Use the remaining_to_disclose count to determine if all completions
are shown (allows consistent behavior between short and long completion
lists).
Closes#8485
Cargo subcommand extensions don't provide a description in `cargo --list`,
the regex used to filter this list ignored lines without a description.
This change fixes that.
A completion entry like «complete -a '\\~'» results in completions
that insert \~ into the command line. However we usually want to
insert ~, but there is no way to do that.
There are a couple of longstanding issues about completion escaping
[1]. Until we fix those in a general way, fix the common case by
never escaping tildes when applying custom completions to the command
line. This is a hack but will probably work out fine because we don't
expect literal tildes in arguments.
The tilde is included in completions for cdh, or
__fish_complete_suffix, which simply forwards results from "complete
-C". Revert a workaround to cdh that expanded ~, because we can now
render that without escaping.
Closes#4570, #8441
[ja: tweak patch and commit message]
[1]: https://github.com/fish-shell/fish-shell/pull/8441#discussion_r748803338
* Rename pabcnetcclear complete
* Code clean-up
* Debug values support
* Change /Debug description
* Standardize help
* Use single quotes for --arguments
We only need the curses module to look up sgr0, bold and underline
sequences.
Since those are going to be the xterm versions 90% of the time, we can
simply use those if this fails.
Fixes#8487.
* Add findstr completion
* Standardize completion
* Show completion only on Windows
* Use single quotes where possible
* Remove quotes where possible
* Remove OS check
* Use single quotes for --arguments
This looked at __fish_print_commands, which goes via our man pages to
find the commands (it shouldn't, buuut), and exludes a hard-coded list
of pages.
So we do two thigns:
1. We add the other doc pages to the list
2. We check commands *later* - if we listed something explicitly it
should be used
This was "--authoritative" (and unauthoritative). It was meant to make
fish mark everything that couldn't be generated via the completions as
an error, it was removed years ago and has been a no-op since then.
This behavior matches the way completions are found for `cargo run`,
`cargo test`, etc., and is more robust and correct compared to looking
at filenames.
This was supposed to act like `type -q` or `command -q`, in that it
returns 0 if at least 1 exists.
But because it used the wrong variable it didn't.
Fixes#8431.
Foot has several terminfos:
* foot - the default one
* foot-direct - 24-bit color terminfo, similar to xterm-direct (used by e.g. emacs)
* foot-extra - alternative to the ncurses provided terminfo, with a couple of extra, non-standard
capabilities
* foot-extra-direct - 24-bit color version of the above
There may also be other distro-custom terminfo names (serving the same purpose as foot-extra*)
Otherwise, with a light-theme, the selected entry uses black text with
"bright black" background, which can be low contrast thus hard to read.
The description background is different, maybe we can fix that later.
See #8376
This is nroff/groff being broken. It turns "→" into "â". This is even if we select `-Tutf8` and friends.
So, if mandoc exists, we prefer that, and otherwise, run preconv on
the file first (if it exists).
Really, what we would need to to is tell nroff to pass `-KUTF-8` to
groff, but that doesn't appear to be possible.
- Introduce BUILTIN_ERR_COMBO2_EXCLUSIVE
- Distill generally more terse, unambiguous error descriptions.
Remember English is not everyone's language.
- Do not capitalize sentence fragments
- Use the modality where problem input is in a %s: prefix, then
is explained.
- Do not address the user (the "You cannot do ..." kraderism)
- Spell out 'arguments' rather than 'args' for consistency
- Mention 'function' as a scope
This basically disables syntax highlighting. That doesn't mean we use
absolutely no colors - the search match, suggestion, selection and the
pager have coloring, but only reverse or brblack.
The idea is that this disables anything that tells you about
the *syntax*, but it still tells you about the state of the
commandline. If we didn't highlight the selection it would be entirely
invisible, and if we didn't highlight the suggestion you would have no
idea where it begins.
So this basically brings colors on-par with bash, where the search
match is colored (in reverse) and suggestions aren't a thing.
An alternative is to add a $fish_highlighting_enabled variable like
the one for suggestions. That's still possible, but would require some
internal changes to avoid coloring some things with $fish_color_normal
and other things with the normal terminal color.
One thing this also does not do is set the git prompt colors. These
are currently disallowed from being set in theme files because they
start with `__fish` instead of just `fish`. We should probably rename
them.
This program uses the Cobra framework for argument parsing and completion generation.
Just source the completions supplied by upstream.
This works around "go install" not being able to install completions files (only binaries).
Usually local branches have remote branches with the same name, and in
completion they are currently overshadowed by unique remote branches, making
local branches hard to find. Define local branch completion after unique
remote branch completion to show local branches before unique remote branches.
If $xdg_chache_home is empty, this is not a valid fish expression:
[ \( -z \) -o \( ! -d \) ]
and results into an error.
While at it, also use $XDG_CACHE_HOME if that directory does not exist.
This seems better than falling back to $HOME/.cache, which the user has
explicitly overridden via $XDG_CACHE_HOME.
In 'simple terminal' the delete key prints \e[P by default, which is
related to the different approach the authors of st are taking on the
matter of shell configuration. The main problem is the malfunction of
the delete key, so we have to use a workaround like this.
Suggest files to "man -l", but only if the "-l" option is supported
(so not on BSD). Technically we should accept multiple files but this
seems good enough.
Also suggest files when the token-at-cursor contains a slash, because
man will treat arguments as file paths if they contain a /.
git-status --porcelain prints status letter T when a file changed type
between either regular file, symlink or submodule. It can occur in
exactly the same cases as M (modified), so extend the fix for #8311
accordingly.
For submodules, our completions are probably not always correct,
hopefully those cases are rare.
This is weirdly undocumented (as of git 2.33.0), but `git status` prints a "T" state if
the file has its "T"ype changed, e.g. from a regular file to a symlink.
For our purposes that's just another kind of modification.
Fixes#8311.
* Hide whatis database building from the user
It's really an internal detail, but shows up in prompts that display how many
background jobs are running.
By disowning it keeps running but won't show up in `jobs` or get killed if the user
exits the shell.
* Update __fish_apropos.fish
The less -F / --quit-if-one-screen option is buggy before v530. To work
around this, pass --no-init less versions older than 530.
The --no-init option was previously passed; it was removed in d15a51897d
for mouse support. Unfortunately it looks like we can't have mouse
support and --quit-if-one-screen on macOS shipped less (version 487).
It's worth fixing this because otherwise history and help is just not
printed on stock macOS.
Relevant is https://unix.stackexchange.com/questions/107315/less-quit-if-one-screen-without-no-initFixes#8157.
Commit c3374ffd0 ("Use read --tokenize instead of eval for $BROWSER &
$EDITOR") converted uses of "eval" for environment variables to use the
safer "read -at", which performs word splitting but no other expansion.
funced contained a leftover instance of "eval". Remove it in favor
of using the editor command that was already word-split.
This means that we don't accidentally evaluate the file name.
(Also "set -gx EDITOR=~/my-editor" won't work anymore because the ~
is not expanded anymore but no one has complained about that behavior
in edit_command_buffer.)
Fixes#8289
*Problem:*
edit_command_buffer uses `cat` to return the modified content.
If a person has an alias for `cat` to a different command such `bat`** the editing will not be useful anymore since bat decorates the text with frames, line counts, etc
*Solution*
Appending command to cat, fish will ignore the alias and execute the real command according to this https://fishshell.com/docs/current/cmds/command.html
** https://github.com/sharkdp/bat
* Fix ls.fish: add -l option to GNU ls
* Sort alphabetically and remove --lcontext and --scontext (what are these?) on shared and GNU part.
* Revert --lcontext and --scontext options.
This should add all the sections that aren't linked internally,
including "identifiers".
(also give up on the line breaking because it makes it annoying to do
automatically)
Fixes#8245.
This was semi-automated with
```fish
for file in $argv
set -l varname (string replace -r '.*/(.*).html' '$1' -- $file | string escape --style=var)pages
set -l sections (string replace -rf '.*class="headerlink" href="#([^"]*)".*' '$1' <$file)
echo set -l $varname $sections
end
```
(where $argv contains the path to faq, fish_for_bash_users,
interactive, language and tutorial.html)
Building help.fish at compile time would work, but only for users who
build the docs.
The same hack that is used for `pkg remove <foo>` is required here, too.
Due to the massive number of results, we use `head -n 250` to prevent
the completion from hanging or the shell from being overencumbered by
too many possibe completions. However, this would only generate matches
for any of the first 250 packages, rather than printing the first 250
packages that match.
[ci skip]
As functions know where they are loaded from now, there is no point in
them being marked as loaded from a temporary file that has been removed.
Source the function via a redirect instead.
support for ping from iputils (version 20210202)
support for ping from inetutils (version 2.1)
support for ping from busybox (version 1.33.1)
support for ping from FreeBSD and macOS (by @juntuu)
Ubuntu's fish package on WSL 1 has xsel as recommended dependency,
even though there is no X server available. This change makes us
use Windows' native clipboard even when xsel is installed.
We keep __fish_is_nth_token for compatibility and edit the
implementations of __fish_is_nth_token, __fish_is_first_token and
__fish_is_token_n to use fish_is_nth_token
Using `complete -F -c git -n __fish_git_needs_subcommand -a $command -d
$description` causes file completions to be forced on entire git command
which is not a desired result. Morever without the `-F` flag file
completions work just as expected and is useless addition
This injected filenames into fish script, which could inject things
that looked like fish script.
E.g. create a file called `~/.config/fish/themes/"; rm -rf ~/*"`.
Note that the prompts are all shipped by us, but the themes can
technically be added by the user, and they might not be dilligent in
what filenames they allow.
`fish_config theme`:
- `list` to list all available themes (files in the two theme
directories - either the web_config/themes one or
~/.config/fish/themes!)
- `show` to show select (or all) themes right in the terminal - this
starts another fish that reads the theme file and prints the sample
text, manually colored
- `choose` to load a theme *now*, setting the variables globally
- `save` to load a theme and save the variables universally
- `dump` to write the current theme in .theme format (to stdout)
- `demo` to display the current theme
In the variable handler, we just go through the entire thing and keep
every element once.
If there's a duplicate, we set it again, which calls the handler
again.
This takes a bit of time, to be paid on each startup. On my system,
with 100 already deduplicated elements, that's about 4ms (compared to
~17ms for adding them to $PATH).
It's also semantically more complicated - now this variable
specifically is deduplicated? Do we just want "unique" variables that
can't have duplicates?
However: This entirely removes the pathological case of appending to
$fish_user_paths in config.fish (which should be an FAQ entry!), and the implementation is quite simple.
* Add initial completion for Angular CLI
* Remove completion for `ng completion`
The `ng completion` doesn't exist. The completiond were autogenerated
using a script. See angular/angular-cli#21085
* Use shorter wording
* Fix typos
These are simple
var val [val val]
files. Basically the bit in `set -g fish_color_escape 86c1b9` after
the `set -g `. Since we're not going to `source` them, however,
arbitrary code and expansions are unsupported.
Also comments and such don't currently work.
This allows them to be easily readable both from webconfig (next
commit) and the shell (later).
This used to pass each color in a separate url-encoded request, which is
just wasteful.
Also it passed separate parameters for modifiers like bold and
underlined, but never gave them actual values. Instead the color is
passed as one string.
So we just use json, and then iterate over it server-side.
This introduces two functions to
- toggle a process prefix, used for adding "sudo"
- add a job suffix, used for adding "&| less"
Not sure if they are very useful; we'll see.
Closes#7905
I almost always use this on the last/only job in a commandline, so
the semicolon is usually not needed. We have always added it but I
prefer not dropping it: this feels cleaner because it's what you'd
type without the shortcut.
Similarly to b0e3cc4b5 (__fish_complete_suffix: Remove `eval`,
2019-12-28), this use of eval is unsafe and can spew errors if
invoked on an incomplete brace expansion.
Commit d15a51897 ("Rationalize $LESS uses") switched a "less" flag
from -r (interpret all control characters)
to -R (interpret only color codes)
Somehow this changed the output of "fish -c 'command -h'" to include
weird characters:
DESCRIPTION^O
command^O forces the shell to execute the program COMMANDNAME^O and ignore any functions or builtins with the same name.
Probably this was the reason why I originally used -r over -R. Anyway,
-R is safer and it looks like we can just remove the "ul" preprocessing
since "less" will interpret bold/underline just fine.
The `__fish_git_unique_remote_branches` function isn't applicable here
since `git describe` won't know what to do with a remote branch without
the remote prefix. For example, if there is a branch called
`origin/my-branch`, you can't execute `git describe my-branch` until the
branch is checked out locally. In other words:
Good: `git describe origin/my-branch`
Bad: `git describe my-branch`
Good: `git switch my-branch; git describe my-branch`
The completions for the `--example` option are generated using `find`.
The `find` utility on macOS will produce the following output when the
path argument has a trailing slash:
```
~/bat $ find ./examples/
./examples/
./examples//cat.rs
./examples//advanced.rs
./examples//simple.rs
./examples//list_syntaxes_and_themes.rs
./examples//yaml.rs
```
And will produce this output if the path does NOT have a trailing slash:
```
~/bat $ find ./examples
./examples
./examples/cat.rs
./examples/advanced.rs
./examples/simple.rs
./examples/list_syntaxes_and_themes.rs
./examples/yaml.rs
```
The extra slash after `examples` ends up in the completion suggestions
which is incorrect:
```
~/bat $ cargo run --example <TAB>
/advanced /cat /list_syntaxes_and_themes /simple /yaml
```
Unlike on my Linux box where `find` doesn't output the trailing slash:
```
~/bat $ cargo run --example <TAB>
advanced cat inputs list_syntaxes_and_themes simple yaml
```
Importantly, I get the same (correct) output on Linux even without the
trailing slash in the path argument to `find`.
This can give false positives but only if used on directories that
mix tracked and untracked files. The performance is better than
listing all tracked files, and in any case we're pretty far from a
correct solution that knows the target Git commit, so this seems like
good compromise.
The buttons were already supposed to highlight on hover, but the color
difference was barely visible. Crank that up.
Also add a hover color to the tabs, colorschemes, prompts, functions.
The big clickable things.
This made the current prompt appear directly under the tab,
disregarding the padding.
That means it looked inconsistent with the colors. (note there's still
less padding on the side, but at least that allows more actual content
- prompts are often fairly wide)
This has one slight behavioral change: Even with xsel, it now copies
to the clipboard, not the primary. I would imagine anyone who cares
about the primary selection has customized fish_clipboard_copy and
because we never got a bug about this not supporting anything but
xsel (and errorring out if it's not available!) this is probably
unused.
So now we support all the clipboard integration things, and we use the clipboard.
This change adds a binding that sets the s key's behaviour to match
the c key's in visual mode. This mirrors vim's behaviour (see `:h v_s`
in vim or neovim).
Apart from OpenBSD's "colorls" that is basically an ls that can do
color, there's also a ruby tool called "colorls" that's closer to exa.
Ignore that one since the options it understands are quite different
and I'm betting it's slower (given my experience with ruby tools).
See #8042.
* add support for colorized ls on openbsd
* add changelog line for colorls support
* add readme line for colorls support
* determine ls command at runtime, don't cache it
* eliminate __fish_ls_command function
Stop using "--no-init"/"-X" because we have no actual reason to and it
may break mouse initialization on my best friend macOS.
Use --RAW-CONTROL-CHARS, the capital version that only lets through
specific escape sequences, not *everything* - we shouldn't have
anything weird here, but less heavily discourages the other version.
Allow a user's $LESS to override.
Fixes#7997.
In such cases, `pacmd help` prints
No PulseAudio daemon running, or not running as session daemon.
to stderr, which ends up printed to the user terminal.
This isn't really a "locale" variable as such. It has no effect on
encoding and stuff, it's just the output language.
What we really want here is get something better than the awkward "C"
or "POSIX" for LC_CTYPE specifically - everything else doesn't really
matter.
Recently Safari seems to hang with fish webconfig. This is apparently
because Safari is opening a socket and not writing to it, causing
webconfig to hang until the timeout (30 seconds). It's not clear why.
Use ThreadingMixIn so that FishConfigTCPServer can handle more
than one connection at a time. This fixes the hang under Safari.
From my checks (gnome-terminal with the "gnome light" colorscheme)
this seems to be the only color that's barely visible in a light
terminal, and it's the only color mentioned in both bug reports.
I'm leaving the artistic decisions to others, this is now *acceptable*
in both.
Note that, because we use universal variables here (hint #7317), this
will only be changed for preexisting installations when the user
reloads the colorscheme.
Fixes#3412Fixes#3893
It's a bit weird to *have* to fire up a browser to get fish_config to
choose a prompt.
So this adds a `prompt` subcommand to `fish_config`:
- `fish_config prompt list` shows all the available prompt names
- `fish_config prompt show` demos the available sample prompts
- `fish_config prompt choose` sources a prompt
- `fish_config prompt save` makes the choice permanent
A bare `fish_config` or `fish_config browse` opens the web UI.
Part of #3625.
TODO: This shows the right prompt on a new line. Showing it in-line is awkward
to do because we'd have to move it to the right.
Because MacOS' apropos is bad and doesn't support the `--` option
separator, this apparently spews errors.
Because the argument _can't_ start with a `-` (because we add a `^`),
we can just remove it.
Fixes#7965.
This prints a description of the "host". Currently that's
`(chroot:debianchroot) $USER@$hostname`
with the chroot part when needed.
This also switches the default and terlar prompts to use it, the other
prompts have slightly different coloring or logic here.
These were hard to read in the browser, but not in the terminal.
The palette in color.cpp lists #000080 for blue, which is *even darker*. I'm not sure if that's actually a thing - I was under the impression that table was taken from xterm.
Either way, listing it in this color doesn't do anyone any favors. It's just a rough approximation anyway.
Otherwise this has filesystem order, which on my system is quite
chaotic.
An alternative would be to randomize the order so people see different
prompts each time.
Some features:
- A nice `►` prompt char with a fallback for non-utf8 systems
- The $PWD is colored depending on its sha, so different directories
are colored differently, but each directory stays the same
- User@Host is only shown if not on the local machine (ssh or
virtualization)
- A right prompt with a nice git display, date, duration of the last
command (if it took over 100ms), and virtualenv
This gets fish to print the right prompt of any sample if it has any,
and then shows it separately.
If there is a right prompt, it will also save it. If not, it will *not* overwrite an existing right prompt.
This called `uname` just to check if we *should* shorten "cygdrive"
directories.
That's more annoying than just doing it by default - on my system `pwd
| string replace` takes about 100 *micro*seconds, and this is done
once per prompt. Anyway, using $PWD further speeds it up to ~30
microseconds (compared to 10-20 for just `pwd`). This is hard to
measure because it's heavily impacted by system hitter.
The alternative is to ask cygwin to ship this feature as a patch.
Complete RPM files instead of pacakges if there is either
1. a slash in the token, which precludes package names
2. no matching package
To enable 2, pass the commandline token to the dnf query, instead of
an undefined variable. This allows SQL injection; not sure if we care.
We could always complete RPM files but maybe that's too noisy.
Also, isn't that what the "rpm" command is for?
Closes#7928
Fixes#7926.
Also switches the default status order for non-informative to the informative one:
stagedstate invalidstate dirtystate untrackedfiles stashstate
instead of
dirty staged stash untracked
This should be a simple prompt that doesn't place a huge strain on the
system but communicates the most important information simply and
effectively.
It should be a good jumping off point for making your own prompt.
Unless that person directly contributed the prompt.
We name them after a feature - the Scales prompt feature a ">>>" which
kinda looks like fish scales, the "Arrow" prompt starts with a
prominent "➜".
Naming them after people looks like an endorsement of that particular
person, and like they are someone to look up to, especially when they
aren't involved with the project.
The "terlar" and "acidhub" prompts stay for now because they
contributed the prompt themselves, they are also much less prominent.
The "classic" prompts are all just variations on a theme, let's just
keep the default classic+vcs.
"Justadollar" is very unlikely to be what you want and also trivial to
write yourself.
I have no idea what screen_savvy even is for - it reacts to "$WINDOW",
but I don't know anything that even uses that variable.
Lonetwin is just unremarkable, and the debian chroot prompt has one special feature that should be integrated into the other prompts.
Because macOS' `apropos` is just using grep, and we only need
a prefix match for __fish_describe_command, we can shave off
some ok total execution time here.
No longer uses the __fish_apropos hack on every version of macOS.
Juat Catalina+.
The whatis database generated and replaced daily is 2 megabytes on
my computer, and in ~/.cache on a home dir might wind up on a net
mount or something annoying. or, definitely it's backed up by default.
It's wiser to throw that junk in with other cache files on the system
aka DARWIN_USER_CACHE_DIR, and only use the XDG directory if
someone specifically configured that.
Mainly, this just means at least it won't automatically get backed
up by Time Machine and stuff every day, which is no big deal but
y'know...
Rearranged stuff a little to not shell out every time.
The default vi mode prompt is kind of ugly, mostly because we include
this `[I]` with a super bright green background and white text,
which is particularly grating because most prompts don't actually have
a background.
So we get a ton of people asking "How do I remove this [I]" when they
could really benefit from having the mode shown.
There's a few ways to make this look nicer, the simplest is to just
keep the same colors but use them as foreground instead of background
colors, which looks much more understated.
The mode prompt is important, but not more than the actual contents of
the commandline, so it shouldn't have ALARMING colors.
This allows us to stop descending into untracked directories, which
can be faster.
It's still not *good* - git can still be quite slow here, but if
there's an untracked directory you probably don't care about the
number of files in that.
Fixes#7871.
This is all of the sections in interactive, language and for_bash_users.
The faq names are so long that we're not adding them, also not all of
these have descriptions yet.
Given that we no longer have that massive "index" page with
everything, it's become harder to open the correct section
immediately.
So this hardcodes the section titles for each page in help itself.
This was half-automated with
grep -o 'a class="headerlink" href="#[^"]*"' /usr/share/doc/fish/faq.html | sort -u | string replace -r '.*#' '' | string trim -c '"'
The completions still need to be adjusted.
In vim p means paste *after* current character, so go forward a char before pasting.
Also in vim, P means paste *at* current position (like at '|' with cursor = line),
so there's no need to go back a char, just paste it without moving.
Prior to this commit "builtin -h" would silently fail when no
documentation is installed. This happens when running fish without
installing it, or when the docs are not installed.
See #7824
After a fish installation is upgraded to 3.2.0, active shells could
throw an error attempting to load Git completions. It's just a
transient error but also easily avoidable by using the old style.
See #7822
Previously, this message told the user to "set $BROWSER and try again". However,
when I first saw this error, I didn't know how I can set `BROWSER` in fish. Moreover,
I often see this error in situations when no browser will work. For instance, I might be
using fish over ssh, and I might either not know whether that system has a text-mode
browser installed or not want to use it.
A further improvement would be to report this message if a browser fails to start.
This actually *worked* in my tests which confuses me.
It really shouldn't, `apropos -foo` will complain about "-o" not being
a valid option.
It should be `apropos -- -foo`.
Now, of course there are awful apropos implementations, so let's see
if someone complains
When `fish` is running in the Chrome OS Linux VM (Crostini),
both `help` and `fish_config` opened a "file not found"
page. That is because on Crostini, `BROWSER` is usually set to
`garcon-url-handler`, which opens URLs in the host OS Chrome
browser. That browser lacks access to the Linux file system.
This commit fixes these commands. `help` now opens the URL on
www.fishshell.com. `fish_config` now opens the URL for the
server it starts. Previously, it opened a local file that
redirects to the same URL.
In the case of `help`, the situation could be improved further
by starting a web server to serve help. I don't know of another
way to access `/share/fish` from outside the VM without user
intervention, and I think that might be a part of the security
model for the Crostini VM.
It's hard to write a test for this. I checked that `help math`,
`python2 webconfig.py`, and `python3 webconfig.py` work on my
machine running in Crostini.
This was a handler for various prompt variables that called a repaint.
Unfortunately, if you set one of those *inside* the prompt (a logical
place for it), this would lead to something like #7775.
So, because this isn't actually *useful* as far as I can see (how do
you set these variables in a way that you're not already inside a
prompt or about to draw a prompt? in a key binding?), we remove it,
like we removed the repaint from git's variable handlers.
This `set -e` had a cartesian product that caused it to remove the
indexes separately, so the later indexes were off - removing the first
and then the second ends up removing the first and then the
old-*third* which is now the second.
Just quote the expansion so it runs in one go.
Fixes#7776
Because we removed repaint coalescing, currently setting any of the
git prompt variables in fish_prompt leads to a repaint loop (that
presumably aborts once it reaches the recursion limit).
Since repainting on these variables isn't really useful (when you
`set` them interactively you already get a new prompt), just remove
it.
There's two cases this "breaks":
- When you set a variable *after* the call to fish_git_prompt
- When you set a variable via a binding
In both of these it's not too much to expect an explicit "commandline
-f repaint", especially since for bindings that's already needed in
most cases, and setting a variable after using it isn't normal.
Fixes#7775.
Called as
__fish_print_pipestatus "[foo" "oof]" "|" (set_color green) (set_color --bold blue) 0 1 2
it would make the closing `oof]` bold green.
Fixes#7771.
* Ensure web_config works on WSL
web_config could sometimes fail on WSL if the user chose not to append
windows directories to their linux $PATH. This change ensures that the
cmd.exe executable is found in most cases even if windows directories
are not appended to $PATH on linux.
An error message letting the user know that cmd.exe was not found, and
that they should add the cmd.exe dir to their $PATH before running
fish_config is displayed if cmd.exe is still not found.
* Exit with a non 0 status code if cmd.exe is not found
In this context, as it stands, $last_pid will give fish's pid (because
of pgroup shenanigans).
Since that doesn't really work, just `disown` without and let fish
figure out what the last process was.
Theoretically this has an issue if someone started a background
process *before* the python script *and* that exits before we run
disown.
That's a vanishingly small window and this is only run on first start,
so it seems acceptable.
Fixes#7739.
This still showed the background gradient, which is just a waste and
looks weird.
Instead make the actual content fullscreen (except for the border
radius, for now)
When pasting a multiline command with indented blocks, extra indentation
from spaces, or tabs, is generally undesirable, because fish already indents
pipes and blocks. Discard the indentation unless the cursor or the pasted
part is inside quotes.
Users who copied fish_clipboard_paste need to update it because
__fish_commandline_is_singlequoted had an API change and was renamed.
I ran into problems described in https://github.com/fish-shell/fish-shell/issues/718 when using this prompt. This seems to be a bug in the prompt -- this change fixes it, at least on my system.
I tried this in tmux (TERM=screen) and gnome-terminal (TERM=xterm-256) with fish 3.1.2, on Linux.
__fish_print_commands just prints the commands we have man pages for,
and help uses that to figure out whether it should link
a command or a section. If the docs aren't installed it won't find
anything.
At least check the builtins, because we document them and it's easy.
This probably needs to be added at build time - glob
doc_src/cmds/*.rst.
Some third party Git tools provide a man page, which we can at least use
for completing options.
The old logic excluded all generated completions for Git subcommands.
Instead, try to load completions for all available external subcommands.
We can use $PATH/git-* because /bin/git-add and friends were removed in Git
1.6.0 in 2008.
Closes#4358 (the "git-foo" wrapping was added in #7652)
This was only a thing in cygwin, and only a workaround because
cygwin's hostname was broken in 2013 and our sample prompts called it,
which caused errors in fish_config.
Our sample prompts no longer call `hostname` at all (they use
`prompt_hostname`, which uses the variable), and it's possible
cygwin's hostname was fixed in the meantime.
Fixes#7669.
* completions/userdbctl: init
userdbctl:
Show user and group information.
A part of systemd.
* completions/userdbctl: fix complete services
Complete the services at the completion time.
This goes to a separate file because that makes option parsing easier
and allows profiling both at the same time.
The "normal" profile now contains only the profile data of the actual
run, which is much more useful - you can now profile a function by
running
fish -C 'source /path/to/thing' --profile /tmp/thefunction.prof -c 'thefunction'
and won't need to filter out extraneous information.
We were soucing it manually, and implicitly via the `complete -C "git-foo "`
wrapper. Always use the latter, so fish knows that the completion is already
loaded.
This had a classic float:left layout, which led to awkward gaps and
stuff.
Since what we want here is basically 100% exactly a flexbox, just use that.
Note: No flexbox for the prompts, atm, because having multiple of
those next to each other looks a bit weird.
Since #7075, git-foo.fish files are sourced when Git completions are loaded.
However, at least Cobra (CLI framework for Go) provides completions like
complete git-foo ...
This means that completions are only offered when typing "git-foo <TAB>"
and not on "git foo <TAB>". Fix this by forwarding the completion requests.
Take care to only forward if there are actually completions for "git-foo",
to avoid adding filename completions.
Over in https://github.com/wez/wezterm/issues/115#issuecomment-765869705 one of my users noted that fish had automatic OSC 7, but that it wasn't enabled under WezTerm.
You can detect WezTerm through the `$TERM_PROGRAM` environment. In practical terms, all versions of wezterm in the wild support OSC 7 so a version check is not needed.
I'm not a fish user myself, but I did give the equivalent change to this a try on my Fedora 33 machine (it has an older version of fish).
I can see in this file that there's some stuff with `__fish_enable_focus` that you may also want to enable under wezterm; the escape sequence is supported as are panes, tabs and windows.
* Include completion for all pkg alias subcommands
* Formatting and dynamic evaluation of alias subcommands
* only set package_name completion once
* fixed syntax error
Fix 1: The --quiet flag must be at the end of the command. The way it was I would never get any status symbol in my prompt as the command failed.
Fix 2: After adding files to git, but before committing them, git status is unsorted. This gave me the output "M A M A" after `uniq`, which resulted in 4 status symbols instead of 2. Sorting them before filtering them fixed the problem.
As mentioned in 5b706faa73, bare
`disown` has a problem: It disowns the last *existing* job.
Unfortunately, it's easy to see cases where that won't happen:
sleep 5m &
/bin/true & # will exit immediately
disown # will most likely disown *sleep*, not true
So what we do is to pass $last_pid.
In help especially this is likely to occur because many graphical
browsers fork immediately to avoid blocking the terminal (we only
added the backgrounding and disown because some weren't).
Note that it's *possible* this doesn't occur if used in the same
function, but I don't want to rely on those semantics.
It might be worth doing this as the default - see #7210.
This is mildly useful when activating virtualenvs. We had remove
these files earlier, but since there are no more false negatives from
__fish_complete_suffix it seems safe to re-add them.
0507b04 loosened the FreeBSD-only restriction on `pkg` completions to
!SunOS in order to support DragonFlyBSD. This is overly broad and can
still cause the script to be loaded on systems that we can't
realistically expect to have `pkg` be the FreeBSD pkgng package manager
(especially since `pkg` is a much more generic term when compared to the
likes of `dnf`, `yum`, `deb`, and `apt`).
This patch changes `pkg` + BSD to be the minimum requirements for
considering a system to be using pkgng.
This allows for multiple edits to be undone/redone in one go, as if they
were one edit.
Useful when a function is editing the commandline buffer via scripted
changes or via a keybinding so the internal changes to the buffer can be
abstracted away.
(Having extreme difficulty getting pexpect to play nice with the concept
of undo/redo...)
In e8b6705067 this was made to exit if
not on FreeBSD because Solaris has a tool called "pkg" that apparently
"isn't worth supporting".
Since at least DragonflyBSD also uses FreeBSD's pkg thing, let's turn
that check around.
There's a macOS bug with Source Code Pro that makes it unable to be
colored. Since that makes webconfig unusable, stop recommending it.
Instead, we just pick the default monospace font for the system.
This is slated for removal in python 3.10, see
https://www.python.org/dev/peps/pep-0594/#cgi.
We currently only use it for three things:
- escape_html in old python versions that didn't have that in the html
module
- Parsing multipart/form-data
- Figuring out the charset for json
We keep the first one - if loading escape_html from html fails we fall
back to cgi.
We remove the second - I can't find any case where we use
multipart/form-data. Any place we post data we either explicitly pass
application/x-www-form-urlencoded or implicitly use application/json.
The third is the tricky bit. This drops charset detection under the
assumption that we're never going to encounter anything other than
utf-8 (or ascii, which is a utf-8 subset). I'm not sure that holds,
but if it doesn't we can just add a regex to parse the charset.
These used a different object format, so they were passed to
interpret_color wrong.
Because the "common" and "syntax" division doesn't really help all
that much, let's just flatten the thing.
See #7596.
It also reflows.
We might want to think about doing something more extensible here, as
konsole is also about to add reflow, but for now the main problem
children here are VTE and alacritty.
Extends #7491.
Of note: The rpm/yum thing seems to be coupled, so I put it into one
function that tries the yum helper and uses the rpm path otherwise.
Zypper is already its own thing, so this should only be used for yum
and probably dnf (does that still have the helper?)
Zypper can be dropped, as that already used a separate function in the file.
Apk can just be inlined - it's literally one line for installed and another for all packages.
This function doesn't make any sense.
Most things that expect package names expect package names for *one
specific package manager*.
It only happens to work, most of the time, because most people only
have one package manager installed.
Trying to switch to a remote branch like "upstream/ver2" will error with "fatal: a branch is expected, got remote branch 'upstream/ver2'", so these completions should only print the branch name. There doesn't seem to be a function for printing just the branch names for remotes (branch names can have forward-slashes in them), so I have just left them out for now.
This can use files/directories in a variety of ways, and it's
basically impossible to enumerate all of them - basically *any file*
could be mounted, if only there is a filesystem for it.
We still give the blockdevices and predefined mountpoints, so they can
still be used.
And again clang-format does something I don't like:
- if (found != end && std::strncmp(found->name, name, len) == 0 && found->name[len] == 0) return found;
+ if (found != end && std::strncmp(found->name, name, len) == 0 && found->name[len] == 0)
+ return found;
I *know* this is a bit of a long line. I would still quite like having
no brace-less multi-line if *ever*. Either put the body on the same
line, or add braces.
Blergh
At least on Arch Linux, pacmd and pulseaudio aren't necessarily available just because pactl is (pipewire is now a thing, and it installs libpulse but not pulseaudio)
Just copy that "find an executable" code we already have,
the one that was commented with "oh, btw, distutils.spawn.find_executable is bad",
and use it here as well.
Work towards #7514.
The code to override the `(status current-command) was present`, but not
handled in either the default `fish_title` function or the fallback.
Closes#7444.
Use the `-d` parameter to `zfs list` to limit snapshots to the dataset
named in the current token being completed. Thanks to @Debilski for the
tip.
Closes#7472
Only generate the list of snapshots when
a) the argument must be a snapshot and nothing else, or
b) the argument as typed contains a literal @, or
c) a snapshot is a valid completion and there is only one dataset
matching the argument as entered.
Unfortunately, it seems the `zfs` command itself is extremely primitive
and doesn't support listing snapshots by dataset so when we need to
generate completions, we end up needing to enumerate all snapshots
(ever) across all datasets. I'd be very happy to be proven wrong, but I
think the only other way would be manually parse `zdb` output.
See #7472
- clip.exe is used to copy to the Windows clipboard
- There's no binary for pasting from the Windows clipboard so
`Get-Clipboard` from powershell is used as a workaround. The
superflous carriage return is stripped from the output.
This is super cheesy.
One of the most common feature requests we get is "control-r must
search", even tho just using history-search-backward via e.g. up-arrow
is perfectly capable. The only real difference is that ctrl-r search
in other shells allows editing the search term by default, while we
stop the history search and edit the new commandline in those cases.
So, since the major problem is muscle-memory on ctrl-r,
let's just use that!
This makes ctrl-r do nothing on empty commandlines, and do
history-search-backward otherwise, so the basic flow of "press ctrl-r
to start history search, enter your search term, press ctrl-r to cycle
through matches" just works (except the first ctrl-r is useless and it
doesn't show anything).
See #602.
jobs -p %1 prints all processes in the first job.
fg is special because it only takes one argument. Using the last process
in the pipeline works for the cases I can think of.
Fixes#7406
These aliases seem to be common, see #7389 and others. This prevents
recursion on that example, so `alias ssh "env TERM=screen ssh"` will just
have the same completions as ssh.
Checking the last token is a heuristic which hopefully works for most
cases. Users are encouraged to use functions instead of aliases.
This prevents a seemingly infinite loop in
fish -c 'alias ssh "env ssh"; complete -C "ssh "'
It still prints "maximum recursion depth exceeded", but a follow-up commit
will work around that.
Fixes#7389
In the new __fish_apropos, makewhatis is run explicitly to generate the
whatis database. However this can be a little slow. Run it in the
background, after the apropos call completes so as to avoid a weird
race.
This means that descriptions may not be available the first time the
user invokes it, but that's better than appearing to hang for a while.
override MANPATH used by apropos with local whatis database and update it once a day
get rid of xargs
Created __fish_apropos and fixed __fish_complete_man to use that as well
moved macos apropos comment
If the padding is not divisible by the char's width without remainder,
we pad the remainder with spaces, so the total width of the output is correct.
Also add completions, changelog entry, adjust documentation, add examples
with emoji and some tests. Apply some minor style nitpicks and avoid extra
allocations of the input strings.
This was a wrapper around status_to_signal, just because that only
handled a single argument.
Instead, just teach status_to_signal to handle multiple arguments and
be done.
This is too important to not be one.
For one if it couldn't be loaded for any reason it would
break a lot of fish scripts.
Also this is faster by ~20x.
Fixes#7342
"function --argument" is not a thing, it's "--argument-names". This only
accidentally works because our getopt is awful and allows abbreviated
long options.
Similarly, one argparse test used "--d" instead of "-d" or "--def".
When pressing \ep on an empty commandline, the cursor would stay at the
beginning of the commandline. Move it to the end of the previous command,
this feels a bit more natural.
The case for symlinked directories being duplicated a lot isn't there,
but there *is* a usecase for adding the symlink rather than the
target, and that's homebrew.
E.g. homebrew installs ruby into /usr/local/Cellar/ruby/2.7.1_2/bin,
and links to it from /usr/local/opt/ruby/bin. If we add the target, we
would miss updates.
Having path entries that point to the same location isn't a big
problem - it's a path lookup, so it takes a teensy bit longer. The
canonicalization is mainly so paths don't end up duplicated via weird
spelling and so relative paths can be used.
Since version 5 (IIRC), pacman has a file database.
This is useful for people who don't have pkgfile, but we still prefer
that because it's much faster - pacman takes a full *second* on my system.
This could lead to an infinite loop (well, stack overflow) because
fish_command_not_found would also be defined to call
__fish_command_not_found_handler.
Since this is for
- missing command errors
- when downgrading
we can just remove it.
Previously, when a command wasn't found, fish would emit the
"fish_command_not_found" *event*.
This was annoying as it was hard to override (the code ended up
checking for a function called `__fish_command_not_found_handler`
anyway!), the setup was ugly,
and it's useless - there is no use case for multiple command-not-found handlers.
Instead, let's just call a function `fish_command_not_found` if it
exists, or print the default message otherwise.
The event is completely removed, but because a missing event is not an error
(MEISNAE in C++-speak) this isn't an issue.
Note that, for backwards-compatibility, we still keep the default
handler function around even tho the new one is hard-coded in C++.
Also, if we detect a previous handler, the new handler just calls it.
This way, the backwards-compatible way to install a custom handler is:
```fish
function __fish_command_not_found_handler --on-event fish_command_not_found
# do a little dance, make a little love, get down tonight
end
```
and the new hotness is
```fish
function fish_command_not_found
# do the thing
end
```
Fixes#7293.
Commit 5d135d555 (prompts: fix pipestatus for jobs prefixed with "not")
introduced a backwards compatibility hack about adding an optional argument
to __fish_print_pipestatus. This hack would break downgrading to fish 3.1.2
if the user copied the new prompt to their config - they would get a backtrace
on every prompt which is arguably worse than the patch's minor improvement.
This does away with the error trace - old fish just won't show the fancy
new pipestatus on `not true`.
Implemented by passing the last $status as the poor man's kwarg, which works
since 3.1.0 (9b86d5dd1 Export all local exported variables in a new scope).
The prompts don't work with fish 3.0.0 or older; downgrading does not seem
too important in general but I think this patch is an okay simplification.
Just a skeleton completion file, but the list of available
actions/completions is at least dynamically generated (there's a lot of
them, they are impossible to remember, and they depend on build
options).
[ci skip]
Now command, jobs, type, abbr, builtin, functions and set take `-q` to
query for existence, but the long option is inconsistent.
The first three use `--quiet`, the latter use `--query`. Add `--query`
to the first three, but keep `--quiet` around.
Fixes#7276.
This allows us to send proper debug messages via FLOG, and it removes
more things from share/config.fish.
Note that the logic differs in some subtle ways. For instance it will
now obey $COLORTERM, so if that isn't "truecolor" or "24bit" it will
deactivate truecolor.
These passed " [" to __fish_print_pipestatus as the left brace.
If the color contained a background, that would also color the space
in, leading to a weird unbalanced space before and none after.
Instead, prepend the whitespace when printing later.
[ci skip]
* fix Subversion prompt
- after switching to "string match", some SVN status symbols need
proper escaping
- the __fish_svn_prompt_flag_names list was missing
"versioned_obstructed" and was therefore not in line with
the symbols from __fish_svn_prompt_chars
- when checking for individual SVN status symbols, use
"string match -e" to handle the case where multiple different
symbols appear in one status column
- use "sort -u" before merging all symbols from a column into
one line
Fixes#6715
* use regex for SVN status matching
Using regex matching will prevent different match behaviour
depending on qmark-noglob feature.
Also, counting the resulting matches is unnecessary.
* use list instead of string for SVN status
Make $column_status a list be not removing newlines from SVN status
output. This makes checking for the individual status types within
a column easier because it doesn't require regex matching.
* added quotes for string length test (-n)
This adds a "fish_greeting" function that prints the variable of the
same name.
In doing so, it makes $fish_greeting default to a global
variable (this is of little cost because of the `_` builtin)
This means that:
- We have fewer universal variables by default
- If we change the default greeting people will actually get
- it (unless they have a leftover universal, of course)
- If the user changes their language the variable changes with it
`go run` compiles and runs a go program passing along the trailing args to the compiled program. Limiting `go run` to only complete *.go files means that if you are running a go file that takes a file path as a command line argument, you frustratingly cannot use tab completion.
New fish_indent does that too, so this will make any future reformatting
diffs smaller.
Done using either of:
perl -pi -e 'undef $/; s/\n*$/\n/' share/**.fish
kak -n -f '<a-/>\n*<ret>d' share/**.fish
fish's internal completion logic is much smarter than the globbing in this
function, so let's just reuse "complete -C", and filter directories and
files with the given suffix.
Thanks to @Kratacoa for reporting on Gitter.
Using "complete -C" works well no prefix is given. Since in this repository
only the openocd completions pass a prefix, I left the prefix-case as is.
It could probably be improved and simplified as well. The prefix argument was
introduced to avoid cd's side effects inside a completion. Using cd is tempting
though because it would allow to use the same logic as without a prefix.
"repaint" here is a bit of a misnomer. It *doesn't* re-highlight, that
just happens on its own.
It re-runs the prompt, which can take quite a while (depending on the
configuration), and which is also useless in this context as this
isn't something the prompt will be reacting to (theoretically it
could, but I doubt the utility of displaying "PASTE" for a few milliseconds).
The external-commands-only completion was briefly added in 3.1.0 and removed
in 3.1.1 (see #6798), which means we can remove some dead code.
Maybe we should just remove __fish_complete_external_command - it could break
users, but then again, we don't really have a way to stop people from starting
to use this deprecated function. The underscores ought to communicate that
this is function is private to fish but that is not enforced.
pacman -U is intended to be used with (among others) files like this:
# pacman -U ./linux-headers-5.6.2.arch1-2-x86_64.pkg.tar.zst
Thus, let's enable file path completion for this kind of operation.
If it can't recognize the DE, xdg-open uses a "generic" way of opening
things where it doesn't spawn off a DE-provided utility like kde-open.
This sounds great, but it fails to fork and therefore blocks the
terminal.
So we start it in the background and disown it.
Fixes#7215.
a) they can screw up our expected output/behavior
b) they can blow up your system
In my case, the unit tests were calling Pantheon's fish integration
script which would then proceed to blow up dbus with messages about each
individual test completing.
The colors defined in `colorutils.js` are specified in
fish format, and therefore RGB values lack the leading
`#` character and do not fully follow the html/css spec
(w3.org/TR/css-color-4/#typedef-hex-color).
Web config sends these values as-is to the browser,
without first converting to a browser-friendly format.
While this (somehow) works for the most part, a few
colors get lost along the way and do not display in
the customization selector nor in the preview when
selected. This behavior was seen in Firefox.
To fix this, let's prepend the missing '#' character
to all RGB colors defined in `colorutils.js`.
This improves some generated completions, for example:
diff -u completions.old/g3topbm.fish completions.new/g3topbm.fish
+complete -c g3topbm -o stop_error -d 'This option tells g3topbm to fail when it finds a problem in the input'
-complete -c g3topbm -o stop_error
This used to use "success", which was our own thing, but which I can't
get working.
So instead we just use ".then", which only passes one object as an
argument that then contains all the other data we use.
This should be enough to complete the port to angular 1.8
* Update apk-tools completions
Add completions of options of it's subcommands.
The completions of deprecated options is unimplemented.
* Fix installed package listing for apk-tools
An error occurs when the local cache does not exist, so fixed this.
This was always awkward as fish script, and had problems with
interrupting the autoloading.
Note that we still leave the old function intact to facilitate easier
upgrading for now.
Fixes#7145.
Current firefox-developer-edition (i.e. the beta) blocks here.
This is awful and bad, but we can easily work around it by just using
a thread.
Blergh
Fixes#7158
Add a helper function to check if the user is root. This function can be
useful for the prompts for example. Modify the prompts made root checked
to use the function instead. Add also the support of Administrator like
a root user.
Fixes: #7031
I really kinda hate how insistent clang-format is to have line
breaks *IFF THE LINE IS TOO LONG*.
Like... lemme just add a break if it looks better, will you?
But it is the style at this time, so we shall tie an onion to our
belt.
* completions/git: Show all accepted values with git config
Finally closes#3812.
Acceptable values are generated using `git help --config`
* completions/git: Show config value as description for git config
* completions/git: Handle multiline config values
When completing `git config` only display the first
line of config value as description if it is
multiline, appended with an ellipsis.
* Fix#7113 (cannot call help using msys2), correct a few regexes.
* Use regex instead of glob-style matching
* Match `\.exe$` instead of `cmd\.exe$` for WSL
* Match `\.exe(\s+|$)` instead of `\.exe$` and `cmd\.exe$`
* Fix a few regexes
This allows cygstart to be manually set as a browser, with or without arguments
`adb` shell by default sends stderr from the command to stdout, so that `adb pull nonexistent<tab>` will show the error message from the `find` command. `>` must be escaped so that redirection is done inside the command executed by `adb shell`.
- Complete signals with --on-signal
- Complete variables with --on-variable and --inherit-variable
- Complete event handlers with --on-event
- Complete commands with --wraps
- Add `complete` spec for --inherit-variable
This had this weird "pass along the sha, then check" logic to it which
is entirely unnecessary.
This function just says when something is staged, nothing more. Why
that is you can figure out for yourself.
This makes it easier to call this function, and it no longer prints an
empty line if nothing is staged.
This was intended to stop showing the user "unimportant" variables,
but it just didn't complete them entirely, even if the current token
starts with a dunder (or `fish` of all things!).
Because completions sort `_` last, let's just complete these always
and let the user filter them.
This wasn't added to the prompt status order, so it was computed and
then not used for the informative prompt.
We still check later if we should compute it, so this is harmless if
showstashstate is unset.
Fixes#7136.
The `snap interfaces` command prints out a deprecation notice to stderr. This breaks the completion
support for interfaces, connect and disconnect commands like so:
```
$ snap connect <TAB>error: no interfaces found
error: no interfaces found
...
'snap interfaces' is deprecated; use 'snap connections'.
'snap interfaces' is deprecated; use 'snap connections'.
'snap interfaces' is deprecated; use 'snap connections'.
error: no interfaces found
error: no interfaces found
'snap interfaces' is deprecated; use 'snap connections'.
```
Ultimately, the snap command completion should switch to `snap connections`. However, for now try to
workaround the notice by redirecting stderr.
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
On my system this printed just "Description:" without any additional
characters, so this awkward `sed` didn't match and produced *all
packages on one line*.
Tbh this should probably be rewritten, but first we'd have to find a
way to get proper output here.
* docs/faq: Mention prepend_sudo
[ci skip]
* __fish_prepend_sudo: Use $history[1] if commandline is empty
Currently, if you press alt+s with an empty commandline, it inserts
"sudo", which seems fairly useless.
Now, it inserts "sudo " followed by the last history entry, which
makes it a replacement for `sudo !!`.
* docs
This reverts commit 1b0ec21773.
"Interactive" has multiple meanings here, one of them being "the whole shell" is interactive, which `status is-interactive` tests, and one "this interaction is interactive", which happens when `read`ing in a script.
Fixes#7080.
* Add an "_" builtin to call into gettext
We already have gettext in C++ (if available), so it seems weird to
fork off a command to start it from script.
This is only for fish's own translations. There's no way to call into
other catalogs, it just translates all arguments separately.
This is faster by a factor of ~1000, which allows us to call
translations much more, especially from scripts.
E.g. making fish_greeting global by default would hurt cost-wise,
given that my fish starts up in 8ms and just calling the current `_`
function takes 2ms, and that would have two calls.
Incidentally, this also makes us rely on a weirdly defined function
less, so it:
Fixes#6804.
* docs: Add `_` docs
Let's see if that filename works out.
* Reword _ docs
This is a function you can either execute once, interactively, or
stick in config.fish, and it will do the right thing.
Some options are included to choose some slightly different behavior,
like setting $PATH directly instead of $fish_user_paths, or moving
already existing components to the front/back instead of ignoring
them, or appending new components instead of prepending them.
The defaults were chosen because they are the most safe, and
especially because they allow it to be idempotent - running it again
and again and again won't change anything, it won't even run the
actual `set` because it skips that if all components are already in.
Fixes#6960.
fish_git_prompt encloses its output in brackets, however this can be changed by supplying a format string to it, i.e. `fish_git_prompt %s`.
However when using `fish_vcs_prompt` there's no way to pass on the arg to fish_git_prompt, so you need to manually remove it.
fish_hg_prompt doesn't have the same format string support as fish_git_prompt, but I suppose it could be added later if needed.
We don't need to call it if a job was stopped, because in that case
read_i() will fire fish_prompt already, because the newly stopped job
was probably a foreground job.
Fixes#1018
The default implementation will not print any output in that case, but this provides users with additional flexibility when it comes to customising the shell's behaviour.
This allows users to customise the behaviour of the shell by redefining the function. This is similar to how fish_title or fish_greeting behave, where the default implementation can be easily overridden.
The function receives as arguments the job id, command line, signal name and signal description.
Since 4414d5c888 (in fish 3.0.0) we
don't autoload completions if the command doesn't exist.
So there is no need to check inside the scripts anymore.
Whats more, a few (like pip and cabal) checked `command -q` instead of
`type -q`, meaning they'd fail if someone used a function instead of a
command of that name.
If the *command* actually needs to exist, checks like that are still
warranted, like in `npm` where aliasing it to `nvm` is popular.
A teensy additional bit: Make `sysctl -w` the same as `sysctl
--write`. That description was bogus.
At the moment calling __fish_prepend_sudo multiple times does not toggle
sudo, and also unnecessarily uses the `-c` flag to `commandline` to see if
the first token on the commandline is "sudo".
This change removes the `-c` switch and also toggles "sudo" on multiple
calls to __fish_prepend_sudo, while maintaining the cursor position and
while maintaining any spaces between "sudo" and the next token on the
commandline.
The local-exported variable will have disappeared by the time the
function is called.
"-V"/"--inherit-variable" is meant for something like this.
Fixes#7011
The completions for help know many more help topics, it makes no sense
to whitelist them here.
Fix anchor links for tutorial sections.
Remove some dead code: the "man" branch was unreachable because of the
earlier (__fish_print_commands) case.
Add missing options:
--path causes the specified variable to be treated as a path variable, meaning it will automatically be split on colons, and joined using colons when quoted (echo "$PATH") or exported.
--unpath causes the specified variable to not be treated as a path variable. Variables with a name ending in "PATH" are automatically path variables, so this can be used to treat such a variable normally.
[ci skip]
* Fix issue if md5sum is used instead of md5
Both have a different output which results in different array sized
Signed-off-by: Ron Gebauer <ron.gebauer@raytion.com>
* Add feedback
Signed-off-by: Ron Gebauer <ron.gebauer@raytion.com>
* Fix manpath handling in create_manpage_completions.py
...as well as do some (very!) light cleanup.
Currently, `create_manpage_completions.py` does not properly
understand/respect the `$MANPATH` variable. One important feature of
`$MANPATH` is that an empty component (i.e. the trailing : in
`foo:bar:`) expands to the 'default' or 'system' path -- that is to say,
the path that would be used if `$MANPATH` was unset. This allows the
user to extend the manpath without clobbering it, and has been a feature
many Unices have included for years.
The current implementation blindly uses the `$MANPATH` variable if it
exists, which does not allow for this behaviour -- to expand the
variable correctly, an external program must be invoked. Therefore, we
first shell out to the 'proper' (read: best guess) external program. If
that fails, we can then try to use `$MANPATH` directly/literally.
Finally, if both of those are impossible, we can fall back to some
common paths from widely used operating systems.
Note that the `man.conf` parsing has been removed: this is because while
many 'traditional' Unices (BSDs, Solaris, macOS) support this file, only
macOS actually ships a file -- most other Unices use a `conf.d`-style
layout and supporting that from our Python is impractical and silly at
best. On GNU (read: Linux) systems, `mandb` uses `/etc/man_db.conf` with
slightly different syntax and sematics. As this code-path has bitrotted
(and likely never worked, anyway), just remove it.
`create_manpage_completions.py` looks like it has suffered a lot of
confusion and bitrot in general over the last few years -- and is
overdue for a major refactoring. I am quite interested in tackling this,
but I plan to wait until the go-ahead to drop support for Python 2 is
given, as a major refactor/rewrite that still supports Python 2 (and
thus ignores the ergonomic/API/syntax improvements of Python 3) does not
make sense to me.
Related: #5657
It would probably be good to revisit `man.fish` once again when a
comprehensive refactor happens: hopefully every permutation of
`man`/`$MANPATH` could be documented as part of that effort.
* Restore /etc/man.conf parsing
I was not aware that this codepath was used -- since it appeared that it
would throw an error when it was reached. Redo it, using regex, and
support parsing NetBSD man.conf as well (untested).
* Fix create_manpage_completions.py under Python 2
It removed $KONSOLE_PROFILE_NAME and added $KONSOLE_VERSION.
Let's assume if $KONSOLE_PROFILE_NAME is set we use the old sequences,
if not we use the new ones.
This reverts commit 535845861a.
That commit introduced a bug where tab-completing commands no longer
prints their descriptions, unless there is an exact match.
This was a weird one. We split the aliases correctly even with
multiple lines, but then broke it all again when we just printed the
description.
Note that it would be possible to use `string split0` here, but since
anything longer than a line is likely too long for a description
anyway we don't bother.
Fixes#6946.
When this switched over from directly piping commandline to storing
its output and using printf, I inadvertently always added a trailing
newline. That's probably annoying.
Note that this will now always *remove* a trailing newline (because
the command substitution does). That will barely make a
difference (because trailing newlines are quite unusual in the
commandline) and will probably feel better than keeping it - we could
even make a point of removing trailing whitespace in general.
Fixes#6927
This updates the behavior of tilde to match the behavior found in vim.
In vim, tilde toggles the case of the character under the cursor and
advances one character. In visual mode, the case of each selected
character is toggled, the cursor position moves to the beginning of
the selection, and the mode is changed to normal. In fish, tilde
capitalizes the current letter and advances one word. There is no
current tilde command for visual mode in fish.
This patch adds the readline commands `togglecase-letter` and
`togglecase-selection` to match the behavior of vim more closely. The
only difference is that in visual mode, the cursor is not modified.
Modifying the cursor in visual mode would require either moving it in
`togglecase-selection`, which seems outside its scope or adding
something like a `move-to-selection-start` readline command.
The description for an alias which already has escape sequences will
use backslash escapes for quoting; usually `string escape` can simply
quote it. Use a regex that accepts either escaping style.
A minor follow-up to #6866 (e658a88ab0).
These file types should be properly handled by other unzip flavors too,
regardless of Debian's/non-Linux Unixes' idiosyncrasies.
I've been dealing with these a lot recently (android dev...), and it's
pretty annoying that unzip completions don't recognize them (They're
just zip files with a weird file extension).
Make is much better than us at figuring out which makefile to use,
just pass through the relevant parameters.
Also previously they didn't work at all for Makefiles like the one in
https://github.com/jonas/tig, for example.
I kinda hate how fussy clang-format is. It reflows text
constantly (line limit), forces things onto one line *except* when
they're too long, and wants to turn this:
```c++
return true;;
```
into this:
```c++
return true;
;
```
instead of, you know, eliminating the second semicolon?
Anyway, it is what it is and we use it, I'll just look into getting some
more slack.
Add completion for terraform worskpace.
The terraform env command is deprecated.
The terraform workspace command should be used instead.
"terraform env" will be removed in a future Terraform version.
Fixes#6798
This re-adds some false positives: functions, builtins and abbreviations
are suggested after commands like sudo but I don't think anyone had
complained about that.
The default indicator ruined alignment, which is a major design
feature here.
Handle it by including the mode indicator in the prompt proper.
Fixes#6802.
[ci skip]
Many people have mentioned wanting support for changing / yanking /
deleting between "" and '', meaning the commands `ci' ci" yi' yi" di' di"`,
so this adds that support in a generic, and thus potentially confusing way.
The concept is that we check for the character backwards and forwards
before making the selection. Unfortunately, this will also work for *any*
character that isn't `w` or `W`, so `cia` could change everything between
two `a` characters.
Looking through the [bind documentation](https://fishshell.com/docs/current/cmds/bind.html)
and input handler at `src/input.cpp`,
this is the best possible solution I could come up with until
`forward-jump` and `backward-jump` can accept input in the call to `bind`,
and not just from stdin, meaning we can write a binding as:
```
bind di\" backward-jump-till \" and repeat-jump-reverse ...`
```
If that were done, then other commands such as `di)` to go between `()` would
be possible.
There are also some added `y` bindings not part of #6648.
Let me know if you need anything else.
Add completions for `downgrade` tool
Add new `--installed` option for printing Arch packages
Change Arch Linux package related completions to use `--installed`
add newline
The output of
systemctl list-units
seems to include a marker of '●' or '*' for some units, even if the
output is not going to a terminal and "--no-legend" and "--no-pager"
are given. This appears
to be a recent development, and there does not appear to be a flag to
disable it.
So we simply filter it out in the completions to once again hopefully
offer the actual units.
Fixes#6740
Even if $DISPLAY is unset, xdg-open can be useful, and on systems that
have xdg-open, "open" is most likely some god awful outdated thing
called "openvt" elsewhere.
Fixes#6739
[ci skip]
Fixes#6138
Naturally this does not work for many other editors/aliases,
but it's still nice that we can make it work for some common
editors without requiring any configuration.
Of course this approach is not terribly flexible; but it's
alwyas possible to just wrap edit_command_buffer and set an
EDITOR that knows about the cursor position. It doesn't
feel important enough to add a configuration option.
Using a local variable means we have to expand it when loading the
completion. With this approach, the content of the variable will be
expanded, so escape it.
The default hg prompt is slow on large repositories (hg status takes
2-3 seconds on mozilla-central) which is unacceptable as a default.
Mimick our git prompt: by default, only show the current branch.
If the new variable $fish_prompt_hg_show_informative_status is set,
then use the old behavior.
[ci skip]
This is apparently quite slow on large svn repos (like 40 seconds
slow), and we don't have a good thing to display other than the full
file information.
So we'll have to disable it for now.
Fixes#6681.
[ci skip]
Since #6406, read will trim whitespace before the last variable.
In this case there is only one variable, and the line looks like
M CHANGELOG.md
so it does indeed start with whitespace, and the whitespace is quite
significant.
Fixes#6650.
[ci skip]
Mimic the behavior of Linux's `apropos -e` and ~BSD's `apropos -f` with
the awk script by disallowing trailing characters in the name of the
manpage as compared to the original input string. Apart from being
faster (by aborting earlier and stopping `apropos` by breaking the pipe
after the first match), it's also more correct.
Mostly line breaks, one instance of tabs!
For some reason clang-format insists on two spaces before a same-line comment?
(I continue to be unimpressed with super-strict line length limits,
but I continue to believe in automatic styling, so it is what it is)
[ci skip]
Add the input function undo which is bound to `\c_` (control + / on
some terminals). Redoing the most recent chain of undos is supported,
redo is bound to `\e/` for now.
Closes#1367.
This approach should not have the issues discussed in #5897.
Every single modification to the commandline can be undone individually,
except for adjacent single-character inserts, which are coalesced,
so they can be reverted with a single undo. Coalescing is not done for
space characters, so each word can be undone separately.
When moving between history search entries, only the current history
search entry is reachable via the undo history. This allows to go back
to the original search string with a single undo, or by pressing the
escape key.
Similarly, when moving between pager entries, only the most recent
selection in the pager can be undone.
Same issue occurs here, as in #6270 (and fixed in 611a658 for `__fish_describe_command.fish`). Same reason. I've just copied the same workaround and changed the function name to match.
Fixes#6556.
Although present since 2006, fish no longer relies on POSIX-compliant tools to the same degree. This
code causes a platform specific change that makes the tests fail, so remove it.
6902459566 was an attempt to not print
$status twice in the prompt. As a result we print $pipestatus but
not $status, which /usually/ is the same as $pipestatus[-1] --- unless
the builtin "not" is used, which inverts the $status of a job (it does
not alter $pipestatus).
As a result, the default prompt prints unexpected status codes:
~ > not false
~ [1]> not true
~ > not true | true
~ > not false | false
~ [1|1]>
This commit reintroduces printing of $status after $pipestatus, but only
if it is different from $pipestatus[-1].
Additionally, we only print anything at all if the $status is nonzero,
to avoid confusing output on `not false | false`
~ > not false
~ > not true
~ [0] 1> not true | true
~ [0|0] 1> not false | false
~ >
I think this is closer to users' expectations for those cases; they should
not have to think about this implementation detail of the not-statement.
* Replace multiple calls to `tail` and `string` with a single `string
replace` execution
* Dynamically generate list of available benches, bins, and tests for
`--bench`, `--bin`, and `--test` switches
[ci skip]
At the moment the "prepend sudo" functionality always sets the cursor to
the end of the line. This changes it to restore the relative position of
the cursor.
OpenBSD uses [unveil(2)](https://man.openbsd.org/unveil) in chromium and
firefox. This means that things outside of directories like ~/Downloads or /tmp are not visible to the
browsers.
Change webconfig so it uses tempfile.NamedTemporaryFile to create our temp file.
We'd use $__fish_data_dir, but that already had the "/fish" component,
and then we'd add it again later, so we would try to find vendor
functions in places like
/usr/share/fish/fish/vendor_functions.d
which obviously don't exist.
Instead let's add the "/fish" component to the xdg dirs early, which
also saves us from having to repeat it later.
Fixes#6428
See #6508
[ci skip]
It's now good enough to do so.
We don't allow grid-alignment:
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
becomes
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
It's just more trouble than it is worth.
The one part I'd change:
We align and/or'd parts of an if-condition with the in-block code:
```fish
if true
and false
dosomething
end
```
becomes
```fish
if true
and false
dosomething
end
```
but it's not used terribly much and if we ever fix it we can just
reindent.
They need to be escaped twice, for the local and the remote shell.
Also don't suggest local files as rsync remote paths (-a -> -xa) and
fix completion for remote paths containing multiple consecutive spaces.
Fixes#1872
[ci skip]
$XDG_DATA_DIRS/vendor_{completions,conf,functions}.d
Additionally, CMake variables extra_{completions,conf,functions}dir are
appended, if they are not already contained in $XDG_DATA_DIRS.
If XDG_DATA_DIRS is not defined, we fall back to
$__fish_datadir/vendor_completions.d:${extra_completionsdir}
for completions. Same for conf and functions.
This removes a call to `sed` and allows the user to specify shortening
via the variable.
We still default to disabling shortening because this prompt never
did.
[ci skip]
We just do a cheesy version check and hope it works out.
If this is fixed in 10.15.4, we have to reenable it. If it still isn't
fixed in 10.16, we need to adjust it.
Fixes#6270
Use string split instead of cut - which we'd fork for 2*signal
count times in a loop when tab was first pressed. Noticably faster
If giving a signal num, what works everywhere is -NUM, if giving
a signal name, what works everywhere is -s NAME - don't show -sNUM
or -NAME completions; that only works on GNU and it's redundant
anyhow as we show the signal number in the description field for -s
or the signal name for the -NUM case in the pager.
Sort -sNAME completions by the signal number not alphabetical
Shorten descriptions
This is part of our (well, my) quest to spice up the default prompt.
In this case we color the host if $SSH_TTY is set, which is easy to
detect and helps draw attention to the host.
See #6398.
See #6375.
This variable holds an integer that resembles the fish version up to
that initializations were performed. It should be incremented whenever
some new initialization is required after upgrading fish. This should
not change the behavior for existing fish installations, except for a
minor message on installations that upgrade from fish<2.3.0.
[ci skip]
This use of eval is unsafe, not really all that useful and can spew
errors that can't be suppressed. So let's remove it, and in future add
a thing that can do expansions in a safe manner
Fixes#6456.
__fish_complete_suffix accepts a first argument containing a
brace-expansion, like
__fish_complete_suffix '.{c,cpp,py}'
We're gonna be removing the `eval` that does that shortly, so let's
remove all uses in our code.
"To assume" and such.
It doesn't check $SHELL, so it might have some other automagic that
can fail (probably still because of the login shell, but I have no
idea).
Override the special variable that
click-completion (https://github.com/click-contrib/click-completion)
uses to force it instead.
Really fixes#6454.
[ci skip]
This checks $SHELL to determine which completions to print, and $SHELL
is typically set by your login program.
So if the login shell isn't fish, this will print the wrong
completions.
Fixes#6454
[ci skip]
"-C" is short for "--case-sensitive", which is entirely okay with "--delete".
The one that isn't okay is "-X", which is short for "--Clear".
Seen on gitter.im
This prefixes files beginning with `-` with a `./` when generating
completions *in fish code*. Standard completions for directory listings
generated by the C++ directory traversal code are not afected by this
patch.
Most fish completions defer to `__fish_complete_suffix` to generate the
file/directory completions, these *will* be corrected.
From the `git-switch` documentation:
If <branch> is not found but there does exist a tracking branch in
exactly one remote (call it <remote>) with a matching name, treat as
equivalent to
$ git switch -c <branch> --track <remote>/<branch>
* Make `type -p` and `type -P` behave as documented
* Recognize `-` as an additional sign of no path
Functions created via `source` (like by `alias`) cause `functions --details` to return `-`
rather than `stdin` when invoked upon them.
Set variables for available connections and SSIDs only when the completion is loaded.
This is not perfect but faster than scanning for connections everytime.
Don't complete connection UUID, DBUS-PATH, ACTIVE-PATH because they are unintelligible.
Instead only complete the connection name.
See #6379
[ci skip]
* Add the `--succinct` flag to `type`
* Use `echo` rather than `printf`
* Change `succinct` to `short`; print path if known
* Clean up the printing logic ever so slightly
This was mostly dead, since $fish_color_host is set to normal in
__fish_config_interactive. The assignment was only used if the user
explicitly unsets fish_color_host (which they shouldn't, really).
Anyway it's weird to use cyan, use normal instead.
[ci skip]
The colors are set in __fish_config_interactive before the prompt is
painted for the first time.
Also initialize the $fish_color_status for the (pipe) status, bump the
version for that.
[ci skip]
If a command fails, print the pipestatus in red instead of yellow and
don't print the status of the last process again. See #6375.
Also use $fish_color_status for coloring status consistently.
Also use __fish_pipestatus_with_signal to print SIGPIPE instead
of a numeric code on e.g.: yes | less +q
[ci skip]
This purported to need python > 3.4, but used anypython.
Plus it's not super useful anyway since it can easily be told to
use *all* cpus, so there's no need to set it to the precise number.
See #6400.
[ci skip]
If Python 3.4 or later installed on the system, complement to the
number of physical cores. In addition, even if the number of physical
cores cannot be obtained, it was fixed to run properly.
(command pwd) uses the system's implementation of pwd. At least the GNU
coreutils implementation defaults to -P, which resulted in symlinks being
expanded when switching between directories with nextd/prevd.
- Don't use a guard uvar - we're only setting variables now, and
- that's basically free.
- Allow non-universal color variables
- Simplify the root color setting a bit.
- Some comments
[ci skip]
This did some weird unescaping to try to extract the first word.
So we're now more likely to be *correct*, and the alias benchmark is
about 20% *faster*.
Call it a win-win.
Fix 'string length: Unknown option': add `--` before $subcommand
Fix count $subcommand always = 1 with `sudo` and `doas`:
give argv as array to __fish_complete_subcommand
[ci skip]
This mostly fixes some wrong indents or replaces some stray tab indents.
I excluded alignment on purpose, because we have a whole bunch of code
that goes like
```fish
complete -c foo -n 'some-condition' -l someoption
complete -c foo -n 'some-longer-condition' -l someotheroption
```
and changing it seems like a larger thing and would include more
thrashing.
See #3622.
This would have prevented #6323.
While we don't want to pepper `command` everywhere, `psub` is kind of
a core thing, so we should try to proof it against common problems.
This adds string-x.rst for each subcommand x of string. The main page
(string.rst) is not changed, except that examples are shown directly after
each subcommand. The subcommand sections in string.rst are created by
textual inclusion of parts of the string-x.rst files.
Subcommand man pages can be viewed with either of:
```
man string collect
man string-collect
string collect <press F1 or Alt-h>
string collect -h
```
While `string -h ...` still prints the full help.
Closes#5968
Changes identity `is` for equality `==` check. To remove python warnings when updating auto complete
```
/usr/local/Cellar/fish/3.0.2/share/fish/tools/deroff.py:770: SyntaxWarning: "is" with a literal. Did you mean "=="?
if len(comps) is 2:
/usr/local/Cellar/fish/3.0.2/share/fish/tools/deroff.py:954: SyntaxWarning: "is" with a literal. Did you mean "=="?
if len(comps) is 2:
Parsing man pages and writing completions to /Users/james/.local/share/fish/generated_completions/
6155 / 6155 : zic.8
```
This reverts commit f620ddf03b.
Setting the paste handler isn't performance-sensitive.
On the other hand setting it this way makes things less transparent,
less flexible (if e.g. a paste handler is installed while the shell is running),
and causes #6286.
Fixes#6286.
[ci skip]
Presently the completion engine ignores builtins that are part of the
fish syntax. This can be a problem when completing a string that was
based on the output of `commandline -p`. This changes completions to
treat these builtins like any other command.
This also disables generic (filename) completion inside comments and
after strings that do not tokenize.
Additionally, comments are stripped off the output of `commandline -p`.
Fixes#5415Fixes#2705
This just makes more sense, as people don't want to enter exact
matches if they delete interactively.
It also brings it in line with "search".
Fixes#6142
Rejects #6070
MacOS Catalina apparently ships a stripped down svn that doesn't have
`svnversion`, which we use to print the revision.
For now skip the entire step to remove error spam.
Fixes#6267.
[ci skip]
Every builtin or function shipped with fish supports flag -h or --help to
print a slightly condensed version of its manpage.
Some of those help messages are longer than a typical screen;
this commit pipes the help to a pager to make it easier to read.
As in other places in fish we assume that either $PAGER or "less" is a
valid pager and use that.
In three places (error messages for bg, break and continue) the help is
printed to stderr instead of stdout. To make sure the error message is
visible in the pager, we pass it to builtin_print_help, every call of which
needs to be updated.
Fixes#6227
Some distros (Arch) use python command for Python 3, so we need to update the scripts to work with it. We cannot just switch to python3 command because MacOS does not ship it.
* functions/__fish_print_hostnames: Fix ssh_configs no values return
`string replace` not working with mutlilines variable.
So split per line first.
* functions/__fish_print_hostnames: remove quotes at `split '\n'`
"\n with quotes" will cause `string split` weird issues.
* functions/__fish_print_hostnames: using `read -alz -d \n`
Fix `$contents` issues together
Since the url is inside a AngularJS markup {{url}}, it's better to use **ng-href**.
From [AngularJS Documentation](https://docs.angularjs.org/api/ng/directive/ngHref):
<br>
"Using AngularJS markup like {{hash}} in an href attribute will make the link go to the wrong URL if the user clicks it before AngularJS has a chance to replace the {{hash}} markup with its value. Until AngularJS replaces the markup the link will be broken and will most likely return a 404 error. The ngHref directive solves this problem."
We used to just check for the presence of "--" on the command line to
make judgements about which completions to suggest. Now, even if "--" is
present, we can still make different suggestions by taking the cursor's
position into account.
If "--" is present in the command line, it's usually safe to assume that
the user is going to want to complete a file tracked by git so let's
only suggest branches if "--" isn't present.
When there is already a "src:", we assume that it is a valid ref and
just complete "dst". This allows completion of dest if src is e.g. a
commit SHA (completing all possible refs would probably impact
performance).
See issue #3035.
Corrects #6110
BSD `seq` produces a down-counting sequence when the second argument is
smaller than the first, e.g.:
$ seq 2 1
2
1
$
While GNU `seq` produces no output at all:
$ seq 2 1
$
To accommodate for this behavior, only run `seq` when we are sure that
the second argument is greater than or equal to the first (in this case,
the second argument `line_count` should be greater than 1).
* Add completions/sfdx.fish
* completions/sfdx.fish: add completion for options
* completions/sfdx.fish: add a completion for --manifest(-x) option which need package.json
* completions/sfdx.fish: replace redundant function with already existing one
Revert "gut gpg.fish/gpg1.fish/gpg2.fish; migrate functionality to __fish_complete_gpg.fish"
This reverts commit d558218d03.
Revert "break version-specific completions out into independent function;"
This reverts commit 9160e77b01.
Revert "split gpg2- and gpg1-specific completions to conditional block"
This reverts commit a069b95f63.
* Fix default Alt+W keybinding
The old keybinding would chop off the last line of the `whatis` output
when using a multi-line prompt. This fix corrects that.
* Make variable local and remove unneeded if statement
* Test that token is non-empty
1. Added missing commands and arguments.
2. Removed alternative spelling of some commands (e.g. clear-cache|clearcache) since a choice of spelling is not really useful for completion.
3. Fixed a typo: np-ansi → no-ansi.
4. Removed redundant backslash in front of $COMPOSER_HOME.
The updated completion was initially generated using the bamarni/symfony-console-autocomplete package and then incorporated into the existing code.
Reproducer: type `: \<RET><M-p>`. This used to print an error due to builtin test receiving
too many arguments.
It looks like (commandline -j) can return multiple items, because a job can be broken up in multiple
lines terminated by backslashes.
With the new support for self-insert inserting a bound sequence,
the default binding for space as expanding abbreviations can be simplified
to just `self-insert expand-abbr`. This also fixes the bug where space
would cancel pager search.
This commit makes git completions aware of files that are both staged as renamed, and have unstaged
modifications/are deleted.
__fish_git_files now potentially prints these files twice:
$ __fish_git_files renamed modified
foo Renamed file
foo Modified file
Fixes#6031
By not manipulating each line or even each file at a time, we can go
back to `string` and piece together a pipeline that will execute
significantly faster than shelling out to `awk` will. This also removes
one of the few dependencies on `awk` in the codebase.
With this change, `__fish_print_hostnames` now finishes ~80% faster than
it used to a few commits back.
Reordering the `getent hosts` and read from `/etc/hosts` combined with
minimizing shelling and job invocations for parsing the output results
in a profiled and benchmarked ~42% decrease in the time it takes to run,
and that's on a machine with a very small hosts list in the first place.
This update also fixes the hadling of IPv6 addresses in the hosts
output, which were previously ignored, and ignores 127.* loopback
addresses in addition to the 0.0.0.0 address (plus adds support for
shorter IPv4 notations).
