rclone/docs/content/commands/rclone_mount.md

date	title	slug	url
2020-02-10T14:59:49Z	rclone mount	rclone_mount	/commands/rclone_mount/

rclone mount

Mount the remote as file system on a mountpoint.

Synopsis

rclone mount allows Linux, FreeBSD, macOS and Windows to
mount any of Rclone's cloud storage systems as a file system with
FUSE.

First set up your remote using rclone config. Check it works with rclone ls etc.

Start the mount like this

rclone mount remote:path/to/files /path/to/local/mount

Or on Windows like this where X: is an unused drive letter

rclone mount remote:path/to/files X:

When the program ends, either via Ctrl+C or receiving a SIGINT or SIGTERM signal,
the mount is automatically stopped.

The umount operation can fail, for example when the mountpoint is busy.
When that happens, it is the user's responsibility to stop the mount manually with

# Linux
fusermount -u /path/to/local/mount
# OS X
umount /path/to/local/mount

Installing on Windows

To run rclone mount on Windows, you will need to
download and install WinFsp.

WinFsp is an open source
Windows File System Proxy which makes it easy to write user space file
systems for Windows. It provides a FUSE emulation layer which rclone
uses combination with
cgofuse. Both of these
packages are by Bill Zissimopoulos who was very helpful during the
implementation of rclone mount for Windows.

Windows caveats

Note that drives created as Administrator are not visible by other
accounts (including the account that was elevated as
Administrator). So if you start a Windows drive from an Administrative
Command Prompt and then try to access the same drive from Explorer
(which does not run as Administrator), you will not be able to see the
new drive.

The easiest way around this is to start the drive from a normal
command prompt. It is also possible to start a drive from the SYSTEM
account (using the WinFsp.Launcher
infrastructure)
which creates drives accessible for everyone on the system or
alternatively using the nssm service manager.

Mount as a network drive

By default, rclone will mount the remote as a normal drive. However,
you can also mount it as a Network Drive (or Network Share, as
mentioned in some places)

Unlike other systems, Windows provides a different filesystem type for
network drives. Windows and other programs treat the network drives
and fixed/removable drives differently: In network drives, many I/O
operations are optimized, as the high latency and low reliability
(compared to a normal drive) of a network is expected.

Although many people prefer network shares to be mounted as normal
system drives, this might cause some issues, such as programs not
working as expected or freezes and errors while operating with the
mounted remote in Windows Explorer. If you experience any of those,
consider mounting rclone remotes as network shares, as Windows expects
normal drives to be fast and reliable, while cloud storage is far from
that. See also Limitations section below for more
info

Add "--fuse-flag --VolumePrefix=\server\share" to your "mount"
command, replacing "share" with any other name of your choice if you
are mounting more than one remote. Otherwise, the mountpoints will
conflict and your mounted filesystems will overlap.

Read more about drive mapping

Limitations

Without the use of "--vfs-cache-mode" this can only write files
sequentially, it can only seek when reading. This means that many
applications won't work with their files on an rclone mount without
"--vfs-cache-mode writes" or "--vfs-cache-mode full". See the File
Caching section for more info.

The bucket based remotes (eg Swift, S3, Google Compute Storage, B2,
Hubic) do not support the concept of empty directories, so empty
directories will have a tendency to disappear once they fall out of
the directory cache.

Only supported on Linux, FreeBSD, OS X and Windows at the moment.

rclone mount vs rclone sync/copy

File systems expect things to be 100% reliable, whereas cloud storage
systems are a long way from 100% reliable. The rclone sync/copy
commands cope with this with lots of retries. However rclone mount
can't use retries in the same way without making local copies of the
uploads. Look at the file caching
for solutions to make mount more reliable.

Attribute caching

You can use the flag --attr-timeout to set the time the kernel caches
the attributes (size, modification time etc) for directory entries.

The default is "1s" which caches files just long enough to avoid
too many callbacks to rclone from the kernel.

In theory 0s should be the correct value for filesystems which can
change outside the control of the kernel. However this causes quite a
few problems such as
rclone using too much memory,
rclone not serving files to samba
and excessive time listing directories.

The kernel can cache the info about a file for the time given by
"--attr-timeout". You may see corruption if the remote file changes
length during this window. It will show up as either a truncated file
or a file with garbage on the end. With "--attr-timeout 1s" this is
very unlikely but not impossible. The higher you set "--attr-timeout"
the more likely it is. The default setting of "1s" is the lowest
setting which mitigates the problems above.

If you set it higher ('10s' or '1m' say) then the kernel will call
back to rclone less often making it more efficient, however there is
more chance of the corruption issue above.

If files don't change on the remote outside of the control of rclone
then there is no chance of corruption.

This is the same as setting the attr_timeout option in mount.fuse.

Filters

Note that all the rclone filters can be used to select a subset of the
files to be visible in the mount.

systemd

When running rclone mount as a systemd service, it is possible
to use Type=notify. In this case the service will enter the started state
after the mountpoint has been successfully set up.
Units having the rclone mount service specified as a requirement
will see all files and folders immediately in this mode.

chunked reading

--vfs-read-chunk-size will enable reading the source objects in parts.
This can reduce the used download quota for some remotes by requesting only chunks
from the remote that are actually read at the cost of an increased number of requests.

When --vfs-read-chunk-size-limit is also specified and greater than --vfs-read-chunk-size,
the chunk size for each open file will get doubled for each chunk read, until the
specified value is reached. A value of -1 will disable the limit and the chunk size will
grow indefinitely.

With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the following
parts will be downloaded: 0-100M, 100M-200M, 200M-300M, 300M-400M and so on.
When --vfs-read-chunk-size-limit 500M is specified, the result would be
0-100M, 100M-300M, 300M-700M, 700M-1200M, 1200M-1700M and so on.

Chunked reading will only work with --vfs-cache-mode < full, as the file will always
be copied to the vfs cache before opening with --vfs-cache-mode full.

Directory Cache

Using the --dir-cache-time flag, you can set how long a
directory should be considered up to date and not refreshed from the
backend. Changes made locally in the mount may appear immediately or
invalidate the cache. However, changes done on the remote will only
be picked up once the cache expires if the backend configured does not
support polling for changes. If the backend supports polling, changes
will be picked up on within the polling interval.

Alternatively, you can send a SIGHUP signal to rclone for
it to flush all directory caches, regardless of how old they are.
Assuming only one rclone instance is running, you can reset the cache
like this:

kill -SIGHUP $(pidof rclone)

If you configure rclone with a remote control then you can use
rclone rc to flush the whole directory cache:

rclone rc vfs/forget

Or individual files or directories:

rclone rc vfs/forget file=path/to/file dir=path/to/dir

File Buffering

The --buffer-size flag determines the amount of memory,
that will be used to buffer data in advance.

Each open file descriptor will try to keep the specified amount of
data in memory at all times. The buffered data is bound to one file
descriptor and won't be shared between multiple open file descriptors
of the same file.

This flag is a upper limit for the used memory per file descriptor.
The buffer will only use memory for data that is downloaded but not
not yet read. If the buffer is empty, only a small amount of memory
will be used.
The maximum memory used by rclone for buffering can be up to
--buffer-size * open files.

File Caching

These flags control the VFS file caching options. The VFS layer is
used by rclone mount to make a cloud storage system work more like a
normal file system.

You'll need to enable VFS caching if you want, for example, to read
and write simultaneously to a file. See below for more details.

Note that the VFS cache works in addition to the cache backend and you
may find that you need one or the other or both.

--cache-dir string                   Directory rclone will use for caching.
--vfs-cache-max-age duration         Max age of objects in the cache. (default 1h0m0s)
--vfs-cache-mode string              Cache mode off|minimal|writes|full (default "off")
--vfs-cache-poll-interval duration   Interval to poll the cache for stale objects. (default 1m0s)
--vfs-cache-max-size int             Max total size of objects in the cache. (default off)

If run with -vv rclone will print the location of the file cache. The
files are stored in the user cache file area which is OS dependent but
can be controlled with --cache-dir or setting the appropriate
environment variable.

The cache has 4 different modes selected by --vfs-cache-mode.
The higher the cache mode the more compatible rclone becomes at the
cost of using disk space.

Note that files are written back to the remote only when they are
closed so if rclone is quit or dies with open files then these won't
get written back to the remote. However they will still be in the on
disk cache.

If using --vfs-cache-max-size note that the cache may exceed this size
for two reasons. Firstly because it is only checked every
--vfs-cache-poll-interval. Secondly because open files cannot be
evicted from the cache.

--vfs-cache-mode off

In this mode the cache will read directly from the remote and write
directly to the remote without caching anything on disk.

This will mean some operations are not possible

• Files can't be opened for both read AND write
• Files opened for write can't be seeked
• Existing files opened for write must have O_TRUNC set
• Files open for read with O_TRUNC will be opened write only
• Files open for write only will behave as if O_TRUNC was supplied
• Open modes O_APPEND, O_TRUNC are ignored
• If an upload fails it can't be retried

--vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disks. This means that files opened for
write will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

• Files opened for write only can't be seeked
• Existing files opened for write must have O_TRUNC set
• Files opened for write only will ignore O_APPEND, O_TRUNC
• If an upload fails it can't be retried

--vfs-cache-mode writes

In this mode files opened for read only are still read directly from
the remote, write only and read/write files are buffered to disk
first.

This mode should support all normal file system operations.

If an upload fails it will be retried up to --low-level-retries times.

--vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
a file is opened for read it will be downloaded in its entirety first.

This may be appropriate for your needs, or you may prefer to look at
the cache backend which does a much more sophisticated job of caching,
including caching directory hierarchies and chunks of files.

In this mode, unlike the others, when a file is written to the disk,
it will be kept on the disk after it is written to the remote. It
will be purged on a schedule according to --vfs-cache-max-age.

This mode should support all normal file system operations.

If an upload or download fails it will be retried up to
--low-level-retries times.

Case Sensitivity

Linux file systems are case-sensitive: two files can differ only
by case, and the exact case must be used when opening a file.

Windows is not like most other operating systems supported by rclone.
File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case used
to create the file is preserved and available for programs to query.
It is not allowed for two files in the same directory to differ only by case.

Usually file systems on MacOS are case-insensitive. It is possible to make MacOS
file systems case-sensitive but that is not the default

The "--vfs-case-insensitive" mount flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the mounted
file system as is. If the flag is "true" (or appears without a value on
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on mounted file system. If an argument refers
to an existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the same
name is not found but a name differing only by case exists, rclone will
transparently fixup the name. This fixup happens only when an existing file
is requested. Case sensitivity of file names created anew by rclone is
controlled by an underlying mounted file system.

Note that case sensitivity of the operating system running rclone (the target)
may differ from case sensitivity of a file system mounted by rclone (the source).
The flag controls whether "fixup" is performed to satisfy the target.

If the flag is not provided on command line, then its default value depends
on the operating system where rclone runs: "true" on Windows and MacOS, "false"
otherwise. If the flag is provided without a value, then it is "true".

rclone mount remote:path /path/to/mountpoint [flags]

Options

      --allow-non-empty                        Allow mounting over a non-empty directory.
      --allow-other                            Allow access to other users.
      --allow-root                             Allow access to root user.
      --attr-timeout duration                  Time for which file/directory attributes are cached. (default 1s)
      --daemon                                 Run mount as a daemon (background mode).
      --daemon-timeout duration                Time limit for rclone to respond to kernel (not supported by all OSes).
      --debug-fuse                             Debug the FUSE internals - needs -v.
      --default-permissions                    Makes kernel enforce access control based on the file mode.
      --dir-cache-time duration                Time to cache directory entries for. (default 5m0s)
      --dir-perms FileMode                     Directory permissions (default 0777)
      --file-perms FileMode                    File permissions (default 0666)
      --fuse-flag stringArray                  Flags or arguments to be passed direct to libfuse/WinFsp. Repeat if required.
      --gid uint32                             Override the gid field set by the filesystem. (default 1000)
  -h, --help                                   help for mount
      --max-read-ahead SizeSuffix              The number of bytes that can be prefetched for sequential reads. (default 128k)
      --no-checksum                            Don't compare checksums on up/download.
      --no-modtime                             Don't read/write the modification time (can speed things up).
      --no-seek                                Don't allow seeking in files.
  -o, --option stringArray                     Option for libfuse/WinFsp. Repeat if required.
      --poll-interval duration                 Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s)
      --read-only                              Mount read-only.
      --uid uint32                             Override the uid field set by the filesystem. (default 1000)
      --umask int                              Override the permission bits set by the filesystem.
      --vfs-cache-max-age duration             Max age of objects in the cache. (default 1h0m0s)
      --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache. (default off)
      --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
      --vfs-cache-poll-interval duration       Interval to poll the cache for stale objects. (default 1m0s)
      --vfs-case-insensitive                   If a file name not found, find a case insensitive match.
      --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks. (default 128M)
      --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. 'off' is unlimited. (default off)
      --volname string                         Set the volume name (not supported by all OSes).
      --write-back-cache                       Makes kernel buffer writes before sending them to rclone. Without this, writethrough caching is used.

See the global flags page for global options not listed here.

SEE ALSO

• rclone - Show help for rclone commands, flags and backends.