We were passing a slice (and not a vec) to `CString::new()`, meaning it would
allocate a new Vec internally to hold the bytes.
Also document that the resulting CString will be silently truncated at the first
interior NUL.
The function was repeatedly calling `s.char_at(n)` which is O(1) only for UTF-32
strings (so not a problem at the moment). But it was also calling `hex_digit(n)`
twice for each `n` in the 3-digit case, causing unnecessary repeated parsing of
individual characters into their radix-16 numeric equivalents, which could be
avoided just by reusing the already calculated result.
We will continue to use the "normal" fish base directory detection when using
the CMake test harness which properly sets up a sandboxed $HOME for fish to use,
but when running source code tests with a bare `cargo test` we don't want to
write to the actual user's profile.
This also works around test failures when running `cargo test` under CI with a
locked-down $HOME directory (see #10474).
The test_history_formats test was reading from build/tests/ which is an artifact
of the cmake test runner. The source code tests should not depend on the cmake
test harness at all, so this is changed to read from the original test source in
the ./tests/ directory instead.
As documented in #10474, there are issues with 64-bit floating point rounding
under x86 targets without SSE2 extensions, where x87 floating point math causes
imprecise results.
Document the shortcoming and provide some version of the test that passes
regardless of architecture.
FISH_BUILD_DIR (nominally, ./build) is created by cmake. If you only check out
the project via git and then run `cargo build`, this directory won't exist and
many of the tests will fail.
%ld expects a 4-byte parameter on 32-bit architectures and an 8-byte parameter
on 64-bit architectures, but we supplied are trying to supply a 64-bit parameter
that would overflow 32-bit storage.
Use %lld instead which expects a `long long` parameter, which should be 8-bytes
under both architectures.
See #10474
I think given a local terminal running fish on a remote system, we can't
assume that an input sequence like \ea is sent all in one packet. (If we
could that would be perfect.)
Let's readd the default escape delay, to avoid a potential regression, but
make it only apply to raw escape bindings like "bind \e123". Treat sequences
like "bind escape,1,2,3" like regular sequences, so they can be bound on
all terminals.
This partially reverts commit b815319607.
Given "abbr foo something", the input sequence
foo<space><ctrl-z><space>
would re-expand the abbreviation on the second space which is surprising
because the cursor is not at or inside the command token. This looks to be
a regression from 00432df42 (Trigger abbreviations after inserting process
separators, 2024-04-13)
Happily, 69583f303 (Allow restricting abbreviations to specific commands
(#10452), 2024-04-24) made some changes that mean the bad commit seems no
longer necessary. Not sure why it works but I'll take it.
As reported on gitter, commands like "rm (...)" sometimes want a previous
command inside the parentheses. Let's try that. If a user actually wants
to search for a command substitution they can move the cursor outside the
command substitution, or type the search string after pressing ctrl-r?
On a command with multiline quoted string like
begin
echo "line1
line2"
end
we actually indent line2 which seeems misleading because the indentation
changes the behavior when typed into a script.
This has become more prominent since commits
- a37629f86 (fish_clipboard_copy: indent multiline commands, 2024-04-13)
- 611a0572b (builtins type/functions: indent interactively-defined functions, 2024-04-12)
- 222673f33 (edit_command_buffer: send indented commandline to editor, 2024-04-12)
which add indentation to an exported commandline.
Never indent quoted strings, to make sure the rendering matches the semantics.
Note that we do need to indent the opening quote which is fine because
it's on the same line.
While at it, indent command substitutions recursively. That feature should
also be added to fish_indent's formatting mode (which is the default).
Fortunately the formatting mode already works fine with quoted strings;
it does not indent them. Not sure how that's done and whether indentation
can use the same logic.
Given "1(23)4", this function returns an inclusive range, from the opening
to the closing parenthesis. The subcommand is extracted by incrementing
the range start and interpreting the result as an exclusive range.
This is confusing, especially if we want to add multi-character quotes.
Change it to always return the full range (including parentheses) and provide
an easy way to access the command string.
While at it, switch to returning an enum.
This change is perhaps larger and more complex than necessary (sorry)
because it is mainly made with multi-character quotes in mind. Let's see
if that works out.
This removes IsOkAnd and the is_some_and method.
I cannot actually find is_none_or in the stdlib?
I've kept the trait name to avoid changing it now and then later, maybe this should
be moved elsewhere to avoid claiming it's an stdlib thing?
After abandoning a commandline (for example with ctrl-c) it's nice to be
able to restore it. There is little reason to discard the requisite undo
information, so keep it.
This allows making something like
```fish
abbr --add gc --position anywhere --command git back 'reset --hard
HEAD^'
```
to expand "gc" to "reset --hard HEAD^", but only if the command is
git (including "command git gc" or "and git gc").
Fixes#9411
Running
echo foo | vim -
gets us in a weird situation because we put the job in fish's process groups.
It causes us to not set a PGID for this job, so it can't be resumed among
other things.
Stopping the job with ctrl-z and try to exit the shell causes a crash in the
"There are still jobs active" warning because the PID for the job is still 0.
Let's remove the assertion to restore previous behavior, and hopefully fix
this later.
Remove the last non scoped place where we disable protocols (just before
exec(1)); it's not necessary with the current approach because we always
disable inside eval.
There is an edge case where we don't:
fish -ic "exec bash"
leaving bash with CSI u enabled. Disable that also in -ic mode where we
don't have a reader.
In future we should use the same approach for restore_term_mode() but I'm
not sure which one is better.
We enable terminal protocols once at startup, and disable them before exit.
Additionally, we disable them while evaluating commands (see 8164855b7 (Disable
terminal protocols throughout evaluation, 2024-04-02))..
Thirdly, we re-enable protocols inside builtin read (where it's disabled
because we are evaluating something). All of these three are scoped and
statically guaranteed to not leak into each others scopes.
There is another place where we enable protocols non-scoped: when we
receive a notification that a job is stopped. If this is ever hit, things
will be imbalanced and we'll fail to restore the right terminal state,
or (more likely) crash due the assertion in terminal_protocols_enable().
This code path used to be necessary when we disabled protocols only while
actually executing an external command but we changed that in 8164855b7,
so it should no longer be. Remove it.
I haven't been able to find a test case, I'll try to do that later.
The main reason we changed the scope of protocols was focus reporting (#10408).
We have given up on that for now (outside tmux where I can't get it to work)
so we might want to reconsider and go back to the "optimized" approach of
enabling it for as long as possible. But this is simpler, easier to verify.
This tries to open the given file to use as stdin, and if it fails,
for any reason, it uses /dev/null instead.
This is useful in cases where we would otherwise do either of these:
```fish
test -r /path/to/file
and string match foo < /path/to/file
cat /path/to/file 2>/dev/null | string match foo
```
This both makes it nicer and shorter, *and* helps with TOCTTOU - what if the file is removed/changed after the check?
The reason for reading /dev/null instead of a closed fd is that a closed fd will often cause an error.
In case opening /dev/null fails, it still skips the command.
That's really a last resort for when the operating system
has turned out to be a platypus and not a unix.
Fixes#4865
(cherry picked from commit df8b9b7095)
This introduces a feature flag, "test-require-arg", that removes builtin test's zero and one argument special modes.
That means:
- `test -n` returns false
- `test -z` returns true
- `test -x` with any other option errors out with "missing argument"
- `test foo` errors out as expecting an option
`test -n` returning true is a frequent source of confusion, and so we are breaking with posix in this regard.
As always the flag defaults to off and can be turned on. In future it will default to on and then eventually be made read-only.
There is a new FLOG category "deprecated-test", run `fish -d deprecated-test` and it will show any test call that would change in future.
This is similar to f7dac82ed (Escape separators (colon and equals) to improve
completion, 2019-08-23) except we only escape : and = if they are the result of
file completions. This way we avoid issues with custom completions like dd.
This also means that it won't work for things like __fish_complete_suffix
[*] but that can be fixed later, once we can serialize the DONT_ESCAPE flag.
By moving the escaping step earlier, this causes some unit test changes
which should not result in actual behavior change.
See also #6099
[*]: The new \: and \= does not leak from "complete -C" because that command
unescapes its output -- unless --escape is given.
Another consequence of a583fe723 ("commandline -f foo" to skip queue
and execute immediately, 2024-04-08) is that "commandline -f repaint"
will paint the prompt with the current value of $status which might be
set from a shell command in a the currently executing binding, instead of
waiting for the top-level status. This is wrong, at least historically. It
surfaces in bindings like alt-w which always paint a status value of [1]
when on single-lines commandlines.
Another regression is that a redundant repaint in a signal handler outputs
an extra prompt.
Fix both by making repaint commands go over the input queue again. This way,
they are always run with a good commandline state. There is no need to
repaint immediately because I don't think anyone has a data dependency on it
(we currently don't expose the prompt string), it's only for rendering.
We sometimes leak ^[[I and ^[[O focus reporting events when run from VSCode's
"Run python file" button in the top right corner. To reproduce I installed
the ms-python extension set the VSCode default shell to fish and repeatedly
ran a script that does "time.sleep(1)". I believe VSCode synthesizes keys
and triggers a race condition.
We can probably fix this but I'm not sure when I'll get to it (given how
relatively unimportant this feature is).
So let's go back to the old behavior of only enabling focus reporting in tmux.
I believe that tmux is affected by the same VSCode issue (also on 3.7.1 I
think) but I haven't been able to get tmux to emit focus reporting sequences
yet. Still, keep it to not regress cursor shape (#4788). So far this is
the only motivation for focus reporting and I believe it is only relevant
for terminals that can split windows (though there are a bunch that do).
Closes#10448
While it does need to store the string, we also need to use the string after
storing it, so we aren't getting any advantage from passing by value. Just pass
by reference to simplify the call sites.
This is another problem that has been bothering me for years: as mentioned
in 1dd901e52 (Maintain cursor in history prefix search, 2024-04-12), up-arrow
search highlights search matches but the contrast is really bad, especially in
command position, because the search matches --background=brblack is combined
with whatever foreground syntax highlighting the command has. The history
pager had a similar problem (for the selected history item) but circumented
it by disabling syntax highlighting altogether for the selected item.
fish_color_search_match's foreground component is ignored.
Let's use it instead of syntax highlighting.
This fixes the contrast on some default colorschemes but the bryellow
foreground looks weirdly like an error/warning on some terminals. Change it
to white. This needs a hack because we don't have a canonical way to tell
if a uvar has been set by the user. Fortunately the foreground component
hasn't been used at all so far, so we're not so much changing it as much as
initializing it.
On Konsole with
function my-bindings
bind --preset --erase escape
bind escape,i 'echo escape i'
end
set fish_key_bindings my-bindings
the "escape,i" binding doesn't trigger. This is because of our special
handling of the escape key prefix. Other multi-key bindings like "bind j,k"
wait indefinitely for the second character. But not "escape,i"; that one
has historically had a low timeout (fish_escape_delay_ms). The motivation
is probably that we have a "escape" binding as well that shouldn't wait
indefinitely.
We can distinguish between the case of raw escape sequence binding like "\e123"
and a binding that talks about the actual escape key like "escape,i". For the
latter we don't need the special treatment of having a low timeout, so make it
fall back to "fish_sequence_key_delay_ms" which waits indefinitely by default.
When we read bytes like \xfc that don't produce a Unicode code point,
we encode them in a Unicode private use area.
This encoding should be transparent to the user.
We accidentally add it to uvar files as \uf6fc in this case. When reading
it back, read_unquoted_escape() will fail at the "fish_reserved_codepoint(c)"
check. This check is to avoid external input being misinterpreted
as one of our in-band signalling characters like ANY_CHAR (for *).
For encoded raw bytes, this check probably doesn't really matter in terms of
security because the only thing we do with these bytes is convert them back
to raw. So we could allow unescaping them at this point, thus supporting
old uvar files.
However that seems like the wrong direction. PUA encoding should never leak.
So let's instead make sure to serialize it as \xfc instead of \f6fc going
forward.
Fixes#10313
Popular operating systems support shift-delete to delete the selected item
in an autocompletion widgets. We already support this in the history pager.
Let's do the same for up-arrow history search.
Related discussion: https://github.com/fish-shell/fish-shell/pull/9515
On
a;
we don't expand the abbreviation because the cursor is right of semicolon,
not on the command token. Fix this by making sure that we call expand-abbr
with the cursor on the semicolon which is the end of the command token.
(Now that our bind command execution order is less surprising, this is doable.)
This means that we need to fix the cursor after successfully expanding
an abbreviation. Do this by setting the position explicitly even when no
--set-position is in effect.
An earlier version of this patch used
bind space self-insert backward-char expand-abbr or forward-char
The problem with that (as a failing test shows) was that given "abbr m
myabbr", after typing "m space ctrl-z", the cursor would be after the "m",
not after the space. The second space removes the space, not changing the
cursor position, which is weird. I initially tried to fix this by adding
a hack to the undo group logic, to always restore the cursor position from
when begin-undo-group was used.
bind space self-insert begin-undo-group backward-char expand-abbr end-undo-group or forward-char
However this made test_torn_escapes.py fail for mysterious reasons.
I believe this is because that test registers and triggers a SIGUSR1 handler;
since the signal handler will rearrange char events, that probably messes
with the undo group guards.
I resorted to adding a tailor-made readline cmd. We could probably remove
it and give the new behavior to expand-abbr, not sure.
Fixes#9730
File names that have lots of spaces look quite ugly when inserted as
completions because every space will have a backslash.
Add an initial heuristic to decide when to use quotes instead of
backslash escapes.
Quote when
1. it's not an autosuggestion
2. we replace the token or insert a fresh one
3. we will add a space at the end
In future we could relax some of these requirements.
Requirement 2 means we don't quote when appending to an existing token.
Need to find a natural behavior here.
Re 3, if the completion adds no space, users will probably want to add more
characters, which looks a bit weird if the token has a trailing quote.
We could relax this requirement for directory completions, so «ls so»
completes to «ls 'some dir with spaces'/».
Closes#5433
On Konsole, given
bind escape,i 'echo escape i'
bind alt-i 'echo alt-i'
pressing alt-i triggers the wrong binding. This is because we treat "escape
followed by i" as "alt-i". This is to support raw sequences like "\ei"
which are probably meant as "alt-i" -- we match such inputs to both mappings.
This double matching is not necessary for new-style bindings which
unambiguously describe the key presses, so let's activate this sequence
matching only for bindings specified as raw sequences.
Conversely, we currently fail to match an XTerm raw binding for ctrl-enter:
echo 'XTerm.vt100.formatOtherKeys: 0' | xrdb
xterm -e fish
bind \e\[27\;5\;13~ execute
because we decode this to a single char; we match the leading CSI but not
the entire sequence. So this is a raw binding where we accidentally
match full, modified keys. Fix that too (two birds with one stone).
I think commit 8386088b3 (Update commandline state changes eagerly as well,
2024-04-11) broke the alt-s binding.
This is because we update the commandline state snapshot (which is consumed
by builtin commandline and others) only at key points. This seems like a
dubious optimization. With the new streamlined bind execution semantics,
this doesn't really work anymore; any shell command can run any number of
commands like "commandline -i foo" which should synchronize.
Do the simple thing of calculating the snapshot whenever needed.
The search term highlighting looks looks really bad on the default theme
because the command is highlighted as dark blue and the search term adds
a dark background. If this new feature motivates us to finally fix this,
that would be great.
Closes#10430
The new reader_execute_readline_cmd() runs apply_commandline_state_changes()
to make sure that given
bind x "commandline --insert foo; commandline -f backward-char"
the backward-char command knows about the insertion of "foo". This
causes problems when running "sleep 1&" and typing some characters -
the commandline will be cleared when the job finishes. This is because
apply_commandline_state_changes() works with stale information in this case.
Let's call it as soon as we know it's needed. This is less messy and fits
better with the new bind function semantics ("execute things in the order
they are written").
This makes them more convenient to use interactively, similar to the existing
\c and \a versions. The resulting bind output keeps using the canonical
ctrl/alt version.
Not sure about s- because that's somewhat ambiguous, it could be "super".
See the parent commit for some context. Turns out that 8bf8b10f6 (Extended &
human-friendly keys, 2024-03-30) broke this for terminals that speak CSI u.
This is pretty complex, probably not worth it.
When a terminal sends \x1ba, that could be either escape,a or alt-a.
Historically we've handled this with an escape delay that defaults to 30
milliseconds. If we read nothing for that time, it's escape. Otherwise it's
an alt modifier (or an escape sequence).
As a side effect of 8bf8b10f6 (Extended & human-friendly keys, 2024-03-30) we
added a new way of disambiguating escape: whenever we read the escape byte,
we immediately try another (nonblocking) read. If it succeeds, we treat it
as modifier, else it's escape. Before that commit, we didn't have a concept
of modifiers.
The new way works fine for disambiguating escape,a from alt-a (as pressed
by the user) because only for alt-a the data is sent in the same packet.
So we no longer need the escape delay to disambiguate the alt from the
escape key. Let's simplify things by not using it by default.
The escape delay as set by fish_escape_delay_ms also serves another purpose;
it allows to disambiguate "escape,a" from "escape (pause) a". For that use
case we want to keep it.
As mentioned in 8a7c3ceec (Don't abandon line after writing control sequences,
2024-04-06) we need to freshed stdout timestamps after writing to stdout
but before we might redraw, in particular when writing control sequences.
Commit a583fe723 ("commandline -f foo" to skip queue and execute immediately,
2024-04-08) made "commandline -f repaint" redraw immediately, while still
executing the bound shell command; at that time we have written "disabling"
sequences but not refreshed timestamps yet, so do that.
This is probably not needed for commands outside the repaint family.
Needless to say that this is messy, maybe we can simplify things in future.
Ref https://github.com/fish-shell/fish-shell/issues/10409#issuecomment-2044863817
If a key's codepoint is in the PUA1 range, it could
be either from our own named keys (like key::Space)
or from a CSI u key that we haven't assigned a name yet
https://sw.kovidgoyal.net/kitty/keyboard-protocol/#functional-key-definitions
(The latter can still be bound using the \u1234 or the equivalent \e[4660u
raw CSI u sequence.)
It doesn't make sense to insert a PUA character into the commandline when
the user presses PrintScreen; ignore them silently.
This partially reverts b77d1d0e2 (Stop crashing on invalid Unicode input,
2024-02-27). That commit did:
1. convert input byte sequences that map to a PUA codepoint into several
characters, using our on-char-per-byte PUA encoding.
2. do the same for inputs that are codepoints outside the valid Unicode range.
3. render them as replacement character (one per input byte)
In future, we should probably remove these features altogether, and simply
ignore invalid Unicode code points.
Commit c3cd68dda (Process shell commands from bindings like regular char
events, 2024-03-02) mentions a "weird ordering difference".
The issue is that "commandline -f foo" goes through the input
queue while other commands are executed directly.
For example
bind ctrl-g "commandline -f end-of-line; commandline -i x"
is executed in the wrong order. Fix that.
This doesn't yet work for "commandline -f exit" but that can be fixed easily.
It's hard to imagine anyone would rely on the existing behavior. "commandline
-f" in bindings is mostly used for repainting the commandline.
If a binding was input starting with "\e", it's usually a raw control sequence.
Today we display the canonical version like:
bind --preset alt-\[,1,\;,5,C foo
even if the input is
bind --preset \e\[1\;5C foo
Make it look like the input again. This looks more familiar and less
surprising (especially since we canonicalize CSI to "alt-[").
Except that we use the \x01 representation instead of \ca because the
"control" part can be confusing. We're inside an escape sequence so it seems
highly unlikely that an ASCII control character actually comes from the user
holding the control key.
The downside is that this hides the canonical version; it might be surprising
that a raw-escape-sequence binding can be erased using the new syntax and
vice versa.
We don't yet support all keys from
https://sw.kovidgoyal.net/kitty/keyboard-protocol/#functional-key-definitions
Instead of displaying a private-use character, show the character code;
this can be used to map the key even if we don't know a name for it.
bind \uE011 'echo print screen'
bind ctrl-\uE011 'echo do control + print screen'
Note that it's also possible to mape the raw CSI u sequence, like
bind \e\[57361u 'echo print screen'
but we should not encourage that syntax because it does not allow adding
the modifiers like ctrl.
Of course leaking the PUA character code is not ideal.
As implied by the changelog.
Unfortunately it's not obvious how to access the RefCell value in spite
of a potential (albeit unlikely) present mutable borrow. We need to use a
different type to make it work in such cases, hopefully doing that in future.
In future we could even use panic=abort and use this style of cleanup for
panics (instead of RAII).
For numpad 1 with nulock, Alacritty sends
escape,[,5,7,4,0,0,u
which is codepoint \x31, key "1". We have a terminfo mapping for "sright"
which translates to
escape,[,1,;,2,C
The first two characters, escape and [ match. Then we accidentally match the
"1" from the mapping against the entire sequence, because that sequence is
canonicalized to codepoint "1" . The most blatant problem is that we discard
the rest of the sequence. Fix that.
This allows us to re-enable raw CSI u mappings like "bind \e[1u ..."
which is what kitty uses for shell integration.
This allows terminals like foot and kitty to
* scroll to the previous/next prompt with ctrl-shift-{z,x}
* pipe the last command's output to a pager with ctrl-shift-g
Kitty has existing fish shell integration
shell-integration/fish/vendor_conf.d/kitty-shell-integration.fish which we
can simplify now. They keep a state variable to decide which of prompt start,
command start or command end to output. I think with our implementation
this is no longer necessary, at least I couldn't reproduce any difference.
We also don't need to hook into fish_cancel or fish_posterror like they do;
only in the one place where we actually draw the prompt.
As mentioned in the above shell integration script, kitty disables reflow
when it sees an OSC 133 marker, so we need to do it ourselves,
otherwise the prompt will go blank after a terminal resize.
Closes#10352
Commit 8164855b7 (Disable terminal protocols throughout evaluation, 2024-04-02)
changed where we output control sequences (to enable bracketed paste and CSI).
Likewise, f285e85b0 (Enable focus reporting only just before reading from
stdin, 2024-04-06) added control sequence output just before we read().
This output causes problems because it invalidates our stdout/stderr
timestamps, which causes us to think that a rogue background process wrote
to the terminal; we react by abandoning the current line and redrawing the
prompt below. Our fix was to refresh the TTY timestamps after we run a bind
command that might add stdout (#3481).
Since commit c3cd68dda (Process shell commands from bindings like regular
char events, 2024-03-02), this timestamp refresh logic is in the wrong place;
shell commands are run later now; we could move it but wait -
... we also need to make sure to refresh timestamps after outputting control
sequences. Since bracketed paste is enabled after CSI u, we can skip the
latter. Additionally, since we currently output control sequences before
every single top-level interactive command, we no longer need to separately
refresh timestamps in between commands.
Fixes#10409
Some terminals send the focus-in sequences ("^[I") whenever focus reporting is
enabled. We enable focus reporting whenever we are finished running a command.
If we run two commands without reading in between, the focus sequences
will show up on the terminal.
Fix this by enabling focus-reporting as late as possible.
This fixes the problem with `^[I` showing up when running "cat" in
gnome-terminal https://github.com/fish-shell/fish-shell/issues/10411.
This begs the question if we should do the same for CSI u and bracketed paste.
It's difficult to answer that; let's hope we find motivating test cases.
If we enable CSI u too late, we might misinterpret key presses, so for now
we still enable those as early as possible.
Also, since we now read immediately after enabling focus events, we can get
rid of the hack where we defer enabling them until after the first prompt.
When I start a fresh terminal, the ^[I no longer shows up.
It's not clear whether builtin read should be able to do everything
that the normal prompt does but I guess we haven't found a problem yet.
Given that read could be used to read a single character at a type,
it's a bit odd to toggle terminal protocols all the time.
But that's not the typical case (at least not for when stdin is a TTY),
and it seems fine.
Teste with
bind ctrl-4 'echo yay'
Regressed in 8164855b7 (Disable terminal protocols throughout evaluation,
2024-04-02).
Apparently VTE terminals send the "focus in" event whenever we re-enable
focus reporting. That's probably a sensible thing to do.
Anyway, our problem is simply that we accidentally end history search on these
focus events which are implemented as anonymous (unmappable) readline cmds.
Perhaps there should be a separate cmd category.
Focus events show up as key::Invalid which is a weird private use code point;
probably we can get rid of this key..
Fixes#10411
See the changelog additions for user-visible changes.
Since we enable/disable terminal protocols whenever we pass terminal ownership,
tests can no longer run in parallel on the same terminal.
For the same reason, readline shortcuts in the gdb REPL will not work anymore.
As a remedy, use gdbserver, or lobby for CSI u support in libreadline.
Add sleep to some tests, otherwise they fall (both in CI and locally).
There are two weird failures on FreeBSD remaining, disable them for now
https://github.com/fish-shell/fish-shell/pull/10359/checks?check_run_id=23330096362
Design and implementation borrows heavily from Kakoune.
In future, we should try to implement more of the kitty progressive
enhancements.
Closes#10359
To do so add an ad-hoc "commandline --search-field" to operate on pager
search field.
This is primarily motivated because a following commit reuses the
fish_clipboard_paste logic for bracketed paste. This avoids a regression.
Terminal titles are set with an OSC 0 sequence. I don't think we want to
support terminals that react badly to unknown OSC (or CSI) sequences.
So let's remove our feature detection.
This will fix future false negatives along the lines of
https://github.com/fish-shell/fish-shell/pull/10037
This binding is akin to ForwardSingleChar but it is "passive" in that is not
intended to affect the meta state of the shell: autocompletions are not accepted
if the cursor is at the end of input and it does not have any effect in the
completions pager.
Currently, we expand command-abbrs (those with `--position command`) after `if`, but not after `command` or `builtin` or `time`:
```fish
abbr --add gc "git checkout"
```
will expand as `if gc` but not as `command gc`.
This was explicitly tested, but I have no idea why it shouldn't be?
The incorrect order of operations was being used since && binds tighter than ||
in rust (as with most sane languages).
Under Linux, EAGAIN == EWOULDBLOCK so this would always succeed in the case of a
non-blocking fd without making the call to make_fd_nonblocking().
Comparing to the 3.7.0 C++ code, it looks like this was an oversight introduced
in the migration to rust.
In particular, this allows restoring the terminal on crashes, which is
feasible now that we have the panic handler. Since std::process::exit() skips
destructors, we need to reshuffle some code. The "exit_without_destructors"
semantics (which std::process::exit() als has) was mostly necessary for C++
since Rust leaks global variables by default.
When fish crashes due to a panic, the terminal window is closed. Some
terminals keep the window around when the crash is due to a fatal signal,
but today we don't exit via fatal signal on panic.
There is the option to set «panic = "abort"» in Cargo.toml, which
would give us coredumps but also worse stacktraces on stderr.
More importantly it means that we don't unwind, so destructors are skipped
I don't think we want that because we should use destructors to
restore the terminal state.
On crash in interactive fish, read one more line before exiting, so the
stack trace is always visible.
In future, we should move this "read one line before exiting" logic to where
we call "panic!", so I can attach a debugger and see the stacktrace.
Today fish_cursor_selection_mode controls whether selection mode includes
the cursor. Since it's by default only used for Vi mode, perhaps use it to
also decide whether it should be allowed to select one-past the last character.
Not allowing to select to select one-past the last character is much nicer
in Vi mode. Unfortunately Vi mode sometimes needs to temporarily select
past end (using forward-single-char and such), so reset fish_cursor_selection_mode
for the duration of the binding.
Also fix other things like cursor placement after yank/yank-pop.
Closes#10286Closes#3299
