e338648fed introduced multiple upstream
addresses. A comment notes that mixing schemes isn't supported and
therefore the first valid scheme is supposed to be used.
Fixes setting the first scheme.
fixes#5087
* caddyhttp: Honor grace period in background
This avoids blocking during config reloads.
* Don't quit process until servers shut down
* Make tests more likely to pass on fast CI (#5045)
* caddyhttp: Even faster shutdowns
Simultaneously shut down all HTTP servers, rather than one at a time.
In practice there usually won't be more than 1 that lingers. But this
code ensures that they all Shutdown() in their own goroutine
and then we wait for them at the end (if exiting).
We also wait for them to start up so we can be fairly confident the
shutdowns have begun; i.e. old servers no longer
accepting new connections.
* Fix comment typo
* Pull functions out of loop, for readability
Ideally I'd just remove the parameter to caddy.Context.Logger(), but
this would break most Caddy plugins.
Instead, I'm making it variadic and marking it as partially deprecated.
In the future, I might completely remove the parameter once most
plugins have updated.
* fix encode handler header manipulation
also avoid implementing ReadFrom because it breaks when io.Copied to directly
* strconv.Itoa should be tried as a last resort
WriteHeader during Close
* feat: Multiple 'to' upstreams in reverse-proxy cmd
* Repeat --to for multiple upstreams, rather than comma-separating in a single flag
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Explicitly disallow multiple regexp matchers
Fix#5028
Since the matchers would overwrite eachother, we should error out to tell the user their config doesn't make sense.
* Update modules/caddyhttp/matchers.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Doing so allows for splice/sendfile optimizations when available.
Fixes#4731
Co-authored-by: flga <flga@users.noreply.github.com>
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* fileserver: Support glob expansion in file matcher
* Fix tests
* Fix bugs and tests
* Attempt Windows fix, sigh
* debug Windows, WIP
* Continue debugging Windows
* Another attempt at Windows
* Plz Windows
* Cmon...
* Clean up, hope I didn't break anything
* caddyhttp: Support sending HTTP 103 Early Hints
This adds support for early hints in the static_response handler.
* caddyhttp: Don't record 1xx responses
* reverseproxy: Close hijacked conns on reload/quit
We also send a Close control message to both ends of
WebSocket connections. I have tested this many times in
my dev environment with consistent success, although
the variety of scenarios was limited.
* Oops... actually call Close() this time
* CloseMessage --> closeMessage
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Use httpguts, duh
* Use map instead of sync.Map
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* core: Refactor listeners; use SO_REUSEPORT on Unix
Just an experiment for now
* Fix lint by logging error
* TCP Keepalive configuration (#4865)
* initial attempt at TCP Keepalive configuration
* core: implement tcp-keepalive for linux
* move canSetKeepAlive interface
* Godoc for keepalive server parameter
* handle return values
* log keepalive errors
* Clean up after bad merge
* Merge in pluggable network types
From 1edc1a45e3
* Slight refactor, fix from recent merge conflict
Co-authored-by: Karmanyaah Malhotra <karmanyaah.gh@malhotra.cc>
* break up code and use lazy reading and pool bufio.Writer
* close underlying connection when operation failed
* allocate bufWriter and streamWriter only once
* refactor record writing
* rebase from master
* handle err
* Fix type assertion
Also reduce some duplication
* Refactor client and clientCloser for logging
Should reduce allocations
* Minor cosmetic adjustments; apply Apache license
* Appease the linter
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* added the httpError function into the document
* Update templates.go
* Update templates.go
* Fix gofmt
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Until now, the vars matcher has unintentionally lacked parity with the
map directive: the destination placeholders of the map directive would
be expressed as placeholders, i.e. {foo}. But the vars matcher would
not use { }: vars foo value
This looked weird, and was confusing, since it implied that the key
could be dynamic, which doesn't seem helpful here.
I think this is a proper bug fix, since we're not used to accessing
placeholders literally without { } in the Caddyfile.
* core: Plugins can register listener networks
This can be useful for custom listeners.
This feature/API is experimental and may change!
* caddyhttp: Expose server listeners
This allows users to, for example, get upstreams from multiple SRV
endpoints in order (such as primary and secondary clusters).
Also, gofmt went to town on the comments, sigh
* fileserver: Support virtual file systems (close#3720)
This change replaces the hard-coded use of os.Open() and os.Stat() with
the use of the new (Go 1.16) io/fs APIs, enabling virtual file systems.
It introduces a new module namespace, caddy.fs, for such file systems.
Also improve documentation for the file server. I realized it was one of
the first modules written for Caddy 2, and the docs hadn't really been
updated since!
* Virtualize FS for file matcher; minor tweaks
* Fix tests and rename dirFS -> osFS
(Since we do not use a root directory, it is dynamic.)
Hahaha this is the ultimate "I have no idea what I'm doing" commit but it
compiles and the tests pass and I declare victory!
... probably broke something, should be tested more.
It is nice that the protobuf dependency becomes indirect now.
* reverseproxy: Implement retry count, alternative to try_duration
* Add Caddyfile support for `retry_match`
* Refactor to deduplicate matcher parsing logic
* Fix lint
See https://caddy.community/t/using-forward-auth-and-writing-my-own-authenticator-in-php/16410, apparently it didn't work when `copy_headers` wasn't used. This is because we were skipping adding a handler to the routes in the "good response handler", but this causes the logic in `reverseproxy.go` to ignore the response handler since it's empty. Instead, we can just always put in the `header` handler, even with an empty `Set` operation, it's just a no-op, but it fixes that condition in the proxy code.
* Make reverse proxy TLS server name replaceable for SNI upstreams.
* Reverted previous TLS server name replacement, and implemented thread safe version.
* Move TLS servername replacement into it's own function
* Moved SNI servername replacement into httptransport.
* Solve issue when dynamic upstreams use wrong protocol upstream.
* Revert previous commit.
Old commit was: Solve issue when dynamic upstreams use wrong protocol upstream.
Id: 3c9806ccb6
* Added SkipTLSPorts option to http transport.
* Fix typo in test config file.
* Rename config option as suggested by Matt
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Update code to match renamed config option.
* Fix typo in config option name.
* Fix another typo that I missed.
* Tests not completing because of apparent wrong ordering of options.
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Make reverse proxy TLS server name replaceable for SNI upstreams.
* Reverted previous TLS server name replacement, and implemented thread safe version.
* Move TLS servername replacement into it's own function
* Moved SNI servername replacement into httptransport.
* Solve issue when dynamic upstreams use wrong protocol upstream.
* Revert previous commit.
Old commit was: Solve issue when dynamic upstreams use wrong protocol upstream.
Id: 3c9806ccb6
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
In v2.5.0, upstream health was fixed such that whether an upstream is
considered healthy or not is mostly up to each individual handler's
config. Since "healthy" is an opinion, it is not a global value.
I unintentionally left in the "healthy" field in the API endpoint for
checking upstreams, and it is now misleading (see #4792).
However, num_requests and fails remains, so health can be determined by
the API client, rather than having it be opaquely (and unhelpfully)
determined for the client.
If we do restore this value later on, it'd need to be replicated once
per reverse_proxy handler according to their individual configs.
* reverseproxy: Improve hashing LB policies with HRW
Previously, if a list of upstreams changed, hash-based LB policies
would be greatly affected because the hash relied on the position of
upstreams in the pool. Highest Random Weight or "rendezvous" hashing
is apparently robust to pool changes. It runs in O(n) instead of
O(log n), but n is very small usually.
* Fix bug and update tests
* reverseproxy: Sync up `handleUpgradeResponse` with stdlib
I had left this as a TODO for when we bump to minimum 1.17, but I should've realized it was under `internal` so it couldn't be used directly.
Copied the functions we needed for parity. Hopefully this is ok!
* Add tests and fix godoc comments
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
Includes several breaking changes; code base updated accordingly.
- Added lots of context arguments
- Use fs.ErrNotExist
- Rename ACMEManager -> ACMEIssuer; CertificateManager -> Manager
* caddyfile: Support for raw token values, improve `map`, `expression`
* Applied code review comments
* Rename RawVal to ValRaw
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: New `copy_response` handler for `handle_response` routes
Followup to #4298 and #4388.
This adds a new `copy_response` handler which may only be used in `reverse_proxy`'s `handle_response` routes, which can be used to actually copy the proxy response downstream.
Previously, if `handle_response` was used (with routes, not the status code mode), it was impossible to use the upstream's response body at all, because we would always close the body, expecting the routes to write a new body from scratch.
To implement this, I had to refactor `h.reverseProxy()` to move all the code that came after the `HandleResponse` loop into a new function. This new function `h.finalizeResponse()` takes care of preparing the response by removing extra headers, dealing with trailers, then copying the headers and body downstream.
Since basically what we want `copy_response` to do is invoke `h.finalizeResponse()` at a configurable point in time, we need to pass down the proxy handler, the response, and some other state via a new `req.WithContext(ctx)`. Wrapping a new context is pretty much the only way we have to jump a few layers in the HTTP middleware chain and let a handler pick up this information. Feels a bit dirty, but it works.
Also fixed a bug with the `http.reverse_proxy.upstream.duration` placeholder, it always had the same duration as `http.reverse_proxy.upstream.latency`, but the former was meant to be the time taken for the roundtrip _plus_ copying/writing the response.
* Delete the "Content-Length" header if we aren't copying
Fixes a bug where the Content-Length will mismatch the actual bytes written if we skipped copying the response, so we get a message like this when using curl:
```
curl: (18) transfer closed with 18 bytes remaining to read
```
To replicate:
```
{
admin off
debug
}
:8881 {
reverse_proxy 127.0.0.1:8882 {
@200 status 200
handle_response @200 {
header Foo bar
}
}
}
:8882 {
header Content-Type application/json
respond `{"hello": "world"}` 200
}
```
* Implement `copy_response_headers`, with include/exclude list support
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* opentelemetry: create a new module
* fix imports
* fix test
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/tracer.go
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* rename error ErrUnsupportedTracesProtocol
* replace spaces with tabs in the test data
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* replace spaces with tabs in the README.md
* use default values for a propagation and exporter protocol
* set http attributes with helper
* simplify code
* Cleanup modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update link in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update documentation in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update link to naming spec in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename module from opentelemetry to tracing
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename span_name to span
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename span_name to span
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Simplify otel resource creation
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* handle extra attributes
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.opentelemetry.io/otel/semconv to 1.7.0
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.opentelemetry.io/otel version
* remove environment variable handling
* always use tracecontext,baggage as propagators
* extract tracer name into variable
* rename OpenTelemetry to Tracing
* simplify resource creation
* update go.mod
* rename package from opentelemetry to tracing
* cleanup tests
* update Caddyfile example in README.md
* update README.md
* fix test
* fix module name in README.md
* fix module name in README.md
* change names in README.md and tests
* order imports
* remove redundant tests
* Update documentation README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Fix grammar
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update comments
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update comments
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.sum
* update go.sum
* Add otelhttp instrumentation, update OpenTelemetry libraries.
* Use otelhttp instrumentation for instrumenting HTTP requests.
This change uses context.WithValue to inject the next handler into the
request context via a "nextCall" carrier struct, and pass it on to a
standard Go HTTP handler returned by otelhttp.NewHandler. The
underlying handler will extract the next handler from the context,
call it and pass the returned error to the carrier struct.
* use zap.Error() for the error log
* remove README.md
* update dependencies
* clean up the code
* change comment
* move serveHTTP method from separate file
* add syntax to the UnmarshalCaddyfile comment
* go import the file
* admin: Write proper status on invalid requests (#4569) (fix#4561)
* update dependencies
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Vibhav Pant <vibhavp@gmail.com>
Co-authored-by: Alok Naushad <alokme123@gmail.com>
Co-authored-by: Cedric Ziel <cedric@cedric-ziel.com>
* reverseproxy: Begin refactor to enable dynamic upstreams
Streamed here: https://www.youtube.com/watch?v=hj7yzXb11jU
* Implement SRV and A/AAA upstream sources
Also get upstreams at every retry loop iteration instead of just once
before the loop. See #4442.
* Minor tweaks from review
* Limit size of upstreams caches
* Add doc notes deprecating LookupSRV
* Provision dynamic upstreams
Still WIP, preparing to preserve health checker functionality
* Rejigger health checks
Move active health check results into handler-specific Upstreams.
Improve documentation regarding health checks and upstreams.
* Deprecation notice
* Add Caddyfile support, use `caddy.Duration`
* Interface guards
* Implement custom resolvers, add resolvers to http transport Caddyfile
* SRV: fix Caddyfile `name` inline arg, remove proto condition
* Use pointer receiver
* Add debug logs
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* reverseproxy: Make shallow-ish clone of the request
* Refactor request cloning into separate function
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
If .ts.net domains are explicitly added to config,
don't try to manage a cert for them (it will fail, and our
implicit Tailscale module will
get those certs at run-time).
* Update matchers.go
* Update matchers.go
* implementation of zone_id handling
* last changes in zone handling
* give return true values instead of bool
* Apply suggestions from code review
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* changes as suggested
* Apply suggestions from code review
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Update matchers.go
* shortened the Match function
* changed mazcher handling
* Update matchers.go
* delete space
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Huge thank-you to Tailscale (https://tailscale.com) for making this change possible!
This is a great feature for Caddy and Tailscale is a great fit for a standard implementation.
* caddytls: GetCertificate modules; Tailscale
* Caddyfile support for get_certificate
Also fix AP provisioning in case of empty subject list (persist loaded
module on struct, much like Issuers, to surive reprovisioning).
And implement start of HTTP cert getter, still WIP.
* Update modules/caddytls/automation.go
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Use tsclient package, check status for name
* Implement HTTP cert getter
And use reuse CertMagic's PEM functions for private keys.
* Remove cache option from Tailscale getter
Tailscale does its own caching and we don't need the added complexity...
for now, at least.
* Several updates
- Option to disable cert automation in auto HTTPS
- Support multiple cert managers
- Remove cache feature from cert manager modules
- Minor improvements to auto HTTPS logging
* Run go mod tidy
* Try to get certificates from Tailscale implicitly
Only for domains ending in .ts.net.
I think this is really cool!
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
