This handles a few edge cases which are extremely rare (due to the UI layout), but still technically possible:
- Ensure users are authenticated before attempting association.
- Add a message and logic for when a user already has an association for a given auth provider.
This reverts a part of changes introduced by https://github.com/discourse/discourse/pull/13947
In that PR I:
1. Disallowed topic feature links for TL-0 users
2. Additionally, disallowed just putting any URL in topic titles for TL-0 users
Actually, we don't need the second part. It introduced unnecessary complexity for no good reason. In fact, it tries to do the job that anti-spam plugins (like Akismet plugin) should be doing.
This PR reverts this second change.
This adds an optional ENV variable, `EMBER_CLI_PROD_ASSETS`. If truthy,
compiling production assets will be done via Ember CLI and will replace
the assets Rails would otherwise use.
This disallows putting URLs in topic titles for TL0 users, which means that:
If a TL-0 user puts a link into the title, a topic featured link won't be generated (as if it was disabled in the site settings)
Server methods for creating and updating topics will be refusing featured links when they are called by TL-0 users
TL-0 users won't be able to put any link into the topic title. For example, the title "Hey, take a look at https://my-site.com" will be rejected.
Also, it improves a bit server behavior when creating or updating feature links on topics in the categories with disabled featured links. Before the server just silently ignored a featured link field that was passed to him, now it will be returning 422 response.
Discourse automatically sends a private message after backup or
restore finished. The private message used to contain the log inline
even when it was very long. A very long log can create issues because
the length of the post will be over the maximum allowed length of a
post. When that happens, Discourse will try to create an upload with
the logs. If that fails, it will trim the log and inline it.
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
This commit adds the number of drafts a user has next to the "Draft"
label in the user preferences menu and activity tab. The count is
updated via MessageBus when a draft is created or destroyed.
* Copy remove_member to new `leave` method
* Remove unneeded code from the leave method
* Rearrange the leave method
* Remove unneeded code from the remove_member method
* Add tests
* Implement on the client side
Using an invalid value was allowed. This commit tries to automatically
fix the color by adding missing # symbol or will show an error to the
user if it is not possible and it is not a CSS color either.
* Copy the add_members method to the new join method
* Remove unneeded code from the join method
* Rearrange the join method
* Remove unneeded stuff from the add_members method
* Extract add_user_to_group method
* Implement of the client side
* Tests
* Doesn't inline users.uniq
* Return promise from join.then()
* Remove unnecessary begin and end
* Revert "Return promise from join.then()"
This reverts commit bda84d8d
* Remove variable already_in_group
When configured, all topics in the category inherits the slow mode
duration from the category's default.
Note that currently there is no way to remove the slow mode from the
topics once it has been set.
When the Forever option is selected for suspending a user, the user is suspended for 1000 years. Without customizing the site’s text, this time period is displayed to the user in the suspension email that is sent to the user, and if the user attempts to log back into the site. Telling someone that they have been suspended for 1000 years seems likely to come across as a bad attempt at humour.
This PR special case messages when a user suspended or silenced forever.
We now use the group's full name in group SMTP emails, so we are dropping the via #{site_name}. If group owners still want this they can just change the full name of the group.
Configuring staged users to watch categories and tags is a way to sign
them up to get many emails. These emails may be unwanted and get marked
as spam, hurting the site's email deliverability.
Users can opt-in to email notifications by logging on to their
account and configuring their own preferences.
If staff need to be able to configure these preferences on behalf of
staged users, the "allow changing staged user tracking" site setting
can be enabled. Default is to not allow it.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Flips content_security_policy_frame_ancestors default to enabled, and
removes HTTP_REFERER checks on embed requests, as the new referer
privacy options made the check fragile.
* FIX: Clear stale status of reloaded reviewables
Navigating away from and back to the reviewables reloaded Reviewable
records, but did not clear the "stale" attribute.
* FEATURE: Show user who last acted on reviewable
When a user acts on a reviewable, all other clients are notified and a
generic "reviewable was resolved by someone" notice was shown instead of
the buttons. There is no need to keep secret the username of the acting
user.
We are trying to not use "private message" in the interface, in favor of "personal message", because of course admins can read all messages so they are not really private unless encrypted messaging is turned on..
Currently when bulk-awarding a badge that can be granted multiple times, users in the CSV file are granted the badge once no matter how many times they're listed in the file and only if they don't have the badge already.
This PR adds a new option to the Badge Bulk Award feature so that it's possible to grant users a badge even if they already have the badge and as many times as they appear in the CSV file.
This PR adds the first use of Uppy in our codebase, hidden behind a enable_experimental_image_uploader site setting. When the setting is enabled only the user card background uploader will use the new uppy-image-uploader component added in this PR.
I've introduced an UppyUpload mixin that has feature parity with the existing Upload mixin, and improves it slightly to deal with multiple/single file distinctions and validations better. For now, this just supports the XHRUpload plugin for uppy, which keeps our existing POST to /uploads.json.
* FEATURE: add penalty history when silencing a user
Display penalty history (last 6 months) when silencing/suspending a user
* FEATURE: allow default penalty values to be chosen
Adds a site setting that designates default penalty values in hours.
Silence/suspend modals will auto-fill in the default values, but otherwise
will still allow moderators to pick and overwrite values as normal.
First silence/suspend: first value
Second silence/suspend: second value
etc.
Penalty counts are forgiven at the same rate as tl3 promotion requirements do.
Co-authored-by: jjaffeux <j.jaffeux@gmail.com>
User flair was given by user's primary group. This PR separates the
two, adds a new field to the user model for flair group ID and users
can select their flair from user preferences now.
Take 2 of https://github.com/discourse/discourse/pull/13466.
Fixes a few issues with the original PR:
- color definition stylesheet target now includes the theme id, to avoid themes set to use the default color scheme loading the same stylesheet
- changes the internal cache key for color definition stylesheet to reset the pre-existing cache
And also move all the "top topics by period" routes to query string param.
/top/monthly => /top?period=monthly
/c/:slug/:id/l/top/monthly => /c/:slug/:id/l/top?period=monthly
/tag/:slug/l/top/daily => /tag/:slug/l/top?period=daily (new)
Users can invite people to topics from secured category, but they will
not be redirected to the topic after signing up unless they have the
permissions to view the topic. This commit shows a warning when invite
is saved if the topic is in a secured category and none of the invite
groups are allowed to see it.
Skip group SMTP email (and add log) if:
* topic is deleted
* post is deleted
* smtp has been disabled for the group
Skip without log if:
* enable_smtp site setting is false
* disable_emails site setting is yes
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This PR changes the order of the topic timer options
into a more logical order when the topic is open/closed.
Also, we are now hiding the "Schedule Publishing" option
if the topic is not a private message or in a private category.
It does not make sense to schedule publishing to a different
category for a public topic.
We want to remove completely our custom modal for uploading files in composer and directly trigger the system file picker.
This PR makes it happen. The fix is pretty simple since we already weren't using our custom modal on mobile. We just need to start using the same hidden <input type="file"> that we already use on mobile.
It seems to be pretty tricky to test opening a system modal so I haven't added new tests. We already have other tests for file uploading though. We directly trigger jquery-File-Upload plugin hooks in those tests - 3dda926cb2/app/assets/javascripts/discourse/tests/acceptance/composer-attachment-test.js (L89).
We changed (https://github.com/discourse/discourse/pull/13407) behaviour of the topic level bookmark button recently. That PR made the button be opening the edit bookmark modal when there is only one bookmark on the topic instead of just removing that bookmark as it was before.
This PR fixes the next problems that weren't taken into account in the previous PR:
1. Everything should work fine even on very big topics when a bookmarked post is unloaded from the post stream. I've added code that loads the post we need and makes everything work as expected
2. When at least one bookmark on the topic has a reminder, we should always be showing the icon with a clock on the topic level bookmark button
3. We should show correct tooltips for the topic level bookmark button
This PR makes several changes to the group SMTP email contents to make it look more like a support inbox message.
* Remove the context posts, they only add clutter to the email and replies
* Display email addresses of staged users instead of odd generated usernames
* Add a "please reply above this line" message to sent emails
There is a big difference between regular watched words and regular
expressions and this has been confusing in the past. This notice adds
an explanation.
This commit also reorganizes the code of the test modal.
* FEATURE: Staff can receive pending user reminders more frequently.
We now express the "pending_users_reminder_delay" in minutes instead of hours so staff can have finer control over the delay.
We need to keep in mind that the reminders could still take up to 20 minutes, even when using a lower value. We send them from a scheduled job.
* Migrate to a new site setting for the reminders delay
Limit was 5 with the assumption that trust level badge
will be the 6th badge. With trust level badges disabled,
it should be possible to increase this to 6, or even more imo.
Add Members could also invite new users via emails, but that was a less
known fact. Splitting the previous modal into two more accessible
modals should make this feature more discoverable.
This was previously broken by 59ef48c0b9 (#11425, #11424).
Centralize the logic into the exception controller, which avoids the problematic bug and makes it easy to add additional detailed 404 pages in the future.
Before this change, calling `StyleSheet::Manager.stylesheet_details`
for the first time resulted in multiple queries to the database. This is
because the code was modelled in a way where each `Theme` was loaded
from the database one at a time.
This PR restructures the code such that it allows us to load all the
theme records in a single query. It also allows us to eager load the
required associations upfront. In order to achieve this, I removed the
support of loading multiple themes per request. It was initially added
to support user selectable theme components but the feature was never
completed and abandoned because it wasn't a feature that we thought was
worth building.
We already reject email replies to public topics via `SiteSetting.disallow_reply_by_email_after_days` and raising the `OldDestinationError`. This PR introduces similar behaviour for group inboxes, but without the rejection, and **only when SMTP is enabled for the group**.
If a reply is sent via email and the post is older than `SiteSetting.disallow_reply_by_email_after_days` days ago, then we create a new topic instead of making a reply in the old one and link back to the original topic. This is done to prevent long running group inbox discussions.
If you click on a bookmark in the post stream you get an Edit Bookmark modal. This does not happen if you click the topic bookmark button.
We want to open the Edit modal too if there is only one bookmark on a topic (it doesn't matter on the first post or not). The other behaviour if there are > 1 bookmarks in the topic is to prompt the user to confirm delete of all the bookmarks in the topic. This behaviour will stay as-is.
I have done some refactoring in this PR, and still, there is a place for improvement. For example, we don't call post.deleteBookmark() method when deleting several bookmarks. I just don't want to refactor too much in one PR.
Adds the last updated at and by SMTP/IMAP fields to the UI, we were already storing them in the DB. Also makes sure that `imap_mailbox_name` being changed makes the last_updated_at/by field update for IMAP.
Subclasses must call #delete_user_actions inside build_actions to support user deletion. The method adds a delete user bundle, which has a delete and a delete + block option. Every subclass is responsible for implementing these actions.
There are 2 changes in this PR:
1) Add a new environment variable called `DISCOURSE_SKIP_CSS_WATCHER` to disable our stylesheet watcher, and make the `qunit:test` rake task set this variable on the Unicorn/Rails server it spins up to disable our stylesheet watcher when running the tests because it doesn't really need it.
2) Print more Chrome logs (such as network/security errors) to the console.
Next Week should mean next Monday, Next Month - the first day of the next month, and so on.
Also, we'll be using the name "Next Monday" instead of "Next Week" because it's easier to understand. No one can get confused by next Monday.
The `ember_jquery` bundle contains production builds of Ember and jQuery
which doesn't work with tests. This commits introduces a new
`theme_qunit_vendor` bundle which is copy of the `vendor` bundle but
doesn't contain `ember_jquery`.
This commit is a partial revert of
409c8585e4
Over the years we have found that a few communities never discovered tags.
Instead of having them default off we now have them default on, ensuring
that everyone finds out about them.
Co-authored-by: Dan Ungureanu <dan@ungureanu.me>
It was not clear that replace watched words can be used to replace text
with URLs. This introduces a new watched word type that makes it easier
to understand.
Refactors `TrustLevel` and moves translations from server to client
Additional changes:
* "staff" and "admin" wasn't translatable in site settings
* it replaces a concatenated string with a translation
* uses translation for trust levels in users_by_trust_level report
* adds a DB migration to rename keys of translation overrides affected by this commit
In Ember CLI, the vendor bundler includes Ember/jQuery, so this brings
our app closer to that configuration.
We have a couple pages (Reset Password / Confirm New Email) where we need
`ember_jquery` without vendor so the file still exists for those cases.
When a topic is fully merged into another topic we close it. Now we want also to set a timer for deleting this topic. By default, stub topics will be deleted in 7 days. Users can change this period or disable auto-deleting by setting the period to 0.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
Using 1 as the default value is confusing for some people as low-score flags are hidden unless staff uses the "(any)" priority filter. Let's change it to 0 and let every site adjust the setting to match their needs.
There are two methods which the server uses to verify an invite is being redeemed with a matching email:
1) The email token, supplied via a `?t=` parameter
2) The validity of the email, as provided by the auth provider
Only one of these needs to be true for the invite to be redeemed successfully on the server. The frontend logic was previously only checking (2). This commit updates the frontend logic to match the server.
This commit does not affect the invite redemption logic. It only affects the 'show' endpoint, and the UI.
The previous commits removed reviewables leading to a bad user
experience. This commit updates the status, replaces actions with a
message and greys out the reviewable.
This PR improves the UI of bulk select so that its context is applied to the Dismiss Unread and Dismiss New buttons. Regular users (not just staff) are now able to use topic bulk selection on the /new and /unread routes to perform these dismiss actions more selectively.
For Dismiss Unread, there is a new count in the text of the button and in the modal when one or more topic is selected with the bulk select checkboxes.
For Dismiss New, there is a count in the button text, and we have added functionality to the server side to accept an array of topic ids to dismiss new for, instead of always having to dismiss all new, the same as the bulk dismiss unread functionality. To clean things up, the `DismissTopics` service has been rolled into the `TopicsBulkAction` service.
We now also show the top Dismiss/Dismiss New button based on whether the bottom one is in the viewport, not just based on the topic count.
Re-lands the change initially proposed on #8359 but without a new nginx
location block, so it has less change surface.
Co-authored-by: Jeff Wong <awole20@gmail.com>
Co-authored-by: Jeff Wong <awole20@gmail.com>
Code fences:
1. allow to have syntax highlighting by declaring a language
2. are easier to edit (the composer doesn't preserve indentation when inserting a new line)
3. are more popular
When slow mode is enabled it's possible to open the slow mode dialog again to disable it or to update slow mode settings. The problem is that in this case, the button for saving still has the label "Enable" which is confusing.
This changes the text on the button from "Enable" to "Update" when slow mode is already enabled.
Based on feedback from Matt Haughey, we don't need to use so many words when describing a deleted topic or post.
Co-authored-by: Martin Brennan <martin@discourse.org>
When editing the first post for the topic we do two AJAX requests
to two separate controllers in this order:
PUT /t/topic-name
PUT /posts/2489523
This causes two post revisor calls, which end up triggering the
:post_edited DiscourseEvent twice. This is then picked up and sent
as a WebHook event twice. However we do not need to send a :post_edited
webhook event if the first post is being edited and topic_changed is
true from the :post_edited DiscourseEvent, because a second event will
shortly come through for just the post.
See https://meta.discourse.org/t/post-webhook-fires-two-times-on-post-edited-for-first-post-in-a-topic/162408
Continued on from https://github.com/discourse/discourse/pull/10590
It used to allow adding email addresses to a group even if invites were
disabled for the site. This does not allow user to input email address
if they cannot invite.
The second thing this commit improves is the message that is displayed
to the user when they hit the invite rate limit.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
Too long excerpts don't make sense. They would make UI wonky. We already have a constraint for the `topic_excerpt_maxlength` setting. This adds the same constraint to `post_excerpt_maxlength`.
It also changes the max value of `topic_excerpt_maxlength` from 999 to 1000.
The auto restart logic was sending a USR2 to the parent process without checking what the parent process actually was. In some situations, it might not be the `bin/unicorn` supervisor.
This commit switches to use a global variable for the supervisor PID. This will be much less prone to unexpected behavior.
* DEV: Allow wildcards in Oneboxer optional domain Site Settings
Allows a wildcard to be used as a subdomain on Oneboxer-related SiteSettings, e.g.:
- `force_get_hosts`
- `cache_onebox_response_body_domains`
- `force_custom_user_agent_hosts`
* DEV: fix typos
* FIX: Try doing a GET after receiving a 500 error from a HEAD
By default we try to do a `HEAD` requests. If this results in a 500 error response, we should try to do a `GET`
* DEV: `force_get_hosts` should be a hidden setting
* DEV: Oneboxer Strategies
Have an alternative oneboxing ‘strategy’ (i.e., set of options) to use when an attempt to generate a Onebox fails. Keep track of any non-default strategies that were used on a particular host, and use that strategy for that host in the future.
Initially, the alternate strategy (`force_get_and_ua`) forces the FinalDestination step of Oneboxing to do a `GET` rather than `HEAD`, and forces a custom user agent.
* DEV: change stubbed return code
The stubbed status code needs to be a value not recognized by FinalDestination
We have a few places in the code where we need to validate various email related settings, and will have another soon with the improved group email settings UI. This PR introduces a class which can validate POP3, IMAP, and SMTP credentials and also provide a friendly error message for issues if they must be presented to an end user.
This PR does not change any existing code to use the new service. I have added a TODO to change POP3 validation and the email test rake task to use the new validator post-release.
* FIX: Ensure the same email cannot be invited twice
When creating a new invite with a duplicated email, the old invite will
be updated and returned. When updating an invite with a duplicated email
address, an error will be returned.
* FIX: not Ember helper does not exist
* FIX: Sync can_invite_to_forum? and can_invite_to?
The two methods should perform the same basic set of checks, such as
check must_approve_users site setting.
Ideally, one of the methods would call the other one or be merged and
that will happen in the future.
* FIX: Show invite to group if user is group owner
This commit adds a listener on (almost) all `.rb` files in the repository. When a change occurs, it checks whether Zeitwerk is responsible for autoloading it. If not, a warning will be printed to the console and the server will be automatically restarted. Optionally, you can pass the `AUTO_RESTART=0` environment variable to prevent auto-restart.
Currently, when the target is not available we're returning the error message "`You are not permitted to view the requested resource`" which is not clear.
The user may have changed their category or tag tracking settings since a topic was tracked/watched based on those settings in the past. In that case we need to alter the reason message we show them otherwise it is very confusing for the end user to be told they are tracking a topic because of a category, when they are no longer tracking that category.
For example: "You will see a count of new replies because you are tracking this category." becomes: "You will see a count of new replies because you were tracking this category in the past."
To do this, it was necessary to add tag and category tracking info to current user serializer. I improved the serializer code so it only does 3 SQL queries instead of 9 to get the tracking information for tags and categories for the current user.
* FEATURE: add support for like webhooks
Add support for like webhooks. Webhook events only send on user membership
in the defined webhook group filters.
This also fixes group webhook events, as before this was never used, and
the logic was not correct.
This commit makes a few changes to improve boot time in development environments. It will have no effect on production boot times.
- Skip the SchemaCache warmup. In development mode, the SchemaCache is refreshed every time there is a code change, so warmup is of limited use.
- Skip warming up PrettyText. This adds ~2s to each web worker's boot time. The vast majority of requests do not use PrettyText, so it is more efficient to defer its warmup until it's needed
- Skip the intentional 1 second pause during Unicorn worker forking. The comment (which also exists in Unicorn's documentation) suggests this works around a Unix signal handling bug, but I haven't been able to locate any more information. Skipping it in dev will significantly speed up boot. If we start to see issues, we can revert this change.
On my machine, this improves `/bin/unicorn` boot time from >10s to ~4s
In development we regularly restart/reload Rails, which wipes out the schema cache. This then has to be regenerated using DDL queries on the database.
Instead, we can make use of the `rake db:schema:cache:dump` command. This will dump the schema cache to a YAML file, and then load it when needed. This is significantly faster than rebuilding the cache from DDL queries every time.
On every request, Rails checks to see whether any ruby code has been changed on the filesystem. The default FileUpdateChecker does this by iterating over every file on the autoload_paths and comparing its modified-time.
In Discourse, our autoload path of `/app` includes the `/app/assets` directory, and therefore thousands of non-ruby files (e.g. node_modules). This makes the `Dir["/app"]` call very slow (>100ms in my case). On my machine, every Rails-handled request spends around 150-200ms in the FileUpdateChecker. This commit introduces a couple of changes to completely eliminate this wasted time:
- The `/app/assets` directory is excluded from the file watchers. For me, this cut the time spent in the file_watcher to around 50-100ms
- Switches our development config to use the `EventedFileUpdateChecker`, which makes use of the `listen` gem to subscribe to os-specific notifications of changes. This completely removes the `FileUpdateChecker` from the critical path
On my machine, topic_list requests now return in around 80ms (previously >200ms). Live code reload still works as it did before
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
This setting allows admin to de/activate automatic trimming of incoming email.
There are instances where it does wonders in trimming all the garbage content and other
instances where it's so bad that it trims the most important part of the email.
FIX: don't remove hidden content using the style attribute when converting HTML to Markdown.
The regexp used was doing more harm than good. It was way too broad.
FIX: properly elide signatures from emails sent with Front App.
This is fairly safe as Front App nicely identifies signatures in the HTML part.
If the "use_site_small_logo_as_system_avatar" setting is enabled, the site's small logo is displayed as the selected option by the avatar-selector. Choosing a different avatar disables the setting.
When the admin creates a new custom field they can specify if that field should be searchable or not.
That setting is taken into consideration for quick search results.
Adds a webhook to notify when a reviewable score is updated.
This is different from created or status changed as additional flags can
roll in and update the score without updating status. Useful for applications
looking to integrate in with Discourse's scores
This commit allows site admins to run theme tests in production via a new `/theme-qunit` route. When you visit `/theme-qunit`, you'll see a list of the themes/components installed on your site that have tests, and from there you can select a theme or component that you run its tests.
We also have a new rake task `themes:install_and_test` that can be used to install a list of themes/components on a temporary database and run the tests of the themes/components that are installed. This rake task can be useful when upgrading/deploying a Discourse instance to make sure that the installed themes/components are compatible with the new Discourse version being deployed, and if the tests fail you can abort the build/deploy process so you don't end up with a broken site.
This filter hides reviewables with a score lower than the "reviewable_low_priority_threshold" setting. We only use reviewables that already met this threshold to calculate the Medium and High priority filters.
The old share modal used to host both share and invite functionality,
under two tabs. The new "Share Topic" modal can be used only for
sharing, but has a link to the invite modal.
Among the sharing methods, there is also "Notify" which points out
that existing users will simply be notified (this was not clear
before). Staff members can notify as many users as they want, but
regular users are restricted to one at a time, no more than
max_topic_invitations_per_day. The user will not receive another
notification if they have been notified of the same topic in past hour.
The "Create Invite" modal also suffered some changes: the two radio
boxes for selecting the type (invite or email) have been replaced by a
single checkbox (is email?) and then the two labels about emails have
been replaced by a single one, some fields were reordered and the
advanced options toggle was moved to the bottom right of the modal.
Not all videos can be rendered everywhere because some browser may be
missing some codecs. This commit adds a notice on top of video to let
the user know about it.
The "last custom date and time" shortcut for the topic timer and
bookmarks could get into a state where it had an Invalid Date if
the user opened the topic timer modal, clicked Custom Date and then
closed the modal without making changes. This has been fixed, the
last custom date + time will no longer be set in this case and if
somehow the last custom date + time is invalid that option will not
show.
Also improve the wording from just "Last" to "Last custom datetime"
It's important that we don't perform pg_dumps against databases
running behind pgbouncer.
We had an old monkey-patch to prevent this, but following some [recent
internal rails refactoring](5488686851),
the patch no longer works. Instead, we can use the official
`config.active_record.dump_schema_after_migration` option.
Setting this to false in production is recommended by Rails, and is the
default for newly generated Rails applications.
Previously watched words ignored topic titles when applying auto tagging rules.
Also copy has been improved to reflect how the system behaves.
The text hints that we are only watching first post now
* FEATURE: Review every post using the review queue.
If the `review_every_post` setting is enabled, posts created and edited by regular uses are sent to the review queue so staff can review them. We'll skip PMs and posts created or edited by TL4 or staff users.
Staff can choose to:
- Approve the post (nothing happens)
- Approve and restore the post (if deleted)
- Approve and unhide the post (if hidden)
- Reject and delete it
- Reject and keep deleted (if deleted)
- Reject and suspend the user
- Reject and silence the user
* Update config/locales/server.en.yml
Co-authored-by: Robin Ward <robin.ward@gmail.com>
Co-authored-by: Robin Ward <robin.ward@gmail.com>
* soften language around daily limits and add daily
let's try to be as gentle as we can with new users
* better copy suggestion from Blake
* further copyedit improvements
There is a category setting that enforces 1 or more tags must be added to a topic from a specific tag group before creating it. This validation was not being run before the topic was being sent to a review queue for categories that have that setting enabled.
There was an existing validation in `TopicCreator` but it was not correct; it was only validating when the tags did _not_ exist and also only happened on `create`. I now run the validation in `TopicCreator.valid?`
I also improved the error message shown to the user when they have not added the tags required (showing the tag names from the tag group), and changed the composer tag selector to not show "optional" if there are N tags required from a certain group.
The server used to respond with a generic 'error, contact admin' message
which did not offer any hint what the error was. This happened even when
the error could be easily corrected by the user (for example, if they
chose a very common password).
This PR adds a new category setting which is a column in the `categories` table, `allow_unlimited_owner_edits_on_first_post`.
What this does is:
* Inside the `can_edit_post?` method of `PostGuardian`, if the current user editing a post is the owner of the post, it is the first post, and the topic's category has `allow_unlimited_owner_edits_on_first_post`, then we bypass the check for `LimitedEdit#edit_time_limit_expired?` on that post.
* Also, similar to wiki topics, in `PostActionNotifier#after_create_post_revision` we send a notification to all users watching a topic when the OP is edited in a topic with the category setting `allow_unlimited_owner_edits_on_first_post` enabled.
This is useful for forums where there is a Marketplace or similar category, where topics are created and then updated indefinitely by the OP rather than the OP making new topics or additional replies. In a way this acts similar to a wiki that only one person can edit.
* Fixes the z-index of the prompt so it is behind the quick access panels
* Adds a dismiss `X` button (made sure the click target of this was quite big)
* Change structure of HTML to address template lint issues
* Fix aria-hidden not returning true/false
* Reload current page instead of navigating to / when clicking on the prompt message
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to how Discourse processes JavaScript that comes with themes/components, and these refactors may break your JS customizations; see https://meta.discourse.org/t/upcoming-core-changes-that-may-break-some-themes-components-april-12/186252?u=osama for details on how you can check if your themes/components are affected and what you need to do to fix them.
This commit also improves theme error handling in Discourse. We will now be able to catch errors that occur when theme initializers are run and prevent them from breaking the site and other themes/components.
We introduced a cap on the number of bookmarks the user can add in be145ccf2f. However this has caused unintended side effects; when the `jobs/scheduled/bookmark_reminder_notifications.rb` runs we get this error for users who already had more bookmarks than the limit:
> Job exception: Validation failed: Sorry, you have too many bookmarks, visit #{url}/my/activity/bookmarks to remove some.
This is because the `clear_reminder!` call was triggering a bookmark validation, which raised an error because the user already had to many, holding up other reminders.
This PR also adds `max_bookmarks_per_user` hidden site setting (default 2000). This replaces the BOOKMARK_LIMIT const so we can raise it for certain sites.
To add an extra layer of security, we sanitize settings before shipping them to the client. We don't sanitize those that have the "html" type.
The CookedPostProcessor already uses Loofah for sanitization, so I chose to also use it for this. I added it to our gemfile since we installed it as a transitive dependency.
This commit allows themes and theme components to have QUnit tests. To add tests to your theme/component, create a top-level directory in your theme and name it `test`, and Discourse will save all the files in that directory (and its sub-directories) as "tests files" in the database. While tests files/directories are not required to be organized in a specific way, we recommend that you follow Discourse core's tests [structure](https://github.com/discourse/discourse/tree/master/app/assets/javascripts/discourse/tests).
Writing theme tests should be identical to writing plugins or core tests; all the `import` statements and APIs that you see in core (or plugins) to define/setup tests should just work in themes.
You do need a working Discourse install to run theme tests, and you have 2 ways to run theme tests:
* In the browser at the `/qunit` route. `/qunit` will run tests of all active themes/components as well as core and plugins. The `/qunit` now accepts a `theme_name` or `theme_url` params that you can use to run tests of a specific theme/component like so: `/qunit?theme_name=<your_theme_name>`.
* In the command line using the `themes:qunit` rake task. This take is meant to run tests of a single theme/component so you need to provide it with a theme name or URL like so: `bundle exec rake themes:qunit[name=<theme_name>]` or `bundle exec rake themes:qunit[url=<theme_url>]`.
There are some refactors to internal code that's responsible for processing themes/components in Discourse, most notably:
* `<script type="text/discourse-plugin">` tags are automatically converted to modules.
* The `theme-settings` service is removed in favor of a simple `lib` file responsible for managing theme settings. This was done to allow us to register/lookup theme settings very early in our Ember app lifecycle and because there was no reason for it to be an Ember service.
These refactors should 100% backward compatible and invisible to theme developers.
This moves the "This site was just updated" modal asking the user if they want to refresh into a subtle prompt that slides down from the header.
Also in this PR I've added a helper to publish message bus messages in JS tests. So instead of this:
```javascript
// Mimic a messagebus message
MessageBus.callbacks
.filterBy("channel", "/global/asset-version")
.map((c) => c.func("somenewversion"));
```
We can have:
```javascript
publishToMessageBus("/global/asset-version", "somenewversion");
```
In Improve invite system, a newly created link only invite cannot
be retrieved via API with the invitee's email once created. A new
route, /invites/retrieve, is introduced to fetch an already
created invite by email address.
This feature used to be controlled by two site settings
enable_personal_email_messages and min_trust_to_send_email_messages.
I removed enable_personal_email_messages and unhide
min_trust_to_send_email_messages to simplify the process of
enabling / disabling this feature.
Changing the invite type from link to email and then copying it was
confusing because it gave user the impression that the invite was
updated and the invite link will reflect the latest changes, but it
did not.
If the user has not been sent any messages, show a message in the quick access menu with an educational message. If the user can send private messages, also show a link to open the "new message" composer:
This also adds a general improvement to the quick-access-panel, to be able to show an `emptyStateWidget` instead of just a message if there is nothing to show in the panel, as well as initial general styles for empty state.
* FEATURE: Cache successful HTTP GET requests during Oneboxing
Some oneboxes may fail if when making excessive and/or odd requests against the target domains. This change provides a simple mechanism to cache the results of succesful GET requests as part of the oneboxing process, with the goal of reducing repeated requests and ultimately improving the rate of successful oneboxing.
To enable:
Set `SiteSetting.cache_onebox_response_body` to `true`
Add the domains you’re interesting in caching to `SiteSetting. cache_onebox_response_body_domains` e.g. `example.com|example.org|example.net`
Optionally set `SiteSetting.cache_onebox_user_agent` to a user agent string of your choice to use when making requests against domains in the above list.
* FIX: Swap order of duration and value in redis call
The correct order for `setex` arguments is `key`, `duration`, and `value`.
Duration and value had been flipped, however the code would not have thrown an error because we were caching the value of `1.day.to_i` for a period of 1 seconds… The intention appears to be to set a value of 1 (purely as a flag) for a period of 1 day.
