* Fixes big gap at the left of the plugins list.
* Fixes plugin settings list padding, the yellow overridden
dot was cut off on mobile.
* Also increased settings filter input size and settings
sidebar button margin.
In 61c1d35f17 I added a
PluginOutlet to AdminPluginConfigPage. This was intended to be
used as a way to render actions buttons inside the header of
a plugin that has a custom admin UI page. This worked, but
since the outlet was generically named, as soon as one plugin
used it the button would show on all plugins.
This fixes the immediate issue by naming the outlet based
on the plugin, then having each plugin specify their own
outlet to render into. There may be a nicer way to do this,
but for now this stops the bleeding.
This commit introduces a feature that allows an admin to delete a user's
associated account. After deletion, a log will be recorded in staff
actions.
ref=t/136675
the radical change in the implementation doesn't stem from the glimmer migration, but rather the fact that previously the component was single-use – changing any of its args didn't (and couldn't) be reflected because hljs was replacing the nodes so all the ember bookkeeping was gone.
Co-authored-by: David Taylor <david@taylorhq.com>
his is a new feature that lets admins dismiss notices from the dashboard. This helps with self-service in cases where a notice is "stuck", while we work on provisions to prevent "sticking" in the first place.
Currently, when the custom flag has the same name as the system flag (which is disabled) then it is not displayed. To fix the problem, `custom_` prefix as `name_key` is used to distinguish between the system and the custom flag.
I considered writing a migration to fix existing custom flags name key. However, at the end of migration I would need to run rails code to reset cache `Flag.reset_flag_settings!`. I decided to skip that step as it is a very edge case. If someone has the same flag name as the system flag, then all they have to do is edit the flag and click save.
In addition, I made 2 small fixes:
- edit flag title was missing translation;
- flag form UI was not showing that description is the required field.
This commit converts the current chat plugin UI into the
new "show plugin" UI already followed by AI and Gamification.
In the process, I also:
* Made a dedicated /new route to create new webhooks
* Converted the webhook form to FormKit
* Made some fixes and improvements to the `AdminPluginConfigPage`, `AdminPageHeader`,
and `AdminPageSubheader` generic components, so more plugins can
adopt the UI guidelines too. This includes adding a header outlet so plugins
can add action buttons to the plugin show page header.
* Fixes the submit button loading state for FormKit (by Joffrey)
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Followup 14b436923c
On the standalone Site Traffic report page, we also need
to hide the 'other' and 'crawler' pageviews by default
like we do on the admin dashboard.
### UI changes
All of the UI changes described are gated behind the `use_legacy_pageviews`
site setting.
This commit changes the admin dashboard pageviews report to
use the "Consolidated Pageviews with Browser Detection" report
introduced in 2f2da72747 with
the following changes:
* The report name is changed to "Site traffic"
* The pageview count on the dashboard is counting only using the new method
* The old "Consolidated Pageviews" report is renamed as "Consolidated Legacy Pageviews"
* By default "known crawlers" and "other" sources of pageviews are hidden on the report
When `use_legacy_pageviews` is `true`, we do not show or allow running
the "Site traffic" report for admins. When `use_legacy_pageviews` is `false`,
we do not show or allow running the following legacy reports:
* consolidated_page_views
* consolidated_page_views_browser_detection
* page_view_anon_reqs
* page_view_logged_in_reqs
### Historical data changes
Also part of this change is that, since we introduced our new "Consolidated
Pageviews with Browser Detection" report, some admins are confused at either:
* The lack of data before a certain date , which didn’t exist before
we started collecting it
* Comparing this and the current "Consolidated Pageviews" report data,
which rolls up "Other Pageviews" into "Anonymous Browser" and so it
appears inaccurate
All pageview data in the new report before the date where the _first_
anon or logged in browser pageview was recorded is now hidden.
* FEATURE: Log tag group changes in staff action log
This commit records every change (add, change, delete) to a tag group in
the staff action log.
It uses a modal that was originally called ThemeChangeModal to display
changes, allowing staffs to see the specific changes clearly. The modal
is renamed to StaffActionLogChangeModal in this PR.
ref: https://meta.discourse.org/t/-/325011/14
Co-authored-by: Keegan George <kgeorge13@gmail.com>
* UX: Add a description about badges
* WIP: Apply admin UI guidelines
* FIX: Add routeModels to dbutton
Allows routeModels to be passed to a DButton along
with route, so we can use them as a LinkTo replacement
in more places.
Also fix up badges admin page header.
* UX: Reorder action buttons
* UX: Change header hierarchy to better align page's content structure
* UX: Update copy and remove unnecessary UI elements
* UX: Adjust header's icon spacing
* UX: Fix the header action buttons on mobile
* Apply prettier
---------
Co-authored-by: Martin Brennan <martin@discourse.org>
This will bring significant improvements to install speed & storage requirements. For information on how it may affect you, see https://meta.discourse.org/t/324521
This commit:
- removes the `yarn.lock` and replaces with `pnpm-lock.yaml`
- updates workspaces to pnpm format
- adjusts package dependencies to work with pnpm's stricter resolution strategy
- updates Rails app to load modules from more specific node_modules directories
- adds a `.pnpmfile` which automatically cleans up old yarn-managed `node_modules` directories
- updates various scripts to call `pnpm` instead of `yarn`
- updates patches to use pnpm's native patch system instead of patch-package
- adds a patch for licensee to support pnpm
A new setting attribute is used to define the areas (separated by `|`).
In addition, endpoint `/admin/config/site_settings.json` accepts new `filter_area` data.
A previous refactor has moved this function in the controller instead of the route making it inaccessible to the modal.
This commit is fixing this and also adding a spec.
This commit introduces a little bit of duplication
since the old plugin UIs not using the new plugin show
page look different from ones like AI and Gamification
which have been converted. We can use the new admin
header component on the plugins list, but for the other
pages we are manually rendering a breadcrumb trail and
the list of plugin tabs.
Over time as we convert more plugins to use the new UI
guidelines and show page we can get rid of this duplication.
When the tooltip items are tooltipItem = [{parsed: {y:12} }, {parsed: {y:10} } ], reducing without a initial value as a number would result in Javascript thinking it is a string. Thanks, Javascript!
There are no tests here yet since this makes use of an external library Chart.js.
In FormKit you can add error on an existing field existing in the DOM, but you can also set an arbitrary error on a virtual field not existing in the DOM.
When revalidating existing data, we are only resetting real fields. This commit adds `removeError(name)` to allow you to manually manage virtual fields. `removeError` is available in the same helpers where `addError` is available.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
A follow-up to dd1abf91ef.
Because `ember-cli-deprecation-workflow` relied on `@ember/string` 3.1.1, that was the effective version used in the app.
Turns out there's a compatiblity issue with 4.0.0. Let's lock it to 3.x so we can easily update deprecation-workflow and then we can look into the ember/string issue.
All those addons import it but didn't have it in their package.jsons. And because the only thing that had it as a dependency (ember-cli-deprecation-workflow) removed it in the latest version, the build breaks.
File it under: a problem we wouldn't have with pnpm :P
When searching for site texts for admin using the english
version of the text, previously we would show the english
version in the results _even if_ there was another locale
translated version available when a locale was selected
from the dropdown.
This commit adds a "Only show results in selected locale"
checkbox option which will instead make it so the results
shown are in the target locale, making it easier for translators
to tell when there is actually translations vs. missing tranlsations.
This change is preventing the "is dirty check" from happening when clicking delete on this form. This was not good UX and was also causing bugs by leaving the form in a unexpected state.
Followup 1446596089
The link to inform admins that restore is disabled
was not correct. This fixes it and also changes it
to go to /admin/backups/settings
This commit changes the custom flags admin config area
to use the AdminPageHeader component and conforms
to the new admin UI guidelines. Also makes some slight
modifications to the reusable components to handle using
a @route for an action button.
This commit fixes a bug where the silence button is incorrectly displayed on the admin page of a staff user. It's not actually possible to silence a staff user because the backend correctly prevents it, but the frontend isn't checking if the button should be displayed.
Another small bug that this commit fixes is the similar users list not showing up inside the silence/suspend modals due to also a bug in the frontend.
I've also changed the way similar users are loaded so that they're not returned by the `admin/users#show` endpoint anymore and moved them into a new endpoint that the penalize modals (suspend and silence) can call directly to retrieve the list of users. This is done because the similar users list is never shown on the admin user page (`/admin/users/:user_id/:username`); they're only needed when the suspend or silence modals are opened.
Internal topic: t/130014.
This commit converts the Backups page in the admin interface
to follow our new admin interface guidelines.
As part of this work, I've also made `AdminPageHeader` and `AdminPageSubheader`
components that can be reused on any admin page for consistency, that handle
the title and action buttons and also breadcrumbs.
Also renamed `AdminPluginFilteredSiteSettings` to `AdminFilteredSiteSettings` since
it can be used generally to show a subset of filtered site settings, not only
settings for a plugin. Not sure if it's ideal to have to define a new route for this
for every config area, but not sure how else to do it right now.
This commit adds a blue dot next to the "What's New"
link in the admin sidebar if the user has not seen the
new features yet, as a followup to 3e5976f843
which removed the tab on the dashboard that had this same
functionality.
When the admin visits the "What's New" page they count
as having seen all the features straight away. This could
be something we want to change, but for now this keeps the
same functionality.
We used to show New Features in a tab on the dashboard,
but this could get pushed down the page especially on
our hosting. In 043117ca13
we made a separate What's New page, so this commit removes
the dashboard tab and changes the admin notification to
send the admin to /admin/whats-new instead of the dashboard
tab.
This commit fixes a number of bugs in `file_size_restriction` settings and does a little of refactoring to reduce duplicated code in site setting types (the refactoring is necessary to fix one of the bugs).
The bugs in `file_size_restriction` settings that are fixed in this commit:
1. Save/cancel buttons next to a `file_size_restriction` setting are shown upon navigating to the settings page without changes being made to the setting
2. Cancel button that discards changes made to the setting doesn't work
3. Reset button that resets the setting to its default doesn't work
4. Validation error message isn't cleared when resetting/cancelling changes
To repro those bugs, navigate to `/admin/site_settings/category/files` and observe the top 2 settings in the page (`max image size kb` and `max attachment size kb`).
Internal topic: t/134726.
This commit fixes a bug in the redesigned about page where if there's no banner image configured for the page, the top of the page where the banner goes is occupied with large white space. Additionally, this commit also fixes a related bug in the admin config area for the /about page where it's not possible to remove the uploaded banner image.
Very similar to move up/down flag problem fixed here - https://github.com/discourse/discourse/pull/28272
Those are the steps to toggle the flag:
1. click toggle - `saving` CSS class is added;
2. request to backend;
3. `saving` CSS class is removed.
And check if the flag was toggle was:
```ruby
def has_saved_flag?(key)
has_css?(".admin-flag-item.#{key}.saving")
has_no_css?(".admin-flag-item.#{key}.saving")
end
```
If the save action is very fast, then the saving class is removed before the first check.
Therefore I decided to invert it, and once action is finished add `saved` CSS class.
Then we can have a quick positive check:
```ruby
def has_saved_flag?(key)
has_css?(".admin-flag-item.#{key}.saved")
end
```
This commit adds two new getters to the category model:
- `displayName`
- `descriptionText`
These getters are used instead of `name` and `description_text` where appropriate.
On top of this two transformers have been added to allow plugins to alter these getters:
```javascript
api.registerValueTransformer(
"category-display-name",
({ value, context }) =>
value + "-" + context.category.id + "-transformed"
);
```
```javascript
api.registerValueTransformer(
"category-description-text",
({ value, context }) =>
value + "-" + context.category.id + "-transformed"
);
```
Those are the steps to move the flag:
1. open menu;
2. click move up - `saving` CSS class is added;
3. request to backend;
4. `saving` CSS class is removed.
To check if the action was finished we are using this method:
```
def move_up(key)
open_flag_menu(key)
find(".admin-flag-item__move-up").click
has_saved_flag?(key)
self
end
def has_saved_flag?(key)
has_css?(".admin-flag-item.#{key}.saving")
has_no_css?(".admin-flag-item.#{key}.saving")
end
```
However, sometimes specs were failing with `expected to find CSS ".admin-flag-item.spam.saving" but there were no matches`
I think that the problem is with those 2 lines:
```
find(".admin-flag-item__move-up").click
has_closed_flag_menu?
```
If the save action is very fast, then the `saving` class is removed before the first check.
Therefore, to determine that the move action is finished, I am checking if the menu is closed.
During our refactoring of admin badges we decided to link to:
`adminSiteText.edit locale=locale`
Instead of:
`adminSiteText q=key`
After feedback from the community we are reverting this change.
A recent change in FormKit has changed the syntax of this specific component. It's also better to use `<CheckboxGroup />` for this use case too.
Im mixed on writing tests for labels, it's a lot of tests to write for a rather low value.
This commit also slightly tweaks the width of the icon picker, from medium to small.
Admin can create up to 50 custom flags. It is limited for performance reasons.
When the limit is reached "Add button" is disabled and backend is protected by guardian.
The Safari 15 bugfix has been rolled into @babel/preset-env in the most recent version, so we no longer need to carry our vendored copy.
This commit updates @babel/preset-env, runs npx yarn-deduplicate yarn.lock, and removes the vendored transform.
This commit also refactors our theme transpiler to use @babel/preset-env, with the same list of target browsers as our ember-cli build uses. This means we no longer need to maintain a separate list of babel transforms for themes.
In the formkit conversion in 2ca06ba236
we missed setting a type for the UppyImageUploader for badges. Also,
we were not passing down the `image_url` as form data, so when we used
`data.image` for that field the badge was not updating in the UI after
page loads and the image URL was not loading for preview.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Ember's legacy mixin system does not support native-class syntax, so we have to use the non-decorator syntaxes for `action()` and `computed()`.
Eventually, we will need to refactor things to remove these mixins... but today is not that day.
Followup 4aea12fdcb
In certain config areas (like About) we want to be able
to fetch specific site settings by name. In this case,
sometimes we need to be able to fetch hidden settings,
in cases where a config area is still experimental.
Splitting out a different endpoint for this purpose
allows us to be stricter with what we return for config
areas without affecting the main site settings UI, revealing
hidden settings before they are ready.
Form Kit is our new form library/framework for unifying the way forms look across Discourse. The admin config area for the /about page is a new form that isn't currently used, so it makes sense for it to be one of the first forms to be migrated to Form Kit to test the library.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
* `@ember/owner` instead of `@ember/application`
* `discourse-i18n` instead of `I18n`
* `{ service } from "@ember/service"` instead of `inject as service`
Followup dd30463276
We missed the explicit `return` when we changed to
async/await, so the model ends up being null on admin
backups.
This means we also have no tests for the backup UI, that
will be fixed in a subsequent PR.
Allow admin to create custom flag which requires an additional message.
I decided to rename the old `custom_flag` into `require_message` as it is more descriptive.
This PR introduces FormKit, a component-based form library designed to simplify form creation and management. This library provides a single `Form` component, various field components, controls, validation mechanisms, and customization options. Additionally, it includes helpers to facilitate testing and writing specifications for forms.
1. **Form Component**:
- The main component that encapsulates form logic and structure.
- Yields various utilities like `Field`, `Submit`, `Alert`, etc.
**Example Usage**:
```gjs
import Form from "discourse/form";
<template>
<Form as |form|>
<form.Field
@name="username"
@title="Username"
@validation="required"
as |field|
>
<field.Input />
</form.Field>
<form.Field @name="age" @title="Age" as |field|>
<field.Input @type="number" />
</form.Field>
<form.Submit />
</Form>
</template>
```
2. **Validation**:
- Built-in validation rules such as `required`, `number`, `length`, and `url`.
- Custom validation callbacks for more complex validation logic.
**Example Usage**:
```javascript
validateUsername(name, value, data, { addError }) {
if (data.bar / 2 === value) {
addError(name, "That's not how maths work.");
}
}
```
```hbs
<form.Field @name="username" @validate={{this.validateUsername}} />
```
3. **Customization**:
- Plugin outlets for extending form functionality.
- Styling capabilities through propagated attributes.
- Custom controls with properties provided by `form` and `field`.
**Example Usage**:
```hbs
<Form class="my-form" as |form|>
<form.Field class="my-field" as |field|>
<MyCustomControl id={{field.id}} @onChange={{field.set}} />
</form.Field>
</Form>
```
4. **Helpers for Testing**:
- Test assertions for form and field validation.
**Example usage**:
```javascript
assert.form().hasErrors("the form shows errors");
assert.form().field("foo").hasValue("bar", "user has set the value");
```
- Helper for interacting with he form
**Example usage**:
```javascript
await formKit().field("foo").fillIn("bar");
```
5. **Page Object for System Specs**:
- Page objects for interacting with forms in system specs.
- Methods for submitting forms, checking alerts, and interacting with fields.
**Example Usage**:
```ruby
form = PageObjects::Components::FormKit.new(".my-form")
form.submit
expect(form).to have_an_alert("message")
```
**Field Interactions**:
```ruby
field = form.field("foo")
expect(field).to have_value("bar")
field.fill_in("bar")
```
6. **Collections handling**:
- A specific component to handle array of objects
**Example Usage**:
```gjs
<Form @data={{hash foo=(array (hash bar=1) (hash bar=2))}} as |form|>
<form.Collection @name="foo" as |collection|>
<collection.Field @name="bar" @title="Bar" as |field|>
<field.Input />
</collection.Field>
</form.Collection>
</Form>
```
Followup 560e8aff75
GitHub auth tokens cannot be made with permissions to
access multiple organisations. This is quite limiting.
This commit changes the site setting to be a "secret list"
type, which allows for a key/value mapping where the value
is treated like a password in the UI.
Now when a GitHub URL is requested for oneboxing, the
org name from the URL is used to determine which token
to use for the request.
Just in case anyone used the old site setting already,
there is a migration to create a `default` entry
with that token in the new list setting, and for
a period of time we will consider that token valid to
use for all GitHub oneboxes as well.
Allow admin to create custom flag which requires an additional message.
I decided to rename the old `custom_flag` into `require_message` as it is more descriptive.
Followup db993cf8fd
Since in the above commit we converted integer site settings
to actual integers then set that as the new `buffered.value`,
the overridden indicator technically thinks the value has changed,
even if the user sets it back to the default:
```
overridden: propertyNotEqual("setting.default", "buffered.value"),
```
We can fix this by converting the parsed integer back to a string
before setting the buffered setting value.
- set in constructor so they're guaranteed to be present, even if async-import hasn't finished yet
- ensure they're all cleaned up properly
- combine two cleanup methods into one
