This was an undocumented undunderscored function that wouldn't be
super useful to actually use manually (because it still checked if the
variable was set!). It also relied on `__init_uvar`, which was only
set in `__fish_config_interactive`.
Additionally it didn't remove any complexity because this was all very
simple "do thing a, do thing b, do thing c" stuff. It added a layer of
indirection instead, and made fish startup dependent on another
function.
If you want to reset your colorscheme to the default, use fish_config.
- Use named colors instead of hex values - not sure how this
happened in the first place, these all map to basic named colors.
- Reinitialize if these were last set on fish <3.4, new variables
have been added.
- Break this into a separate function for the sake of
__fish_config_interactive complexity, and allow for running
manually.
GNU tr is not Unicode-aware, and was corrupting descriptions that had
non-ASCII characters.
Additionally, rather than using the Unicode private use characters, use
the ASCII/UTF-8 record separator character as it was intended.
The sed command could probably be rewritten to do all the heavy lifting
here, but would be even less readable.
Closes#8575.
fish_git_prompt may run certain git commands which may invoke certain
external programs as specified `.git/config`. Prevent this by suppressing
certain git config options.
This looked at __fish_print_commands, which goes via our man pages to
find the commands (it shouldn't, buuut), and exludes a hard-coded list
of pages.
So we do two thigns:
1. We add the other doc pages to the list
2. We check commands *later* - if we listed something explicitly it
should be used
This was supposed to act like `type -q` or `command -q`, in that it
returns 0 if at least 1 exists.
But because it used the wrong variable it didn't.
Fixes#8431.
Foot has several terminfos:
* foot - the default one
* foot-direct - 24-bit color terminfo, similar to xterm-direct (used by e.g. emacs)
* foot-extra - alternative to the ncurses provided terminfo, with a couple of extra, non-standard
capabilities
* foot-extra-direct - 24-bit color version of the above
There may also be other distro-custom terminfo names (serving the same purpose as foot-extra*)
This is nroff/groff being broken. It turns "→" into "â". This is even if we select `-Tutf8` and friends.
So, if mandoc exists, we prefer that, and otherwise, run preconv on
the file first (if it exists).
Really, what we would need to to is tell nroff to pass `-KUTF-8` to
groff, but that doesn't appear to be possible.
- Introduce BUILTIN_ERR_COMBO2_EXCLUSIVE
- Distill generally more terse, unambiguous error descriptions.
Remember English is not everyone's language.
- Do not capitalize sentence fragments
- Use the modality where problem input is in a %s: prefix, then
is explained.
- Do not address the user (the "You cannot do ..." kraderism)
- Spell out 'arguments' rather than 'args' for consistency
- Mention 'function' as a scope
In 'simple terminal' the delete key prints \e[P by default, which is
related to the different approach the authors of st are taking on the
matter of shell configuration. The main problem is the malfunction of
the delete key, so we have to use a workaround like this.
* Hide whatis database building from the user
It's really an internal detail, but shows up in prompts that display how many
background jobs are running.
By disowning it keeps running but won't show up in `jobs` or get killed if the user
exits the shell.
* Update __fish_apropos.fish
The less -F / --quit-if-one-screen option is buggy before v530. To work
around this, pass --no-init less versions older than 530.
The --no-init option was previously passed; it was removed in d15a51897d
for mouse support. Unfortunately it looks like we can't have mouse
support and --quit-if-one-screen on macOS shipped less (version 487).
It's worth fixing this because otherwise history and help is just not
printed on stock macOS.
Relevant is https://unix.stackexchange.com/questions/107315/less-quit-if-one-screen-without-no-initFixes#8157.
Commit c3374ffd0 ("Use read --tokenize instead of eval for $BROWSER &
$EDITOR") converted uses of "eval" for environment variables to use the
safer "read -at", which performs word splitting but no other expansion.
funced contained a leftover instance of "eval". Remove it in favor
of using the editor command that was already word-split.
This means that we don't accidentally evaluate the file name.
(Also "set -gx EDITOR=~/my-editor" won't work anymore because the ~
is not expanded anymore but no one has complained about that behavior
in edit_command_buffer.)
Fixes#8289
*Problem:*
edit_command_buffer uses `cat` to return the modified content.
If a person has an alias for `cat` to a different command such `bat`** the editing will not be useful anymore since bat decorates the text with frames, line counts, etc
*Solution*
Appending command to cat, fish will ignore the alias and execute the real command according to this https://fishshell.com/docs/current/cmds/command.html
** https://github.com/sharkdp/bat
This should add all the sections that aren't linked internally,
including "identifiers".
(also give up on the line breaking because it makes it annoying to do
automatically)
Fixes#8245.
This was semi-automated with
```fish
for file in $argv
set -l varname (string replace -r '.*/(.*).html' '$1' -- $file | string escape --style=var)pages
set -l sections (string replace -rf '.*class="headerlink" href="#([^"]*)".*' '$1' <$file)
echo set -l $varname $sections
end
```
(where $argv contains the path to faq, fish_for_bash_users,
interactive, language and tutorial.html)
Building help.fish at compile time would work, but only for users who
build the docs.
As functions know where they are loaded from now, there is no point in
them being marked as loaded from a temporary file that has been removed.
Source the function via a redirect instead.
Ubuntu's fish package on WSL 1 has xsel as recommended dependency,
even though there is no X server available. This change makes us
use Windows' native clipboard even when xsel is installed.
We keep __fish_is_nth_token for compatibility and edit the
implementations of __fish_is_nth_token, __fish_is_first_token and
__fish_is_token_n to use fish_is_nth_token
This injected filenames into fish script, which could inject things
that looked like fish script.
E.g. create a file called `~/.config/fish/themes/"; rm -rf ~/*"`.
Note that the prompts are all shipped by us, but the themes can
technically be added by the user, and they might not be dilligent in
what filenames they allow.
`fish_config theme`:
- `list` to list all available themes (files in the two theme
directories - either the web_config/themes one or
~/.config/fish/themes!)
- `show` to show select (or all) themes right in the terminal - this
starts another fish that reads the theme file and prints the sample
text, manually colored
- `choose` to load a theme *now*, setting the variables globally
- `save` to load a theme and save the variables universally
- `dump` to write the current theme in .theme format (to stdout)
- `demo` to display the current theme
This introduces two functions to
- toggle a process prefix, used for adding "sudo"
- add a job suffix, used for adding "&| less"
Not sure if they are very useful; we'll see.
Closes#7905
I almost always use this on the last/only job in a commandline, so
the semicolon is usually not needed. We have always added it but I
prefer not dropping it: this feels cleaner because it's what you'd
type without the shortcut.
Similarly to b0e3cc4b5 (__fish_complete_suffix: Remove `eval`,
2019-12-28), this use of eval is unsafe and can spew errors if
invoked on an incomplete brace expansion.
Commit d15a51897 ("Rationalize $LESS uses") switched a "less" flag
from -r (interpret all control characters)
to -R (interpret only color codes)
Somehow this changed the output of "fish -c 'command -h'" to include
weird characters:
DESCRIPTION^O
command^O forces the shell to execute the program COMMANDNAME^O and ignore any functions or builtins with the same name.
Probably this was the reason why I originally used -r over -R. Anyway,
-R is safer and it looks like we can just remove the "ul" preprocessing
since "less" will interpret bold/underline just fine.
This has one slight behavioral change: Even with xsel, it now copies
to the clipboard, not the primary. I would imagine anyone who cares
about the primary selection has customized fish_clipboard_copy and
because we never got a bug about this not supporting anything but
xsel (and errorring out if it's not available!) this is probably
unused.
So now we support all the clipboard integration things, and we use the clipboard.
This change adds a binding that sets the s key's behaviour to match
the c key's in visual mode. This mirrors vim's behaviour (see `:h v_s`
in vim or neovim).
Apart from OpenBSD's "colorls" that is basically an ls that can do
color, there's also a ruby tool called "colorls" that's closer to exa.
Ignore that one since the options it understands are quite different
and I'm betting it's slower (given my experience with ruby tools).
See #8042.
* add support for colorized ls on openbsd
* add changelog line for colorls support
* add readme line for colorls support
* determine ls command at runtime, don't cache it
* eliminate __fish_ls_command function
Stop using "--no-init"/"-X" because we have no actual reason to and it
may break mouse initialization on my best friend macOS.
Use --RAW-CONTROL-CHARS, the capital version that only lets through
specific escape sequences, not *everything* - we shouldn't have
anything weird here, but less heavily discourages the other version.
Allow a user's $LESS to override.
Fixes#7997.
This isn't really a "locale" variable as such. It has no effect on
encoding and stuff, it's just the output language.
What we really want here is get something better than the awkward "C"
or "POSIX" for LC_CTYPE specifically - everything else doesn't really
matter.
From my checks (gnome-terminal with the "gnome light" colorscheme)
this seems to be the only color that's barely visible in a light
terminal, and it's the only color mentioned in both bug reports.
I'm leaving the artistic decisions to others, this is now *acceptable*
in both.
Note that, because we use universal variables here (hint #7317), this
will only be changed for preexisting installations when the user
reloads the colorscheme.
Fixes#3412Fixes#3893
It's a bit weird to *have* to fire up a browser to get fish_config to
choose a prompt.
So this adds a `prompt` subcommand to `fish_config`:
- `fish_config prompt list` shows all the available prompt names
- `fish_config prompt show` demos the available sample prompts
- `fish_config prompt choose` sources a prompt
- `fish_config prompt save` makes the choice permanent
A bare `fish_config` or `fish_config browse` opens the web UI.
Part of #3625.
TODO: This shows the right prompt on a new line. Showing it in-line is awkward
to do because we'd have to move it to the right.
Because MacOS' apropos is bad and doesn't support the `--` option
separator, this apparently spews errors.
Because the argument _can't_ start with a `-` (because we add a `^`),
we can just remove it.
Fixes#7965.
This prints a description of the "host". Currently that's
`(chroot:debianchroot) $USER@$hostname`
with the chroot part when needed.
This also switches the default and terlar prompts to use it, the other
prompts have slightly different coloring or logic here.
This called `uname` just to check if we *should* shorten "cygdrive"
directories.
That's more annoying than just doing it by default - on my system `pwd
| string replace` takes about 100 *micro*seconds, and this is done
once per prompt. Anyway, using $PWD further speeds it up to ~30
microseconds (compared to 10-20 for just `pwd`). This is hard to
measure because it's heavily impacted by system hitter.
The alternative is to ask cygwin to ship this feature as a patch.
Fixes#7926.
Also switches the default status order for non-informative to the informative one:
stagedstate invalidstate dirtystate untrackedfiles stashstate
instead of
dirty staged stash untracked
Because macOS' `apropos` is just using grep, and we only need
a prefix match for __fish_describe_command, we can shave off
some ok total execution time here.
No longer uses the __fish_apropos hack on every version of macOS.
Juat Catalina+.
The whatis database generated and replaced daily is 2 megabytes on
my computer, and in ~/.cache on a home dir might wind up on a net
mount or something annoying. or, definitely it's backed up by default.
It's wiser to throw that junk in with other cache files on the system
aka DARWIN_USER_CACHE_DIR, and only use the XDG directory if
someone specifically configured that.
Mainly, this just means at least it won't automatically get backed
up by Time Machine and stuff every day, which is no big deal but
y'know...
Rearranged stuff a little to not shell out every time.
The default vi mode prompt is kind of ugly, mostly because we include
this `[I]` with a super bright green background and white text,
which is particularly grating because most prompts don't actually have
a background.
So we get a ton of people asking "How do I remove this [I]" when they
could really benefit from having the mode shown.
There's a few ways to make this look nicer, the simplest is to just
keep the same colors but use them as foreground instead of background
colors, which looks much more understated.
The mode prompt is important, but not more than the actual contents of
the commandline, so it shouldn't have ALARMING colors.
This allows us to stop descending into untracked directories, which
can be faster.
It's still not *good* - git can still be quite slow here, but if
there's an untracked directory you probably don't care about the
number of files in that.
Fixes#7871.
Given that we no longer have that massive "index" page with
everything, it's become harder to open the correct section
immediately.
So this hardcodes the section titles for each page in help itself.
This was half-automated with
grep -o 'a class="headerlink" href="#[^"]*"' /usr/share/doc/fish/faq.html | sort -u | string replace -r '.*#' '' | string trim -c '"'
The completions still need to be adjusted.
In vim p means paste *after* current character, so go forward a char before pasting.
Also in vim, P means paste *at* current position (like at '|' with cursor = line),
so there's no need to go back a char, just paste it without moving.
Prior to this commit "builtin -h" would silently fail when no
documentation is installed. This happens when running fish without
installing it, or when the docs are not installed.
See #7824
Previously, this message told the user to "set $BROWSER and try again". However,
when I first saw this error, I didn't know how I can set `BROWSER` in fish. Moreover,
I often see this error in situations when no browser will work. For instance, I might be
using fish over ssh, and I might either not know whether that system has a text-mode
browser installed or not want to use it.
A further improvement would be to report this message if a browser fails to start.
This actually *worked* in my tests which confuses me.
It really shouldn't, `apropos -foo` will complain about "-o" not being
a valid option.
It should be `apropos -- -foo`.
Now, of course there are awful apropos implementations, so let's see
if someone complains
When `fish` is running in the Chrome OS Linux VM (Crostini),
both `help` and `fish_config` opened a "file not found"
page. That is because on Crostini, `BROWSER` is usually set to
`garcon-url-handler`, which opens URLs in the host OS Chrome
browser. That browser lacks access to the Linux file system.
This commit fixes these commands. `help` now opens the URL on
www.fishshell.com. `fish_config` now opens the URL for the
server it starts. Previously, it opened a local file that
redirects to the same URL.
In the case of `help`, the situation could be improved further
by starting a web server to serve help. I don't know of another
way to access `/share/fish` from outside the VM without user
intervention, and I think that might be a part of the security
model for the Crostini VM.
It's hard to write a test for this. I checked that `help math`,
`python2 webconfig.py`, and `python3 webconfig.py` work on my
machine running in Crostini.
This was a handler for various prompt variables that called a repaint.
Unfortunately, if you set one of those *inside* the prompt (a logical
place for it), this would lead to something like #7775.
So, because this isn't actually *useful* as far as I can see (how do
you set these variables in a way that you're not already inside a
prompt or about to draw a prompt? in a key binding?), we remove it,
like we removed the repaint from git's variable handlers.
This `set -e` had a cartesian product that caused it to remove the
indexes separately, so the later indexes were off - removing the first
and then the second ends up removing the first and then the
old-*third* which is now the second.
Just quote the expansion so it runs in one go.
Fixes#7776
Because we removed repaint coalescing, currently setting any of the
git prompt variables in fish_prompt leads to a repaint loop (that
presumably aborts once it reaches the recursion limit).
Since repainting on these variables isn't really useful (when you
`set` them interactively you already get a new prompt), just remove
it.
There's two cases this "breaks":
- When you set a variable *after* the call to fish_git_prompt
- When you set a variable via a binding
In both of these it's not too much to expect an explicit "commandline
-f repaint", especially since for bindings that's already needed in
most cases, and setting a variable after using it isn't normal.
Fixes#7775.
Called as
__fish_print_pipestatus "[foo" "oof]" "|" (set_color green) (set_color --bold blue) 0 1 2
it would make the closing `oof]` bold green.
Fixes#7771.
In this context, as it stands, $last_pid will give fish's pid (because
of pgroup shenanigans).
Since that doesn't really work, just `disown` without and let fish
figure out what the last process was.
Theoretically this has an issue if someone started a background
process *before* the python script *and* that exits before we run
disown.
That's a vanishingly small window and this is only run on first start,
so it seems acceptable.
Fixes#7739.
When pasting a multiline command with indented blocks, extra indentation
from spaces, or tabs, is generally undesirable, because fish already indents
pipes and blocks. Discard the indentation unless the cursor or the pasted
part is inside quotes.
Users who copied fish_clipboard_paste need to update it because
__fish_commandline_is_singlequoted had an API change and was renamed.
__fish_print_commands just prints the commands we have man pages for,
and help uses that to figure out whether it should link
a command or a section. If the docs aren't installed it won't find
anything.
At least check the builtins, because we document them and it's easy.
This probably needs to be added at build time - glob
doc_src/cmds/*.rst.
This was only a thing in cygwin, and only a workaround because
cygwin's hostname was broken in 2013 and our sample prompts called it,
which caused errors in fish_config.
Our sample prompts no longer call `hostname` at all (they use
`prompt_hostname`, which uses the variable), and it's possible
cygwin's hostname was fixed in the meantime.
Fixes#7669.
Over in https://github.com/wez/wezterm/issues/115#issuecomment-765869705 one of my users noted that fish had automatic OSC 7, but that it wasn't enabled under WezTerm.
You can detect WezTerm through the `$TERM_PROGRAM` environment. In practical terms, all versions of wezterm in the wild support OSC 7 so a version check is not needed.
I'm not a fish user myself, but I did give the equivalent change to this a try on my Fedora 33 machine (it has an older version of fish).
I can see in this file that there's some stuff with `__fish_enable_focus` that you may also want to enable under wezterm; the escape sequence is supported as are panes, tabs and windows.
As mentioned in 5b706faa73, bare
`disown` has a problem: It disowns the last *existing* job.
Unfortunately, it's easy to see cases where that won't happen:
sleep 5m &
/bin/true & # will exit immediately
disown # will most likely disown *sleep*, not true
So what we do is to pass $last_pid.
In help especially this is likely to occur because many graphical
browsers fork immediately to avoid blocking the terminal (we only
added the backgrounding and disown because some weren't).
Note that it's *possible* this doesn't occur if used in the same
function, but I don't want to rely on those semantics.
It might be worth doing this as the default - see #7210.
This allows for multiple edits to be undone/redone in one go, as if they
were one edit.
Useful when a function is editing the commandline buffer via scripted
changes or via a keybinding so the internal changes to the buffer can be
abstracted away.
(Having extreme difficulty getting pexpect to play nice with the concept
of undo/redo...)
