93218a343a
A hack to work around non-POSIX NFS <-> FUSE behavior where it turns an open(O_EXCL|O_CREAT,0444) into multiple calls that results in EACCES.
95 KiB
% mergerfs(1) mergerfs user manual
% Antonio SJ Musumeci trapexit@spawn.link
% 2020-07-22
NAME
mergerfs - a featureful union filesystem
SYNOPSIS
mergerfs -o<options> <branches> <mountpoint>
DESCRIPTION
mergerfs is a union filesystem geared towards simplifying storage and management of files across numerous commodity storage devices. It is similar to mhddfs, unionfs, and aufs.
FEATURES
- Runs in userspace (FUSE)
- Configurable behaviors / file placement
- Support for extended attributes (xattrs)
- Support for file attributes (chattr)
- Runtime configurable (via xattrs)
- Safe to run as root
- Opportunistic credential caching
- Works with heterogeneous filesystem types
- Handling of writes to full drives (transparently move file to drive with capacity)
- Handles pool of read-only and read/write drives
- Can turn read-only files into symlinks to underlying file
- Hard link copy-on-write / CoW
- supports POSIX ACLs
HOW IT WORKS
mergerfs logically merges multiple paths together. Think a union of sets. The file/s or directory/s acted on or presented through mergerfs are based on the policy chosen for that particular action. Read more about policies below.
A + B = C
/disk1 /disk2 /merged
| | |
+-- /dir1 +-- /dir1 +-- /dir1
| | | | | |
| +-- file1 | +-- file2 | +-- file1
| | +-- file3 | +-- file2
+-- /dir2 | | +-- file3
| | +-- /dir3 |
| +-- file4 | +-- /dir2
| +-- file5 | |
+-- file6 | +-- file4
|
+-- /dir3
| |
| +-- file5
|
+-- file6
mergerfs does not support the copy-on-write (CoW) behavior found in aufs and overlayfs. You can not mount a read-only filesystem and write to it. However, mergerfs will ignore read-only drives when creating new files so you can mix read-write and read-only drives. It also does not split data across drives. It is not RAID0 / striping. It is simply a union.
TERMINOLOGY
- branch: A base path used in the pool.
- pool: The mergerfs mount. The union of the branches.
- relative path: The path in the pool relative to the branch and mount.
- policy: The algorithm used to select a file when performing a function.
- function: A filesystem call (open, unlink, create, getattr, etc.)
- category: A collection of functions (action, create, search).
- path preservation: Aspect of some policies which includes checking the path for which a file would be created.
BASIC SETUP
If you don't already know that you have a special use case then just start with one of the following option sets.
You don't need mmap
use_ino,cache.files=off,dropcacheonclose=true,allow_other,category.create=mfs
You do need mmap (used by rtorrent and some other programs)
use_ino,cache.files=partial,dropcacheonclose=true,allow_other,category.create=mfs
See the mergerfs wiki for real world deployments for comparisons / ideas.
OPTIONS
mount options
- config: Path to a config file. Same arguments as below in key=val format.
- branches: Colon delimited list of branches.
- allow_other: A libfuse option which allows users besides the one which ran mergerfs to see the filesystem. This is required for most use-cases.
- minfreespace=SIZE: The minimum space value used for creation policies. Understands 'K', 'M', and 'G' to represent kilobyte, megabyte, and gigabyte respectively. (default: 4G)
- moveonenospc=BOOL|POLICY: When enabled if a write fails with ENOSPC (no space left on device) or EDQUOT (disk quota exceeded) the policy selected will run to find a new location for the file. An attempt to move the file to that branch will occur (keeping all metadata possible) and if successful the original is unlinked and the write retried. (default: false, true = mfs)
- use_ino: Causes mergerfs to supply file/directory inodes rather than libfuse. While not a default it is recommended it be enabled so that linked files share the same inode value.
- inodecalc=passthrough|path-hash|devino-hash|hybrid-hash: Selects the inode calculation algorithm. (default: hybrid-hash)
- dropcacheonclose=BOOL: When a file is requested to be closed call
posix_fadviseon it first to instruct the kernel that we no longer need the data and it can drop its cache. Recommended when cache.files=partial|full|auto-full to limit double caching. (default: false) - symlinkify=BOOL: When enabled and a file is not writable and its mtime or ctime is older than symlinkify_timeout files will be reported as symlinks to the original files. Please read more below before using. (default: false)
- symlinkify_timeout=INT: Time to wait, in seconds, to activate the symlinkify behavior. (default: 3600)
- nullrw=BOOL: Turns reads and writes into no-ops. The request will succeed but do nothing. Useful for benchmarking mergerfs. (default: false)
- ignorepponrename=BOOL: Ignore path preserving on rename. Typically rename and link act differently depending on the policy of
create(read below). Enabling this will cause rename and link to always use the non-path preserving behavior. This means files, when renamed or linked, will stay on the same drive. (default: false) - security_capability=BOOL: If false return ENOATTR when xattr security.capability is queried. (default: true)
- xattr=passthrough|noattr|nosys: Runtime control of xattrs. Default is to passthrough xattr requests. 'noattr' will short circuit as if nothing exists. 'nosys' will respond with ENOSYS as if xattrs are not supported or disabled. (default: passthrough)
- link_cow=BOOL: When enabled if a regular file is opened which has a link count > 1 it will copy the file to a temporary file and rename over the original. Breaking the link and providing a basic copy-on-write function similar to cow-shell. (default: false)
- statfs=base|full: Controls how statfs works. 'base' means it will always use all branches in statfs calculations. 'full' is in effect path preserving and only includes drives where the path exists. (default: base)
- statfs_ignore=none|ro|nc: 'ro' will cause statfs calculations to ignore available space for branches mounted or tagged as 'read-only' or 'no create'. 'nc' will ignore available space for branches tagged as 'no create'. (default: none)
- nfsopenhack=off|git|all: A workaround for exporting mergerfs over NFS where there are issues with creating files for write while setting the mode to read-only. (default: off)
- posix_acl=BOOL: Enable POSIX ACL support (if supported by kernel and underlying filesystem). (default: false)
- async_read=BOOL: Perform reads asynchronously. If disabled or unavailable the kernel will ensure there is at most one pending read request per file handle and will attempt to order requests by offset. (default: true)
- fuse_msg_size=INT: Set the max number of pages per FUSE message. Only available on Linux >= 4.20 and ignored otherwise. (min: 1; max: 256; default: 256)
- threads=INT: Number of threads to use in multithreaded mode. When set to zero it will attempt to discover and use the number of logical cores. If the lookup fails it will fall back to using 4. If the thread count is set negative it will look up the number of cores then divide by the absolute value. ie. threads=-2 on an 8 core machine will result in 8 / 2 = 4 threads. There will always be at least 1 thread. NOTE: higher number of threads increases parallelism but usually decreases throughput. (default: 0)
- fsname=STR: Sets the name of the filesystem as seen in mount, df, etc. Defaults to a list of the source paths concatenated together with the longest common prefix removed.
- func.FUNC=POLICY: Sets the specific FUSE function's policy. See below for the list of value types. Example: func.getattr=newest
- category.CATEGORY=POLICY: Sets policy of all FUSE functions in the provided category. See POLICIES section for defaults. Example: category.create=mfs
- cache.open=INT: 'open' policy cache timeout in seconds. (default: 0)
- cache.statfs=INT: 'statfs' cache timeout in seconds. (default: 0)
- cache.attr=INT: File attribute cache timeout in seconds. (default: 1)
- cache.entry=INT: File name lookup cache timeout in seconds. (default: 1)
- cache.negative_entry=INT: Negative file name lookup cache timeout in seconds. (default: 0)
- cache.files=libfuse|off|partial|full|auto-full: File page caching mode (default: libfuse)
- cache.writeback=BOOL: Enable kernel writeback caching (default: false)
- cache.symlinks=BOOL: Cache symlinks (if supported by kernel) (default: false)
- cache.readdir=BOOL: Cache readdir (if supported by kernel) (default: false)
- direct_io: deprecated - Bypass page cache. Use
cache.files=offinstead. (default: false) - kernel_cache: deprecated - Do not invalidate data cache on file open. Use
cache.files=fullinstead. (default: false) - auto_cache: deprecated - Invalidate data cache if file mtime or size change. Use
cache.files=auto-fullinstead. (default: false) - async_read: deprecated - Perform reads asynchronously. Use
async_read=trueinstead. - sync_read: deprecated - Perform reads synchronously. Use
async_read=falseinstead.
NOTE: Options are evaluated in the order listed so if the options are func.rmdir=rand,category.action=ff the action category setting will override the rmdir setting.
Value Types
- BOOL = 'true' | 'false'
- INT = [0,MAX_INT]
- SIZE = 'NNM'; NN = INT, M = 'K' | 'M' | 'G' | 'T'
- STR = string
- FUNC = FUSE function
- CATEGORY = FUSE function category
- POLICY = mergerfs function policy
branches
The 'branches' (formerly 'srcmounts') argument is a colon (':') delimited list of paths to be pooled together. It does not matter if the paths are on the same or different drives nor does it matter the filesystem. Used and available space will not be duplicated for paths on the same device and any features which aren't supported by the underlying filesystem (such as file attributes or extended attributes) will return the appropriate errors.
To make it easier to include multiple branches mergerfs supports globbing. The globbing tokens MUST be escaped when using via the shell else the shell itself will apply the glob itself.
Each branch can have a suffix of =RW (read / write), =RO (read-only), or =NC (no create). These suffixes work with globs as well and will apply to each path found. RW is the default behavior and those paths will be eligible for all policy categories. RO will exclude those paths from create and action policies (just as a filesystem being mounted ro would). NC will exclude those paths from create policies (you can't create but you can change / delete).
# mergerfs -o allow_other,use_ino /mnt/disk\*:/mnt/cdrom /media/drives
The above line will use all mount points in /mnt prefixed with disk and the cdrom.
To have the pool mounted at boot or otherwise accessible from related tools use /etc/fstab.
# <file system> <mount point> <type> <options> <dump> <pass>
/mnt/disk*:/mnt/cdrom /media/drives mergerfs allow_other,use_ino 0 0
NOTE: the globbing is done at mount or xattr update time (see below). If a new directory is added matching the glob after the fact it will not be automatically included.
NOTE: for mounting via fstab to work you must have mount.fuse installed. For Ubuntu/Debian it is included in the fuse package.
inodecalc
Inodes (st_ino) are unique identifiers within a filesystem. Each mounted filesystem has device ID (st_dev) as well and together they can uniquely identify a file on the whole of the system. Entries on the same device with the same inode are in fact references to the same underlying file. It is a many to one relationship between names and an inode. Directories, however, do not have multiple links on most systems due to the complexity they add.
FUSE allows the server (mergerfs) to set inode values but not device IDs. Creating an inode value is somewhat complex in mergerfs' case as files aren't really in its control. If a policy changes what directory or file is to be selected or something changes out of band it becomes unclear what value should be used. Most software does not to care what the values are but those that do often break if a value changes unexpectedly. The tool find will abort a directory walk if it sees a directory inode change. NFS will return stale handle errors if the inode changes out of band. File dedup tools will usually leverage device ids and inodes as a shortcut in searching for duplicate files and would resort to full file comparisons should it find different inode values.
mergerfs offers multiple ways to calculate the inode in hopes of covering different usecases.
- passthrough: Passes through the underlying inode value. Mostly intended for testing as using this does not address any of the problems mentioned above and could confuse file deduplication software as inodes from different filesystems can be the same.
- path-hash: Hashes the relative path of the entry in question. The underlying file's values are completely ignored. This means the inode value will always be the same for that file path. This is useful when using NFS and you make changes out of band such as copy data between branches. This also means that entries that do point to the same file will not be recognizable via inodes. That does not mean hard links don't work. They will.
- devino-hash: Hashes the device id and inode of the underlying entry. This won't prevent issues with NFS should the policy pick a different file or files move out of band but will present the same inode for underlying files that do too.
- hybrid-hash: Performs
path-hashon directories anddevino-hashon other file types. Since directories can't have hard links the static value won't make a difference and the files will get values useful for finding duplicates. Probably the best to use if not using NFS. As such it is the default.
While there is a risk of hash collision in tests of a couple million entries there were zero collisions. Unlike a typical filesystem FUSE filesystems can reuse inodes and not refer to the same entry. The internal identifier used to reference a file in FUSE is different from the inode value presented. The former is the nodeid and is actually a tuple of 2 64bit values: nodeid and generation. This tuple is not client facing. The inode that is presented to the client is passed through the kernel uninterpreted.
From FUSE docs regarding use_ino:
Honor the st_ino field in the functions getattr() and
fill_dir(). This value is used to fill in the st_ino field
in the stat(2), lstat(2), fstat(2) functions and the d_ino
field in the readdir(2) function. The filesystem does not
have to guarantee uniqueness, however some applications
rely on this value being unique for the whole filesystem.
Note that this does *not* affect the inode that libfuse
and the kernel use internally (also called the "nodeid").
In the future the use_ino option will probably be removed as this feature should replace the original libfuse inode calculation strategy. Currently you still need to use use_ino in order to enable inodecalc.
fuse_msg_size
FUSE applications communicate with the kernel over a special character device: /dev/fuse. A large portion of the overhead associated with FUSE is the cost of going back and forth from user space and kernel space over that device. Generally speaking the fewer trips needed the better the performance will be. Reducing the number of trips can be done a number of ways. Kernel level caching and increasing message sizes being two significant ones. When it comes to reads and writes if the message size is doubled the number of trips are approximately halved.
In Linux 4.20 a new feature was added allowing the negotiation of the max message size. Since the size is in multiples of pages the feature is called max_pages. There is a maximum max_pages value of 256 (1MiB) and minimum of 1 (4KiB). The default used by Linux >=4.20, and hardcoded value used before 4.20, is 32 (128KiB). In mergerfs its referred to as fuse_msg_size to make it clear what it impacts and provide some abstraction.
Since there should be no downsides to increasing fuse_msg_size / max_pages, outside a minor bump in RAM usage due to larger message buffers, mergerfs defaults the value to 256. On kernels before 4.20 the value has no effect. The reason the value is configurable is to enable experimentation and benchmarking. See the BENCHMARKING section for examples.
symlinkify
Due to the levels of indirection introduced by mergerfs and the underlying technology FUSE there can be varying levels of performance degradation. This feature will turn non-directories which are not writable into symlinks to the original file found by the readlink policy after the mtime and ctime are older than the timeout.
WARNING: The current implementation has a known issue in which if the file is open and being used when the file is converted to a symlink then the application which has that file open will receive an error when using it. This is unlikely to occur in practice but is something to keep in mind.
WARNING: Some backup solutions, such as CrashPlan, do not backup the target of a symlink. If using this feature it will be necessary to point any backup software to the original drives or configure the software to follow symlinks if such an option is available. Alternatively create two mounts. One for backup and one for general consumption.
nullrw
Due to how FUSE works there is an overhead to all requests made to a FUSE filesystem that wouldn't exist for an in kernel one. Meaning that even a simple passthrough will have some slowdown. However, generally the overhead is minimal in comparison to the cost of the underlying I/O. By disabling the underlying I/O we can test the theoretical performance boundaries.
By enabling nullrw mergerfs will work as it always does except that all reads and writes will be no-ops. A write will succeed (the size of the write will be returned as if it were successful) but mergerfs does nothing with the data it was given. Similarly a read will return the size requested but won't touch the buffer.
See the BENCHMARKING section for suggestions on how to test.
xattr
Runtime extended attribute support can be managed via the xattr option. By default it will passthrough any xattr calls. Given xattr support is rarely used and can have significant performance implications mergerfs allows it to be disabled at runtime. The performance problems mostly comes when file caching is enabled. The kernel will send a getxattr for security.capability before every single write. It doesn't cache the responses to any getxattr. This might be addressed in the future but for now mergerfs can really only offer the following workarounds.
noattr will cause mergerfs to short circuit all xattr calls and return ENOATTR where appropriate. mergerfs still gets all the requests but they will not be forwarded on to the underlying filesystems. The runtime control will still function in this mode.
nosys will cause mergerfs to return ENOSYS for any xattr call. The difference with noattr is that the kernel will cache this fact and itself short circuit future calls. This is more efficient than noattr but will cause mergerfs' runtime control via the hidden file to stop working.
nfsopenhack
NFS is not fully POSIX compliant and historically certain behaviors, such as opening files with O_EXCL, are not or not well supported. When mergerfs (or any FUSE filesystem) is exported over NFS some of these issues come up due to how NFS and FUSE interact.
This hack addresses the issue where the creation of a file with a read-only mode but with a read/write or write only flag. Normally this is perfectly valid but NFS chops the one open call into multiple calls. Exactly how it is translated depends on the configuration and versions of the NFS server and clients but it results in a permission error because a normal user is not allowed to open a read-only file as writable.
Even though it's a more niche stituation this hack breaks normal security and behavior and as such is off by default. If set to git it will only perform the hack when the path in question includes /.git/. all will result it it applying anytime a readonly file which is empty is opened for writing.
FUNCTIONS / POLICIES / CATEGORIES
The POSIX filesystem API is made up of a number of functions. creat, stat, chown, etc. For ease of configuration in mergerfs most of the core functions are grouped into 3 categories: action, create, and search. These functions and categories can be assigned a policy which dictates which underlying branch/file/directory is chosen when performing that behavior. Any policy can be assigned to a function or category though some may not be very useful in practice. For instance: rand (random) may be useful for file creation (create) but could lead to very odd behavior if used for chmod if there were more than one copy of the file.
Some functions, listed in the category N/A below, can not be assigned the normal policies. All functions which work on file handles use the handle which was acquired by open or create. readdir has no real need for a policy given the purpose is merely to return a list of entries in a directory. statfs's behavior can be modified via other options. That said many times the current FUSE kernel driver will not always provide the file handle when a client calls fgetattr, fchown, fchmod, futimens, ftruncate, etc. This means it will call the regular, path based, versions.
When using policies which are based on a branch's available space the base path provided is used. Not the full path to the file in question. Meaning that sub mounts won't be considered in the space calculations. The reason is that it doesn't really work for non-path preserving policies and can lead to non-obvious behaviors.
Functions and their Category classifications
| Category | FUSE Functions |
|---|---|
| action | chmod, chown, link, removexattr, rename, rmdir, setxattr, truncate, unlink, utimens |
| create | create, mkdir, mknod, symlink |
| search | access, getattr, getxattr, ioctl (directories), listxattr, open, readlink |
| N/A | fchmod, fchown, futimens, ftruncate, fallocate, fgetattr, fsync, ioctl (files), read, readdir, release, statfs, write, copy_file_range |
In cases where something may be searched (to confirm a directory exists across all source mounts) getattr will be used.
Path Preservation
Policies, as described below, are of two basic types. path preserving and non-path preserving.
All policies which start with ep (epff, eplfs, eplus, epmfs, eprand) are path preserving. ep stands for existing path.
A path preserving policy will only consider drives where the relative path being accessed already exists.
When using non-path preserving policies paths will be cloned to target drives as necessary.
With the msp or most shared path policies they are defined as path preserving for the purpose of controlling link and rename's behaviors since ignorepponrename is available to disable that behavior. In mergerfs v3.0 the path preserving behavior of rename and link will likely be separated from the policy all together.
Filters
Policies basically search branches and create a list of files / paths for functions to work on. The policy is responsible for filtering and sorting. Filters include minfreespace, whether or not a branch is mounted read-only, and the branch tagging (RO,NC,RW). The policy defines the sorting but filtering is mostly uniform as described below.
- No search policies filter.
- All action policies will filter out branches which are mounted read-only or tagged as RO (read-only).
- All create policies will filter out branches which are mounted read-only, tagged RO (read-only) or NC (no create), or has available space less than
minfreespace.
If all branches are filtered an error will be returned. Typically EROFS (read-only filesystem) or ENOSPC (no space left on device) depending on the most recent reason for filtering a branch.
Policy descriptions
Because of the nature of the behavior the policies act diffierently depending on the function it is used with (based on the category).
| Policy | Description |
|---|---|
| all | Search: same as epall. Action: same as epall. Create: for mkdir, mknod, and symlink it will apply to all branches. create works like ff. |
| epall (existing path, all) | Search: same as epff (but more expensive because it doesn't stop after finding a valid branch). Action: apply to all found. Create: for mkdir, mknod, and symlink it will apply to all found. create works like epff (but more expensive because it doesn't stop after finding a valid branch). |
| epff (existing path, first found) | Given the order of the branches, as defined at mount time or configured at runtime, act on the first one found where the relative path exists. |
| eplfs (existing path, least free space) | Of all the branches on which the relative path exists choose the drive with the least free space. |
| eplus (existing path, least used space) | Of all the branches on which the relative path exists choose the drive with the least used space. |
| epmfs (existing path, most free space) | Of all the branches on which the relative path exists choose the drive with the most free space. |
| eprand (existing path, random) | Calls epall and then randomizes. Returns 1. |
| erofs | Exclusively return -1 with errno set to EROFS (read-only filesystem). |
| ff (first found) | Search: same as epff. Action: same as epff. Create: Given the order of the drives, as defined at mount time or configured at runtime, act on the first one found. |
| lfs (least free space) | Search: same as eplfs. Action: same as eplfs. Create: Pick the drive with the least available free space. |
| lus (least used space) | Search: same as eplus. Action: same as eplus. Create: Pick the drive with the least used space. |
| mfs (most free space) | Search: same as epmfs. Action: same as epmfs. Create: Pick the drive with the most available free space. |
| msplfs (most shared path, least free space) | Search: same as eplfs. Action: same as eplfs. Create: like eplfs but walk back the path if it fails to find a branch at that level. |
| msplus (most shared path, least used space) | Search: same as eplus. Action: same as eplus. Create: like eplus but walk back the path if it fails to find a branch at that level. |
| mspmfs (most shared path, most free space) | Search: same as epmfss. Action: same as epmfs. Create: like eplmfs but walk back the path if it fails to find a branch at that level. |
| newest | Pick the file / directory with the largest mtime. |
| rand (random) | Calls all and then randomizes. Returns 1. |
NOTE: If you are using an underlying filesystem that reserves blocks such as ext2, ext3, or ext4 be aware that mergerfs respects the reservation by using f_bavail (number of free blocks for unprivileged users) rather than f_bfree (number of free blocks) in policy calculations. df does NOT use f_bavail, it uses f_bfree, so direct comparisons between df output and mergerfs' policies is not appropriate.
Defaults
| Category | Policy |
|---|---|
| action | epall |
| create | epmfs |
| search | ff |
ioctl
When ioctl is used with an open file then it will use the file handle which was created at the original open call. However, when using ioctl with a directory mergerfs will use the open policy to find the directory to act on.
unlink
In FUSE there is an opaque "file handle" which is created by open, create, or opendir, passed to the kernel, and then is passed back to the FUSE userland application by the kernel. Unfortunately, the FUSE kernel driver does not always send the file handle when it theoretically could/should. This complicates certain behaviors / workflows particularly in the high level API. As a result mergerfs is currently doing a few hacky things.
libfuse2 and libfuse3, when using the high level API, will rename names to .fuse_hiddenXXXXXX if the file is open when unlinked or renamed over. It does this so the file is still available when a request referencing the now missing file is made. This file however keeps a rmdir from succeeding and can be picked up by software reading directories.
The change mergerfs has done is that if a file is open when an unlink or rename happens it will open the file and keep it open till closed by all those who opened it prior. When a request comes in referencing that file and it doesn't include a file handle it will instead use the file handle created at unlink/rename time.
This won't result in technically proper behavior but close enough for many usecases.
The plan is to rewrite mergerfs to use the low level API so these invasive libfuse changes are no longer necessary.
rename & link
NOTE: If you're receiving errors from software when files are moved / renamed / linked then you should consider changing the create policy to one which is not path preserving, enabling ignorepponrename, or contacting the author of the offending software and requesting that EXDEV (cross device / improper link) be properly handled.
rename and link are tricky functions in a union filesystem. rename only works within a single filesystem or device. If a rename can't be done atomically due to the source and destination paths existing on different mount points it will return -1 with errno = EXDEV (cross device / improper link). So if a rename's source and target are on different drives within the pool it creates an issue.
Originally mergerfs would return EXDEV whenever a rename was requested which was cross directory in any way. This made the code simple and was technically compliant with POSIX requirements. However, many applications fail to handle EXDEV at all and treat it as a normal error or otherwise handle it poorly. Such apps include: gvfsd-fuse v1.20.3 and prior, Finder / CIFS/SMB client in Apple OSX 10.9+, NZBGet, Samba's recycling bin feature.
As a result a compromise was made in order to get most software to work while still obeying mergerfs' policies. Below is the basic logic.
- If using a create policy which tries to preserve directory paths (epff,eplfs,eplus,epmfs)
- Using the rename policy get the list of files to rename
- For each file attempt rename:
- If failure with ENOENT (no such file or directory) run create policy
- If create policy returns the same drive as currently evaluating then clone the path
- Re-attempt rename
- If any of the renames succeed the higher level rename is considered a success
- If no renames succeed the first error encountered will be returned
- On success:
- Remove the target from all drives with no source file
- Remove the source from all drives which failed to rename
- If using a create policy which does not try to preserve directory paths
- Using the rename policy get the list of files to rename
- Using the getattr policy get the target path
- For each file attempt rename:
- If the source drive != target drive:
- Clone target path from target drive to source drive
- Rename
- If the source drive != target drive:
- If any of the renames succeed the higher level rename is considered a success
- If no renames succeed the first error encountered will be returned
- On success:
- Remove the target from all drives with no source file
- Remove the source from all drives which failed to rename
The the removals are subject to normal entitlement checks.
The above behavior will help minimize the likelihood of EXDEV being returned but it will still be possible.
link uses the same strategy but without the removals.
readdir
readdir is different from all other filesystem functions. While it could have its own set of policies to tweak its behavior at this time it provides a simple union of files and directories found. Remember that any action or information queried about these files and directories come from the respective function. For instance: an ls is a readdir and for each file/directory returned getattr is called. Meaning the policy of getattr is responsible for choosing the file/directory which is the source of the metadata you see in an ls.
statfs / statvfs
statvfs normalizes the source drives based on the fragment size and sums the number of adjusted blocks and inodes. This means you will see the combined space of all sources. Total, used, and free. The sources however are dedupped based on the drive so multiple sources on the same drive will not result in double counting its space. Filesystems mounted further down the tree of the branch will not be included when checking the mount's stats.
The options statfs and statfs_ignore can be used to modify statfs behavior.
BUILD / UPDATE
NOTE: Prebuilt packages can be found at: https://github.com/trapexit/mergerfs/releases
First get the code from github.
$ git clone https://github.com/trapexit/mergerfs.git
$ # or
$ wget https://github.com/trapexit/mergerfs/releases/download/<ver>/mergerfs-<ver>.tar.gz
Debian / Ubuntu
$ cd mergerfs
$ sudo tools/install-build-pkgs
$ make deb
$ sudo dpkg -i ../mergerfs_version_arch.deb
RHEL / CentOS /Fedora
$ su -
# cd mergerfs
# tools/install-build-pkgs
# make rpm
# rpm -i rpmbuild/RPMS/<arch>/mergerfs-<version>.<arch>.rpm
Generically
Have git, g++, make, python installed.
$ cd mergerfs
$ make
$ sudo make install
Build options
$ make help
usage: make
make USE_XATTR=0 - build program without xattrs functionality
make STATIC=1 - build static binary
make LTO=1 - build with link time optimization
RUNTIME CONFIG
ioctl
The original runtime config API was via xattr calls. This however became an issue when needing to disable xattr. While slightly less convenient ioctl does not have the same problems and will be the main API going forward.
The keys are the same as the command line option arguments as well as the config file.
requests / commands
All commands take a 4096 byte char buffer.
- read keys: get a nul '\0' delimited list of option keys
- _IOWR(0xDF,0,char[4096]) = 0xD000DF00
- on success ioctl return value is the total length
- read value: get an option value
- _IOWR(0xDF,1,char[4096]) = 0xD000DF01
- the key is passed in via the char buffer as a nul '\0' terminated string
- on success ioctl return value is the total length
- write value: set an option value
- _IOW(0xDF,2,char[4096]) = 0x5000DF02
- the key and value is passed in via the char buffer as a nul '\0' terminated string in the format of
key=value - on success ioctl return value is 0
- file info: get mergerfs metadata info for a file
- _IOWR(0xDF,3,char[4096]) = 0xD000DF03
- the key is passed in via the char buffer as a nul '\0' terminated string
- on success the ioctl return value is the total length
- keys:
- basepath: the base mount point for the file according to the getattr policy
- relpath: the relative path of the file from the mount point
- fullpath: the full path of the underlying file according to the getattr policy
- allpaths: a NUL '\0' delimited list of full paths to all files found
.mergerfs pseudo file (deprecated)
NOTE: this interface will be removed in mergerfs 3.0
<mountpoint>/.mergerfs
There is a pseudo file available at the mount point which allows for the runtime modification of certain mergerfs options. The file will not show up in readdir but can be stat'ed and manipulated via {list,get,set}xattrs calls.
Any changes made at runtime are not persisted. If you wish for values to persist they must be included as options wherever you configure the mounting of mergerfs (/etc/fstab).
Keys
Use xattr -l /mountpoint/.mergerfs to see all supported keys. Some are informational and therefore read-only. setxattr will return EINVAL (invalid argument) on read-only keys.
Values
Same as the command line.
user.mergerfs.branches
NOTE: formerly user.mergerfs.srcmounts but said key is still supported.
Used to query or modify the list of branches. When modifying there are several shortcuts to easy manipulation of the list.
| Value | Description |
|---|---|
| [list] | set |
| +<[list] | prepend |
| +>[list] | append |
| -[list] | remove all values provided |
| -< | remove first in list |
| -> | remove last in list |
xattr -w user.mergerfs.branches +</mnt/drive3 /mnt/pool/.mergerfs
The =NC, =RO, =RW syntax works just as on the command line.
Example
[trapexit:/mnt/mergerfs] $ xattr -l .mergerfs
user.mergerfs.branches: /mnt/a=RW:/mnt/b=RW
user.mergerfs.minfreespace: 4294967295
user.mergerfs.moveonenospc: false
...
[trapexit:/mnt/mergerfs] $ xattr -p user.mergerfs.category.search .mergerfs
ff
[trapexit:/mnt/mergerfs] $ xattr -w user.mergerfs.category.search newest .mergerfs
[trapexit:/mnt/mergerfs] $ xattr -p user.mergerfs.category.search .mergerfs
newest
[trapexit:/mnt/mergerfs] $ xattr -w user.mergerfs.branches +/mnt/c .mergerfs
[trapexit:/mnt/mergerfs] $ xattr -p user.mergerfs.branches .mergerfs
/mnt/a:/mnt/b:/mnt/c
[trapexit:/mnt/mergerfs] $ xattr -w user.mergerfs.branches =/mnt/c .mergerfs
[trapexit:/mnt/mergerfs] $ xattr -p user.mergerfs.branches .mergerfs
/mnt/c
[trapexit:/mnt/mergerfs] $ xattr -w user.mergerfs.branches '+</mnt/a:/mnt/b' .mergerfs
[trapexit:/mnt/mergerfs] $ xattr -p user.mergerfs.branches .mergerfs
/mnt/a:/mnt/b:/mnt/c
file / directory xattrs
While they won't show up when using listxattr mergerfs offers a number of special xattrs to query information about the files served. To access the values you will need to issue a getxattr for one of the following:
- user.mergerfs.basepath: the base mount point for the file given the current getattr policy
- user.mergerfs.relpath: the relative path of the file from the perspective of the mount point
- user.mergerfs.fullpath: the full path of the original file given the getattr policy
- user.mergerfs.allpaths: a NUL ('\0') separated list of full paths to all files found
[trapexit:/mnt/mergerfs] $ ls
A B C
[trapexit:/mnt/mergerfs] $ xattr -p user.mergerfs.fullpath A
/mnt/a/full/path/to/A
[trapexit:/mnt/mergerfs] $ xattr -p user.mergerfs.basepath A
/mnt/a
[trapexit:/mnt/mergerfs] $ xattr -p user.mergerfs.relpath A
/full/path/to/A
[trapexit:/mnt/mergerfs] $ xattr -p user.mergerfs.allpaths A | tr '\0' '\n'
/mnt/a/full/path/to/A
/mnt/b/full/path/to/A
UPGRADE
mergerfs can be upgraded live by mounting on top of the previous version. Simply install the new version of mergerfs and follow the instructions below.
Add nonempty to your mergerfs option list and call mergerfs again or if using /etc/fstab call for it to mount again. Existing open files and such will continue to work fine though they won't see runtime changes since any such change would be the new mount. If you plan on changing settings with the new mount you should / could apply those before mounting the new version.
$ sudo mount /mnt/mergerfs
$ mount | grep mergerfs
media on /mnt/mergerfs type fuse.mergerfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other)
media on /mnt/mergerfs type fuse.mergerfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other)
TOOLING
- https://github.com/trapexit/mergerfs-tools
- mergerfs.ctl: A tool to make it easier to query and configure mergerfs at runtime
- mergerfs.fsck: Provides permissions and ownership auditing and the ability to fix them
- mergerfs.dedup: Will help identify and optionally remove duplicate files
- mergerfs.dup: Ensure there are at least N copies of a file across the pool
- mergerfs.balance: Rebalance files across drives by moving them from the most filled to the least filled
- mergerfs.consolidate: move files within a single mergerfs directory to the drive with most free space
- mergerfs.mktrash: Creates FreeDesktop.org Trash specification compatible directories on a mergerfs mount
- https://github.com/trapexit/scorch
- scorch: A tool to help discover silent corruption of files and keep track of files
- https://github.com/trapexit/bbf
- bbf (bad block finder): a tool to scan for and 'fix' hard drive bad blocks and find the files using those blocks
CACHING
page caching
https://en.wikipedia.org/wiki/Page_cache
tl;dr:
- cache.files=off: Disables page caching. Underlying files cached, mergerfs files are not.
- cache.files=partial: Enables page caching. Underlying files cached, mergerfs files cached while open.
- cache.files=full: Enables page caching. Underlying files cached, mergerfs files cached across opens.
- cache.files=auto-full: Enables page caching. Underlying files cached, mergerfs files cached across opens if mtime and size are unchanged since previous open.
- cache.files=libfuse: follow traditional libfuse
direct_io,kernel_cache, andauto_cachearguments.
FUSE, which mergerfs uses, offers a number of page caching modes. mergerfs tries to simplify their use via the cache.files option. It can and should replace usage of direct_io, kernel_cache, and auto_cache.
Due to mergerfs using FUSE and therefore being a userland process proxying existing filesystems the kernel will double cache the content being read and written through mergerfs. Once from the underlying filesystem and once from mergerfs (it sees them as two separate entities). Using cache.files=off will keep the double caching from happening by disabling caching of mergerfs but this has the side effect that all read and write calls will be passed to mergerfs which may be slower than enabling caching, you lose shared mmap support which can affect apps such as rtorrent, and no read-ahead will take place. The kernel will still cache the underlying filesystem data but that only helps so much given mergerfs will still process all requests.
If you do enable file page caching, cache.files=partial|full|auto-full, you should also enable dropcacheonclose which will cause mergerfs to instruct the kernel to flush the underlying file's page cache when the file is closed. This behavior is the same as the rsync fadvise / drop cache patch and Feh's nocache project.
If most files are read once through and closed (like media) it is best to enable dropcacheonclose regardless of caching mode in order to minimize buffer bloat.
It is difficult to balance memory usage, cache bloat & duplication, and performance. Ideally mergerfs would be able to disable caching for the files it reads/writes but allow page caching for itself. That would limit the FUSE overhead. However, there isn't a good way to achieve this. It would need to open all files with O_DIRECT which places limitations on the what underlying filesystems would be supported and complicates the code.
kernel documentation: https://www.kernel.org/doc/Documentation/filesystems/fuse-io.txt
entry & attribute caching
Given the relatively high cost of FUSE due to the kernel <-> userspace round trips there are kernel side caches for file entries and attributes. The entry cache limits the lookup calls to mergerfs which ask if a file exists. The attribute cache limits the need to make getattr calls to mergerfs which provide file attributes (mode, size, type, etc.). As with the page cache these should not be used if the underlying filesystems are being manipulated at the same time as it could lead to odd behavior or data corruption. The options for setting these are cache.entry and cache.negative_entry for the entry cache and cache.attr for the attributes cache. cache.negative_entry refers to the timeout for negative responses to lookups (non-existent files).
writeback caching
When cache.files is enabled the default is for it to perform writethrough caching. This behavior won't help improve performance as each write still goes one for one through the filesystem. By enabling the FUSE writeback cache small writes may be aggregated by the kernel and then sent to mergerfs as one larger request. This can greatly improve the throughput for apps which write to files inefficiently. The amount the kernel can aggregate is limited by the size of a FUSE message. Read the fuse_msg_size section for more details.
There is a small side effect as a result of enabling wrtieback caching. Underlying files won't ever be opened with O_APPEND or O_WRONLY. The former because the kernel then manages append mode and the latter because the kernel may request file data from mergerfs to populate the write cache. The O_APPEND change means that if a file is changed outside of mergerfs it could lead to corruption as the kernel won't know the end of the file has changed. That said any time you use caching you should keep from using the same file outside of mergerfs at the same time.
Note that if an application is properly sizing writes then writeback caching will have little or no effect. It will only help with writes of sizes below the FUSE message size (128K on older kernels, 1M on newer).
policy caching
Policies are run every time a function (with a policy as mentioned above) is called. These policies can be expensive depending on mergerfs' setup and client usage patterns. Generally we wouldn't want to cache policy results because it may result in stale responses if the underlying drives are used directly.
The open policy cache will cache the result of an open policy for a particular input for cache.open seconds or until the file is unlinked. Each file close (release) will randomly chose to clean up the cache of expired entries.
This cache is really only useful in cases where you have a large number of branches and open is called on the same files repeatedly (like Transmission which opens and closes a file on every read/write presumably to keep file handle usage low).
statfs caching
Of the syscalls used by mergerfs in policies the statfs / statvfs call is perhaps the most expensive. It's used to find out the available space of a drive and whether it is mounted read-only. Depending on the setup and usage pattern these queries can be relatively costly. When cache.statfs is enabled all calls to statfs by a policy will be cached for the number of seconds its set to.
Example: If the create policy is mfs and the timeout is 60 then for that 60 seconds the same drive will be returned as the target for creates because the available space won't be updated for that time.
symlink caching
As of version 4.20 Linux supports symlink caching. Significant performance increases can be had in workloads which use a lot of symlinks. Setting cache.symlinks=true will result in requesting symlink caching from the kernel only if supported. As a result its safe to enable it on systems prior to 4.20. That said it is disabled by default for now. You can see if caching is enabled by querying the xattr user.mergerfs.cache.symlinks but given it must be requested at startup you can not change it at runtime.
readdir caching
As of version 4.20 Linux supports readdir caching. This can have a significant impact on directory traversal. Especially when combined with entry (cache.entry) and attribute (cache.attr) caching. Setting cache.readdir=true will result in requesting readdir caching from the kernel on each opendir. If the kernel doesn't support readdir caching setting the option to true has no effect. This option is configurable at runtime via xattr user.mergerfs.cache.readdir.
tiered caching
Some storage technologies support what some call "tiered" caching. The placing of usually smaller, faster storage as a transparent cache to larger, slower storage. NVMe, SSD, Optane in front of traditional HDDs for instance.
MergerFS does not natively support any sort of tiered caching. Most users have no use for such a feature and its inclusion would complicate the code. However, there are a few situations where a cache drive could help with a typical mergerfs setup.
- Fast network, slow drives, many readers: You've a 10+Gbps network with many readers and your regular drives can't keep up.
- Fast network, slow drives, small'ish bursty writes: You have a 10+Gbps network and wish to transfer amounts of data less than your cache drive but wish to do so quickly.
With #1 its arguable if you should be using mergerfs at all. RAID would probably be the better solution. If you're going to use mergerfs there are other tactics that may help: spreading the data across drives (see the mergerfs.dup tool) and setting func.open=rand, using symlinkify, or using dm-cache or a similar technology to add tiered cache to the underlying device.
With #2 one could use dm-cache as well but there is another solution which requires only mergerfs and a cronjob.
- Create 2 mergerfs pools. One which includes just the slow drives and one which has both the fast drives (SSD,NVME,etc.) and slow drives.
- The 'cache' pool should have the cache drives listed first.
- The best
createpolicies to use for the 'cache' pool would probably beff,epff,lfs, oreplfs. The latter two under the assumption that the cache drive(s) are far smaller than the backing drives. If using path preserving policies remember that you'll need to manually create the core directories of those paths you wish to be cached. Be sure the permissions are in sync. Usemergerfs.fsckto check / correct them. You could also tag the slow drives as=NCthough that'd mean if the cache drives fill you'd get "out of space" errors. - Enable
moveonenospcand setminfreespaceappropriately. To make sure there is enough room on the "slow" pool you might want to setminfreespaceto at least as large as the size of the largest cache drive if not larger. This way in the worst case the whole of the cache drive(s) can be moved to the other drives. - Set your programs to use the cache pool.
- Save one of the below scripts or create you're own.
- Use
cron(as root) to schedule the command at whatever frequency is appropriate for your workflow.
time based expiring
Move files from cache to backing pool based only on the last time the file was accessed. Replace -atime with -amin if you want minutes rather than days. May want to use the fadvise / --drop-cache version of rsync or run rsync with the tool "nocache".
#!/bin/bash
if [ $# != 3 ]; then
echo "usage: $0 <cache-drive> <backing-pool> <days-old>"
exit 1
fi
CACHE="${1}"
BACKING="${2}"
N=${3}
find "${CACHE}" -type f -atime +${N} -printf '%P\n' | \
rsync --files-from=- -axqHAXWES --preallocate --remove-source-files "${CACHE}/" "${BACKING}/"
percentage full expiring
Move the oldest file from the cache to the backing pool. Continue till below percentage threshold.
#!/bin/bash
if [ $# != 3 ]; then
echo "usage: $0 <cache-drive> <backing-pool> <percentage>"
exit 1
fi
CACHE="${1}"
BACKING="${2}"
PERCENTAGE=${3}
set -o errexit
while [ $(df --output=pcent "${CACHE}" | grep -v Use | cut -d'%' -f1) -gt ${PERCENTAGE} ]
do
FILE=$(find "${CACHE}" -type f -printf '%A@ %P\n' | \
sort | \
head -n 1 | \
cut -d' ' -f2-)
test -n "${FILE}"
rsync -axqHAXWES --preallocate --remove-source-files "${CACHE}/./${FILE}" "${BACKING}/"
done
PERFORMANCE
mergerfs is at its core just a proxy and therefore its theoretical max performance is that of the underlying devices. However, given it is a FUSE filesystem working from userspace there is an increase in overhead relative to kernel based solutions. That said the performance can match the theoretical max but it depends greatly on the system's configuration. Especially when adding network filesystems into the mix there are many variables which can impact performance. Drive speeds and latency, network speeds and latency, general concurrency, read/write sizes, etc. Unfortunately, given the number of variables it has been difficult to find a single set of settings which provide optimal performance. If you're having performance issues please look over the suggestions below (including the benchmarking section.)
NOTE: be sure to read about these features before changing them to understand what behaviors it may impact
- enable (or disable)
splice_move,splice_read, andsplice_write - disable
security_capabilityand/orxattr - increase cache timeouts
cache.attr,cache.entry,cache.negative_entry - enable (or disable) page caching (
cache.files) - enable
cache.writeback - enable
cache.open - enable
cache.statfs - enable
cache.symlinks - enable
cache.readdir - change the number of worker threads
- disable
posix_acl - disable
async_read - test theoretical performance using
nullrwor mounting a ram disk - use
symlinkifyif your data is largely static and read-only - use tiered cache drives
- use LVM and LVM cache to place a SSD in front of your HDDs
If you come across a setting that significantly impacts performance please contact trapexit so he may investigate further.
BENCHMARKING
Filesystems are complicated. They do many things and many of those are interconnected. Additionally, the OS, drivers, hardware, etc. all can impact performance. Therefore, when benchmarking, it is necessary that the test focus as narrowly as possible.
For most throughput is the key benchmark. To test throughput dd is useful but must be used with the correct settings in order to ensure the filesystem or device is actually being tested. The OS can and will cache data. Without forcing synchronous reads and writes and/or disabling caching the values returned will not be representative of the device's true performance.
When benchmarking through mergerfs ensure you only use 1 branch to remove any possibility of the policies complicating the situation. Benchmark the underlying filesystem first and then mount mergerfs over it and test again. If you're experience speeds below your expectation you will need to narrow down precisely which component is leading to the slowdown. Preferably test the following in the order listed (but not combined).
- Enable
nullrwmode withnullrw=true. This will effectively make reads and writes no-ops. Removing the underlying device / filesystem from the equation. This will give us the top theoretical speeds. - Mount mergerfs over
tmpfs.tmpfsis a RAM disk. Extremely high speed and very low latency. This is a more realistic best case scenario. Example:mount -t tmpfs -o size=2G tmpfs /tmp/tmpfs - Mount mergerfs over a local drive. NVMe, SSD, HDD, etc. If you have more than one I'd suggest testing each of them as drives and/or controllers (their drivers) could impact performance.
- Finally, if you intend to use mergerfs with a network filesystem, either as the source of data or to combine with another through mergerfs, test each of those alone as above.
Once you find the component which has the performance issue you can do further testing with different options to see if they impact performance. For reads and writes the most relevant would be: cache.files, async_read, splice_move, splice_read, splice_write. Less likely but relevant when using NFS or with certain filesystems would be security_capability, xattr, and posix_acl. If you find a specific system, drive, filesystem, controller, etc. that performs poorly contact trapexit so he may investigate further.
Sometimes the problem is really the application accessing or writing data through mergerfs. Some software use small buffer sizes which can lead to more requests and therefore greater overhead. You can test this out yourself by replace bs=1M in the examples below with ibs or obs and using a size of 512 instead of 1M. In one example test using nullrw the write speed dropped from 4.9GB/s to 69.7MB/s when moving from 1M to 512. Similar results were had when testing reads. Small writes overhead may be improved by leveraging a write cache but in casual tests little gain was found. More tests will need to be done before this feature would become available. If you have an app that appears slow with mergerfs it could be due to this. Contact trapexit so he may investigate further.
write benchmark
$ dd if=/dev/zero of=/mnt/mergerfs/1GB.file bs=1M count=1024 oflag=nocache conv=fdatasync status=progress
read benchmark
$ dd if=/mnt/mergerfs/1GB.file of=/dev/null bs=1M count=1024 iflag=nocache conv=fdatasync status=progress
TIPS / NOTES
- use_ino will only work when used with mergerfs 2.18.0 and above.
- Run mergerfs as
root(with allow_other) unless you're merging paths which are owned by the same user otherwise strange permission issues may arise. - https://github.com/trapexit/backup-and-recovery-howtos : A set of guides / howtos on creating a data storage system, backing it up, maintaining it, and recovering from failure.
- If you don't see some directories and files you expect in a merged point or policies seem to skip drives be sure the user has permission to all the underlying directories. Use
mergerfs.fsckto audit the drive for out of sync permissions. - Do not use
cache.files=off(ordirect_io) if you expect applications (such as rtorrent) to mmap files. Shared mmap is not currently supported in FUSE w/direct_ioenabled. Enablingdropcacheoncloseis recommended whencache.files=partial|full|auto-fullordirect_io=false. - Since POSIX functions give only a singular error or success its difficult to determine the proper behavior when applying the function to multiple targets. mergerfs will return an error only if all attempts of an action fail. Any success will lead to a success returned. This means however that some odd situations may arise.
- Kodi, Plex, Subsonic, etc. can use directory mtime to more efficiently determine whether to scan for new content rather than simply performing a full scan. If using the default getattr policy of ff it's possible those programs will miss an update on account of it returning the first directory found's stat info and its a later directory on another mount which had the mtime recently updated. To fix this you will want to set func.getattr=newest. Remember though that this is just stat. If the file is later open'ed or unlink'ed and the policy is different for those then a completely different file or directory could be acted on.
- Some policies mixed with some functions may result in strange behaviors. Not that some of these behaviors and race conditions couldn't happen outside mergerfs but that they are far more likely to occur on account of the attempt to merge together multiple sources of data which could be out of sync due to the different policies.
- For consistency its generally best to set category wide policies rather than individual func's. This will help limit the confusion of tools such as rsync. However, the flexibility is there if needed.
KNOWN ISSUES / BUGS
directory mtime is not being updated
Remember that the default policy for getattr is ff. The information for the first directory found will be returned. If it wasn't the directory which had been updated then it will appear outdated.
The reason this is the default is because any other policy would be more expensive and for many applications it is unnecessary. To always return the directory with the most recent mtime or a faked value based on all found would require a scan of all drives.
If you always want the directory information from the one with the most recent mtime then use the newest policy for getattr.
'mv /mnt/pool/foo /mnt/disk1/foo' removes 'foo'
This is not a bug.
Run in verbose mode to better understand what's happening:
$ mv -v /mnt/pool/foo /mnt/disk1/foo
copied '/mnt/pool/foo' -> '/mnt/disk1/foo'
removed '/mnt/pool/foo'
$ ls /mnt/pool/foo
ls: cannot access '/mnt/pool/foo': No such file or directory
mv, when working across devices, is copying the source to target and then removing the source. Since the source is the target in this case, depending on the unlink policy, it will remove the just copied file and other files across the branches.
If you want to move files to one drive just copy them there and use mergerfs.dedup to clean up the old paths or manually remove them from the branches directly.
cached memory appears greater than it should be
Use cache.files=off and/or dropcacheonclose=true. See the section on page caching.
NFS clients returning ESTALE / Stale file handle
NFS does not like out of band changes. That is especially true of inode values.
Be sure to use the following options:
- noforget
- use_ino
- inodecalc=path-hash
rtorrent fails with ENODEV (No such device)
Be sure to set cache.files=partial|full|auto-full or turn off direct_io. rtorrent and some other applications use mmap to read and write to files and offer no fallback to traditional methods. FUSE does not currently support mmap while using direct_io. There may be a performance penalty on writes with direct_io off as well as the problem of double caching but it's the only way to get such applications to work. If the performance loss is too high for other apps you can mount mergerfs twice. Once with direct_io enabled and one without it. Be sure to set dropcacheonclose=true if not using direct_io.
rtorrent fails with files >= 4GiB
This is a kernel bug with mmap and FUSE on 32bit platforms. A fix should become available for all LTS releases.
https://marc.info/?l=linux-fsdevel&m=155550785230874&w=2
Crashing on OpenVZ
There appears to be a bug in the OpenVZ kernel with regard to how it handles ioctl calls. It is making invalid requests which leads to a crash. As of 2019-12-10 there is a bug report filed with OpenVZ but it is not yet fixed.
Plex doesn't work with mergerfs
It does. If you're trying to put Plex's config / metadata on mergerfs you have to leave direct_io off because Plex is using sqlite3 which apparently needs mmap. mmap doesn't work with direct_io. To fix this place the data elsewhere or disable direct_io (with dropcacheonclose=true). Sqlite3 does not need mmap but the developer needs to fall back to standard IO if mmap fails.
If the issue is that scanning doesn't seem to pick up media then be sure to set func.getattr=newest as mentioned above.
mmap performance is really bad
There is/was a bug in caching which affects overall performance of mmap through FUSE in Linux 4.x kernels. It is fixed in 4.4.10 and 4.5.4.
When a program tries to move or rename a file it fails
Please read the section above regarding rename & link.
The problem is that many applications do not properly handle EXDEV errors which rename and link may return even though they are perfectly valid situations which do not indicate actual drive or OS errors. The error will only be returned by mergerfs if using a path preserving policy as described in the policy section above. If you do not care about path preservation simply change the mergerfs policy to the non-path preserving version. For example: -o category.create=mfs
Ideally the offending software would be fixed and it is recommended that if you run into this problem you contact the software's author and request proper handling of EXDEV errors.
Samba: Moving files / directories fails
Workaround: Copy the file/directory and then remove the original rather than move.
This isn't an issue with Samba but some SMB clients. GVFS-fuse v1.20.3 and prior (found in Ubuntu 14.04 among others) failed to handle certain error codes correctly. Particularly STATUS_NOT_SAME_DEVICE which comes from the EXDEV which is returned by rename when the call is crossing mount points. When a program gets an EXDEV it needs to explicitly take an alternate action to accomplish its goal. In the case of mv or similar it tries rename and on EXDEV falls back to a manual copying of data between the two locations and unlinking the source. In these older versions of GVFS-fuse if it received EXDEV it would translate that into EIO. This would cause mv or most any application attempting to move files around on that SMB share to fail with a IO error.
GVFS-fuse v1.22.0 and above fixed this issue but a large number of systems use the older release. On Ubuntu the version can be checked by issuing apt-cache showpkg gvfs-fuse. Most distros released in 2015 seem to have the updated release and will work fine but older systems may not. Upgrading gvfs-fuse or the distro in general will address the problem.
In Apple's MacOSX 10.9 they replaced Samba (client and server) with their own product. It appears their new client does not handle EXDEV either and responds similar to older release of gvfs on Linux.
Trashing files occasionally fails
This is the same issue as with Samba. rename returns EXDEV (in our case that will really only happen with path preserving policies like epmfs) and the software doesn't handle the situation well. This is unfortunately a common failure of software which moves files around. The standard indicates that an implementation MAY choose to support non-user home directory trashing of files (which is a MUST). The implementation MAY also support "top directory trashes" which many probably do.
To create a $topdir/.Trash directory as defined in the standard use the mergerfs-tools tool mergerfs.mktrash.
tar: Directory renamed before its status could be extracted
Make sure to use the use_ino option.
Supplemental user groups
Due to the overhead of getgroups/setgroups mergerfs utilizes a cache. This cache is opportunistic and per thread. Each thread will query the supplemental groups for a user when that particular thread needs to change credentials and will keep that data for the lifetime of the thread. This means that if a user is added to a group it may not be picked up without the restart of mergerfs. However, since the high level FUSE API's (at least the standard version) thread pool dynamically grows and shrinks it's possible that over time a thread will be killed and later a new thread with no cache will start and query the new data.
The gid cache uses fixed storage to simplify the design and be compatible with older systems which may not have C++11 compilers. There is enough storage for 256 users' supplemental groups. Each user is allowed up to 32 supplemental groups. Linux >= 2.6.3 allows up to 65535 groups per user but most other *nixs allow far less. NFS allowing only 16. The system does handle overflow gracefully. If the user has more than 32 supplemental groups only the first 32 will be used. If more than 256 users are using the system when an uncached user is found it will evict an existing user's cache at random. So long as there aren't more than 256 active users this should be fine. If either value is too low for your needs you will have to modify gidcache.hpp to increase the values. Note that doing so will increase the memory needed by each thread.
While not a bug some users have found when using containers that supplemental groups defined inside the container don't work properly with regard to permissions. This is expected as mergerfs lives outside the container and therefore is querying the host's group database. There might be a hack to work around this (make mergerfs read the /etc/group file in the container) but it is not yet implemented and would be limited to Linux and the /etc/group DB. Preferably users would mount in the host group file into the containers or use a standard shared user & groups technology like NIS or LDAP.
mergerfs or libfuse crashing
First... always upgrade to the latest version unless told otherwise.
If using mergerfs below 2.22.0:
If suddenly the mergerfs mount point disappears and Transport endpoint is not connected is returned when attempting to perform actions within the mount directory and the version of libfuse (use mergerfs -v to find the version) is older than 2.9.4 its likely due to a bug in libfuse. Affected versions of libfuse can be found in Debian Wheezy, Ubuntu Precise and others.
In order to fix this please install newer versions of libfuse. If using a Debian based distro (Debian,Ubuntu,Mint) you can likely just install newer versions of libfuse and fuse from the repo of a newer release.
If using mergerfs at or above 2.22.0:
First upgrade if possible, check the known bugs section, and contact trapexit.
mergerfs appears to be crashing or exiting
There seems to be an issue with Linux version 4.9.0 and above in which an invalid message appears to be transmitted to libfuse (used by mergerfs) causing it to exit. No messages will be printed in any logs as it's not a proper crash. Debugging of the issue is still ongoing and can be followed via the fuse-devel thread.
mergerfs under heavy load and memory pressure leads to kernel panic
https://lkml.org/lkml/2016/9/14/527
[25192.515454] kernel BUG at /build/linux-a2WvEb/linux-4.4.0/mm/workingset.c:346!
[25192.517521] invalid opcode: 0000 [#1] SMP
[25192.519602] Modules linked in: netconsole ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 configfs binfmt_misc veth bridge stp llc nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack ip6table_filter ip6_tables xt_multiport iptable_filter ipt_MASQUERADE nf_nat_masquerade_ipv4 xt_comment xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack xt_CHECKSUM xt_tcpudp iptable_mangle ip_tables x_tables intel_rapl x86_pkg_temp_thermal intel_powerclamp eeepc_wmi asus_wmi coretemp sparse_keymap kvm_intel ppdev kvm irqbypass mei_me 8250_fintek input_leds serio_raw parport_pc tpm_infineon mei shpchp mac_hid parport lpc_ich autofs4 drbg ansi_cprng dm_crypt algif_skcipher af_alg btrfs raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear raid10 raid1 i915 crct10dif_pclmul crc32_pclmul aesni_intel i2c_algo_bit aes_x86_64 drm_kms_helper lrw gf128mul glue_helper ablk_helper syscopyarea cryptd sysfillrect sysimgblt fb_sys_fops drm ahci r8169 libahci mii wmi fjes video [last unloaded: netconsole]
[25192.540910] CPU: 2 PID: 63 Comm: kswapd0 Not tainted 4.4.0-36-generic #55-Ubuntu
[25192.543411] Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013
[25192.545840] task: ffff88040cae6040 ti: ffff880407488000 task.ti: ffff880407488000
[25192.548277] RIP: 0010:[<ffffffff811ba501>] [<ffffffff811ba501>] shadow_lru_isolate+0x181/0x190
[25192.550706] RSP: 0018:ffff88040748bbe0 EFLAGS: 00010002
[25192.553127] RAX: 0000000000001c81 RBX: ffff8802f91ee928 RCX: ffff8802f91eeb38
[25192.555544] RDX: ffff8802f91ee938 RSI: ffff8802f91ee928 RDI: ffff8804099ba2c0
[25192.557914] RBP: ffff88040748bc08 R08: 000000000001a7b6 R09: 000000000000003f
[25192.560237] R10: 000000000001a750 R11: 0000000000000000 R12: ffff8804099ba2c0
[25192.562512] R13: ffff8803157e9680 R14: ffff8803157e9668 R15: ffff8804099ba2c8
[25192.564724] FS: 0000000000000000(0000) GS:ffff88041f280000(0000) knlGS:0000000000000000
[25192.566990] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[25192.569201] CR2: 00007ffabb690000 CR3: 0000000001e0a000 CR4: 00000000000406e0
[25192.571419] Stack:
[25192.573550] ffff8804099ba2c0 ffff88039e4f86f0 ffff8802f91ee928 ffff8804099ba2c8
[25192.575695] ffff88040748bd08 ffff88040748bc58 ffffffff811b99bf 0000000000000052
[25192.577814] 0000000000000000 ffffffff811ba380 000000000000008a 0000000000000080
[25192.579947] Call Trace:
[25192.582022] [<ffffffff811b99bf>] __list_lru_walk_one.isra.3+0x8f/0x130
[25192.584137] [<ffffffff811ba380>] ? memcg_drain_all_list_lrus+0x190/0x190
[25192.586165] [<ffffffff811b9a83>] list_lru_walk_one+0x23/0x30
[25192.588145] [<ffffffff811ba544>] scan_shadow_nodes+0x34/0x50
[25192.590074] [<ffffffff811a0e9d>] shrink_slab.part.40+0x1ed/0x3d0
[25192.591985] [<ffffffff811a53da>] shrink_zone+0x2ca/0x2e0
[25192.593863] [<ffffffff811a64ce>] kswapd+0x51e/0x990
[25192.595737] [<ffffffff811a5fb0>] ? mem_cgroup_shrink_node_zone+0x1c0/0x1c0
[25192.597613] [<ffffffff810a0808>] kthread+0xd8/0xf0
[25192.599495] [<ffffffff810a0730>] ? kthread_create_on_node+0x1e0/0x1e0
[25192.601335] [<ffffffff8182e34f>] ret_from_fork+0x3f/0x70
[25192.603193] [<ffffffff810a0730>] ? kthread_create_on_node+0x1e0/0x1e0
There is a bug in the kernel. A work around appears to be turning off splice. Don't add the splice_* arguments or add no_splice_write,no_splice_move,no_splice_read. This, however, is not guaranteed to work.
rm: fts_read failed: No such file or directory
Please update. This is only happened to mergerfs versions at or below v2.25.x and will not occur in more recent versions.
FAQ
How well does mergerfs scale? Is it "production ready?"
Users have reported running mergerfs on everything from a Raspberry Pi to dual socket Xeon systems with >20 cores. I'm aware of at least a few companies which use mergerfs in production. Open Media Vault includes mergerfs as its sole solution for pooling drives. The author of mergerfs had it running for over 300 days managing 16+ drives with reasonably heavy 24/7 read and write usage. Stopping only after the machine's power supply died.
Most serious issues (crashes or data corruption) have been due to kernel bugs. All of which are fixed in stable releases.
Can mergerfs be used with drives which already have data / are in use?
Yes. MergerFS is a proxy and does NOT interfere with the normal form or function of the drives / mounts / paths it manages.
MergerFS is not a traditional filesystem. MergerFS is not RAID. It does not manipulate the data that passes through it. It does not shard data across drives. It merely shards some behavior and aggregates others.
Can mergerfs be removed without affecting the data?
See the previous question's answer.
What policies should I use?
Unless you're doing something more niche the average user is probably best off using mfs for category.create. It will spread files out across your branches based on available space. Use mspmfs if you want to try to colocate the data a bit more. You may want to use lus if you prefer a slightly different distribution of data if you have a mix of smaller and larger drives. Generally though mfs, lus, or even rand are good for the general use case. If you are starting with an imbalanced pool you can use the tool mergerfs.balance to redistribute files across the pool.
If you really wish to try to colocate files based on directory you can set func.create to epmfs or similar and func.mkdir to rand or eprand depending on if you just want to colocate generally or on specific branches. Either way the need to colocate is rare. For instance: if you wish to remove the drive regularly and want the data to predictably be on that drive or if you don't use backup at all and don't wish to replace that data piecemeal. In which case using path preservation can help but will require some manual attention. Colocating after the fact can be accomplished using the mergerfs.consolidate tool. If you don't need strict colocation which the ep policies provide then you can use the msp based policies which will walk back the path till finding a branch that works.
Ultimately there is no correct answer. It is a preference or based on some particular need. mergerfs is very easy to test and experiment with. I suggest creating a test setup and experimenting to get a sense of what you want.
The reason mfs is not the default category.create policy is historical. When/if a 3.X gets released it will be changed to minimize confusion people often have with path preserving policies.
What settings should I use?
Depends on what features you want. Generally speaking there are no "wrong" settings. All settings are performance or feature related. The best bet is to read over the available options and choose what fits your situation. If something isn't clear from the documentation please reach out and the documentation will be improved.
That said, for the average person, the following should be fine:
-o use_ino,cache.files=off,dropcacheonclose=true,allow_other,category.create=mfs
Why are all my files ending up on 1 drive?!
Did you start with empty drives? Did you explicitly configure a category.create policy? Are you using an existing path / path preserving policy?
The default create policy is epmfs. That is a path preserving algorithm. With such a policy for mkdir and create with a set of empty drives it will select only 1 drive when the first directory is created. Anything, files or directories, created in that first directory will be placed on the same branch because it is preserving paths.
This catches a lot of new users off guard but changing the default would break the setup for many existing users. If you do not care about path preservation and wish your files to be spread across all your drives change to mfs or similar policy as described above. If you do want path preservation you'll need to perform the manual act of creating paths on the drives you want the data to land on before transferring your data. Setting func.mkdir=epall can simplify managing path preservation for create. Or use func.mkdir=rand if you're interested in just grouping together directory content by drive.
Do hard links work?
Yes. You need to use use_ino to support proper reporting of inodes but they work regardless. See also the option inodecalc.
What mergerfs does not do is fake hard links across branches. Read the section "rename & link" for how it works.
Does mergerfs support CoW / copy-on-write?
Not in the sense of a filesystem like BTRFS or ZFS nor in the overlayfs or aufs sense. It does offer a cow-shell like hard link breaking (copy to temp file then rename over original) which can be useful when wanting to save space by hardlinking duplicate files but wish to treat each name as if it were a unique and separate file.
Why can't I see my files / directories?
It's almost always a permissions issue. Unlike mhddfs and unionfs-fuse, which runs as root and attempts to access content as such, mergerfs always changes its credentials to that of the caller. This means that if the user does not have access to a file or directory than neither will mergerfs. However, because mergerfs is creating a union of paths it may be able to read some files and directories on one drive but not another resulting in an incomplete set.
Whenever you run into a split permission issue (seeing some but not all files) try using mergerfs.fsck tool to check for and fix the mismatch. If you aren't seeing anything at all be sure that the basic permissions are correct. The user and group values are correct and that directories have their executable bit set. A common mistake by users new to Linux is to chmod -R 644 when they should have chmod -R u=rwX,go=rX.
If using a network filesystem such as NFS, SMB, CIFS (Samba) be sure to pay close attention to anything regarding permissioning and users. Root squashing and user translation for instance has bitten a few mergerfs users. Some of these also affect the use of mergerfs from container platforms such as Docker.
Is my OS's libfuse needed for mergerfs to work?
No. Normally mount.fuse is needed to get mergerfs (or any FUSE filesystem to mount using the mount command but in vendoring the libfuse library the mount.fuse app has been renamed to mount.mergerfs meaning the filesystem type in fstab can simply be mergerfs. That said there should be no harm in having it installed and continuing to using fuse.mergerfs as the type in /etc/fstab.
If mergerfs doesn't work as a type it could be due to how the mount.mergerfs tool was installed. Must be in /sbin/ with proper permissions.
Why was libfuse embedded into mergerfs?
- A significant number of users use mergerfs on distros with old versions of libfuse which have serious bugs. Requiring updated versions of libfuse on those distros isn't practical (no package offered, user inexperience, etc.). The only practical way to provide a stable runtime on those systems was to "vendor" / embed the library into the project.
- mergerfs was written to use the high level API. There are a number of limitations in the HLAPI that make certain features difficult or impossible to implement. While some of these features could be patched into newer versions of libfuse without breaking the public API some of them would require hacky code to provide backwards compatibility. While it may still be worth working with upstream to address these issues in future versions, since the library needs to be vendored for stability and compatibility reasons it is preferable / easier to modify the API. Longer term the plan is to rewrite mergerfs to use the low level API.
Why did support for system libfuse get removed?
See above first.
If/when mergerfs is rewritten to use the low-level API then it'll be plausible to support system libfuse but till then its simply too much work to manage the differences across the versions.
Why use mergerfs over mhddfs?
mhddfs is no longer maintained and has some known stability and security issues (see below). MergerFS provides a superset of mhddfs' features and should offer the same or maybe better performance.
Below is an example of mhddfs and mergerfs setup to work similarly.
mhddfs -o mlimit=4G,allow_other /mnt/drive1,/mnt/drive2 /mnt/pool
mergerfs -o minfreespace=4G,allow_other,category.create=ff /mnt/drive1:/mnt/drive2 /mnt/pool
Why use mergerfs over aufs?
aufs is mostly abandoned and no longer available in many distros.
While aufs can offer better peak performance mergerfs provides more configurability and is generally easier to use. mergerfs however does not offer the overlay / copy-on-write (CoW) features which aufs and overlayfs have.
Why use mergerfs over unionfs?
UnionFS is more like aufs than mergerfs in that it offers overlay / CoW features. If you're just looking to create a union of drives and want flexibility in file/directory placement then mergerfs offers that whereas unionfs is more for overlaying RW filesystems over RO ones.
Why use mergerfs over overlayfs?
Same reasons as with unionfs.
Why use mergerfs over LVM/ZFS/BTRFS/RAID0 drive concatenation / striping?
With simple JBOD / drive concatenation / stripping / RAID0 a single drive failure will result in full pool failure. mergerfs performs a similar function without the possibility of catastrophic failure and the difficulties in recovery. Drives may fail, however, all other data will continue to be accessible.
When combined with something like SnapRaid and/or an offsite backup solution you can have the flexibility of JBOD without the single point of failure.
Why use mergerfs over ZFS?
MergerFS is not intended to be a replacement for ZFS. MergerFS is intended to provide flexible pooling of arbitrary drives (local or remote), of arbitrary sizes, and arbitrary filesystems. For write once, read many usecases such as bulk media storage. Where data integrity and backup is managed in other ways. In that situation ZFS can introduce a number of costs and limitations as described here, here, and here.
Why use mergerfs over UnRAID?
UnRAID is a full OS and its storage layer, as I understand, is proprietary and closed source. Users who have experience with both have said they prefer the flexibility offered by mergerfs and for some the fact it is free and open source is important.
There are a number of UnRAID users who use mergerfs as well though I'm not entirely familiar with the use case.
What should mergerfs NOT be used for?
-
databases: Even if the database stored data in separate files (mergerfs wouldn't offer much otherwise) the higher latency of the indirection will kill performance. If it is a lightly used SQLITE database then it may be fine but you'll need to test.
-
VM images: For the same reasons as databases. VM images are accessed very aggressively and mergerfs will introduce too much latency (if it works at all).
-
As replacement for RAID: mergerfs is just for pooling branches. If you need that kind of device performance aggregation or high availability you should stick with RAID.
Can drives be written to directly? Outside of mergerfs while pooled?
Yes, however it's not recommended to use the same file from within the pool and from without at the same time (particularly writing). Especially if using caching of any kind (cache.files, cache.entry, cache.attr, cache.negative_entry, cache.symlinks, cache.readdir, etc.) as there could be a conflict between cached data and not.
Why do I get an "out of space" / "no space left on device" / ENOSPC error even though there appears to be lots of space available?
First make sure you've read the sections above about policies, path preservation, branch filtering, and the options minfreespace, moveonenospc, statfs, and statfs_ignore.
mergerfs is simply presenting a union of the content within multiple branches. The reported free space is an aggregate of space available within the pool (behavior modified by statfs and statfs_ignore). It does not represent a contiguous space. In the same way that read-only filesystems, those with quotas, or reserved space report the full theoretical space available.
Due to path preservation, branch tagging, read-only status, and minfreespace settings it is perfectly valid that ENOSPC / "out of space" / "no space left on device" be returned. It is doing what was asked of it: filtering possible branches due to those settings. Only one error can be returned and if one of the reasons for filtering a branch was minfreespace then it will be returned as such. moveonenospc is only relevant to writing a file which is too large for the drive its currently on.
It is also possible that the filesystem selected has run out of inodes. Use df -i to list the total and available inodes per filesystem.
If you don't care about path preservation then simply change the create policy to one which isn't. mfs is probably what most are looking for. The reason it's not default is because it was originally set to epmfs and changing it now would change people's setup. Such a setting change will likely occur in mergerfs 3.
Why does the total available space in mergerfs not equal outside?
Are you using ext2/3/4? With reserve for root? mergerfs uses available space for statfs calculations. If you've reserved space for root then it won't show up.
You can remove the reserve by running: tune2fs -m 0 <device>
Can mergerfs mounts be exported over NFS?
Yes, however if you do anything which may changes files out of band (including for example using the newest policy) it will result in "stale file handle" errors unless properly setup.
Be sure to use the following options:
- noforget
- use_ino
- inodecalc=path-hash
Can mergerfs mounts be exported over Samba / SMB?
Yes. While some users have reported problems it appears to always be related to how Samba is setup in relation to permissions.
Can mergerfs mounts be used over SSHFS?
Yes.
I notice massive slowdowns of writes when enabling cache.files.
When file caching is enabled in any form (cache.files!=off or direct_io=false) it will issue getxattr requests for security.capability prior to every single write. This will usually result in a performance degregation, especially when using a network filesystem (such as NFS or CIFS/SMB/Samba.) Unfortunately at this moment the kernel is not caching the response.
To work around this situation mergerfs offers a few solutions.
- Set
security_capability=false. It will short circuit any call and returnENOATTR. This still means though that mergerfs will receive the request before every write but at least it doesn't get passed through to the underlying filesystem. - Set
xattr=noattr. Same as above but applies to all calls to getxattr. Not justsecurity.capability. This will not be cached by the kernel either but mergerfs' runtime config system will still function. - Set
xattr=nosys. Results in mergerfs returningENOSYSwhich will be cached by the kernel. No future xattr calls will be forwarded to mergerfs. The downside is that also means the xattr based config and query functionality won't work either. - Disable file caching. If you aren't using applications which use
mmapit's probably simpler to just disable it all together. The kernel won't send the requests when caching is disabled.
What are these .fuse_hidden files?
Please upgrade. mergerfs >= 2.26.0 will not have these temporary files. See the notes on unlink.
It's mentioned that there are some security issues with mhddfs. What are they? How does mergerfs address them?
mhddfs manages running as root by calling getuid() and if it returns 0 then it will chown the file. Not only is that a race condition but it doesn't handle other situations. Rather than attempting to simulate POSIX ACL behavior the proper way to manage this is to use seteuid and setegid, in effect becoming the user making the original call, and perform the action as them. This is what mergerfs does and why mergerfs should always run as root.
In Linux setreuid syscalls apply only to the thread. GLIBC hides this away by using realtime signals to inform all threads to change credentials. Taking after Samba, mergerfs uses syscall(SYS_setreuid,...) to set the callers credentials for that thread only. Jumping back to root as necessary should escalated privileges be needed (for instance: to clone paths between drives).
For non-Linux systems mergerfs uses a read-write lock and changes credentials only when necessary. If multiple threads are to be user X then only the first one will need to change the processes credentials. So long as the other threads need to be user X they will take a readlock allowing multiple threads to share the credentials. Once a request comes in to run as user Y that thread will attempt a write lock and change to Y's credentials when it can. If the ability to give writers priority is supported then that flag will be used so threads trying to change credentials don't starve. This isn't the best solution but should work reasonably well assuming there are few users.
SUPPORT
Filesystems are complex and difficult to debug. mergerfs, while being just a proxy of sorts, is also very difficult to debug given the large number of possible settings it can have itself and the massive number of environments it can run in. When reporting on a suspected issue please, please include as much of the below information as possible otherwise it will be difficult or impossible to diagnose. Also please make sure to read all of the above documentation as it includes nearly every known system or user issue previously encountered.
Please make sure you are using the latest release or have tried it in comparison. Old versions, which are often included in distros like Debian and Ubuntu, are not ever going to be updated and your bug may have been addressed already.
Information to include in bug reports
- Version of mergerfs:
mergerfs -V - mergerfs settings: from
/etc/fstabor command line execution - Version of Linux:
uname -a - Versions of any additional software being used
- List of drives, their filesystems, and sizes (before and after issue):
df -h - All information about the relevant branches and paths: permissions, etc.
- A
straceof the app having problems:strace -f -o /tmp/app.strace.txt <cmd>
- A
straceof mergerfs while the program is trying to do whatever it's failing to do:strace -f -p <mergerfsPID> -o /tmp/mergerfs.strace.txt
- Precise directions on replicating the issue. Do not leave anything out.
- Try to recreate the problem in the simplist way using standard programs.
Contact / Issue submission
- github.com: https://github.com/trapexit/mergerfs/issues
- email: trapexit@spawn.link
- twitter: https://twitter.com/_trapexit
- reddit: https://www.reddit.com/user/trapexit
- discord: https://discord.gg/MpAr69V
Support development
This software is free to use and released under a very liberal license. That said if you like this software and would like to support its development donations are welcome.
- PayPal: https://paypal.me/trapexit
- GitHub Sponsors: https://github.com/sponsors/trapexit
- Patreon: https://www.patreon.com/trapexit
- SubscribeStar: https://www.subscribestar.com/trapexit
- Ko-Fi: https://ko-fi.com/trapexit
- Bitcoin (BTC): 1DfoUd2m5WCxJAMvcFuvDpT4DR2gWX2PWb
- Bitcoin Cash (BCH): qrf257j0l09yxty4kur8dk2uma8p5vntdcpks72l8z
- Ethereum (ETH): 0xb486C0270fF75872Fc51d85879b9c15C380E66CA
- Litecoin (LTC): LW1rvHRPWtm2NUEMhJpP4DjHZY1FaJ1WYs
- Basic Attention Token (BAT): 0xE651d4900B4C305284Da43E2e182e9abE149A87A
- Zcash (ZEC): t1ZwTgmbQF23DJrzqbAmw8kXWvU2xUkkhTt
- Zcoin (XZC): a8L5Vz35KdCQe7Y7urK2pcCGau7JsqZ5Gw