This new file is supposed to encapsulate all of the logic around
reacting to variable changes, as opposed to the environment core.
This is to help break up the env.cpp monolith.
Prior to this fix, a job would only inherit a pgrp from its parent if the
first command were external. There seems to be no reason for this
restriction and this causes tcsetgrp() churn, potentially cuasing SIGTTIN.
Switch to unconditionally inheriting a pgrp from parents.
This should fix most of #5765, the only remaining question is
tcsetpgrp from builtins.
Prior to this fix, in every call to job_continue, fish would reclaim the
foreground pgrp. This would cause other jobs in the pipeline (which may
have another pgrp) to receive SIGTTIN / SIGTTOU.
Only reclaim the foreground pgrp if it was held at the point of job_continue.
This partially addresses #5765
In tests we would like to arrange for an executable to invoke certain
system calls, e.g. to claim or relinquish control of the terminal. This is
annoying to do portably via e.g. perl. fish_test_helper is a little
program where we can add custom commands to make it act in certain ways.
This set the term modes to the shell-modes, including disabling
ICRNL (translating \cm to \cj) and echo.
The rationale given was that `reader_interactive_init()` would only be
called >= 250ms later, which I _highly_ doubt considering fish's total
startup time is 8ms for me.
The main idea was that this would stop programs like tmuxinator that
send shortcuts early from failing _iff_ the shortcut was \cj, which
also seems quite unusual.
This works both with `rm -i` and `read` in config.fish, because `read`
explicitly calls `reader_push`, which then initializes the shell modes.
The real fix would involve reordering our init so we set up the
modesetting first, but that's quite involved and the remaining issue
should barely happen, while it's fairly common to have issues with a
prompt in config.fish, and the workaround for the former is simpler, so let's leave it for now.
Partially reverts #2578.
Fixes#2980.
Putting larger members before smaller ones will reduce structure
sizes. bools are 1 byte. on 64bit systems I think they reduced:
wgetopt.h:46: 64 to 56 bytes
builtin_history.cpp:30: 48 to 32 bytes
builtin_status.cpp:91: 32 to 24 bytes
tinyexpr.cpp:69: 40 to 32 bytes
The data stored in these containers is small enough that it is worth
creating distinct sets for each lookup.
In a microbenchmark of these changes, the single-lookup version of the
function with lookups gated on the length of input (bypassed entirely if
the input is longer than the longest key in the container) provided a
1.5x-3.5x speedup over the previous implementation.
Additionally, as the collections are static and their contents are never
modified after startup, it makes no sense to continously calculate the
location of and allocate an iterator for the `!= foo.end()` comparison;
the end iterator is now statically cached.
I'm not expecting massive speed gains out of this change, but the parser
does perform enough of these to make it worth optimizing in this way.
This reverts commit 7a74198aa3.
Believe it or not this commit actually increased copying. When accepting
a value you know you're going to take ownership of, just accept it by
value; then temporaries can invoke the move ctor and blah blah blah.
We really need a lightweight refcounted pass-by-value string to make this
less error prone.
If we switch the bind mode, we add a "force-repaint" there just to
redraw the mode indicator.
That's quite wasteful and annoying, considering that sometimes the prompt can take
half a second.
So we add a "repaint-mode" function that just reexecutes the
mode-prompt and uses the cached values for the others.
Fixes#5783.
As it turns out it didn't work much better, and it fell behind in
support when it comes to things that wcwidth traditionally can't
express like variation selectors and hangul combining characters, but
also simply $fish_*_width.
I've had to tell a few people now to rebuild with widecharwidth after
sending them on a fool's errand to set X variable.
So keeping this option is doing our users a disservice.
* Add "expand-abbr" bind function
This can be used to explictly allow expanding abbreviations.
* Make expanding abbr explicit
NOTE: This accepts them for space only, we currently also do it for \n
and \r.
* Remove now dead code
We no longer trigger an abbr implicitly, so we can remove the code
that does it.
* Fix comment
[ci skip]
Directly access the job list without the intermediate job_iterator_t,
and remove functions that are ripe for abuse by modifying a local
enumeration of the same list instead of operating on the iterators
directly (e.g. proc.cpp iterates jobs, and mid-iteration calls
parser::job_remove(j) with the job (and not the iterator to the job),
causing an invisible invalidation of the pre-existing local iterators.
This printed weird things like
```fish
$ functions -x
functions: Unknown option '-x'
(Type 'help functions' for related documentation)
```
Instead, let's make it
```fish
$ functions -x
functions: Unknown option '-x'
(Type 'help functions' for related documentation)
```
This was printed basically everywhere.
The user knows what they executed on standard input.
A good example:
```fish
set c (subme 513)
```
used to print
```
fish: Too much data emitted by command substitution so it was discarded
set -l x (string repeat -n $argv x)
^
in function 'subme'
called on standard input
with parameter list '513'
in command substitution
called on standard input
```
and now it is
```
fish: Too much data emitted by command substitution so it was discarded
set -l x (string repeat -n $argv x)
^
in function 'subme' with arguments '513'
in command substitution
```
See #5434.
Now:
```
cd: Unknown option '-r'
~/dev/fish-shell/share/functions/cd.fish (line 40):
builtin cd $argv
^
in function 'cd' with arguments '-r'
in function 'f'
in function 'd'
in function 'b' with arguments '-1q --wurst'
in function 'a'
called on standard input
```
See #5434.
This printed things like
```
in function 'f'
called on standard input
in function 'd'
called on standard input
in function 'b'
called on standard input
in function 'a'
called on standard input
```
As a first step, it removes the empty lines so it's now
```
in function 'f'
called on standard input
in function 'd'
called on standard input
in function 'b'
called on standard input
in function 'a'
called on standard input
```
See #5434.
This switches env_var_t to be an immutable value type, and stores its
contents via a shared_ptr. This eliminates string copying when fetching
env_var_t values.
If a function process is deferred, allow it to be unbuffered.
This permits certain simple cases where functions are piped to external
commands to execute without buffering.
This is a somewhat-hacky stopgap measure that can't really be extended
to more general concurrent processes. However it is overall an improvement
in user experience that might help flush out some bugs too.
In a job, a deferred process is the last fish internal process which pipes
to an external command. Execute the deferred process last; this will allow
for streaming its output.
I believe this was selected to be artificially low for the sake
of it displaying well in prompts. But people should expect to get
the same output as can be gotten from `hostname`.
Fixes#5758
The code already allowed for variable width (multicell) *display* of the
newline omitted character, but there was no way to define it as being
more than one `wchar_t`.
This lets us use a string on console sessions (^J aka newline feed)
instead of an ambiguous character like `@` (used in some versions of
vim for ^M) or `~` (what we were using).
The system version of `wcwidth()` reflects the capabilities of the
system's own virtual terminal's view of the width of the character in
question, while fish's enhanced version (`widechar_wcwidth`) is much too
smart for most login terminals, which generally barely support anything
beyond ASCII text.
If, at startup, it is detected that we are running under a physical
console rather than within a terminal emulator running in a desktop
environment, take that as a hint to use the system-provided `wcwidth`.
The commit began passing the length of the wide string rather than the
length of the narrowed string after conversion via `wcstombs`. We *do*
have the actual length, but it's not (necessarily) the same as the
original value. We need to pass the result of `wcstombs` instead.
POSIX dictates here that incomplete conversions, like in
printf %d\n 15.2
or
printf %d 14g
are still printed along with any error.
This seems alright, as it allows users to silence stderr to accept incomplete conversions.
This commit implements it, but what's a bit weird is the ordering between stdout and stderr,
causing the error to be printed _after_, like
15
14
15.1: value not completely converted
14,2: value not completely converted
but that seems like a general issue with how we buffer the streams.
(I know that nonfatal_error is a copy of most of fatal_error - I tried
differently, and va_* is weird)
Fixes#5532.
Before this change, - was sorted with other punctuation before
A-Z. Now, it sorts above the rest of the characters.
This has a practical effect on completions, where when there are
both -s and --long with the same description, the short option
is now before the long option in the pager, which is what is now
selected when navigating `foo -<TAB>`. The long options can be
picked out with `foo --<TAB>`. Before, short options which
duplicated a long option literally could not be selected by
any means from the pager.
Fixes#5634
This tweaks wcsfilecmp such that certain punctuation characters will
come after A-Z.
A big win with `set <TAB>` - the __prefixed fish junk now comes
after the stuff users should care about.
This disables an extra round of escaping in the `string replace -r`
replacement string.
Currently, to add a backslash to an a or b (to "escape" it):
string replace -ra '([ab])' '\\\\\\\$1' a
7 backslashes!
This removes one of the layers, so now 3 or 4 works (each one escaped
for the single-quotes, so pcre receives two, which it reads as one literal):
string replace -ra '([ab])' '\\\\$1' a
This is backwards-incompatible as replacement strings will change
meaning, so we put it behind a feature flag.
The name is kinda crappy, though.
Fixes#5474.
As a simple replacement for `wc -l`.
This counts both lines on stdin _and_ arguments.
So if "file" has three lines, then `count a b c < file` will print 6.
And since it counts newlines, like wc, `echo -n foo | count` prints 0.
Mostly related to usage _(L"foo"), keeping in mind the _
macro does a wcstring().c_str() already.
And a smattering of other trivial micro-optimizations certain
to not help tangibly.
C++11 provides std::min/std::max which we're using all over,
obviating the need for our own templates for this.
util.h now only provides two things: get_time and wcsfilecmp.
This commit removes everything that includes it which doesn't
use either; most because they no longer need mini or maxi from
it but some others were #including it unnecessarily.
Hangul uses three codepoints to combine to one glyph. The first has a
width of 2 (like the final glyph), but the second and third were
assigned a width of 1, which seems to match EastAsianWidth.txt:
> 1160..11FF;N # Lo [160] HANGUL JUNGSEONG FILLER..HANGUL JONGSEONG SSANGNIEUN
Instead, we override that and treat the middle and end codepoint as combiners,
always, because there's no way to figure out what the terminal will
think and that's the way it's supposed to work.
If they stand by themselves or in another combination, they'll indeed
show up with a width of 1 so we'll get it wrong, but that's less
likely and not expressible with wcwidth().
Fixes#5729.
This only did prefix matching, which is generally less useful.
All existing users _should_ be okay with this since they want to
provide completions.
Fixes#5467.
Fixes#2318.
This addresses a few places where -Wswitch-enum showed one or two missing
case's for enum values.
It did uncover and fix one apparent oversight:
$ function asd -p 100
echo foo
end
$ functions --handlers-type exit
Event exit
asd
It looks like this should be showing a PID before 'asd' just like
job_exit handlers show the job id. It was falling
through to default: which just printed the function name.
$ functions --handlers-type exit
Event exit
100 asd
This tried to skip conversion if the locale had MB_CUR_MAX == 1, but
in doing so it just entered an infinite recursion (because
writestr(wchar_t*) called writestr(wchar_t*)).
Instead, just let wcstombs handle it.
Fixes#5724.
Since Unicode 9, the width of some characters changed to 2.
Depending on the system, it might have support for it, or it might
not.
Instead of hardcoding specific glibc etc versions, we check what the
system wcwidth says to "😃", U+1F603 "Grinning Face With Big Eyes".
The intention is to, in most cases, make setting $fish_emoji_width
unnecessary, but since it sets the "guessed_emoji_width", that variable still takes precedence if it is set.
Unfortunately this approach has some caveats:
- It relies on the locale being set to a unicode-supporting one.
(C.UTF-8 is unfortunately not standard, so we can't use it)
- It relies on the terminal's wcwidth having unicode9 support IFF the
system wcwidth does.
This is like #5722, but at runtime.
The additional caveat is that we don't try to achieve a unicode
locale, but since we re-run the heuristic when the locale changes (and
we try to get a unicode locale), we should still often get the correct
value.
Plus if you use a C locale and your terminal still displays emoji,
you've misconfigured your system.
Fixes#5722.
Prior to this fix, the wait command used waitpid() directly. Switch it to
calling process_mark_finished_children() along with the rest of the job
machinery. This centralizes the waitpid call to a single location.
It turns out that `string split0` didn't actually ever do any
splitting. The arg_iterator_t already split stdin on NUL, and split0 just
performed an additional search that could never succeed (since
arguments from argv already can't contain NUL).
Let the arg_iterator_t not perform any splitting if asked, and then
let split0 split in 0.
One slight wart is that split0 ignores a trailing NUL, which normal
split doesn't.
Fixes#5701.
This is another case where we used pid when we meant pgroup.
Since 55b3c45f95, the assumption that
both are the same no longer holds in all cases, so this check was wrong.
Might fix#5663.
In fish we play fast and loose with status codes as set directly (e.g. on
failed redirections), vs status codes returned from waitpid(), versus the
value $status. Introduce a new value type proc_status_t to encapsulate
this logic.
prettify_node_recursive is replaced with prettify_node_nrecursive
explicite stack is used instead.
Signed-off-by: Janczar Kurek <janczar.kurek@student.uj.edu.pl>
