This is broken in narrow screens - the sidebar shrinks to unusable
proportions but still stays.
So instead we go the *other* way, force the left margin and undo the flexifying.
(again we should really stop relying on sphinx' css)
Sphinx 5.0 makes the document div a flex container, which clashes
badly with the margin that earlier versions need.
So we remove the margin and flex the div ourselves, which should work
with either.
It's time we make this freestanding - these changes are annoying.
This makes it so `complete -c foo -n test1 -n test2` registers *both*
conditions, and when it comes time to check the candidate, tries both,
in that order. If any fails it stops, if all succeed the completion is offered.
The reason for this is that it helps with caching - we have a
condition cache, but conditions like
```fish
test (count (commandline -opc)) -ge 2; and contains -- (commandline -opc)[2] length
test (count (commandline -opc)) -ge 2; and contains -- (commandline -opc)[2] sub
```
defeats it pretty easily, because the cache only looks at the entire
script as a string - it can't tell that the first `test` is the same
in both.
So this means we separate it into
```fish
complete -f -c string -n "test (count (commandline -opc)) -ge 2; and contains -- (commandline -opc)[2] length" -s V -l visible -d "Use the visible width, excluding escape sequences"
+complete -f -c string -n "test (count (commandline -opc)) -ge 2" -n "contains -- (commandline -opc)[2] length" -s V -l visible -d "Use the visible width, excluding escape sequences"
```
which allows the `test` to be cached.
In tests, this improves performance for the string completions by 30%
by reducing all the redundant `test` calls.
The `git` completions can also greatly benefit from this.
This adds a path builtin to deal with paths.
It offers the following subcommands:
filter to go through a list of paths and only print the ones that pass some filter - exist, are a directory, have read permission, ...
is as a shortcut for filter -q to only return true if one of the paths passed the filter
basename, dirname and extension to print certain parts of the path
change-extension to change the extension to a different one (as a string operation)
normalize and resolve to canonicalize the paths in various flavors
sort to sort paths, also only using the basename or dirname as a key
The definition of "extension" here was carefully considered and should line up with how extensions are actually used - ~/.bashrc doesn't have an extension, but ~/.conf.d does (".d").
These subcommands all compose well - they can read from arguments or stdin (like string), they can use null-delimited input or output (input is autodetected - if a NULL happens in the first PATH_MAX bytes it switches automatically).
It is both a failglob exception (so like set if a glob passed to it fails it just doesn't get any arguments for it instead of triggering an error), and passes output to command substitution buffers explicitly split (like string split0) so newlines are easy to handle.
This is now added to the two commands that definitely deal with
relative paths.
It doesn't work for e.g. `path basename`, because after removing the
dirname prepending a "./" doesn't refer to the same file, and the
basename is also expected to not contain any slashes.
This includes the "." in what `path extension` prints.
This allows distinguishing between an empty extension (just `.`) and a
non-existent extension (no `.` at all).
These are short flags for "--perm=read" and "--type=link" and such.
Not every type or permission has a shorthand - we don't want "-s" for
"suid". So just the big three each get one.
This is theoretically sound, because a path can only be PATH_MAX - 1
bytes long, so at least the PATH_MAXest byte needs to be a NULL.
The one case this could break is when something has a NULL-output mode
but doesn't bother printing the NULL for only one path, and that path
contains a newline. So we leave --null-in there, to force it on.
This adds a "path" builtin that can handle paths.
Implemented so far:
- "path filter PATHS", filters paths according to existence and optionally type and permissions
- "path base" and "path dir", run basename and dirname, respectively
- "path extension PATHS", prints the extension, if any
- "path strip-extension", prints the path without the extension
- "path normalize PATHS", normalizes paths - removing "/./" components
- and such.
- "path real", does realpath - i.e. normalizing *and* link resolution.
Some of these - base, dir, {strip-,}extension and normalize operate on the paths only as strings, so they handle nonexistent paths. filter and real ignore any nonexistent paths.
All output is split explicitly, so paths with newlines in them are
handled correctly. Alternatively, all subcommands have a "--null-input"/"-z" and "--null-output"/"-Z" option to handle null-terminated input and create null-terminated output. So
find . -print0 | path base -z
prints the basename of all files in the current directory,
recursively.
With "-Z" it also prints it null-separated.
(if stdout is going to a command substitution, we probably want to
skip this)
All subcommands also have a "-q"/"--quiet" flag that tells them to skip output. They return true "when something happened". For match/filter that's when a file passed, for "base"/"dir"/"extension"/"strip-extension" that's when something about the path *changed*.
Filtering
---------
`filter` supports all the file*types* `test` has - "dir", "file", "link", "block"..., as well as the permissions - "read", "write", "exec" and things like "suid".
It is missing the tty check and the check for the file being non-empty. The former is best done via `isatty`, the latter I don't think I've ever seen used.
There currently is no way to only get "real" files, i.e. ignore links pointing to files.
Examples
--------
> path real /bin///sh
/usr/bin/bash
> path extension foo.mp4
mp4
> path extension ~/.config
(nothing, because ".config" isn't an extension.)
This teaches `--on-signal SIGINT` (and by extension `trap cmd SIGINT`)
to work properly in scripts, not just interactively. Note any such
function will suppress the default behavior of exiting. Do this for
SIGTERM as well.
With sphinx 4.5.0:
1. Some of our builtins actually give results (cd, end, set)
2. Some give broken results (and, if, or)
3. Only "for" even triggers the help page we hacked in
So this is of dubious use, and removing it gets us out of the awkward situation of shipping it.
Plus upstream sphinx has ditched jquery, so we would have to rewrite it anyway.
This can no longer be changed. If "no-stderr-nocaret" is in
$fish_features it will simply be ignored.
The "^" redirection that was deprecated in fish 3.0 is now gone for good.
Note: For testing reasons, it can still be set _internally_ by running
"feature_flags_t::set". We simply shouldn't do that.
Currently, when a variable like $fish_color_command is set but empty:
set -g fish_color_command
what happens is that highlight parses it and ends up with a "normal"
color.
Change it so instead it sees that the variable is empty and goes
on to check the fallback variable, e.g. fish_color_normal.
That makes it easier to make themes that override variables.
This means that older themes that expect an empty variable to be
"normal" need to be updated to set it to "normal".
Following from this, we could make writing .theme files easier by no
longer requiring them to list all variables with specific values.
Either the theme reader could be updated to implicitly set known color
variables to empty, or the themes could feature empty values.
See #8787.
* New -n flag for string join command.
This is an argument that excludes empty result items. Fixes#8351
* New documentation for string-join.
The new argument --no-empty was added at string-join manpage.
* New completions for the new -n flag for string join.
* Remove the documentation of the new -n flag of string join0
The reason to remove this new argument in the join0 is that this flag basically doesn't make any difference in the join0.
* Refactor the validation for the string join.
The string join command was using the length of the argument, this commit changes the validation to use the empty function.
* Revert #4b56ab452
The reason for the revert is thath the build broke on the ubuntu in the Github actions.
* Revert #e72e239a1
The reason the compilation on GitHub broke is that the test was weird, it didn't even run it, Common CI systems are typically very very resource-constrained.
* Resolve conflicts in the string-join.rst.
* Resolve conflicts in the "string-join.rst".
commit #1242d0fd7 not fixed all conflicts.
* Implement fish_wcstod_underscores
* Add fish_wcstod_underscores unit tests
* Switch to using fish_wcstod_underscores in tinyexpr
* Add tests for math builtin underscore separator functionality
* Add documentation for underscore separators for math builtin
* Add a changelog entry for underscore numeric separators
Otherwise this does "justify", which in bad cases can spread the text
over the width of the whole line, leaving awkward space between words.
This looks something like
```
The main file is ~/.config/fish/config.fish
```
The current python docs theme also left-aligns.
If a code block includes a line starting with ">", we assume it shows
an interactive session, all lines starting with ">" are commands and
the rest is output.
Unfortunately, in something like:
```
> for val in $PATh
echo "entry: $val"
end
entry: /usr/bin
```
this won't highlight the dangling lines. We could also prefix them
with `>`, but that require us to parse them in blocks or the `end`
would be an error.
So, for now, simply don't give these as a prompt but as a script with
cheesy comments describing the output.
Includes harmonizing the display of options and arguments, standardising
terminology, using the envvar directive more broadly, adding help options to all
commands that support them, simplifying some language, and tidying up multiple
formatting issues.
string documentation is not changed.
man(1) uses lowercase placeholders but we usually don't. Additionally,
the new synopsis autoformatting only recognizes placeholders if they
are uppercase. Use uppercase for all placeholders.
Recent synopsis changes move from literal code blocks to
[RST line blocks]. This does not translate well to HTML: it's not
rendered in monospace, so aligment is lost. Additionally, we don't
get syntax highlighting in HTML, which adds differences to our code
samples which are highlighted.
We hard-wrap synopsis lines (like code blocks). To align continuation
lines in manpages we need [backslashes in weird places]. Combined with
the **, *, and `` markup, it's a bit hard to get the alignment right.
Fix these by moving synopsis sources back to code blocks and compute
HTML syntax highlighting and manpage markup with a custom Sphinx
extension.
The new Pygments lexer can tokenize a synopsis and assign the various
highlighting roles, which closely matches fish's syntax highlighing:
- command/keyword (dark blue)
- parameter (light blue)
- operator like and/or/not/&&/|| (cyan)
- grammar metacharacter (black)
For manpage output, we don't project the fish syntax highlighting
but follow the markup convention in GNU's man(1):
bold text type exactly as shown.
italic text replace with appropriate argument.
To make it easy to separate these two automatically, formalize that
(italic) placeholders must be uppercase; while all lowercase text is
interpreted literally (so rendered bold).
This makes manpages more consistent, see string-join(1) and and(1).
Implementation notes:
Since we want manpage formatting but Sphinx's Pygments highlighing
plugin does not support manpage output, add our custom "synopsis"
directive. This directive parses differently when manpage output is
specified. This means that the HTML and manpage build processes must
not share a cache, because the parsed doctrees are cached. Work around
this by using separate cache locations for build targets "sphinx-docs"
(which creates HTML) and "sphinx-manpages". A better solution would
be to only override Sphinx's ManualPageBuilder but that would take a
bit more code (ideally we could override ManualPageWriter but Sphinx
4.3.2 doesn't really support that).
---
Alternative solution: stick with line blocks but use roles like
:command: or :option: (or custom ones). While this would make it
possible to produce HTML that is consistent with code blocks (by adding
a bit of CSS), the source would look uglier and is harder to maintain.
(Let's say we want to add custom formatting to the [|] metacharacters
in HTML. This is much easier with the proposed patch.)
---
[RST line blocks]: https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#line-blocks
[backslashes in weird places]: https://github.com/fish-shell/fish-shell/pull/8626#discussion_r782837750
The next commit will load another of our Python extensions from a
separate file. That extension will contain more than just a Pygments
lexer, so instead of using a function that can only load a lexer,
just import from the module to keep things consistent.
Keywords and options recently got dedicated highlighting roles in
b3626d48e (Highlight keywords differently, 2021-02-04) and
711796ad1 (Highlight options differently, 2021-10-19)
but still default to "command" and "parameter", respectively.
The dedicated roles were not colored by our CSS theme,
which makes a "test -f foo.txt" look weird:
- "test" is dark blue (since it's a command)
- "foo.txt" is light blue (since it's a parameter)
- "-f" is black (weird!)
The CSS theme doesn't support configuration, so the dedicated
highlighting roles should always default to their fallback
options. Make it so.
This corrects what looks like wrong alignment of some synopsis lines.
(I think the alignment is not a bad idea but it makes us do more
manual work, maybe we can automate that in future. We still need to
figure out how to translate it to HTML.)
"man -l build/user_doc/man/man1/history.1" before:
string match [-a | --all] [-e | --entire] [-i | --ignore-case]
[-r | --regex] [-n | --index] [-q | --quiet] [-v | --invert]
PATTERN [STRING…]
and after:
string match [-a | --all] [-e | --entire] [-i | --ignore-case]
[-r | --regex] [-n | --index] [-q | --quiet] [-v | --invert]
PATTERN [STRING…]
Also make the lines align the same way in the RST source by carefully
choosing the position of the backslash. I'm not sure why we used
two backslashes per line. Use only one; this gives us no choice
of where to put it so both source and man page output are aligned.
Change tabs to spaces to make the alignment in the source work.
The ellipsis is a grammar metacharacter, just like the []()|.
Write *FOO*… instead of *FOO…*, so the ellipsis is not underlined
in the man page. Not super sure about this one.
This matches the style in man(1) (except that we use the … ligature).
A previous iteration did the reverse (never use a space before the
ellipsis). That would be a smaller change.
We use plural "*OPTIONS*" more often than "*OPTION*...", so let's do
that everywhere.
In some other places where we do have an ellipsis, make sure to use
singular, since the ellipsis already means repetition. This change
is incomplete, and I'm not sure if this is worth it, since it's
subjective, so I might drop it.
Correct the grammar by moving the options after the command argument.
Also group the -c/--command and -p/--path pairs, to convey that the
short and long variants are equivalent.
While at it, consolidate the -C/--do-complete forms, like we usually
do.
One synopsis misrenders as
set [options] VARIABLE*[*INDICES]… VALUES…
Add a missing backslash to fix that. Also go back to uppercase
because I'm not sure why this was changed to lowercase.
Finally, remove the spurious ellipsis after VARIABLE[INDICES].
This element cannot be repeated. Multiple index values and ranges
can be specified but that's already implied by the plural INDICES.
For alteration we usually use "(a | b)", not "{a | b}".
While at it, instead of writing 4/6 subcommands in one line, write them
on separate lines, so it's very obvious that all these are separate
subcommands. We mainly use the (a | b) syntax for long/short options.
The -- is not special here and we don't mention it in other synopses.
It was originally added for a good reason in 98449fec5 (fix `math`
regression, 2017-07-14), along this addition to math.rst:
> You should always place a `--` flag separator before the expression. [...]
However, since 56d913453 (Cache math expressions, 2017-08-24) that
line was changed to
> You don't need to use `--` before the expression even if it begins with a minus sign [...]
Previously, when we got an unknown option with --ignore-unknown, we
would increment woptind but still try to read the same contents.
This means in e.g.
```
argparse -i h -- -ooo -h
```
The `-h` would also be skipped as an option, because after the first
`-o` getopt reads the other two `-o` and skips that many options.
This could be handled more extensively in wgetopt, but the simpler fix
is to just skip to the next argv entry once we have an unknown option
- there's nothing more we can do with it anyway!
Additionally, document this and clearly explain that we currently
don't transform the option.
Fixes#8637
Unfortunately the normal font families like "sans-serif" and
"monospace" are basically broken because the browser defaults are
decades old.
TODO: Inline code is barely distinguishable.
Unfortunately this removes the index also from the sidebar in other pages. This makes it basically inaccessible.
Maybe there is a way to not show it in the list at the bottom, but this isn't it. Maybe a manual list of pages instead of reusing the TOC?
This reverts commit b5a95317f0.
Use the remaining_to_disclose count to determine if all completions
are shown (allows consistent behavior between short and long completion
lists).
Closes#8485
Currently,
set -q --unpath PATH
simply ignores the "--unpath" bit (and same for "--path").
This changes it, so just like exportedness you can check pathness.
Unless we use "complete --require-parameter", we must say "-w32",
not "-w 32", because the second "32" is a positional argument.
Notably, old options do not have this behavior, which is a bit weird,
see #8465
Taken from a discussion in #8459
* fish_key_reader: Simplify default output
It now only prints the bind statement. Timing information and such is
relegated to a separate "verbose" mode.
* Adjust fish_key_reader docs
* Adjust tests
Unlike in other shells, for-loops do not set $status if
1. the loop count is zero, or if
2. the loop body consists of only commands like "set" that don't
set $status.
POSIX for-loops always set an exit status (they set 0 if no loop
iterations). Following that would be awkward because it would add a
lot of complexity in combination with the 2 special cases above.
Document that "for" behaves the same as "set": it will pass through
existing $status, and also the last child's $status.
See the discussion in #8409
Adding the underline in the list of sections makes them bleed
together, making it hard to discern where one ends and the other
begins.
In the body of the text we don't have that issue - multiple links are
rarely next to each other.
Fixes#8439
Unfortunately, currently :program: doesn't link to the program's page.
So we use the old-school :ref: again where we should link, i.e. for
everything that's not the program the current page is about.
Fixes#8438
Documents like fish-tutorial don't need the NAME portion below.
(they also shoudln't be in section 1! These should be section 7,
they aren't for programs.)
the manpage writer will skip NAME if given an empty sstring as
the description.
--
FISH-TUTORIAL(1) fish-shell FISH-TUTORIAL(1)
NAME
fish-tutorial - fish-shell tutorial
This fixes the indentation problem for the SYNOPSIS section by not
inserting the :: literal block. Format it the same way Sphinx does
their own manpages for commands.
Use more semantic markup, like :command:, so that commands are
highlighted in the man pages.
Split by sentence to give `man` a chance to ascertain lines.
Long-term, it should be possible to teach Sphinx to turn :command:s
into references and get us automatic links to articles for matching
cmds/*.
This introduces a new variable, $fish_color_option, that can be used
to highlight options differently.
Options are tokens starting with `-`, but only up to (and including!)
the first `--`.
Fixes#8292.
This uses a bit of javascript to add copy buttons, so you can directly
copy all the code in a given block to the clipboard!
For codeblocks without prompts, it just copies all the code, for
blocks with prompts, it copies all the lines after prompts, under the
assumption that that's the code to be executed.
It would give you *all* the lines, so the output wouldn't be
interleaved like it is in the html, but good enough.
The buttons appear on hover, so they aren't usable on phones, but
since you won't really have a clipboard on phones and I have no idea
how to make them not always in front of the text otherwise: Eh.
I'm not in love with the javascript here, but it'll do.
* commandline: Add --is-valid option to query whether it's syntactically complete
This means querying when the commandline is in a state that it could
be executed. Because our `execute` bind function also inserts a
newline if it isn't.
One case that's not handled right now: `execute` also expands
abbreviations, those can technically make the commandline invalid
again.
Unfortunately we have no real way to *check* without doing the
replacement.
Also since abbreviations are only available in command position when
you _execute_ them the commandline will most likely be valid.
This is enough to make transient prompts work:
```fish
function reset-transient --on-event fish_postexec
set -g TRANSIENT 0
end
function maybe_execute
if commandline --is-valid
set -g TRANSIENT 1
commandline -f repaint
else
set -g TRANSIENT 0
end
commandline -f execute
end
bind \r maybe_execute
```
and then in `fish_prompt` react to $TRANSIENT being set to 1.
That `find` example is a bit dated and awkward, and doesn't really fit
the section.
We also don't want to point people to `?` because we want to remove it.
* Add `set --function`
This makes the function's scope available, even inside of blocks. Outside of blocks it's the toplevel local scope.
This removes the need to declare variables locally before use, and will probably end up being the main way variables get set.
E.g.:
```fish
set -l thing
if condition
set thing one
else
set thing two
end
```
could be written as
```fish
if condition
set -f thing one
else
set -f thing two
end
```
Note: Many scripts shipped with fish use workarounds like `and`/`or`
instead of `if`, so it isn't easy to find good examples.
Also, if there isn't an else-branch in that above, just with
```fish
if condition
set -f thing one
end
```
that means something different from setting it before! Now, if
`condition` isn't true, it would use a global (or universal) variable of
te same name!
Some more interesting parts:
Because it *is* a local scope, setting a variable `-f` and
`-l` in the toplevel of a function ends up the same:
```fish
function foo2
set -l foo bar
set -f foo baz # modifies the *same* variable!
end
```
but setting it locally inside a block creates a new local variable
that shadows the function-scoped variable:
```fish
function foo3
set -f foo bar
begin
set -l foo banana
# $foo is banana
end
# $foo is bar again
end
```
This is how local variables already work. "Local" is actually "block-scoped".
Also `set --show` will only show the closest local scope, so it won't
show a shadowed function-level variable. Again, this is how local
variables already work, and could be done as a separate change.
As a fun tidbit, functions with --no-scope-shadowing can now use this to set variables in the calling function. That's probably okay given that it's already an escape hatch (but to be clear: if it turns out to problematic I reserve the right to remove it).
Fixes#565
For some reason I've seen one version of firefox use this over the one
we set in pydoctheme.css. Since we set it there in both light and dark
mode, this one should not be used.
This is opt-in through a new feature flag "ampersand-nobg-in-token".
When this flag and "qmark-noglob" are enabled, this command no longer
needs quoting:
curl https://example.com/thing?foo=bar&duran=duran
Compared to the previous approach e1570a4 ("Let '&' only separate as
the first char of a word"), this has some advantages:
1. "&&" and "&>" are no longer affected. They are still special, even
if used between tokens without spaces, like "echo bar&>foo".
Maybe this is not really *better*, but it avoids risking to annoy
users by breaking the old variant.
2. "&" is still special if at the end of a token, like in "sleep 1&".
Word movement is not affected by the semantics change, so Alt-F and
friends still stop at every "&".
Currently, if a "return" is given outside of a function, we'd just
throw an error.
That always struck me as a bit weird, given that scripts can also
return a value.
So simply let "return" outside also exit the script, kinda like "exit"
does.
However, unlike "exit" it doesn't quit an interactive shell - it seems
weird to have "return" do that as well. It sets $status, so it can be
used to quickly set that, in case you want to test something.
Still not happy with this, it's overwhelming!
Might have to split this into two - one with simple paths and rough
descriptions, and one with the full scoop for experts?
For builtins that have the same name as common commands, it might not
be entirely obvious that there is another page.
So, for those builtins, we add a note, but only in the man pages.
(exception is true and false because the note would be longer than the
page, and it's fridging true and false)
Fixes#8077.
`fish_config theme`:
- `list` to list all available themes (files in the two theme
directories - either the web_config/themes one or
~/.config/fish/themes!)
- `show` to show select (or all) themes right in the terminal - this
starts another fish that reads the theme file and prints the sample
text, manually colored
- `choose` to load a theme *now*, setting the variables globally
- `save` to load a theme and save the variables universally
- `dump` to write the current theme in .theme format (to stdout)
- `demo` to display the current theme
Instead of having a toctree after the "index", just append the
important documents directly. Having one pdf file with different
chapters and sections and such feels better.
This allows
sphinx-build -blinkcheck . /dev/null
To be used without getting rate-limited to hell by github because the
release notes include hundreds of links to our own issues. Just assume
all issue numbers are valid.
pdflatex simply doesn't cut it.
This still results in an awkward pdf that starts with "Further
Reading" (the intro section is placed before it, but doesn't have a
chapter marker!) and ends with a massive "Other help pages" chapter
that includes *the entire rest of the docs*.
But it's generally readable and acceptably formatted (with a lot of
empty pages in between).
* string: Allow `collect --no-empty` to avoid empty ellision
Currently we still have that issue where
test -n (thing | string collect)
can return true if `thing` doesn't print anything, because the
collected argument will still be removed.
So, what we do is allow `--no-empty` to be used, in which case we
print one empty argument.
This means
test -n (thing | string collect -n)
can now be safely used.
"no-empty" isn't the best name for this flag, but string's design
really incentivizes reusing names, and it's not *terrible*.
* Switch to `--allow-empty`
`--no-empty` does the exact opposite for `string split` and split0.
Since `-a`/`--allow-empty` already exists, use it.
First, I changed "the escape key" to :kbd:`Esc`. This makes this information
easier to find when scanning the docs because it stands out and because it is
more consistent with the docs's formatting of keyboard keys.
Additionally, emphasize that escape/page-down can be used to edit
the original search sting.
Finally, I added a link from the FAQ to history-search to make this mechanism
easier to discover.
This was all to address confusion in former zsh and bash users as to how to
edit a search that is in progress, but this will also help new users. See
https://github.com/fish-shell/fish-shell/pull/6686#issuecomment-872960760
Especially in dark-mode this was often too close to the background.
Should make it easier to read.
As always, colors not checked for artistic merit for I have none.
This introduces two functions to
- toggle a process prefix, used for adding "sudo"
- add a job suffix, used for adding "&| less"
Not sure if they are very useful; we'll see.
Closes#7905
This set "clear: both", which resulted in code blocks sometimes being
pushed down a lot, resulting in weird empty space.
Just undo it, I have no idea why it's there, presumably it makes sense
with sphinx' stock theme?
This spoke of "--bold" and "-b", which are two different things - "-b"
is short for "--background", bold is "-o".
Instead let's just mention the long versions of all the switches.
See #8053.
A bunch of our variables are only relevant for interactive use, but
this is two whole sections on them. Simply move them inside "Syntax
highlighting" and leave the link in Special Variables.
* Try to set LC_CTYPE to something UTF-8 capable
When fish is started with LC_CTYPE=C (even just effectively, often via
LC_ALL=C!), it's basically broken. There's no way to handle non-ASCII
characters with a C locale unless we want to write our
locale-independent replacements for all of the system functions.
Since we're not going to do that, let's try to find *some locale* for
LC_CTYPE.
We already do that in __fish_setlocale, but that's
- a bit of a weird thing that reads unstandardized system
configuration files
- allows setting locale to C explicitly
So it's still easily possible to end up in a broken configuration.
Now, the issue with this is that there is (AFAICT) no portable way to
get a list of all allowed locales and C.UTF-8 is not standardized, so
we have no one locale to fall back on and are forced to try a few. The
list we have here is quite arbitrary, but it's a start.
Python does something similar and only tries C.UTF-8, C.utf8 and
"UTF-8".
Once C.UTF-8 is (hopefully) standardized, that will just start
working (tm).
Note that we do not *export* the fixed LC_CTYPE variable, so external
programs still have to deal with the C locale, but we have no real
business messing with the user's environment.
To turn it off: $fish_allow_singlebyte_locale, if set to something true (like "1"),
will re-run the locale initialization and skip the bit where we force
LC_CTYPE to be utf8-capable.
This is mainly used in our tests, but might also be useful if people
are trying to do something weird.
Chrome says that's better, presumably because it can then tell how
large the image is before it's loaded. Not that this tiny image really
is a massive problem, but let's be good, not acceptable.
This led to pydoctheme.css being included *twice*, which led to
everything it included being included twice, which was annoying in
firefox when playing with the styles.
I don't *think* it had any performance impact?
The file is called "config.fish", not "init.fish". We'll call it
"configuration" now.
"Initialization" might be slightly more precise, but in an irritating
way.
Also some wording improvements to the section. In particular we now
mention config.fish *early*, before the whole shebang.
Otherwise there's this weird *gap*, where the sections are narrow even
tho there's plenty of space?
So you have this screen layout:
```table
| sidebar | text |
| sidebar | narr |
| sidebar | ower |
| sidebar | than |
| sidebar | need |
| sidebar | ed |
```
For some gosh-forsaken reason.
Prior to this change, a function with an on-job-exit event handler must be
added with the pgid of the job. But sometimes the pgid of the job is fish
itself (if job control is disabled) and the previous commit made last_pid
an actual pid from the job, instead of its pgroup.
Switch on-job-exit to accept any pid from the job (except fish itself).
This allows it to be used directly with $last_pid, except that it now
works if job control is off. This is implemented by "resolving" the pid to
the internal job id at the point the event handler is added.
Also switch to passing the last pid of the job, rather than its pgroup.
This aligns better with $last_pid.
This is an attempt to make these more visible - the intro section
explains what this is, and then we mention where to go, and after that
we go into installation and stuff.
I don't think putting "where to go" *after* the installation
instruction is correct, but maybe it is? For the time being, we keep
the order as it is.
fish_private_mode is active if set to something non-empty, but the docs
suggested checking if it is set at all. Switch the docs to match the
implementation through `test -n "$fish_private_mode"`
Fixes#8001
Apparently new sphinxen want to create an *additional* section
directory, so things end up in /usr/share/fish/man/man1/1, instead of /usr/share/fish/man/man1
Why? No idea.
I can't reproduce it but I'm told this section fixes it.
Fixes#7996
It's a bit weird to *have* to fire up a browser to get fish_config to
choose a prompt.
So this adds a `prompt` subcommand to `fish_config`:
- `fish_config prompt list` shows all the available prompt names
- `fish_config prompt show` demos the available sample prompts
- `fish_config prompt choose` sources a prompt
- `fish_config prompt save` makes the choice permanent
A bare `fish_config` or `fish_config browse` opens the web UI.
Part of #3625.
TODO: This shows the right prompt on a new line. Showing it in-line is awkward
to do because we'd have to move it to the right.
This prints a description of the "host". Currently that's
`(chroot:debianchroot) $USER@$hostname`
with the chroot part when needed.
This also switches the default and terlar prompts to use it, the other
prompts have slightly different coloring or logic here.
When building the docs with an old sphinx (like e.g. on Debian), this
would break links in the search results.
This happens because we've nabbed the searchtools.js from a sphinx to
add our special handling of short builtins like "and", "end", "cd" (as
part of #7757).
I don't believe this will change *a lot* in practice, so it's probably
still okay, but this hack is still worthwhile.
See #7946
Otherwise this would look ugly by stopping the gradient after the
content, so in e.g. the `end` or `false` page it would leave an ugly stripe at
the bottom.
* math: Make function parentheses optional
It's a bit annoying to use parentheses here because that requires
quoting or escaping.
This allows the parens to be omitted, so
math sin pi
is the same as
math 'sin(pi)'
Function calls have the lowest precedence, so
math sin 2 + 6
is the same as
math 'sin(2 + 6)'
* Add more tests
* Add a note to the docs
* even moar docs
Moar docca
* moar tests
Call me Nikola Testla
It's not super clear what $SHLVL is useful for, but the current
definition is essentially
"number of shells in the parent processes + 1"
which isn't *super useful*?
Bash's behavior here is a bit weird in that it increments $SHLVL
basically always, but since it auto-execs the last process it will
decrement it again, so in practice it's often not incremented.
E.g.
```
> echo $SHLVL
1
> bash -c 'echo $SHLVL; bash'
2
>> echo $SHLVL
2
```
Both bashes here end up having the same $SHLVL because this is
equivalent to `echo $SHLVL; exec bash`. Running `echo $SHLVL` and then
`bash -c 'echo $SHLVL'` in an interactive bash will have a different
result (1 and 2) because that doesn't *exec* the inner bash.
That's not something we want to get into, so what we do is increment
$SHLVL in every interactive fish. Non-interactive fish will simply
import the existing value.
That means if you had e.g. a bash that runs a fish script that ends up
opening a new fish session, you would have a $SHLVL of *2* - one for the
bash, and one for the inner fish.
We key this off is_interactive_session() (which can also be enabled
via `fish -i`) because it's easy and because `fish -i` is asking for
fish to be, in some form, "interactive".
That means most of the time $SHLVL will be "how many shells am I deep,
how often do I have to `exit`", except for when you specifically asked
for a fish to be "interactive". If that's a problem, we can rethink it.
Fixes#7864.
This breaks apart the massive "index" document into
1. An "index" document that explains how to install and set up fish
and links to the other documents
2. A "fish-language" document that describes the syntax and semantics
of the language
3. A "fish-interactive" document that describes how to use fish
interactively
No change to the content has been made, only the parts have been moved
from index and some of the formatting (links and header levels) were
fixed.
See #7348.
Unlike links, these are checked by sphinx and it complains if they
don't match.
Also they have a better chance of doing something useful in outputs
other than html.
The "classic" theme is a mostly useless wrapper around the basic theme
that just adds a collapsible sidebar (that we no longer have).
Moving to basic directly drops a layer of indirection and a file that
needs to be transferred over the net.
Same thing goes for "default.css" which literally just includes
classic.css (WHYYYY???)
(also this removes some useless javascript)
Unfortunately this has both stopwords and a length limit, and things
like "and" just are tough to search.
So what we do is leave everything as it is, but when a search fails,
we show a list of things that are hard to search for, currently that's
"and", "for", "if" and such.
Fixes#7757.
The user may write for example:
echo foo >&5
and fish would try to output to file descriptor 5, within the fish process
itself. This has unpredictable effects and isn't useful. Make this an
error.
Note that the reverse is "allowed" but ignored:
echo foo 5>&1
this conceptually dup2s stdout to fd 5, but since no builtin writes to fd
5 we ignore it.
After commit 6dd6a57c60, 3 remaining
builtins were affected by uint8_t overflow: `exit`, `return`, and
`functions --query`.
This commit:
- Moves the overflow check from `builtin_set_query` to `builtin_run`.
- Removes a conflicting int -> uint8_t conversion in `builtin_return`.
- Adds tests for the 3 remaining affected builtins.
- Simplifies the wording for the documentation for `set --query`.
- Does not change documentation for `functions --query`, because it does
not state the exit code in its API.
- Updates the CHANGELOG to reflect the change to all builtins.
builtin_set_query returns the number of missing variables. Because the
return value passed to the shell is an 8-bit unsigned integer, if the
number of missing variables is a multiple of 256, it would overflow to 0.
This commit saturates the return value at 255 if there are more than 255
missing variables.
This introduces a new variable $fish_color_keyword that will be used
to highlight keywords. If it's not defined, we fall back on
$fish_color_command as before.
An issue here is that most of our keywords have this weird duality of
also being builtins *if* executed without an argument or with
`--help`.
This means that e.g.
if
is highlighted as a command until you start typing
if t
and then it turns keyword.
E.g. autoloading and aliases are both about functions, variable scope
and overrides are both about variables.
It makes sense to group these together, and this might allow us to
collapse some of the TOC later.
Also move abbr explanation to interactive use (as abbrs are purely an
interactive concept)
(also add an example to tilde expansion, not making a separate commit
for that)
This goes to a separate file because that makes option parsing easier
and allows profiling both at the same time.
The "normal" profile now contains only the profile data of the actual
run, which is much more useful - you can now profile a function by
running
fish -C 'source /path/to/thing' --profile /tmp/thefunction.prof -c 'thefunction'
and won't need to filter out extraneous information.
This allows us to flex them together, so now you get one column on the
left with the title "Documents" and one on the right saying
"Sections" on narrow screens.
On wide screens it doesn't say "Table Of Contents" twice.
This should make it clearer
This used to put the TOC last, which is the last place you'd want it.
It's not perfect and we do some hacky layoutery to achieve it, but it
should generally be usable.
This makes the *tables* themselves scrollable, not the section div
they are in, which means the section doesn't scroll along with
them (it's already reflowed).
We should typically avoid scrolling even at max-width.
An exception here is the output of `functions` - this prints one very
long line, but it's really not important what's in there specifically,
it's just to illustrate the kind of output you'd get.
This clips overflowing padding/margins and thereby removes
non-"content" that's just off-screen, making the site scrollable.
The exception here is for tables - we allow scrolling the *section*
divs for those (because I have no idea how to only make the <table>
scrollable), if necessary of course.
This came up online - here we exclaim that fish has no aliases (which
is true), but then in the main docs we explain that you can use
`alias` to make something (which is also true).
Add a foot note explaining the apparent contradiction.