The previous Discourse.cache usage was different to how other theme-related caching is handled, and also requires reaching out to redis every time. The common theme cache is held in memory (as a DistributedCache)
This commit makes sure that the email log's bounce_error_code
conforms to the SMTP error code RFC on save, so that
it is always in the format X.X.X or XXX without any
additional string details. Also included is a migration
to fix this issue for past records.
Similar site settings exist for likes and edits and the new ones work
in a similar way.
By default, users below TL2 have a limit of 20, the limit is increased
by 1.5 for TL2 users up to 30, by 2 for TL3 users up to 40 and by 3 for
TL4 users up to 60.
We validate the *format* of email addresses in many places with a match against
a regex, often with very slightly different syntax.
Adding a separate EmailAddressValidator simplifies the code in a few spots and
feels cleaner.
Deprecated the old location in case someone is using it in a plugin.
No functionality change is in this commit.
Note: the regex used at the moment does not support using address literals, e.g.:
* localpart@[192.168.0.1]
* localpart@[2001:db8::1]
Themes often cache `nil` values in a DistributedCache. This bug meant that we were re-calculating some values on every request, AND triggering message-bus publishing on every request.
This fix should provide a significant performance improvement for busy sites.
2FA support in Discourse was added and grown gradually over the years: we first
added support for TOTP for logins, then we implemented backup codes, and last
but not least, security keys. 2FA usage was initially limited to logging in,
but it has been expanded and we now require 2FA for risky actions such as
adding a new admin to the site.
As a result of this gradual growth of the 2FA system, technical debt has
accumulated to the point where it has become difficult to require 2FA for more
actions. We now have 5 different 2FA UI implementations and each one has to
support all 3 2FA methods (TOTP, backup codes, and security keys) which makes
it difficult to maintain a consistent UX for these different implementations.
Moreover, there is a lot of repeated logic in the server-side code behind these
5 UI implementations which hinders maintainability even more.
This commit is the first step towards repaying the technical debt: it builds a
system that centralizes as much as possible of the 2FA server-side logic and
UI. The 2 main components of this system are:
1. A dedicated page for 2FA with support for all 3 methods.
2. A reusable server-side class that centralizes the 2FA logic (the
`SecondFactor::AuthManager` class).
From a top-level view, the 2FA flow in this new system looks like this:
1. User initiates an action that requires 2FA;
2. Server is aware that 2FA is required for this action, so it redirects the
user to the 2FA page if the user has a 2FA method, otherwise the action is
performed.
3. User submits the 2FA form on the page;
4. Server validates the 2FA and if it's successful, the action is performed and
the user is redirected to the previous page.
A more technically-detailed explanation/documentation of the new system is
available as a comment at the top of the `lib/second_factor/auth_manager.rb`
file. Please note that the details are not set in stone and will likely change
in the future, so please don't use the system in your plugins yet.
Since this is a new system that needs to be tested, we've decided to migrate
only the 2FA for adding a new admin to the new system at this time (in this
commit). Our plan is to gradually migrate the remaining 2FA implementations to
the new system.
For screenshots of the 2FA page, see PR #15377 on GitHub.
* FIX: Don't accept accents in slug if generation_method == 'ascii'
Fixes bug reported in:
- https://meta.discourse.org/t/404-when-trying-to-edit-category-with-accent-in-slug/214762
- https://meta.discourse.org/t/formatting-and-accents-in-urls/215734/5
Assuming `SiteSetting.slug_generation_method == 'ascii'.
If the user provides a slug containing non-ascii characters while
creating the category, the user will receive a 404 error just
after saving the category since the slug will be escaped anyway but
Category.find_by_slug_path won't escape the category slug
causing the Edit Page of the category to be inaccessible.
This commit checks the provided slug and raises an error if the
provided slugcontains non-ascii characters ensuring that the
provided value is consistent with the site settings.
It also changes Category.find_by_slug_path to always escape the slug,
since if present, it is escaped anyway in Category.ensure_slug to
prevent the 404 in the Edit Category Page in case the user already
have some category with a non-ascii slug.
* Removed trailing whitespace
When parent category or grandparent category is muted, then category should be muted as well.
Still, it can be overridden by setting individual subcategory notification level.
CategoryUser record is not created, mute for subcategories is purely virtual.
This can happen if the topic to which a user is invited is in a private
category and the user was not invited to one of the groups that can see
that specific category.
This used to be a warning and this commit makes it an error.
These calls were originally introduced to ensure that any stale users were cleaned up regularly. This is quite an expensive process to run on every `GET /presence/get` call, and will also cause errors during readonly mode.
Since the original introduction of this logic, we added the `Jobs::PresenceChannelAutoLeave` which runs every minute. That should be enough to clean up any stale users.
Note that users which explicitly `leave` a channel are still removed immediately. This auto_leave logic just takes care of clients which have disappeared without leaving.
This commit introduces two new APIs for handling unused uploads, one
can be used to exclude uploads in bulk when the data model allow and
the other one excludes uploads one by one.
We added this constraint in 5bd55acf83
but it is causing problems in hosted sites and is catching the
issue too far down the line. This commit removes the constraint
for now, and also fixes an issue found with PostDestroyer
which wasn't using the UserStatCountUpdater when updating post_count
and thus was causing negative numbers to occur.
Previously calls such as `Emoji["smile"]` would force a full dehydration of
objects from Redis.
This introduces a version safe site and global emoji cache so lookups are
cheap. It eliminates iterating through the list of emojis and pulling from
redis.
Distributed cache uses a normalized name as the key and stores an Array tuple
with version and Emoji. Successful hits always confirm version matches.
Interface to Emoji object remains unchanged.
We opted for 2 caches to improve reuse on multisites. misses though will be
stored in both caches. If there is a hit on the global cache we can avoid
looking up in site local cache and storing a miss there.
Previously we were calling `EXPIRE` every time we incremented a given key. Instead, we can call EXPIRE once when the key is first populated. A LUA script is used to make this as efficient as possible.
Consumers of this Concern use daily keys. Since we're now calling EXPIRE only at the beginning of the day, rather than throughout the day, the expire time has been increased from 3 to 4 days.
Whenever we got a bounced email in the Email::Receiver we
previously would just set bounced: true on the EmailLog and
discard the status/diagnostic code. This commit changes this
flow to store the bounce error code (defined in the RFC at
https://www.iana.org/assignments/smtp-enhanced-status-codes/smtp-enhanced-status-codes.xhtml)
not just in the Email::Receiver, but also via webhook events
from other mail services and from SNS.
This commit does not surface the bounce error in the UI,
we can do that later if necessary.
Without this parameter, requests for sourcemaps on shared-CDN multisites will not be routed to the correct database, resulting in a 404.
The stylesheet content now depends on the site hostname, so the hostname has been added to the digest.
We serve `service-worker.js` in an unusual way, which means that the sourcemap is not available on an adjacent path. This means that the browser fails to fetch the map, and shows an error in the console.
This commit re-writes the source map reference in the static_controller to be an absolute link to the asset (including the appropriate CDN, if enabled), and adds a spec for the behavior.
It's important to do this at runtime, rather than JS precompile time, so that changes to CDN configuration do not require re-compilation to take effect.
- Update UI to improve contrast
- Make it clear that the message is only shown to administrators
- Add theme name and id to the console output
- Parse the error backtrace to identify the theme-id for post-decoration errors
- Improve console output to include the theme name / URL
- Add `?safe_mode=no_custom` to the admin panel link, so that it will work even if the theme is causing the site to break
The chat quoting mechanism will need to be able to generate
markdown for all kinds of uploads. The UploadMarkdown class
was missing generation for video and audio uploads. This
commit adds that in, and also expands the server-side regex
recognition of FileHelper types to match those in uploads.js,
and adds a spec for UploadMarkdown
When a site has secure media enabled and a post is with secure
media, we were incorrectly cooking custom emoji URLs and using the
secure URL for those emojis, even though they should not be
considered secure (their corresponding upload records in the
database are _not_ secure). Now instead of the blanket
post.with_secure_media? boolean for the secure: param, we also
want to make sure the image whose URL is being cooked is also
_not_ a custom emoji.
This is intended for use by plugins which are building their own
topic lists, and want to include PMs alongside regular topics (e.g.
discourse-assign). It does not get used directly in core.
* DEV: Document external topic id endpoints
This commit documents the existing Create Topic endpoint with the
`external_id` param and documents the new get topic by external id
endpoint.
It also refactors the existing topic show endpoint to use the new format
where we load the expected json schema response from a file.
See: 71f7f7ed49
* clean up unused test variables
Breakdown of fixes in this commit:
* `UserStat#topic_count` was not updated when visibility of
the topic changed.
* `UserStat#post_count` was not updated when post was hidden or
unhidden.
* `TopicConverter` was only incrementing or decrementing the counts by 1
even if a user has multiple posts in the topic.
* The commit turns off the verbose logging by default as it is just
noise to normal users who are not debugging this problem.
- Update UI to improve contrast
- Make it clear that the message is only shown to administrators
- Add theme name and id to the console output
- Parse the error backtrace to identify the theme-id for post-decoration errors
- Improve console output to include the theme name / URL
- Add `?safe_mode=no_custom` to the admin panel link, so that it will work even if the theme is causing the site to break
This adds logic to increase an `InvitedUser` record, increase
`redemption_count` and create a `:invitee_accepted` to let the inviter
know that the invitee used the invite.
Initial support for this was implemented in commit 9969631.
In ab5361d69a, we rescue from the PG error
but the transaction is already aborted causing any DB query after to
fail. As such, we avoid triggering the error in the first place by
checking that we would not be insertin a negative number into the
counter cache.
Follow-up to ab5361d69a
Allows to write custom code blocks:
```
```mermaid height=200,foo=bar
test
```
```
Which will then get converted to:
```
<pre data-code-wrap="mermaid" data-code-height="200" data-code-foo="bar">
<code class="lang-nohighlight">
test
</code>
</pre>
```
Sorting group members worked always kept the group owners at the top of
the list. This commit keeps the group owners at the top of the list only
when no order exists.
This commits adds a new advance_draft to PostCreator that controls if
the draft sequence will be advanced or not. If the draft sequence is
advanced then the old drafts will be cleared. This used to happen for
posts created by plugins or through the API and cleared user drafts
by mistake.
There are still spots in the code base which results in us trying to turn the post and topic count negative. However,
we have a job that runs on a daily basis which will correct the count. Therefore, avoid raising an error for now
and log the exception instead.
* FEATURE: Add external_id to topics
This commit allows for topics to be created and fetched by an
external_id. These changes are API only for now as there aren't any
front changes.
* add annotations
* add external_id to this spec
* Several PR feedback changes
- Add guardian to find topic
- 403 is returned for not found as well now
- add `include_external_id?`
- external_id is now case insensitive
- added test for posts_controller
- added test for topic creator
- created constant for max length
- check that it redirects to the correct path
- restrain external id in routes file
* remove puts
* fix tests
* only check for external_id in webhook if exists
* Update index to exclude external_id if null
* annotate
* Update app/controllers/topics_controller.rb
We need to check whether the topic is present first before passing it to the guardian.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Apply suggestions from code review
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Follow up to 6f7364e48b to add a spec
that tests the full authentication of a Windows Hello algorithm (-257)
webauthn verification. The test added in that commit only tested that
we know about that algorithm, not whether it was actually usable.
* FEATURE: RS512, RS384 and RS256 COSE algorithms
These algorithms are not implemented by cose-ruby, but used in the web
authentication API and were marked as supported.
* FEATURE: Use all algorithms supported by cose-ruby
Previously only a subset of the algorithms were allowed.
This commit introduces our own handling and warning for Sidekiq's new 'non-json-serializable' warning. This decouples us from Sidekiq's own deprecation cycle, and allows us to use our own deprecation system. It also means that the dump/parse happens in test mode, which will help us to catch occurrences before they reach production.
Our discourse_public_exceptions middleware is designed to catch bubbled exceptions from lower in the stack, and then use `ApplicationController.rescue_with_handler` to render an appropriate error response.
When the request itself is invalid, we had an escape-hatch to skip re-dispatching the request to ApplicationController. However, it was possible to work around this by 'layering' the errors. For example, if you made a request which resulted in a 404, but **also** had some other invalidity, the escape hatch would not be triggered.
This commit ensures that these kind of 'layered' errors are properly handled, without logging warnings. It also adds detection for invalid JSON bodies and badly-formed multipart requests.
The user-facing behavior is unchanged. This commit simply prevents warnings being logged for invalid requests.
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
Ensures that `UserStat#post_count` and `UserStat#topic_count` does not
go below 0. When it does like it did now, we tend to have bugs in our
code since we're usually coding with the assumption that the count isn't
negative.
In order to support the constraints, our post and topic fabricators in
tests will now automatically increment the count for the respective
user's `UserStat` as well. We have to do this because our fabricators
bypasss `PostCreator` which holds the responsibility of updating `UserStat#post_count` and
`UserStat#topic_count`.
* Chinese segmenetation will continue to rely on cppjieba
* Japanese segmentation will use our port of TinySegmenter
* Korean currently does not rely on segmentation which was dropped in c677877e4f
* SiteSetting.search_tokenize_chinese_japanese_korean has been split
into SiteSetting.search_tokenize_chinese and
SiteSetting.search_tokenize_japanese respectively
- Limit bulk re-invite to 1 time per day
- Move bulk invite by csv behind a site setting (hidden by default)
- Bump invite expiry from 30 -> 90 days
## Updates to rate_limiter
When limiting reinvites I found that **staff** are never limited in any way. So I updated the **rate_limiter** model to allow for a few things:
- add an optional param of `staff_limit`, which (when included and passed values, and the user passes `.staff?`) will override the default `max` & `secs` values and apply them to the user.
- in the case you **do** pass values to `staff_limit` but the user **does not** pass `staff?` the standard `max` & `secs` values will be applied to the user.
This should give us enough flexibility to
1. continue to apply a strict rate limit to a standard user
2. but also apply a secondary (less strict) limit to staff
Non-staff users are not allowed to see whisper so this change prevents
non-staff user from seeing a like count that does not make sense to
them. In the future, we might consider adding another like count column
for staff user.
Follow-up to 4492718864
When creating a direct message to a group with group SMTP
set up, and adding another person to that message in the OP,
we send an email to the second person in the OP via the group_smtp
job. This in turn creates an IncomingEmail record to guard against
IMAP double sync.
The issue with this was that this IncomingEmail (which is essentialy
a placeholder/dummy one) was having its Message-ID used as the canonical
References Message-ID for subsequent emails sent out to user_private_message
recipients (such as members of the group), causing threading issues in
the mail client. The canonical <topic/ID@HOST> format should be used
instead for these cases.
This commit fixes the issue by only using the IncomingEmail for the
OP's Message-ID if the OP was created via our handle_mail email receiver
pipeline. It does not make sense to use it in other cases.
When the record is not saved, we should display a proper message.
One potential reason can be plugins for example discourse-calendar is specifying that only first post can contain event
* FIX: Remove svg icons from webmanifest shortcuts
While SVGs are valid in the webmanifest, Chromium has not implemented
support for it in this specific manifest member.
Revert when https://bugs.chromium.org/p/chromium/issues/detail?id=1091612
lands.
* fix test
In an earlier PR, we decided that we only want to block a domain if
the blocked domain in the SiteSetting is the final destination (/t/59305). That
PR used `FinalDestination#get`. `resolve` however is used several places
but blocks domains along the redirect chain when certain options are provided.
This commit changes the default options for `resolve` to not do that. Existing
users of `FinalDestination#resolve` are
- `Oneboxer#external_onebox`
- our onebox helper `fetch_html_doc`, which is used in amazon, standard embed
and youtube
- these folks already go through `Oneboxer#external_onebox` which already
blocks correctly
Sometimes plugins need to have additional data or options available
when rendering custom markdown features/rules that are not available
on the default opts.discourse object. These additional options should
be namespaced to the plugin adding them.
```
Site.markdown_additional_options["chat"] = { limited_pretty_text_markdown_rules: [] }
```
These are passed down to markdown rules on opts.discourse.additionalOptions.
The main motivation for adding this is the chat plugin, which currently stores
chat_pretty_text_features and chat_pretty_text_markdown_rules on
the Site object via additions to the serializer, and the Site object is
not accessible to import via markdown rules (either through
Site.current() or through container.lookup). So, to have this working
for both front + backend code, we need to attach these additional options
from the Site object onto the markdown options object.
When staff visits the user profile of another user, the `email` field
in the model is empty. In this case, staff cannot send the reset email
password because nothing is passed in the `login` field.
This commit changes the behavior for staff users to allow resetting
password by username instead.
This commit fixes a bug where we our `HTMLScrubber` was only searching
for emoji img tags which contains only the "emoji" class. However, our emoji image tags
may contain more than just the "emoji" class like "only-emoji" when an
emoji exists by itself on a single line.
If a model class calls preload_custom_fields twice then
we have to clear this otherwise the fields are cached inside the
already existing proxy and no new ones are added, so when we check
for custom_fields[KEY] an error is likely to occur
In the unlikely, but possible, scenario where a user has no email_tokens, and has an invite record for their email address, login would fail. This commit fixes the `Invite` `user_doesnt_already_exist` validation so that it only applies to new invites, or when changing the email address.
This regressed in d8fe0f4199 (based on `git bisect`)
The UI used to request a password reset by username when the user was
logged in. This did not work when hide_email_already_taken site setting
was enabled, which disables the lookup-by-username functionality.
This commit also introduces a check to ensure that the parameter is an
email when hide_email_already_taken is enabled as the single allowed
type is email (no usernames are allowed).
Our previous implementation used a simple `blocked_domain_array.include?(hostname)`
so some values were not matching. Additionally, in some configurations like ours, we'd used
"cat.*.dog.com" with the assumption we'd support globbing.
This change implicitly allows globbing by blocking "http://a.b.com" if "b.com" is a blocked
domain but does not actively do anything for "*".
An upcoming change might include frontend validation for values that can be inserted.
* FIX: Tag watching for everyone tag groups
Tags in tag groups that have permissions set to everyone were not able
to be saved correctly. A user on their preferences page would mark the
tags that they wanted to save, but the watched_tags in the response
would be empty. This did not apply to admins, just regular users. Even
though the watched tags were being saved in the db, the user serializer
response was filtering them out. When a user refreshed their preferences
pages it would show zero watched tags.
This appears to be a regression introduced by:
0f598ca51e
The issue that needed to be fixed is that we don't track the "everyone"
group (which has an id of 0) in the group_users table. This is because
everyone has access to it, so why fill a row for every single user, that
would be a lot. The fix was to update the query to include tag groups
that had permissions set to the "everyone" group (group_id 0).
I also added another check to the existing spec for updating
watched tags for tags that aren't in a tag group so that it checks the
response body. I then added a new spec which updates watched tags for
tags in a tag group which has permissions set to everyone.
* Resolve failing tests
Improve SQL query syntax for including the "everyone" group with the id
of 0.
This commit also fixes a few failing tests that were introduced. It
turns out that the Fabrication of the Tag Group Permissions was faulty.
What happens when creating the tag groups without any permissions is
that it sets the permission to "everyone". If we then follow up with
fabricating a tag group permission on the tag group instead of having a
single permission it will have 2 (everyone + the group specified)! We
don't want this. To fix it I removed the fabrication of tag group
permissions and just set the permissions directly when creating the tag
group.
* Use response.parsed_body instead of JSON.parse
* FIX: Mark invites flash messages as HTML safe.
This change should be safe as all user inputs included in the errors are sanitized before sending it back to the client.
Context: https://meta.discourse.org/t/html-tags-are-explicit-after-latest-update/214220
* If somebody adds a new error message that includes user input and doesn't sanitize it, using html-safe suddenly becomes unsafe again. As an extra layer of protection, we make the client sanitize the error message received from the backend.
* Escape user input instead of sanitizing
* FEATURE: Export topics to markdown
The route `/raw/TOPIC_ID` will now export whole topics (paginated to 100
posts) in a markdown format.
See https://meta.discourse.org/t/-/152185/12
If the SiteSetting `allowed_onebox_iframes` contains a value of `*`, it will use the values of `all_iframe_origins` during the Oneboxing process. If `all_iframe_origins` itself contains a value of `*`, `origins_to_regexes` will try to return a "catch-all" regex.
Other code assumes `origins_to_regexes`will return an array, so this change ensures the `*` case will return an array containing only the catch-all regex.
1. `html_doc.css('.Box.md')` always returns a truthy value (e.g. `[]`) so the second branch of the if-elsif never ran
2. `node&.css('text()')` was invalid code that would raise an error
3. Matching on h3 elements is no longer correct with the current html structure returned by GitHub
* FIX: Pass category and tag IDs to the emit webhook event job.
Like webhooks won't fire when they're scoped to specific categories or tags because we're not passing the data to the job that emits it.
* Update config/initializers/012-web_hook_events.rb
Co-authored-by: Dan Ungureanu <dan@ungureanu.me>
Co-authored-by: Dan Ungureanu <dan@ungureanu.me>
This reverts commit 2c7906999a.
The changes break some things in local development (putting JS files
into minified files, not allowing debugger, and others)
This reverts commit ea84a82f77.
This is causing problems with `/theme-qunit` on legacy, non-ember-cli production sites. Reverting while we work on a fix
This is quite complex as it means that in production we have to build
Ember CLI test files and allow them to be used by our Rails application.
There is a fair bit of glue we can remove in the future once we move to
Ember CLI completely.
An admin could search for all screened ip addresses in a block by
using wildcards. 192.168.* returned all IPs in range 192.168.0.0/16.
This feature allows admins to search for a single IP address in all
screened IP blocks. 192.168.0.1 returns all IP blocks that match it,
for example 192.168.0.0/16.
* FEATURE: Remove roll up button for screened IPs
* FIX: Match more specific screened IP address first
The new warnings cover more cases and more accurate. Most of the
warnings will be visible only to staff members because otherwise they
would leak information about user's preferences.
This commit extends the options which can be passed to
`PrettyText.markdown` so that which Markdown-it rules and Discourse
Markdown plugins to be used when rendering a text can be customizable.
Currently, this extension is mainly used by plugins.
