Extend the commit 8e17d29e04 to block processes, for example:
begin ; stuff ; end
or if/while blocks as well.
Note there's an existing optimization where we do not create a job for a
block if it has no redirections.
job_promote attempts to bring the most recently "touched" job to the front
of the job list. It did this via:
std::rotate(begin, job, end)
However this has the effect of pushing job-1 to the end. That is,
promoting '2' in [1, 2, 3] would result in [2, 3, 1].
Correct this by replacing it with:
std::rotate(begin, job, job+1);
now we get the desired [2, 1, 3].
Also add a test.
It looks like the last status already contains the signal that cancelled
execution.
Also make `fish -c something` always return the last exit status of
"something", instead of hardcoded 127 if exited or signalled.
Fixes#6444
This was previously required so that, if there was a redirection to a
file, we would fork a process to create the file even if there was no
output. For example `echo -n >/tmp/file.txt` would have to create
file.txt even though it would be empty.
However now we open the file before fork, so we no longer need special
logic around this.
Do this only when splitting on IFS characters which usually contains
whitespace characters --- read --delimiter is unchanged; it still
consumes no more than one delimiter per variable. This seems better,
because it allows arbitrary delimiters in the last field.
Fixes#6406
This adds a test for the obscure case where an fd is redirected to
itself. This is tricky because the dup2 will not clear the CLO_EXEC bit.
So do it manually; also posix_spawn can't be used in this case.
The IO cleanup left file redirections open in the child. For example,
/bin/cmd < file.txt would redirect stdin but also leave the file open.
Ensure these get closed properly.
Prior to this fix, a job would hold onto any IO redirections from its
parent. For example:
begin
echo a
end < file.txt
The "echo a" job would hold a reference to the I/O redirection.
The problem is that jobs then extend the life of pipes until the job is
cleaned up. This can prevent pipes from closing, leading to hangs.
Fix this by not storing the block IO; this ensures that jobs do not
prolong the life of pipes.
Fixes#6397
This did some weird unescaping to try to extract the first word.
So we're now more likely to be *correct*, and the alias benchmark is
about 20% *faster*.
Call it a win-win.
This splits a string into variables according to the shell's
tokenization rules, considering quoting, escaping etc.
This runs an automatic `unescape` on the string so it's presented like
it would be passed to the command. E.g.
printf '%s\n' a\ b
returns the tokens
printf
%s\n
a b
It might be useful to add another mode "--tokenize-raw" that doesn't
do that, but this seems to be the more useful of the two.
Fixes#3823.
This added the function offset *again*, but it's already included in
the line for the current file.
And yes, I have explicitly tested a function file with a function
defined at a later line.
Fixes#6350
Since #6287, bare variable assignments do not parse, which broke
the "Unsupported use of '='" error message.
This commit catches parse errors that occur on bare variable assignments.
When a statement node fails to parse, then we check if there is at least one
prefixing variable assignment. If so, we emit the old error message.
See also #6347
This adds initial support for statements with prefixed variable assignments.
Statments like this are supported:
a=1 b=$a echo $b # outputs 1
Just like in other shells, the left-hand side of each assignment must
be a valid variable identifier (no quoting/escaping). Array indexing
(PATH[1]=/bin ls $PATH) is *not* yet supported, but can be added fairly
easily.
The right hand side may be any valid string token, like a command
substitution, or a brace expansion.
Since `a=* foo` is equivalent to `begin set -lx a *; foo; end`,
the assignment, like `set`, uses nullglob behavior, e.g. below command
can safely be used to check if a directory is empty.
x=/nothing/{,.}* test (count $x) -eq 0
Generic file completion is done after the equal sign, so for example
pressing tab after something like `HOME=/` completes files in the
root directory
Subcommand completion works, so something like
`GIT_DIR=repo.git and command git ` correctly calls git completions
(but the git completion does not use the variable as of now).
The variable assignment is highlighted like an argument.
Closes#6048
Presently the completion engine ignores builtins that are part of the
fish syntax. This can be a problem when completing a string that was
based on the output of `commandline -p`. This changes completions to
treat these builtins like any other command.
This also disables generic (filename) completion inside comments and
after strings that do not tokenize.
Additionally, comments are stripped off the output of `commandline -p`.
Fixes#5415Fixes#2705
PATH and CDPATH have special behavior around empty elements. Express this
directly in env_stack_t::set rather than via variable dispatch; this is
cleaner.
This adds support for `fish_trace`, a new variable intended to serve the
same purpose as `set -x` as in bash. Setting this variable to anything
non-empty causes execution to be traced. In the future we may give more
specific meaning to the value of the variable.
The user's prompt is not traced unless you run it explicitly. Events are
also not traced because it is noisy; however autoloading is.
Fixes#3427
Until now, something like
`math '7 = 2'`
would complain about a "missing" operator.
Now we print an error about logical operators not being supported and
point the user towards `test`.
Fixes#6096
The `--entire` would enable output even though the `--quiet` should
have silenced it. These two don't make any sense together so print an
error, because the user could have just left off the `-q`.
Universal exported variables (created by `set -xU`) used to show up
both as universal and global variable in child instances of fish.
As a result, when changing an exported universal variable, the
new value would only be visible after a new login (or deleting the
variable from global scope in each fish instance).
Additionally, something like `set -xU EDITOR vim -g` would be imported
into the global scope as a single word resulting in failures to
execute $EDITOR in fish.
We cannot simply give precedence to universal variables, because
another process might have exported the same variable. Instead, we
only skip importing a variable when it is equivalent to an exported
universal variable with the same name. We compare their values after
joining with spaces, hence skipping those imports does not change the
environment fish passes to its children. Only the representation in
fish is changed from `"vim -g"` to `vim -g`.
Closes#5258.
This eliminates the issue #5348 for universal variables.
Consider a group of short options, like -xzPARAM, where x and z are options and z takes an argument.
This commit enables completion of the argument to the last option (z), both within the same
token (-xzP) or in the next one (-xz P).
complete -C'-xz' will complete only parameters to z.
complete -C'-xz ' will complete only parameters to z if z requires a parameter
otherwise, it will also complete non-option parameters
To do so this implements a heuristic to differentiate such strings from single long options. To
detect whether our token contains some short options, we only require the first character after the
dash (here x) to be an option. Previously, all characters had to be short options. The last option
in our example is z. Everything after the last option is assumed to be a parameter to the last
option.
Assume there is also a single long option -x-foo, then complete -C'-x' will suggest both -x-foo and
-xy. However, when the single option x requires an argument, this will not suggest -x-foo.
However, I assume this will almost never happen in practise since completions very rarely mix
short and single long options.
Fixes#332
This stops reading argument names after another option appears. It does not break any previous uses and in fact fixes uses like
```fish
function foo --argument-names bar --description baz
```
* `function` command handles options after argument names (Fixes#6186)
* Removed unneccesary test
Meaning empty variables, command substitutions that don't print
anything.
A switch without an argument
```fish
switch
case ...
end
```
is still a syntax error, and more than one argument is still a runtime
error.
The none-argument matches either an empty-string `case ''` or a
catch-all `case '*'`.
Fixes#5677.
Fixes#4943.
This test uses universal variables, and so it can fail when run
multiple times.
It might be a good idea to do this in general, but for now let's just
try it here.
Previously when propagating explicitly separated output, we would early-out
if the buffer was empty, where empty meant contains no characters. However
it may contain one or more empty strings, in which case we should propagate
those strings.
Remove this footgun "empty" function and handle this properly.
Fixes#5987
I tested this manually (`littlecheck.py -s fish=fish tests/checks/eval.fish`) from the base directory, which means I got
"tests/checks/eval", while the real test gets "checks/eval".
I then reran `make test_fishscript`, but that didn't pull in the
updated test - we should really handle that better.
I'm gonna add more tests to this and I don't want to touch the old stuff.
Notice that this needs to have the output of the complete_directories
test adjusted because this one now runs later.
That's something we should take into account in future.
This required a bit of thinking.
What we do is we have one test that fakes $HOME, and then we do the
various config tests there.
The fake config we have is reused and we exercise all of the same codepaths.
This is a bit weird sometimes, e.g. to test the return status (that
fish actually *returns $status*), we use a #RUN line with %fish
invoking %fish, so we can use the substitution.
Still much nicer.
The missing scripts are those that rely on config.
This is a nice test (ha!) for how this works and what littlecheck can
do for us.
1. Input is now the actual file, not "Standard Input" anymore. So
any errors mentioning that now include the filename.
2. Regex are really nice for filenames, but especially for line
numbers
3. It's much nicer to have the output where it's created, instead of
needing to follow three files at the same time.
This adds support for .check files inside the tests directory. .check
files are tests designed to be run with littlecheck.
Port printf test to littlecheck and remove the printf.in test.