It was not clear that replace watched words can be used to replace text
with URLs. This introduces a new watched word type that makes it easier
to understand.
Refactors `TrustLevel` and moves translations from server to client
Additional changes:
* "staff" and "admin" wasn't translatable in site settings
* it replaces a concatenated string with a translation
* uses translation for trust levels in users_by_trust_level report
* adds a DB migration to rename keys of translation overrides affected by this commit
In Ember CLI, the vendor bundler includes Ember/jQuery, so this brings
our app closer to that configuration.
We have a couple pages (Reset Password / Confirm New Email) where we need
`ember_jquery` without vendor so the file still exists for those cases.
When a topic is fully merged into another topic we close it. Now we want also to set a timer for deleting this topic. By default, stub topics will be deleted in 7 days. Users can change this period or disable auto-deleting by setting the period to 0.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
Using 1 as the default value is confusing for some people as low-score flags are hidden unless staff uses the "(any)" priority filter. Let's change it to 0 and let every site adjust the setting to match their needs.
There are two methods which the server uses to verify an invite is being redeemed with a matching email:
1) The email token, supplied via a `?t=` parameter
2) The validity of the email, as provided by the auth provider
Only one of these needs to be true for the invite to be redeemed successfully on the server. The frontend logic was previously only checking (2). This commit updates the frontend logic to match the server.
This commit does not affect the invite redemption logic. It only affects the 'show' endpoint, and the UI.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
This PR improves the UI of bulk select so that its context is applied to the Dismiss Unread and Dismiss New buttons. Regular users (not just staff) are now able to use topic bulk selection on the /new and /unread routes to perform these dismiss actions more selectively.
For Dismiss Unread, there is a new count in the text of the button and in the modal when one or more topic is selected with the bulk select checkboxes.
For Dismiss New, there is a count in the button text, and we have added functionality to the server side to accept an array of topic ids to dismiss new for, instead of always having to dismiss all new, the same as the bulk dismiss unread functionality. To clean things up, the `DismissTopics` service has been rolled into the `TopicsBulkAction` service.
We now also show the top Dismiss/Dismiss New button based on whether the bottom one is in the viewport, not just based on the topic count.
Re-lands the change initially proposed on #8359 but without a new nginx
location block, so it has less change surface.
Co-authored-by: Jeff Wong <awole20@gmail.com>
Co-authored-by: Jeff Wong <awole20@gmail.com>
Code fences:
1. allow to have syntax highlighting by declaring a language
2. are easier to edit (the composer doesn't preserve indentation when inserting a new line)
3. are more popular
When slow mode is enabled it's possible to open the slow mode dialog again to disable it or to update slow mode settings. The problem is that in this case, the button for saving still has the label "Enable" which is confusing.
This changes the text on the button from "Enable" to "Update" when slow mode is already enabled.
Based on feedback from Matt Haughey, we don't need to use so many words when describing a deleted topic or post.
Co-authored-by: Martin Brennan <martin@discourse.org>
When editing the first post for the topic we do two AJAX requests
to two separate controllers in this order:
PUT /t/topic-name
PUT /posts/2489523
This causes two post revisor calls, which end up triggering the
:post_edited DiscourseEvent twice. This is then picked up and sent
as a WebHook event twice. However we do not need to send a :post_edited
webhook event if the first post is being edited and topic_changed is
true from the :post_edited DiscourseEvent, because a second event will
shortly come through for just the post.
See https://meta.discourse.org/t/post-webhook-fires-two-times-on-post-edited-for-first-post-in-a-topic/162408
Continued on from https://github.com/discourse/discourse/pull/10590
It used to allow adding email addresses to a group even if invites were
disabled for the site. This does not allow user to input email address
if they cannot invite.
The second thing this commit improves is the message that is displayed
to the user when they hit the invite rate limit.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
Too long excerpts don't make sense. They would make UI wonky. We already have a constraint for the `topic_excerpt_maxlength` setting. This adds the same constraint to `post_excerpt_maxlength`.
It also changes the max value of `topic_excerpt_maxlength` from 999 to 1000.
The auto restart logic was sending a USR2 to the parent process without checking what the parent process actually was. In some situations, it might not be the `bin/unicorn` supervisor.
This commit switches to use a global variable for the supervisor PID. This will be much less prone to unexpected behavior.
* DEV: Allow wildcards in Oneboxer optional domain Site Settings
Allows a wildcard to be used as a subdomain on Oneboxer-related SiteSettings, e.g.:
- `force_get_hosts`
- `cache_onebox_response_body_domains`
- `force_custom_user_agent_hosts`
* DEV: fix typos
* FIX: Try doing a GET after receiving a 500 error from a HEAD
By default we try to do a `HEAD` requests. If this results in a 500 error response, we should try to do a `GET`
* DEV: `force_get_hosts` should be a hidden setting
* DEV: Oneboxer Strategies
Have an alternative oneboxing ‘strategy’ (i.e., set of options) to use when an attempt to generate a Onebox fails. Keep track of any non-default strategies that were used on a particular host, and use that strategy for that host in the future.
Initially, the alternate strategy (`force_get_and_ua`) forces the FinalDestination step of Oneboxing to do a `GET` rather than `HEAD`, and forces a custom user agent.
* DEV: change stubbed return code
The stubbed status code needs to be a value not recognized by FinalDestination
We have a few places in the code where we need to validate various email related settings, and will have another soon with the improved group email settings UI. This PR introduces a class which can validate POP3, IMAP, and SMTP credentials and also provide a friendly error message for issues if they must be presented to an end user.
This PR does not change any existing code to use the new service. I have added a TODO to change POP3 validation and the email test rake task to use the new validator post-release.
* FIX: Ensure the same email cannot be invited twice
When creating a new invite with a duplicated email, the old invite will
be updated and returned. When updating an invite with a duplicated email
address, an error will be returned.
* FIX: not Ember helper does not exist
* FIX: Sync can_invite_to_forum? and can_invite_to?
The two methods should perform the same basic set of checks, such as
check must_approve_users site setting.
Ideally, one of the methods would call the other one or be merged and
that will happen in the future.
* FIX: Show invite to group if user is group owner
This commit adds a listener on (almost) all `.rb` files in the repository. When a change occurs, it checks whether Zeitwerk is responsible for autoloading it. If not, a warning will be printed to the console and the server will be automatically restarted. Optionally, you can pass the `AUTO_RESTART=0` environment variable to prevent auto-restart.
Currently, when the target is not available we're returning the error message "`You are not permitted to view the requested resource`" which is not clear.
