will inject additional lexeme by splitting
the host on `.`. The actual tsvector stored will look something like
```
tsvector
---------------------------------------
'discourse':1 'discourse.org':1 'org':1 'www':1 'www.discourse.org':1
```
This is causing issues when purging old users, if they are set up in the
exact condition where they will be demoted into another group, but also
do not have a primary email.
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
* PERF: Dematerialize topic_reply_count
It's only ever used for trust level promotions that run daily, or compared to 0. We don't need to track it on every post creation.
* UX: Add symbol in TL3 report if topic reply count is capped
* DEV: Drop user_stats.topic_reply_count column
This ensures that at a minimum you are notified once a day of
repeat edits by the same user.
Long term we may consider winding this down to say 1 hour or
making it configurable.
Due to a refactor in e90f9e5cc4 we stopped notifying on edits if
a user liked a post and then edited.
The like could have happened a long time ago so this gets extra
confusing.
This change makes the suppression more deliberate. We only want
to suppress quite/link/mention if the user already got a reply
notification.
We can expand this suppression if it is not enough.
It's possible to cause a 500 error by putting in weird characters in the
input field for updating a users website on their profile.
Normal invalid input like not including the domain extension is already
handled by the user_profile model validation. This fix ensures a server
error doesn't occur for weird input characters.
It previously failed to match URLs with characters other than `[a-zA-z0-9\.\/:-]`. This meant that `PullHotlinkedImages` would sometimes download an external image and then never use it in any posts.
* FIX: FlagSockpuppets should not flag a post if a post of that user was already rejected by staff
* Update spec/services/flag_sockpuppets_spec.rb
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
Co-authored-by: Robin Ward <robin.ward@gmail.com>
This fix ensures that if a staged user is linked to or quoted they won't
be emailed about it.
A staged user could email into a category, and another user could quote
them inside of a completely different category and we don't want a
staged user to receive an email for this.
Bug report:
https://meta.discourse.org/t/-/145202/9
For example given a custom badge with SQL:
```
SELECT 1
-- I am a comment
```
You end up with
```
FROM (SELECT 1
-- I am a comment) q
```
This fix adds newlines so you end up with the now-valid:
```
FROM (
SELECT 1
-- I am a comment
) q
```
New `duration` attribute is introduced for the `set_or_create_timer` method in the commit aad12822b7 for "based on last post" and "auto delete replies" topic timers.
* This PR implements the scheduling and notification system for bookmark reminders. Every 5 minutes a schedule runs to check any reminders that need to be sent before now, limited to **300** reminders at a time. Any leftover reminders will be sent in the next run. This is to avoid having to deal with fickle sidekiq and reminders in the far-flung future, which would necessitate having a background job anyway to clean up any missing `enqueue_at` reminders.
* If a reminder is sent its `reminder_at` time is cleared and the `reminder_last_sent_at` time is filled in. Notifications are only user-level notifications for now.
* All JavaScript and frontend code related to displaying the bookmark reminder notification is contained here. The reminder functionality is now re-enabled in the bookmark modal as well.
* This PR also implements the "Remind me next time I am at my desktop" bookmark reminder functionality. When the user is on a mobile device they are able to select this option. When they choose this option we set a key in Redis saying they have a pending at desktop reminder. The next time they change devices we check if the new device is desktop, and if it is we send reminders using a DistributedMutex. There is also a job to ensure consistency of these reminders in Redis (in case Redis drops the ball) and the at desktop reminders expire after 20 days.
* Also in this PR is a fix to delete all Bookmarks for a user via `UserDestroyer`
* FIX: when unread reply notification exists don't create new
From time to time, the user is creating a reply post and then they want to add additional details. They edit an existing post and for example, add a quote from a previous one.
In that situation, if the user to whom reply was directed to already have the unread notification, we should not create the new one.
That behaviour was mentioned here: https://meta.discourse.org/t/reply-then-edit-to-add-quote-notification-redundancy/138358
* FIX: dont create new notification if already exists
The commit: 75069ff179
allows users to remove their primary group, but this introduced a bug
where if you were to edit any other profile info like location or
website which is a form on a separate page then the flair dropdown,
would cause the selected flair to be removed.
This fix ensures that if the `primary_group_id` parameter is missing
from the update payload it does not remove the existing
`primary_group_id`. It will only remove the `primary_group_id` if it is
present in the payload and empty.
This is not used in core or official plugins, and has been printing a deprecation notice since v2.3.0beta4. All OpenID 2.0 code and dependencies have been dropped. The user_open_ids table remains for now, in case anyone has missed the deprecation notice, and needs to migrate their data.
Context at https://meta.discourse.org/t/-/113249
* FEATURE: Replace existing badge owners when using the bulk award feature
* Use ActiveRecord to sanitize title update query, Change replace checkbox text
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
Co-authored-by: Robin Ward <robin.ward@gmail.com>
group membership and `CategoryUser` notification level should be
respected to determine whether to notify staged users about activity in
private categories, instead of only ever generating notifications for staged
users' own topics (which has been the behaviour since
0c4ac2a7bc)
Let's say post #2 quotes post number #1. If a user decides to quote the
quote in post #2, it should keep the information of post #1
("user_1, post: 1, topic: X"), instead of replacing with current post
info ("user_2, post: 2, topic: X").
This fix allows a user to remove their currently assigned primary group
if the Site Setting `user selected primary groups` is enabled.
Before this fix, if a user selected "none" for their primary group it
would silently fail and never be updated.
This is required for people using apps with custom protocols. We still verify the entire URL (including protocol) against the site setting value.
Refactored wildcard_url_checker so that it always returns a boolean, rather than sometimes returning a regex match.
* FEATURE: Ability to add components to all themes
This is the first and functional step from that topic https://dev.discourse.org/t/adding-a-theme-component-is-too-much-work/15398/16
The idea here is that when a new component is added, the user can easily assign it to all themes (parents).
To achieve that, I needed to change a site-setting component to accept `setDefaultValues` action and `setDefaultValuesLabel` translated label.
Also, I needed to add `allowAny` option to disable that for theme selector.
I also refactored backend to accept both parent and child ids with one method to avoid duplication (Renamed `add_child_theme!` to more general `add_relative_theme!`)
* FIX: Improvement after code review
* FIX: Improvement after code review2
* FIX: use mapBy and filterBy directly
Previously people were not consistent about mocking which left internals in
a fragile state when running subfolder specs.
This introduces a simple helper `set_subfolder` which you can use to set
the subfolder for the spec. It takes care of proper configuration of subfolder
and teardown.
```
# usage
set_subfolder "/my_amazing_subfolder"
```
You should no longer stub base_uri or global_settings
* Fix user title logic when badge name customized
* Fix an issue where a user's title was not considered a badge granted title when the user used a badge for their title and the badge name was customized. this affected the effectiveness of revoke_ungranted_titles! which only operates on badge_granted_titles.
* When a user's title is set now it is considered a badge_granted_title if the badge name OR the badge custom name from TranslationOverride is the same as the title
* When a user's badge is revoked we now also revoke their title if the user's title matches the badge name OR the badge custom name from TranslationOverride
* Add a user history log when the title is revoked to remove confusion about why titles are revoked
* Add granted_title_badge_id to user_profile, now when we set badge_granted_title on a user profile when updating a user's title based on a badge, we also remember which badge matched the title
* When badge name (or custom text) changes update titles of users in a background job
* When the name of a badge changes, or in the case of system badges when their custom translation text changes, then we need to update the title of all corresponding users who have a badge_granted_title and matching granted_title_badge_id. In the case of system badges we need to first get the proper badge ID based on the translation key e.g. badges.regular.name
* Add migration to backfill all granted_title_badge_ids for both normal badge name titles and titles using custom badge text.
Issue was mentioned in this [meta topic](https://meta.discourse.org/t/send-a-notification-to-watching-users-when-adding-tag/125314)
It is working well when category is changed because NotifyCategoryChange job already got that code:
```
if post&.topic&.visible?
post_alerter = PostAlerter.new
post_alerter.notify_post_users(post, User.where(id: args[:notified_user_ids]))
post_alerter.notify_first_post_watchers(post, post_alerter.category_watchers(post.topic))
end
```
For NotifyTagChange job notify post users were missing so it worked only when your notification was set to `watching first post`
- Allow revoking keys without deleting them
- Auto-revoke keys after a period of no use (default 6 months)
- Allow multiple keys per user
- Allow attaching a description to each key, for easier auditing
- Log changes to keys in the staff action log
- Move all key management to one place, and improve the UI
This is a major change to draft internals. Previously there were quite a
few cases where the draft system would say "draft saved", when in fact
we just skipped saving.
This commit ensures the draft system deals with draft ownership handover in
a predictable way.
For example:
- Window 1 editing draft
- Window 2 editing same draft at the same time
Previously we would allow window 1 and 2 to just fight on the same draft
each window overwriting the same draft over an over.
This commit introduces an ownership concept where either window 1 or 2 win
and user is prompted on the loser window to reload screen to correct the issue
This also corrects edge cases where a user could have multiple browser windows
open and posts in 1 window, later to post in the second window. Previously
drafts would break in the second window, this corrects it.
* FEATURE: Site setting/ui to allow users to set their primary group
* prettier and remove logic from account template
* added 1 to 43 to make web_hook_user_serializer_spec pass
Doing .pluck(:column).first is a very common pattern in Discourse and in
most cases, a limit cause isn't being added. Instead of adding a limit
clause to all these callsites, this commit adds two new methods to
ActiveRecord::Relation:
pluck_first, equivalent to limit(1).pluck(*columns).first
and pluck_first! which, like other finder methods, raises an exception
when no record is found
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
- Client-side censoring fixed for non-chrome browsers. (Regular expression rewritten to avoid lookback)
- Regex generation is now done on the server, to reduce repeated logic, and make it easier to extend in plugins
- Censor tests are moved to ruby, to ensure everything works end-to-end
- If "watched words regular expressions" is enabled, warn the admin when the generated regex is invalid
* REFACTOR: Rename SiteSetting.disable_edit_notifications to disable_system_edit_notifications
- The older name could cause some confusion because the setting does not disable all edit notifications, only system ones.
* FIX: Add frozen_string_literal: true in the migration
* DEV: Deprecate 'disable_edit_notifications'
This feature adds the ability to customize the HTML part of all emails using a custom HTML template and optionally some CSS to style it. The CSS will be parsed and converted into inline styles because CSS is poorly supported by email clients. When writing the custom HTML and CSS, be aware of what email clients support. Keep customizations very simple.
Customizations can be added and edited in Admin > Customize > Email Style.
Since the summary email is already heavily styled, there is a setting to disable custom styles for summary emails called "apply custom styles to digest" found in Admin > Settings > Email.
As part of this work, RTL locales are now rendered correctly for all emails.
This commit contains 3 features:
- FEATURE: Allow downloading watched words
This introduces a button that allows admins to download watched words per action in a `.txt` file.
- FEATURE: Allow clearing watched words in bulk
This adds a "Clear All" button that clears all deleted words per action (e.g. block, flag etc.)
- FEATURE: List all blocked words contained in the post when it's blocked
When a post is rejected because it contains one or more blocked words, the error message now lists all the blocked words contained in the post.
-------
This also changes the format of the file for importing watched words from `.csv` to `.txt` so it becomes inconsistent with the extension of the file when watched words are exported.
Created a rake task for destroying multiple categories along with any
subcategories and topics the belong to those categories.
Also created a rake task for listing all of your categories.
Refactored existing destroy rake tasks to use new logging method, that
allows for puts output in the console but prevents it from showing in
the specs.
Context: https://meta.discourse.org/t/121589
This new setting option lets group owners message/mention large groups
without granting that privilege to all members.
This can cause unbound CPU usage in some cases, and excessive logging in other cases. This commit moves redis readonly information into the local process, but maintains the DistributedCache for postgres readonly state.
The site settings beginning with "topic views heat" and "topic post like
heat" are set to defaults when installing Discourse, but there has not
been a process or guidance for updating these values based on
community activity.
This feature will update them once a month. The low, medium, and
high settings will be based on the minimums of the 45th, 25th, and
10th percentile topics respectively, so that 45% of topics will have
some "heat".
Disable automatic changes with the automatic_topic_heat_values setting.
Previous to this fix is a post had the test www.test.com/abc it would fail
to index.
This also simplifies the rules to avoid full url parsing which can be
expensive
Previously we used custom fields to denote a user was anonymous, this was
risky in that custom fields are prone to race conditions and are not
properly dedicated, missing constraints and so on.
The new table `anonymous_users` is properly protected. There is only one
possible shadow account per user, which is enforced using a constraint.
Every anonymous user will have a unique row in the new table.
* Introduced fab!, a helper that creates database state for a group
It's almost identical to let_it_be, except:
1. It creates a new object for each test by default,
2. You can disable it using PREFABRICATION=0
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
This change both speeds up specs (less strings to allocate) and helps catch
cases where methods in Discourse are mutating inputs.
Overall we will be migrating everything to use #frozen_string_literal: true
it will take a while, but this is the first and safest move in this direction
This commit fixes the follow quality issue with `PostSearchData#raw_data`:
1. URLs are being tokenized and links with similar href and characters
are being duplicated in the raw data.
`Post#cooked`:
```
<p><a href=\"https://meta.discourse.org/some.png\" class=\"onebox\" target=\"_blank\" rel=\"nofollow noopener\">https://meta.discourse.org/some.png</a></p>
```
`PostSearchData#raw_data` Before:
```
This is a test topic 0 Uncategorized https://meta.discourse.org/some.png discourse org/some png https://meta.discourse.org/some.png discourse org/some png
```
`PostSearchData#raw_data` After:
```
This is a test topic 0 Uncategorized https://meta.discourse.org/some.png meta discourse org
```
2. Ligthbox being included in search pollutes the
`PostSearchData#raw_data` unncessarily.
From 28 March 2018 to 28 March 2019, searches for the term `image` on
`meta.discourse.org` had a click through rate of 2.1%. Non-lightboxed images are not included in indexing for search yet we were indexing content within a lightbox. Also, search for terms like `image` was affected we were using `Pasted image` as the filename for
uploads that were pasted.
`Post#cooked`
```
<p>Let me see how I can fix this image<br>\n<div class=\"lightbox-wrapper\"><a class=\"lightbox\" href=\"https://meta.discourse.org/some.png\" title=\"some.png\" rel=\"nofollow noopener\"><img src=\"https://meta.discourse.org/some.png\" width=\"275\" height=\"299\"><div class=\"meta\">\n<svg class=\"fa d-icon d-icon-far-image svg-icon\" aria-hidden=\"true\"><use xlink:href=\"#far-image\"></use></svg><span class=\"filename\">some.png</span><span class=\"informations\">1750×2000</span><svg class=\"fa d-icon d-icon-discourse-expand svg-icon\" aria-hidden=\"true\"><use xlink:href=\"#discourse-expand\"></use></svg>\n</div></a></div></p>
```
`PostSearchData#raw_data` Before:
```
This is a test topic 0 Uncategorized Let me see how I can fix this image some.png png https://meta.discourse.org/some.png discourse org/some png some.png png 1750×2000
```
`PostSearchData#raw_data` After:
```
This is a test topic 0 Uncategorized Let me see how I can fix this image
```
In terms of indexing performance, we now have to parse the given HTML
through nokogiri twice. However performance is not a huge worry here since a string length of 194170 takes only 30ms
to scrub plus the indexing takes place in a background job.
Includes support for flags, reviewable users and queued posts, with REST API
backwards compatibility.
Co-Authored-By: romanrizzi <romanalejandro@gmail.com>
Co-Authored-By: jjaffeux <j.jaffeux@gmail.com>
* This is causing certain posts to appear in searches incorrectly as `PostSearchData#raw_data` contains the outdated title, category name and tag names.
Migrates email user options to a new data structure, where `email_always`, `email_direct` and `email_private_messages` are replace by
* `email_messages_level`, with options: `always`, `only_when_away` and `never` (defaults to `always`)
* `email_level`, with options: `always`, `only_when_away` and `never` (defaults to `only_when_away`)
It is not a setting, and only relevant in specs. The new API is:
```
Jobs.run_later! # jobs will be thrown on the queue
Jobs.run_immediately! # jobs will run right away, avoid the queue
```
Previously if you wanted to have jobs execute in test mode, you'd have
to do `SiteSetting.queue_jobs = false`, because the opposite of queue
is to execute.
I found this very confusing, so I created a test helper called
`run_jobs_synchronously!` which is much more clear about what it does.
* FEATURE: Account for `ignored_users` when merging two users
## Why?
This is part of the [Ability to ignore a user feature](https://meta.discourse.org/t/ability-to-ignore-a-user/110254/8).
When we merge two users, we need to account for merging their list of `ignored_users` too.
Previously it would unhide their post but leave them silenced.
This fix also cleans up some of the helper classes to make it easier
to pass extra data to the silencing code (for example, a link to the
post that caused the user to be silenced.)
This patch also refactors the auto_silence specs to avoid using
stubs.
