Add completions for trash-cli commands:
trash, trash-empty, trash-list, trash-put and trash-restore.
``trash --help`` are used to identify the executable in trash cli completion.
Keeps the location of original function definition, and also stores
where it was copied. `functions` and `type` show both locations,
instead of none. It also retains the line numbers in the stack trace.
Rewrite completions for meson to expose meson commands with their
options and subcommands. New completions are based on the meson 1.0.
Subcommands were introduced in meson 0.42.0 (August 2017), so new
completions will only work for versions after 0.42.0. At this moment,
even oldstable Debian (buster) has meson 0.49.2 -- which means it is
unlikely someone will be affected.
---------
Co-authored-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
By default, fish does not complete files that have leading dots, unless the
wildcard itself has a leading dot. However this also affected completions;
for example `git add` would not offer `.gitlab-ci.yml` because it has a
leading dot.
Relax this for custom completions. Default file expansion still
suppresses leading dots, but now custom completions can create
leading-dot completions and they will be offered.
Fixes#3707.
When we draw the prompt, we move the cursor to the actual
position *we* think it is by issuing a carriage return (via
`move(0,0)`), and then going forward until we hit the spot.
This helps when the terminal and fish disagree on the width of the
prompt, because we are now definitely in the correct place, so we can
only overwrite a bit of the prompt (if it renders longer than we
expected) or leave space after the prompt. Both of these are benign in
comparison to staircase effects we would otherwise get.
Unfortunately, midnight commander ("mc") tries to extract the last
line of the prompt, and does so in a way that is overly naive - it
resets everything to 0 when it sees a `\r`, and doesn't account for
cursor movement. In effect it's playing a terminal, but not committing
to the bit.
Since this has been an open request in mc for quite a while, we hack
around it, by checking the $MC_SID environment variable.
If we see it, we skip the clearing. We end up most likely doing
relative movement from where we think we are, and in most cases it
should be *fine*.
This removes a possibility of an infinite loop where something in
__fish_config_interactive triggers a fish_prompt or fish_read event,
which calls __fish_on_interactive which calls
__fish_config_interactive again, ...
Fixes#9564
This wanted to get the default priority, and it ran a thing *at source
time*.
This can lead to a variety of errors and I don't believe it's all that
useful, so we remove it.
This is an additional tool, and this function is executed on source
time so we'd spew errors.
(also remove an ineffective line - it's probably *nicer* with the
read, but that's not what's currently effectively doing anything)
Separate the neovim completions from the vim ones, as their supported
options have diverged considerably.
Some documented options are not yet implemented, these are added but
commented out.
Closes#9535.
---------
Co-authored-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
This is an easy win for `git add ` completion time if we have multiple descriptions.
What happened was we did things once per description string, but the
things included a bunch of computation (including multiple `string`
calls and even a `realpath`!). Because these don't change, we can
simply do them once.
And it turns out we can just use a cartesian product:
for d in $desc
printf '%s\t%s\n' $file $d
end
becomes
printf '%s\n' $file\t$desc
I have no idea why `apt-cache --no-generate show` is so slow since it basically
dumps the contents of the cache file located at `/var/lib/dpkg/status`. We are
technically bypassing any waits on the cache lock file so this may produce
incorrect results if the cache is being regenerated in the moment, but that's a
small price to pay and the results are likely confined to simply not generating
comprehensive results.
With this change, we no longer need to truncate results to the first n matches
and we no longer only print packages beginning with the commandline argument
enabling fish's partial completions logic to offer less-perfect suggestions when
no better options are available.
Even though we are generating more usable completions, we still trounce the old
performance by leaps and bounds:
```
Benchmark #1: fish -c "complete -C\"apt install ac\""
Time (mean ± σ): 2.165 s ± 0.033 s [User: 267.0 ms, System: 1932.2 ms]
Range (min … max): 2.136 s … 2.256 s 10 runs
Benchmark #2: build/fish -c "complete -C\"apt install ac\""
Time (mean ± σ): 111.1 ms ± 1.8 ms [User: 38.9 ms, System: 72.9 ms]
Range (min … max): 108.2 ms … 114.9 ms 26 runs
Summary
'build/fish -c "complete -C\"apt install ac\""' ran
19.49 ± 0.44 times faster than 'fish -c "complete -C\"apt install ac\""'
```
I think this should be preferred for all subcommand completions because it
handles typos or subcommands we don't recognize better (`apt foo <TAB>` no
longer suggests subcommands since the subcommand position has been taken).
- Added phx completions. These are very common completions for the Elixir Phoenix Framework.
Documentation can be found here: https://hexdocs.pm/phoenix/1.7.0-rc.2/Mix.Tasks.Local.Phx.html#content
- Added argument completions
- Made all descriptions start with an uppercase for better consistency
- Update CHANGELOG.rst
The `cmake` meta package pulls in `cmake-core`, `cmake-docs`, and `cmake-man` -
we don't need the latter two.
(It seems to be available on all the versions/architectures we target.)
The git-lite flavor, being significantly smaller and downloading/installing much
faster with fewer dependencies, is much better suited for CI environments (at
the cost of not supporting interactive git commands).
By default /etc/pkg/FreeBSD.conf uses either the /quarterly or /latest pkg
builds, which are built against the latest minor release of FreeBSD for the
given ${ABI} string at the time they were last updated.
The nature of the shared binary packages means everyone (across all minor
versions of the same major version on the same architecture, all of which share
the same stable ABI) gets the same binary build.
There are however packages which depend on symbols exported by system-provided
libraries (rather than by other packages, which are always going to be in sync)
that *aren't* stable across minor releases, leaving packages like llvm
broken if you install the latest llvm from pkg's binary repos built against,
say, FreeBSD 13.1 while running FreeBSD 13.0.
The other option is to use the "snapshots" of the binary packages available upon
the release of each minor version, by using /release_0, /release_1, etc instead
of /quarterly or /latest, but then you're limited to the ports that were
available at that specific date and those old versions.
tl;dr just make sure we're always using the latest minor release for each major
version of FreeBSD we intend to support.
In v3 several input parameters where renamed and since v4 it requires Node.js 16.
This resolves warnings about Node.js 12 and `set-output` being deprecated and
slated for removal in the `Lock threads` workflow.
This addresses the node v12 deprecation warning in the GitHub CI, caused by the
dependency on actions/checkout@v2.
While actions/checkout@v3 introduces some new features and changes some
defaults, the subset of features that we use should not be affected by this
migration.
The "breaking change" from v2 to v3 can be seen at [0]. Since we are tracking
only v2 without a dot release specified, we are already opting into any breakage
across minor versions, so really the only change of note is the node version
upgrade.
[0]: https://github.com/actions/checkout/compare/v2.4.2...v3.0.0
This translated ctrl-k to "\v", which is a "vertical tab", and ctrl-l
to "\f" and ctrl-g to "\a".
There is no "vertical tab" or "alarm" or "\f" *key*, so these
shouldn't be translated. Just drop these and call them `\ck` and such.
(vertical tab specifically is utterly useless and I would be okay with
dropping it entirely, I have never seen it used anywhere)
That commit did way too many things, making it hard to see the 5 regressions
it introduced. Let's revert it and its stragglers. In future, we could redo
some of the changes.
Reverts changes to share/completions/git.fish from
- 3548aae55 (completions/git: Don't leak submodule subcommands, 2023-01-23)
- 905f788b3 (completions/git: Remove awkward newline symbol, 2023-01-10)
- 2da1a4ae7 (completions/git: Fix git-foo commands, 2023-01-09)
- e9bf8b9a4 (Run fish_indent on share/completions/*.fish, 2022-12-08)
- d31847b1d (Fix apparent dyslexia, 2022-11-12)
- 054d0ac0e (git completions: undo mistaken `set -f` usage, 2022-10-28)
- f5711ad5e (git.fish: collapse repeat complete cmds, set -f, rm unneeded funcs, 2022-10-27)
Bracketed paste adds one undo entry unless the pasted text contains a '
or \. This is because the "paste" bind-mode has bindings for those keys,
so they effectively start a new undo entry.
Let's fix this by adding an explicit undo group (our first use of this
feature!).
