Backport #32050 by @KN4CK3R
Fixes#31937
- Add missing comment reply handling
- Use `onGiteaRun` in the test because the fixtures are not present
otherwise (did this behaviour change?)
Compare without whitespaces.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport #31841 by @kemzeb
A 500 status code was thrown when passing a non-existent target to the
create release API. This snapshot handles this error and instead throws
a 404 status code.
Discovered while working on #31840.
Co-authored-by: Kemal Zebari <60799661+kemzeb@users.noreply.github.com>
This PR should be replaced by #31860 in v1.23. The aim of creating this
PR is to fix it in 1.22 because globallock hasn't been introduced.
Fix#27640Fix#29563Fix#31215
Backport #32017 by @charles-plutohealth
---
`status == "rename"` should have read `status == "renamed"`. The typo
means that file.PreviousFilename would never be populated, which e.g.
breaks usage of the Github Action at
https://github.com/dorny/paths-filter.
Co-authored-by: charles-plutohealth <143208583+charles-plutohealth@users.noreply.github.com>
Backport #32025 by @wolfogre
Fix#32024. Follow #27655.
After this PR, all usage of "new dial context" needs to provide a proxy,
so I dropped the old `NewDialContext` and renamed
`NewDialContextWithProxy` to `NewDialContext`.
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #32011 by @wolfogre
Replace #32001.
To prevent the context cache from being misused for long-term work
(which would result in using invalid cache without awareness), the
context cache is designed to exist for a maximum of 10 seconds. This
leads to many false reports, especially in the case of slow SQL.
This PR increases it to 5 minutes to reduce false reports.
5 minutes is not a very safe value, as a lot of changes may have
occurred within that time frame. However, as far as I know, there has
not been a case of misuse of context cache discovered so far, so I think
5 minutes should be OK.
Please note that after this PR, if warning logs are found again, it
should get attention, at that time it can be almost 100% certain that it
is a misuse.
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #31931 by @lunny
All refs under `refs/pull` should only be changed from Gitea inside but
not by pushing from outside of Gitea.
This PR will prevent the pull refs update but allow other refs to be
updated on the same pushing with `--mirror` operations.
The main changes are to add checks on `update` hook but not
`pre-receive` because `update` will be invoked by every ref but
`pre-receive` will revert all changes once one ref update fails.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #31754 by @lunny
When opening a repository, it will call `ensureValidRepository` and also
`CatFileBatch`. But sometimes these will not be used until repository
closed. So it's a waste of CPU to invoke 3 times git command for every
open repository.
This PR removed all of these from `OpenRepository` but only kept
checking whether the folder exists. When a batch is necessary, the
necessary functions will be invoked.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #31874 by @bohde
In the OpenID flows, the "CfTurnstileSitekey" wasn't populated, which
caused those flows to fail if using Turnstile as the Captcha
implementation.
This adds the missing context variables, allowing Turnstile to be used
in the OpenID flows.
Co-authored-by: Rowan Bohde <rowan.bohde@gmail.com>
Backport #31842 by @Adrian-Hirt
When a long line with characters such as dots is returned by a step in
an action (e.g. by the output of the Ruby on Rails test runner), it
overflows the log container, causing the page to scroll sideways (see
first screenshot):
This PR adds the CSS `overflow-wrap: anywhere;` to the
`.job-step-section .job-step-logs .job-log-line .log-msg` selector,
which causes such lines to wrap as well (see second screenshot in which
the line wraps nicely):
Co-authored-by: Adrian Hirt <13788379+Adrian-Hirt@users.noreply.github.com>
Backport #31825 by @Zettat123
Fix#31395
This regression is introduced by #30273. To find out how GitHub handles
this case, I did [some
tests](https://github.com/go-gitea/gitea/issues/31395#issuecomment-2278929115).
I use redirect in this PR instead of checking if the corresponding `.md`
file exists when rendering the link because GitHub also uses redirect.
With this PR, there is no need to resolve the raw wiki link when
rendering a wiki page. If a wiki link points to a raw file, access will
be redirected to the raw link.
---------
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: yp05327 <576951401@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #31843 by @wolfogre
Fix#31625.
If `pull_service.NewPullRequest` return an error which misses each `if`
check, `CompareAndPullRequestPost` will return immediately, since it
doesn't write the HTTP response, a 200 response with empty body will be
sent to clients.
```go
if err := pull_service.NewPullRequest(ctx, repo, pullIssue, labelIDs, attachments, pullRequest, assigneeIDs); err != nil {
if repo_model.IsErrUserDoesNotHaveAccessToRepo(err) {
ctx.Error(http.StatusBadRequest, "UserDoesNotHaveAccessToRepo", err.Error())
} else if git.IsErrPushRejected(err) {
// ...
ctx.JSONError(flashError)
} else if errors.Is(err, user_model.ErrBlockedUser) {
// ...
ctx.JSONError(flashError)
} else if errors.Is(err, issues_model.ErrMustCollaborator) {
// ...
ctx.JSONError(flashError)
}
return
}
```
Not sure what kind of error can cause it to happen, so this PR just
expose it. And we can fix it when users report that creating PRs failed
with error responses.
It's all my guess since I cannot reproduce the problem, but even if it's
not related, the code here needs to be improved.
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #31832 by @yp05327
Fix#31807
ps: the newly added params's value will be changed.
When the first time you selected the filter, the values of params will
be `0` or `1`
But in pager it will be `true` or `false`.
So do we have `boolToInt` function?
Co-authored-by: yp05327 <576951401@qq.com>
Backport #31829 by @lunny
Fix#31730
This PR rewrote the function `PublicKeysAreExternallyManaged` with a
simple test. The new function removed the loop to make it more readable.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #31770 by @emrebdr
When transferring repositories that have issues linked to a project
board to another organization, the issues remain associated with the
original project board. This causes the columns in the project board to
become bugged, making it difficult to move other issues in or out of the
affected columns. As a solution, I removed the issue relations since the
other organization does not have this project table.
Fix for #31538
Co-authored-by: Edip Emre Bodur <emrebdr29@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #31683 by @SimonPistache
As discussed in #31667 & #26561, when a card on a Project contains
images, they can overflow the card on its containing column. This aims
to fix this issue via snapping scrollbars.
---
Issue #31667 is open to discussion as there should be room for
improvement.
Co-authored-by: Simon Priet <105607989+SimonPistache@users.noreply.github.com>
- Change condition to include `RepoID` equal to 0 for organization
secrets
Backport https://github.com/go-gitea/gitea/pull/31715 by @appleboy
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Backport #31790 by @wolfogre
Fix#31271.
When gogit is enabled, `IsObjectExist` calls
`repo.gogitRepo.ResolveRevision`, which is not correct. It's for
checking references not objects, it could work with commit hash since
it's both a valid reference and a commit object, but it doesn't work
with blob objects.
So it causes #31271 because it reports that all blob objects do not
exist.
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #31778 by @lunny
Fix#31738
When pushing a new branch, the old commit is zero. Most git commands
cannot recognize the zero commit id. To get the changed files in the
push, we need to get the first diverge commit of this branch. In most
situations, we could check commits one by one until one commit is
contained by another branch. Then we will think that commit is the
diverge point.
And in a pre-receive hook, this will be more difficult because all
commits haven't been merged and they actually stored in a temporary
place by git. So we need to bring some envs to let git know the commit
exist.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
