462 lines
12 KiB
C
462 lines
12 KiB
C
//#include "ls1c103.h"
|
|
#include "ls1x.h"
|
|
#include "ls1x_gpio.h"
|
|
#include "test.h"
|
|
#include "ls1x_gpio.h"
|
|
#include "ls1c103_map.h"
|
|
#include "ls1c103_tim.h"
|
|
#include "ls1c103_dcm_tim.h"
|
|
#include "Config.h"
|
|
|
|
static int err;
|
|
|
|
|
|
volatile int Encoder_Overflow_Count = 0;
|
|
|
|
static dcm_motor_dir_t direction; // dir
|
|
static uint16_t dutyfactor; // speed
|
|
|
|
extern INT8U x_getchar(void);
|
|
extern unsigned int str2num(unsigned char *);
|
|
static uint8_t scan_key(uint32_t key){
|
|
uint16_t keyuse;
|
|
if(key == KEY1){
|
|
keyuse = GPIO_Pin_13;
|
|
}
|
|
else{
|
|
keyuse = GPIO_Pin_12;
|
|
}
|
|
uint8_t sflag = GPIO_ReadInputDataBit(GPIOA, keyuse);
|
|
if(sflag==0){
|
|
while(sflag==0){
|
|
sflag = GPIO_ReadInputDataBit(GPIOA, keyuse);
|
|
}
|
|
return 1;
|
|
}
|
|
else{
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void GPIO_Configuration(void)
|
|
{
|
|
AFIO_RemapConfig(AFIOA, GPIO_Pin_12 | GPIO_Pin_13, GPIO_FUNC_GPIO);
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13;
|
|
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
|
|
}
|
|
|
|
static void GPIO_Configuration_DCM(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
AFIO_RemapConfig(AFIOA, GPIO_Pin_0 | GPIO_Pin_2 | GPIO_Pin_4, GPIO_FUNC_MAIN);
|
|
AFIO_RemapConfig(AFIOA, GPIO_Pin_13, GPIO_FUNC_SECOND);
|
|
/* GPIOA Configuration: Channel 1, 2, 3 and 4 as alternate function push-pull */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_2 | GPIO_Pin_4 | GPIO_Pin_13;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
}
|
|
|
|
static void GPIO_Configuration_ENCODER(void)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
AFIO_RemapConfig(AFIOA, GPIO_Pin_7 | GPIO_Pin_8, GPIO_FUNC_MAIN);
|
|
/* GPIOA Configuration: Channel 1, 2, 3 and 4 as alternate function push-pull */
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7 | GPIO_Pin_8;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
}
|
|
|
|
static void TIM_DCM_CONFIG(){
|
|
uint32_t tmpcr1;
|
|
uint32_t tmpccmrx;
|
|
uint32_t tmpccer;
|
|
uint32_t tmpcr2;
|
|
|
|
tmpcr1 = DCM_TIM->CR1;
|
|
tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
|
|
tmpcr1 |= TIM_CounterMode_Up;
|
|
tmpcr1 &= ~TIM_CR1_CKD;
|
|
tmpcr1 |= (uint32_t)TIM_CKD_DIV1;
|
|
tmpcr1 |= (uint32_t)TIM_CR1_ARPE;
|
|
DCM_TIM->CR1 = tmpcr1;
|
|
/* Set the Autoreload value */
|
|
DCM_TIM->ARR = (uint32_t)DCM_PERIOD_COUNT - 1;
|
|
/* Set the Prescaler value */
|
|
DCM_TIM->PSC = DCM_PRESCALER_COUNT - 1;
|
|
DCM_TIM->RCR = 0;
|
|
DCM_TIM->EGR = TIM_EGR_UG;
|
|
|
|
|
|
DCM_TIM->CCER &= ~TIM_CCER_CC1E;
|
|
/* Get the TIMx CCER register value */
|
|
tmpccer = DCM_TIM->CCER;
|
|
/* Get the TIMx CR2 register value */
|
|
tmpcr2 = DCM_TIM->CR2;
|
|
/* Get the TIMx CCMR1 register value */
|
|
tmpccmrx = DCM_TIM->CCMR1;
|
|
/* Reset the Output Compare Mode Bits */
|
|
tmpccmrx &= ~TIM_CCMR1_OC1M;
|
|
tmpccmrx &= ~TIM_CCMR1_CC1S;
|
|
/* Select the Output Compare Mode */
|
|
tmpccmrx |= TIM_OCMode_PWM1;
|
|
/* Reset the Output Polarity level */
|
|
tmpccer &= ~TIM_CCER_CC1P;
|
|
/* Set the Output Compare Polarity */
|
|
tmpccer |= TIM_OCPolarity_High;
|
|
/* Reset the Output Compare IDLE State */
|
|
tmpcr2 &= ~TIM_CR2_OIS1;
|
|
/* Set the Output Idle state */
|
|
tmpcr2 |= TIM_OCIdleState_Reset;
|
|
/* Write to TIMx CR2 */
|
|
DCM_TIM->CR2 = tmpcr2;
|
|
/* Write to TIMx CCMR1 */
|
|
DCM_TIM->CCMR1 = tmpccmrx;
|
|
/* Set the Capture Compare Register value */
|
|
DCM_TIM->CCR1 = 0;
|
|
/* Write to TIMx CCER */
|
|
DCM_TIM->CCER = tmpccer;
|
|
DCM_TIM->CCMR1 |= TIM_CCMR1_OC1PE;
|
|
|
|
|
|
DCM_TIM->CCER &= ~TIM_CCER_CC2E;
|
|
/* Get the TIMx CCER register value */
|
|
tmpccer = DCM_TIM->CCER;
|
|
/* Get the TIMx CR2 register value */
|
|
tmpcr2 = DCM_TIM->CR2;
|
|
/* Get the TIMx CCMR1 register value */
|
|
tmpccmrx = DCM_TIM->CCMR1;
|
|
/* Reset the Output Compare Mode Bits */
|
|
tmpccmrx &= ~TIM_CCMR1_OC2M;
|
|
tmpccmrx &= ~TIM_CCMR1_CC2S;
|
|
/* Select the Output Compare Mode */
|
|
tmpccmrx |= (TIM_OCMode_PWM1 << 8);
|
|
/* Reset the Output Polarity level */
|
|
tmpccer &= ~TIM_CCER_CC2P;
|
|
/* Set the Output Compare Polarity */
|
|
tmpccer |= (TIM_OCPolarity_High << 4);
|
|
/* Reset the Output Compare IDLE State */
|
|
tmpcr2 &= ~TIM_CR2_OIS2;
|
|
/* Set the Output Idle state */
|
|
tmpcr2 |= (TIM_OCIdleState_Reset << 2);
|
|
/* Write to TIMx CR2 */
|
|
DCM_TIM->CR2 = tmpcr2;
|
|
/* Write to TIMx CCMR1 */
|
|
DCM_TIM->CCMR1 = tmpccmrx;
|
|
/* Set the Capture Compare Register value */
|
|
DCM_TIM->CCR2 = 0;
|
|
/* Write to TIMx CCER */
|
|
DCM_TIM->CCER = tmpccer;
|
|
DCM_TIM->CCMR1 |= TIM_CCMR1_OC2PE;
|
|
|
|
|
|
DCM_TIM->CCER &= ~TIM_CCER_CC3E;
|
|
/* Get the TIMx CCER register value */
|
|
tmpccer = DCM_TIM->CCER;
|
|
/* Get the TIMx CR2 register value */
|
|
tmpcr2 = DCM_TIM->CR2;
|
|
/* Get the TIMx CCMR1 register value */
|
|
tmpccmrx = DCM_TIM->CCMR2;
|
|
/* Reset the Output Compare Mode Bits */
|
|
tmpccmrx &= ~TIM_CCMR2_OC3M;
|
|
tmpccmrx &= ~TIM_CCMR2_CC3S;
|
|
/* Select the Output Compare Mode */
|
|
tmpccmrx |= TIM_OCMode_PWM1;
|
|
/* Reset the Output Polarity level */
|
|
tmpccer &= ~TIM_CCER_CC3P;
|
|
/* Set the Output Compare Polarity */
|
|
tmpccer |= (TIM_OCPolarity_High << 8);
|
|
/* Reset the Output Compare IDLE State */
|
|
tmpcr2 &= ~TIM_CR2_OIS3;
|
|
/* Set the Output Idle state */
|
|
tmpcr2 |= (TIM_OCIdleState_Reset << 4);
|
|
/* Write to TIMx CR2 */
|
|
DCM_TIM->CR2 = tmpcr2;
|
|
/* Write to TIMx CCMR1 */
|
|
DCM_TIM->CCMR2 = tmpccmrx;
|
|
/* Set the Capture Compare Register value */
|
|
DCM_TIM->CCR3 = 0;
|
|
/* Write to TIMx CCER */
|
|
DCM_TIM->CCER = tmpccer;
|
|
DCM_TIM->CCMR2 |= TIM_CCMR2_OC3PE;
|
|
|
|
|
|
DCM_TIM->CCER &= ~TIM_CCER_CC4E;
|
|
/* Get the TIMx CCER register value */
|
|
tmpccer = DCM_TIM->CCER;
|
|
/* Get the TIMx CR2 register value */
|
|
tmpcr2 = DCM_TIM->CR2;
|
|
/* Get the TIMx CCMR1 register value */
|
|
tmpccmrx = DCM_TIM->CCMR2;
|
|
/* Reset the Output Compare Mode Bits */
|
|
tmpccmrx &= ~TIM_CCMR2_OC4M;
|
|
tmpccmrx &= ~TIM_CCMR2_CC4S;
|
|
/* Select the Output Compare Mode */
|
|
tmpccmrx |= (TIM_OCMode_PWM1 << 8);
|
|
/* Reset the Output Polarity level */
|
|
tmpccer &= ~TIM_CCER_CC4P;
|
|
/* Set the Output Compare Polarity */
|
|
tmpccer |= (TIM_OCPolarity_High << 12);
|
|
/* Reset the Output Compare IDLE State */
|
|
tmpcr2 &= ~TIM_CR2_OIS4;
|
|
/* Set the Output Idle state */
|
|
tmpcr2 |= (TIM_OCIdleState_Reset << 8);
|
|
/* Write to TIMx CR2 */
|
|
DCM_TIM->CR2 = tmpcr2;
|
|
/* Write to TIMx CCMR1 */
|
|
DCM_TIM->CCMR2 = tmpccmrx;
|
|
/* Set the Capture Compare Register value */
|
|
DCM_TIM->CCR4 = 0;
|
|
/* Write to TIMx CCER */
|
|
DCM_TIM->CCER = tmpccer;
|
|
DCM_TIM->CCMR2 |= TIM_CCMR2_OC4PE;
|
|
|
|
DCM_TIM->CCER |= (uint32_t)(TIM_CCER_CC1E);
|
|
DCM_TIM->CCER |= (uint32_t)(TIM_CCER_CC2E);
|
|
DCM_TIM->CCER |= (uint32_t)(TIM_CCER_CC3E);
|
|
DCM_TIM->CCER |= (uint32_t)(TIM_CCER_CC4E);
|
|
}
|
|
|
|
static void TIM_ENCODER_CONFIG(void)
|
|
{
|
|
uint32_t tmpcr1;
|
|
uint32_t tmpsmcr;
|
|
uint32_t tmpccmr1;
|
|
uint32_t tmpccer;
|
|
|
|
ENCODER_TIM->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE);
|
|
/* Configure the Time base in the Encoder Mode */
|
|
tmpcr1 = ENCODER_TIM->CR1;
|
|
tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
|
|
tmpcr1 |= TIM_CounterMode_Up;
|
|
tmpcr1 &= ~TIM_CR1_CKD;
|
|
tmpcr1 |= (uint32_t)TIM_CKD_DIV1;
|
|
ENCODER_TIM->CR1 = tmpcr1;
|
|
/* Set the Autoreload value */
|
|
ENCODER_TIM->ARR = (uint32_t)ENCODER_TIM_PERIOD - 1 ;
|
|
/* Set the Prescaler value */
|
|
ENCODER_TIM->PSC = ENCODER_TIM_PRESCALER;
|
|
ENCODER_TIM->RCR = 0;
|
|
ENCODER_TIM->EGR = TIM_EGR_UG;
|
|
|
|
/* Get the TIMx SMCR register value */
|
|
tmpsmcr = ENCODER_TIM->SMCR;
|
|
/* Get the TIMx CCMR1 register value */
|
|
tmpccmr1 = ENCODER_TIM->CCMR1;
|
|
/* Get the TIMx CCER register value */
|
|
tmpccer = ENCODER_TIM->CCER;
|
|
/* Set the encoder Mode */
|
|
tmpsmcr |= TIM_EncoderMode_TI12;
|
|
/* Select the Capture Compare 1 and the Capture Compare 2 as input */
|
|
tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
|
|
tmpccmr1 |= (TIM_ICSelection_DirectTI | (TIM_ICSelection_DirectTI << 8U));
|
|
/* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
|
|
tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
|
|
tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
|
|
tmpccmr1 |= TIM_ICPSC_DIV1 | (TIM_ICPSC_DIV1 << 8U);
|
|
tmpccmr1 |= (0 << 4U) | (0 << 12U);
|
|
/* Set the TI1 and the TI2 Polarities */
|
|
tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
|
|
tmpccer |= TIM_ICPolarity_Rising | (TIM_ICPolarity_Rising << 4U);
|
|
/* Write to TIMx SMCR */
|
|
ENCODER_TIM->SMCR = tmpsmcr;
|
|
/* Write to TIMx CCMR1 */
|
|
ENCODER_TIM->CCMR1 = tmpccmr1;
|
|
/* Write to TIMx CCER */
|
|
ENCODER_TIM->CCER = tmpccer;
|
|
|
|
|
|
ENCODER_TIM->CNT = 0;
|
|
|
|
|
|
ENCODER_TIM->SR = ~(TIM_IT_Update);
|
|
ENCODER_TIM->DIER |= (TIM_IT_Update);
|
|
ENCODER_TIM->CR1|= TIM_CR1_URS;
|
|
|
|
/* Reset the CCxE Bit */
|
|
ENCODER_TIM->CCER &= ~TIM_CCER_CC1E;
|
|
/* Set or reset the CCxE Bit */
|
|
ENCODER_TIM->CCER |= TIM_CCER_CC1E; /* 0x1FU = 31 bits max shift */
|
|
/* Reset the CCxE Bit */
|
|
ENCODER_TIM->CCER &= ~TIM_CCER_CC2E;
|
|
/* Set or reset the CCxE Bit */
|
|
ENCODER_TIM->CCER |= TIM_CCER_CC2E; /* 0x1FU = 31 bits max shift */
|
|
ENCODER_TIM->CR1 |= (TIM_CR1_CEN);
|
|
|
|
}
|
|
|
|
static void set_motor_speed(void)
|
|
{
|
|
|
|
if (direction == DCM_MOTOR_FWD)
|
|
{
|
|
DCM_TIM->CCR2 = 0;
|
|
DCM_TIM->CCR1 = dutyfactor;
|
|
}
|
|
else
|
|
{
|
|
DCM_TIM->CCR1 = 0;
|
|
DCM_TIM->CCR2 = dutyfactor;
|
|
}
|
|
}
|
|
|
|
extern void irq_motor_init(int index);
|
|
static int tim_dcm_enc_test(void)
|
|
{
|
|
|
|
volatile int ChannelPulse = 0;
|
|
int i = 0;
|
|
direction = DCM_MOTOR_FWD; // dir
|
|
dutyfactor = 0;
|
|
|
|
printf("\n\rDCM ENC TEST\n\r");
|
|
|
|
GPIO_Configuration();
|
|
GPIO_Configuration_DCM();
|
|
GPIO_Configuration_ENCODER();
|
|
TIM_DCM_CONFIG();
|
|
TIM_ENCODER_CONFIG();
|
|
dcm_mode = DCM_ENC;
|
|
Encoder_Overflow_Count = 0;
|
|
irq_motor_init(0);
|
|
|
|
while(1){
|
|
if(scan_key(KEY0)){
|
|
printf("start\n\r");
|
|
DCM_TIM->BDTR|=(TIM_BDTR_MOE);
|
|
DCM_TIM->CR1|=TIM_CR1_CEN;
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int tim_dcm_enc(int argc, void *argv[])
|
|
{
|
|
tim_dcm_enc_test();
|
|
return 0;
|
|
}
|
|
|
|
|
|
int enc_speed_set(int argc, void *argv[])
|
|
{
|
|
if (argc != 3)
|
|
{
|
|
printf("\n usage: speed set <dir:0/1> <speed:0-900>\n");
|
|
return 1;
|
|
}
|
|
|
|
uint32_t dir = str2num(argv[1]);
|
|
uint32_t speed = str2num(argv[2]);
|
|
|
|
if(dcm_mode != DCM_ENC){
|
|
printf("\n\rNOT IN ENC MOTOR MODE!\n\r");
|
|
return 0;
|
|
}
|
|
|
|
if(speed > 900){
|
|
speed = 900;
|
|
}
|
|
else if(speed < 0){
|
|
speed = 0;
|
|
}
|
|
|
|
if(dir == 0){
|
|
direction = DCM_MOTOR_FWD;
|
|
}
|
|
else{
|
|
direction = DCM_MOTOR_REV;
|
|
}
|
|
|
|
dutyfactor = speed;
|
|
|
|
if (direction == DCM_MOTOR_FWD)
|
|
{
|
|
DCM_TIM->CCR2 = 0; DCM_TIM->CCR1 = dutyfactor;
|
|
}
|
|
else
|
|
{
|
|
DCM_TIM->CCR1 = 0; DCM_TIM->CCR2 = dutyfactor;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int enc_speed_keyset(int argc, void *argv[])
|
|
{
|
|
volatile int ChannelPulse = 0;
|
|
int i = 0;
|
|
direction = DCM_MOTOR_FWD; // dir
|
|
dutyfactor = 0;
|
|
|
|
if(dcm_mode != DCM_ENC){
|
|
printf("\n\rNOT IN ENC MOTOR MODE!\n\r");
|
|
return 0;
|
|
}
|
|
|
|
while(1){
|
|
if(scan_key(KEY0)){
|
|
ChannelPulse += 20;
|
|
if(ChannelPulse > 900){
|
|
ChannelPulse = 900;
|
|
}
|
|
if(ChannelPulse >= 0){
|
|
dutyfactor = ChannelPulse;
|
|
direction = DCM_MOTOR_FWD;
|
|
}
|
|
else{
|
|
dutyfactor = -ChannelPulse;
|
|
direction = DCM_MOTOR_REV;
|
|
}
|
|
set_motor_speed();
|
|
}
|
|
else if (scan_key(KEY1)){
|
|
ChannelPulse -= 20;
|
|
if(ChannelPulse < -900){
|
|
ChannelPulse = -900;
|
|
}
|
|
if(ChannelPulse >= 0){
|
|
dutyfactor = ChannelPulse;
|
|
direction = DCM_MOTOR_FWD;
|
|
}
|
|
else{
|
|
dutyfactor = -ChannelPulse;
|
|
direction = DCM_MOTOR_REV;
|
|
}
|
|
set_motor_speed();
|
|
}
|
|
|
|
char c;
|
|
c = x_getchar();
|
|
if (c == 0x3) break;
|
|
i++;
|
|
if(i==100000){
|
|
i = 0;
|
|
printf(".");
|
|
}
|
|
}
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
int show_local(){
|
|
int mylocal;
|
|
int decimal;
|
|
mylocal = Encoder_Overflow_Count;
|
|
//decimal = (int)((float)ENCODER_TIM->CNT/ENCODER_TIM_PERIOD*100.0)%100;
|
|
decimal = (int)(ENCODER_TIM->CNT/ENCODER_TIM_PERIOD*100)%100;
|
|
printf("\n\rNow loc:%d.%d\n\r",mylocal,decimal);
|
|
}
|
|
|
|
|