complete -C'echo $HOM ' would complete $HOM instead of a new token.
Fixes another regression introduced in
6fb7f9b6b - Fix completion for builtins with subcommands
It's now good enough to do so.
We don't allow grid-alignment:
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
becomes
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
It's just more trouble than it is worth.
The one part I'd change:
We align and/or'd parts of an if-condition with the in-block code:
```fish
if true
and false
dosomething
end
```
becomes
```fish
if true
and false
dosomething
end
```
but it's not used terribly much and if we ever fix it we can just
reindent.
for-loops that were not inside a function could overwrite global
and universal variables with the loop variable. Avoid this by making
for-loop-variables local variables in their enclosing scope.
This means that if someone does:
set a global
for a in local; end
echo $a
The local $a will shadow the global one (but not be visible in child
scopes). Which is surprising, but less dangerous than the previous
behavior.
The detection whether the loop is running inside a function was failing
inside command substitutions. Remove this special handling of functions
alltogether, it's not needed anymore.
Fixes#6480
Store the entire function declaration, not just its job list.
This allows us to extract the body of the function complete with any
leading comments and indents.
Fixes#5285
In particular, this allows `true && time true`, or `true; and time true`,
and both `time not true` as well as `not time true` (like bash).
time is valid only as job _prefix_, so `true | time true` could call
`/bin/time` (same in bash)
See discussion in #6442
Extend the commit 8e17d29e04 to block processes, for example:
begin ; stuff ; end
or if/while blocks as well.
Note there's an existing optimization where we do not create a job for a
block if it has no redirections.
job_promote attempts to bring the most recently "touched" job to the front
of the job list. It did this via:
std::rotate(begin, job, end)
However this has the effect of pushing job-1 to the end. That is,
promoting '2' in [1, 2, 3] would result in [2, 3, 1].
Correct this by replacing it with:
std::rotate(begin, job, job+1);
now we get the desired [2, 1, 3].
Also add a test.
It looks like the last status already contains the signal that cancelled
execution.
Also make `fish -c something` always return the last exit status of
"something", instead of hardcoded 127 if exited or signalled.
Fixes#6444
This was previously required so that, if there was a redirection to a
file, we would fork a process to create the file even if there was no
output. For example `echo -n >/tmp/file.txt` would have to create
file.txt even though it would be empty.
However now we open the file before fork, so we no longer need special
logic around this.
Do this only when splitting on IFS characters which usually contains
whitespace characters --- read --delimiter is unchanged; it still
consumes no more than one delimiter per variable. This seems better,
because it allows arbitrary delimiters in the last field.
Fixes#6406
This adds a test for the obscure case where an fd is redirected to
itself. This is tricky because the dup2 will not clear the CLO_EXEC bit.
So do it manually; also posix_spawn can't be used in this case.
The IO cleanup left file redirections open in the child. For example,
/bin/cmd < file.txt would redirect stdin but also leave the file open.
Ensure these get closed properly.
Prior to this fix, a job would hold onto any IO redirections from its
parent. For example:
begin
echo a
end < file.txt
The "echo a" job would hold a reference to the I/O redirection.
The problem is that jobs then extend the life of pipes until the job is
cleaned up. This can prevent pipes from closing, leading to hangs.
Fix this by not storing the block IO; this ensures that jobs do not
prolong the life of pipes.
Fixes#6397
(command pwd) uses the system's implementation of pwd. At least the GNU
coreutils implementation defaults to -P, which resulted in symlinks being
expanded when switching between directories with nextd/prevd.
This did some weird unescaping to try to extract the first word.
So we're now more likely to be *correct*, and the alias benchmark is
about 20% *faster*.
Call it a win-win.
This splits a string into variables according to the shell's
tokenization rules, considering quoting, escaping etc.
This runs an automatic `unescape` on the string so it's presented like
it would be passed to the command. E.g.
printf '%s\n' a\ b
returns the tokens
printf
%s\n
a b
It might be useful to add another mode "--tokenize-raw" that doesn't
do that, but this seems to be the more useful of the two.
Fixes#3823.
This added the function offset *again*, but it's already included in
the line for the current file.
And yes, I have explicitly tested a function file with a function
defined at a later line.
Fixes#6350
Since #6287, bare variable assignments do not parse, which broke
the "Unsupported use of '='" error message.
This commit catches parse errors that occur on bare variable assignments.
When a statement node fails to parse, then we check if there is at least one
prefixing variable assignment. If so, we emit the old error message.
See also #6347
This adds initial support for statements with prefixed variable assignments.
Statments like this are supported:
a=1 b=$a echo $b # outputs 1
Just like in other shells, the left-hand side of each assignment must
be a valid variable identifier (no quoting/escaping). Array indexing
(PATH[1]=/bin ls $PATH) is *not* yet supported, but can be added fairly
easily.
The right hand side may be any valid string token, like a command
substitution, or a brace expansion.
Since `a=* foo` is equivalent to `begin set -lx a *; foo; end`,
the assignment, like `set`, uses nullglob behavior, e.g. below command
can safely be used to check if a directory is empty.
x=/nothing/{,.}* test (count $x) -eq 0
Generic file completion is done after the equal sign, so for example
pressing tab after something like `HOME=/` completes files in the
root directory
Subcommand completion works, so something like
`GIT_DIR=repo.git and command git ` correctly calls git completions
(but the git completion does not use the variable as of now).
The variable assignment is highlighted like an argument.
Closes#6048
Presently the completion engine ignores builtins that are part of the
fish syntax. This can be a problem when completing a string that was
based on the output of `commandline -p`. This changes completions to
treat these builtins like any other command.
This also disables generic (filename) completion inside comments and
after strings that do not tokenize.
Additionally, comments are stripped off the output of `commandline -p`.
Fixes#5415Fixes#2705
PATH and CDPATH have special behavior around empty elements. Express this
directly in env_stack_t::set rather than via variable dispatch; this is
cleaner.
This adds support for `fish_trace`, a new variable intended to serve the
same purpose as `set -x` as in bash. Setting this variable to anything
non-empty causes execution to be traced. In the future we may give more
specific meaning to the value of the variable.
The user's prompt is not traced unless you run it explicitly. Events are
also not traced because it is noisy; however autoloading is.
Fixes#3427
Until now, something like
`math '7 = 2'`
would complain about a "missing" operator.
Now we print an error about logical operators not being supported and
point the user towards `test`.
Fixes#6096
The `--entire` would enable output even though the `--quiet` should
have silenced it. These two don't make any sense together so print an
error, because the user could have just left off the `-q`.
This spewed errors because the `math` invocation got no second
operand:
Testing file checks/sigint.fish ... math: Error: Too few arguments
'1571487730 -'
but only if the `date` didn't do milliseconds, which is the case on
FreeBSD and NetBSD.
(also force the variable to be global - we don't want to have a
universal causing trouble here)
Universal exported variables (created by `set -xU`) used to show up
both as universal and global variable in child instances of fish.
As a result, when changing an exported universal variable, the
new value would only be visible after a new login (or deleting the
variable from global scope in each fish instance).
Additionally, something like `set -xU EDITOR vim -g` would be imported
into the global scope as a single word resulting in failures to
execute $EDITOR in fish.
We cannot simply give precedence to universal variables, because
another process might have exported the same variable. Instead, we
only skip importing a variable when it is equivalent to an exported
universal variable with the same name. We compare their values after
joining with spaces, hence skipping those imports does not change the
environment fish passes to its children. Only the representation in
fish is changed from `"vim -g"` to `vim -g`.
Closes#5258.
This eliminates the issue #5348 for universal variables.
Consider a group of short options, like -xzPARAM, where x and z are options and z takes an argument.
This commit enables completion of the argument to the last option (z), both within the same
token (-xzP) or in the next one (-xz P).
complete -C'-xz' will complete only parameters to z.
complete -C'-xz ' will complete only parameters to z if z requires a parameter
otherwise, it will also complete non-option parameters
To do so this implements a heuristic to differentiate such strings from single long options. To
detect whether our token contains some short options, we only require the first character after the
dash (here x) to be an option. Previously, all characters had to be short options. The last option
in our example is z. Everything after the last option is assumed to be a parameter to the last
option.
Assume there is also a single long option -x-foo, then complete -C'-x' will suggest both -x-foo and
-xy. However, when the single option x requires an argument, this will not suggest -x-foo.
However, I assume this will almost never happen in practise since completions very rarely mix
short and single long options.
Fixes#332
This stops reading argument names after another option appears. It does not break any previous uses and in fact fixes uses like
```fish
function foo --argument-names bar --description baz
```
* `function` command handles options after argument names (Fixes#6186)
* Removed unneccesary test
I got tired of seeing ' ... ok (0 sec)' so now with GNU date/gdate
installed there is millisecond output shown. One can get rough
nanoseconds from gdate.
This sequence can be generatd by control-spacebar. Allow it to be bound
properly.
To do this we must be sure that we never round-trip the key sequence
through a C string.
Meaning empty variables, command substitutions that don't print
anything.
A switch without an argument
```fish
switch
case ...
end
```
is still a syntax error, and more than one argument is still a runtime
error.
The none-argument matches either an empty-string `case ''` or a
catch-all `case '*'`.
Fixes#5677.
Fixes#4943.
This test uses universal variables, and so it can fail when run
multiple times.
It might be a good idea to do this in general, but for now let's just
try it here.
Previously when propagating explicitly separated output, we would early-out
if the buffer was empty, where empty meant contains no characters. However
it may contain one or more empty strings, in which case we should propagate
those strings.
Remove this footgun "empty" function and handle this properly.
Fixes#5987
I tested this manually (`littlecheck.py -s fish=fish tests/checks/eval.fish`) from the base directory, which means I got
"tests/checks/eval", while the real test gets "checks/eval".
I then reran `make test_fishscript`, but that didn't pull in the
updated test - we should really handle that better.
I'm gonna add more tests to this and I don't want to touch the old stuff.
Notice that this needs to have the output of the complete_directories
test adjusted because this one now runs later.
That's something we should take into account in future.
history now often writes to the history file asynchronously, but the history
test expects to find the text in the file immediately after running the
command. Hack a bit in history to make this test more reliable.
This required a bit of thinking.
What we do is we have one test that fakes $HOME, and then we do the
various config tests there.
The fake config we have is reused and we exercise all of the same codepaths.
This prints a green "ok" with the duration, just like the rest of the
tests.
Note that this clashes a bit with
https://github.com/ridiculousfish/littlecheck/pull/3.
(also don't check for python again and again and again)
This is a bit weird sometimes, e.g. to test the return status (that
fish actually *returns $status*), we use a #RUN line with %fish
invoking %fish, so we can use the substitution.
Still much nicer.
The missing scripts are those that rely on config.
Especially as, in this case, the documentation is quite massive.
Caught by porting string's test to littlecheck.
See #3404 - this was already supposed to be included.
This is a nice test (ha!) for how this works and what littlecheck can
do for us.
1. Input is now the actual file, not "Standard Input" anymore. So
any errors mentioning that now include the filename.
2. Regex are really nice for filenames, but especially for line
numbers
3. It's much nicer to have the output where it's created, instead of
needing to follow three files at the same time.
Instead of requiring a flag to enable newline trimming, invert it so the
flag (now `--no-trim-newlines`) disables newline trimming. This way our
default behavior matches that of sh's `"$(cmd)"`.
Also change newline trimming to trim all newlines instead of just one,
again to match sh's behavior.
The `string collect` subcommand behaves quite similarly in practice to
`string split0 -m 0` in that it doesn't split its output, but it also
takes an optional `--trim-newline` flag to trim a single trailing
newline off of the output.
See issue #159.
This adds support for .check files inside the tests directory. .check
files are tests designed to be run with littlecheck.
Port printf test to littlecheck and remove the printf.in test.
It's always a bit annoying that `*` requires quoting.
So we allow "x" as an alternative, only it needs to be followed by
whitespace to distinguish it from "0x" hexadecimal notation.
This makes the following changes:
1. Events in background threads are executed in those threads, instead of
being silently dropped
2. Blocked events are now per-parser instead of global
3. Events are posted in builtin_set instead of within the environment stack
The last one means that we no longer support event handlers for implicit
sets like (example) argv. Instead only the `set` builtin (and also `cd`)
post variable-change events.
Events from universal variable changes are still not fully rationalized.
When setting a variable without a specified scope, we should give priority
to an existing local or global above an existing universal variable with
the same name.
In 16fd780484 there was a regression that
made universal variables have priority.
Fixes#5883
Brace expansion with single words in it is quite useless - `HEAD@{0}`
expanding to `HEAD@0` breaks git.
So we complicate the rule slightly - if there is no variable expansion
or "," inside of braces, they are just treated as literal braces.
Note that this is technically backwards-incompatible, because
echo foo{0}
will now print `foo{0}` instead of `foo0`. However that's a
technicality because the braces were literally useless in that case.
Our tests needed to be adjusted, but that's because they are meant to
exercise this in weird ways.
I don't believe this will break any code in practice.
Fixes#5869.
This read something like `o=!_validate_int`, and the flag modifier
reading kept the pointer after the `!`, so it created a long flag
called `_validate_int`, which meant it would not only error out form
```fish
argparse 'i=!_validate_int' 'o=!_validate_int' -- $argv
```
with "Long flag '_validate_int' already defined", but also set
$_flag_validate_int.
Fixes#5864.
As mentioned in #2900, something like
```fish
test -n "$var"; and set -l foo $var
```
is sufficiently idiomatic that it should be allowable.
Also fixes some additional weirdness with semicolons.
This removes semicolons at the end of the line and collapses
consecutive ones, while replacing meaningful semicolons with newlines.
I.e.
```fish
echo;
```
becomes
```fish
echo
```
but
```fish
echo; echo
```
becomes
```fish
echo
echo
```
Fixes#5859.
This keeps all unknown options in $argv, so
```fish
argparse -i a/alpha -- -a banana -o val -w
```
results in $_flag_a set to banana, and $argv set to `-o val -w`.
This allows users to use multiple argparse passes, or to simply avoid
specifying all options e.g. in completions - `systemctl` has 46 of
them, most not having any effect on the completions.
Fixes#5367.
This is a long-standing issue with how `complete --do-complete` does
its argument parsing: It takes an optional argument, so it has to be
attached to the token like `complete --do-complete=foo` or (worse)
`complete -Cfoo`.
But since `complete` doesn't take any bare arguments otherwise (it
would error with "too many arguments" if you did `complete -C foo`) we
can just take one free argument as the argument to `--do-complete`.
It's more of a command than an option anyway, since it entirely
changes what the `complete` call _does_.
Prior to this fix, a job would only inherit a pgrp from its parent if the
first command were external. There seems to be no reason for this
restriction and this causes tcsetgrp() churn, potentially cuasing SIGTTIN.
Switch to unconditionally inheriting a pgrp from parents.
This should fix most of #5765, the only remaining question is
tcsetpgrp from builtins.
Pursuant to 0be7903859, there still
remained one issue with the test when run from within a symlinked
directory after fish gained support for cding into symlinks.
This change should make the test function OK both when the tests are run
out of a PWD containing a symlink in its hierarchy and when run
otherwise.
The final test in `realpath.in` was based on the no-longer-valid
assumption that $PWD cannot be a symlink. Since the recent changes in
fish 3.0 to allow `cd`ing into "virtual" directories preserving symlinks
as-is, when `make test` was run from a path that contained a symlink
component, this test would fail the `pwd-resolved-to-itself` check.
As the test is not designed to initialize then cd into an absolute path
guaranteed to not be symbolic, so this final check is just wrong.
This has been driving nuts for years. The output of the diff emitted
when a test fails was always reversed, because the diff tool is called
with `${difftool} ${new} ${old}` so all the `-` and `+` contexts are
reversed, and the highlights are all screwed up.
The output of a `make test` run should show what has changed from the
baseline/expected, not how the expected differs from the actual. When
considered from both the perspective of intentional changes to the test
outputs and failed test outputs, it is desirable to see how the test
output has changed from the previously expected, and not the other way
around.
(If you were used to the previous behavior, I apologize. But it was
wrong.)
This was printed basically everywhere.
The user knows what they executed on standard input.
A good example:
```fish
set c (subme 513)
```
used to print
```
fish: Too much data emitted by command substitution so it was discarded
set -l x (string repeat -n $argv x)
^
in function 'subme'
called on standard input
with parameter list '513'
in command substitution
called on standard input
```
and now it is
```
fish: Too much data emitted by command substitution so it was discarded
set -l x (string repeat -n $argv x)
^
in function 'subme' with arguments '513'
in command substitution
```
See #5434.
This printed things like
```
in function 'f'
called on standard input
in function 'd'
called on standard input
in function 'b'
called on standard input
in function 'a'
called on standard input
```
As a first step, it removes the empty lines so it's now
```
in function 'f'
called on standard input
in function 'd'
called on standard input
in function 'b'
called on standard input
in function 'a'
called on standard input
```
See #5434.
If a function process is deferred, allow it to be unbuffered.
This permits certain simple cases where functions are piped to external
commands to execute without buffering.
This is a somewhat-hacky stopgap measure that can't really be extended
to more general concurrent processes. However it is overall an improvement
in user experience that might help flush out some bugs too.
POSIX dictates here that incomplete conversions, like in
printf %d\n 15.2
or
printf %d 14g
are still printed along with any error.
This seems alright, as it allows users to silence stderr to accept incomplete conversions.
This commit implements it, but what's a bit weird is the ordering between stdout and stderr,
causing the error to be printed _after_, like
15
14
15.1: value not completely converted
14,2: value not completely converted
but that seems like a general issue with how we buffer the streams.
(I know that nonfatal_error is a copy of most of fatal_error - I tried
differently, and va_* is weird)
Fixes#5532.
Before this change, - was sorted with other punctuation before
A-Z. Now, it sorts above the rest of the characters.
This has a practical effect on completions, where when there are
both -s and --long with the same description, the short option
is now before the long option in the pager, which is what is now
selected when navigating `foo -<TAB>`. The long options can be
picked out with `foo --<TAB>`. Before, short options which
duplicated a long option literally could not be selected by
any means from the pager.
Fixes#5634
This tweaks wcsfilecmp such that certain punctuation characters will
come after A-Z.
A big win with `set <TAB>` - the __prefixed fish junk now comes
after the stuff users should care about.
This disables an extra round of escaping in the `string replace -r`
replacement string.
Currently, to add a backslash to an a or b (to "escape" it):
string replace -ra '([ab])' '\\\\\\\$1' a
7 backslashes!
This removes one of the layers, so now 3 or 4 works (each one escaped
for the single-quotes, so pcre receives two, which it reads as one literal):
string replace -ra '([ab])' '\\\\$1' a
This is backwards-incompatible as replacement strings will change
meaning, so we put it behind a feature flag.
The name is kinda crappy, though.
Fixes#5474.
As a simple replacement for `wc -l`.
This counts both lines on stdin _and_ arguments.
So if "file" has three lines, then `count a b c < file` will print 6.
And since it counts newlines, like wc, `echo -n foo | count` prints 0.
It turns out that `string split0` didn't actually ever do any
splitting. The arg_iterator_t already split stdin on NUL, and split0 just
performed an additional search that could never succeed (since
arguments from argv already can't contain NUL).
Let the arg_iterator_t not perform any splitting if asked, and then
let split0 split in 0.
One slight wart is that split0 ignores a trailing NUL, which normal
split doesn't.
Fixes#5701.
In a galaxy far, far away, event_blockage_t was intended to block only cetain
events. But it always just blocked everything. Eliminate the event block
mask.
On some systems, this sometimes uses unicode quotation marks.
Not on mine, but on Travis it does.
The only other workaround I can think of is setting locale to C, but
that implies not being able to test anything unicode-related in the
entire invocation tests.
So for now disable this test.
Illumos/OpenIndiana/SunOS/Solaris has an rm/rmdir that tries to
protect the user by not allowing them to delete $PWD.
Normally, this would be a good thing as deleting $PWD is a stupid
thing to do. Except in this case, we absolutely need to do that.
So instead we weasel around it by invoking an sh to cd out of the
directory to then invoke an `rmdir` to delete it. That should throw
off any attempts at protection (we could also have tried $PWD/. or
similar, but that's possibly still protected against).
This is the last failing test on
Illumos/OpenIndiana/SunOS/Solaris/afunnyquip, so:
Fixes#5472.
This tested #1728, where redirecting a directory (`begin; something;
end < .`) would cause `status` to misbehave.
Unfortunately, on Illumos/OpenIndiana/SunOS, this returns a different
error (EINVAL instead of EISDIR), so we can't check that with our test harness, because
we can't redirect it.
Since it's not important that this gives the same error across
systems (and indeed we provide no way of intercepting the error!),
use an invocation test instead, because that allows different output per-uname.
See #5472.
300ms was waaay too long, and even 100ms wasn't necessary.
Emacs' evil mode uses 10ms (0.01s), so let's stay a tad higher in case
some terminals are slow.
If anyone really wants to be able to type alt+h with escape, let them
raise the timeout.
Fixes#3904.
This is a large change to how io_buffers are filled. The essential problem
comes about with code like (example):
echo ( /bin/pwd )
The output of /bin/pwd must go to fish, not the tty. To arrange for this,
fish does the following:
1. Invoke pipe() to create a pipe.
2. Add an io_bufferfill_t redirection that owns the write end of the pipe.
3. After fork (or equiv), call dup2() to replace pwd's stdout with this pipe.
Now when /bin/pwd writes, it will send output to the read end of the pipe.
But who reads it?
Prior to this fix, fish would do the following in a loop:
1. select() on the pipe with a 10 msec timeout
2. waitpid(WNOHANG) on the pwd proc
This polling is ugly and confusing and is what is replaced here.
With this new change, fish now reads from the pipe via a background thread:
1. Spawn a background pthread, which select()s on the pipe's read end with
a long (100 msec) timeout.
2. In the foreground, waitpid() (allowing hanging) on the pwd proc.
The big win here is a major simplification of job_t::continue_job() since
it no longer has to worry about filling buffers. This will make things
easier for concurrent execution.
It may not be obvious why the background thread still needs a poll (100 msec).
The answer is for cases where the write end of the fd escapes, in particular
background processes invoked inside command substitutions. psub is perhaps
the only important case of this (other shells typically just hang here).
Using printf like
printf "The message"
is unsafe, because if the message contains any formatting characters,
they'll be interpreted.
In this case it's not all that important because the message contains
only filenames of our tests and static strings, but still.
A while loop now evaluates to the last executed command in the body, or
zero if the loop body is empty. This matches POSIX semantics.
Add a bunch of tricky tests.
See #4982
For some reason, we have two places where a variable can be read-only:
- By key in env.cpp:is_read_only(), which is checked via set*
- By flag on the actual env_var_t, which is checked e.g. in
parse_execution
The latter didn't happen for non-electric variables like hostname,
because they used the default constructor, because they were
constructed via operator[] (or some such C++-iness).
This caused for-loops to crash on an assert if they used a
non-electric read-only var like $hostname or $SHLVL.
Instead, we explicitly set the flag.
We might want to remove one of the two read-only checks, or something?
Fixes#5548.
There's just waaayy too many things that could go wrong with it, so it
annoys more than it helps, especially since we don't get any
indication what failed.
E.g. on FreeBSD, the test failed without a usable message just because
`tput` couldn't find an attribute (so colors were unset).
The one thing I was missing:
`echo -n` isn't POSIX. In practice, it appears the only shell to encounter this
is macOS' crusty old bash in sh-mode. Just replace it with `touch`.
This reverts commit fc5e8f9fec.
This makes the script worse, but it's good enough.
The required changes are:
- `shopt -s nullglob`, which we simply don't use (we have one glob, but that's
guaranteed to match because we ship the files)
- One array, which we replace with a direct use of the glob (plus it
used `echo` again?)
- The `function` word, which I'm still annoyed is even a thing!
- Variable indirection (`color=${!color_var}` - instead we pass the
value directly - which makes the script uglier!)
- One array, which we replace with a function
- A use of `type -t`, replaced with `command -v`
- A use of `${var:begin:end}` substring expansion, replaced with trickery.
- `set -o pipefail` is replaced with a function
Note that checkbashisms still complains about `command -v`, because
we're not using it with "-p". But we _want_ to check the current
$PATH, and `command -v` is POSIX.
This still uses `local`, which technically isn't in POSIX.
The tests now appear to pass in:
- bash
- dash
- zsh
- mksh
- busybox
Rather than killing the process with close, read EOF after sending the
"exit" command and wait for OS cleanup (per the expect examples).
Not cleaning up with wait caused expect to crash on all 32-bit platforms
including i586 and armv7l with "alloc: invalid block: 0xbf993ccb: 3d 3b".
64-bit platforms were not affected, for reasons that are not clear.
Turns out busybox diff (used on alpine) defaults to unified output,
which we can't use because that prints filenames, and those are
tempfiles made by psub.
Instead, we use builtins to print the first line and compare the others.
This isn't all that important, and it breaks on musl just because the message is different.
Just skip it for now, until we figure out how to better test this.
This `set TERM`. Which, if $TERM is inherited, is already exported,
but not if it isn't.
This is the case on sr.ht's arch images, so we failed without a TERM variable.
Return STATUS_INVALID_ARGS when failing due to evaluation errors,
so we can tell the difference between an error and falseness.
Add a test for the ERANGE error
This previously used /dev/tty to make sure we have `source` connected
to a terminal. Only as it turns out, FreeBSD doesn't have that (https://builds.sr.ht/~faho/job/15308).
So instead, let's just use the expect tests since stdin there is by
definition a terminal.
This broke fishtape, which did
somestuff | fish -c "source"
Because `source` didn't have a redirection, it refused to read from
stdin.
So, to keep the common issue of `source (command that does not print)`
from seeminly stopping fish, we instead actually check if stdin is a terminal.
The colors happening for the interactive tests didn't match the
expected output. For `history search` commands we test, have them
pipe through `cat` so the fishscript does not use a pager or try
to colorize.
realpath() will return NULL and sets errno if it fails.
We asserted that realpath(".") does not fail. We also didn't really
check that it was successful. Made sure we'll get a perror telling
us about what went wrong if something like this happens again.
Updated tests and added test case
Fixes#5351
Prior to this fix, cding into a symlink and then completing .. would complete
from the physical directory instead of the logical directory, which could not
actually be cd'd to. Teach cd completiond to use the logical directory.
For things like
source $undefined
or
source (nooutput)
it was quite annoying that it read from tty.
Instead we now require a "-" as the filename to read from the tty.
This does not apply to reading from stdin if it's redirected, so
something | source
still works.
Fixes#2633.
This adds flags --path and --unpath to builtin set, analogous to
--export and --unexport. These flags change whether a variable is
marked as a path variable.
Universal variables cannot yet be path variables.
This switches quoted expansion like "$foo" to use foo's delimiter instead of
space. The delimiter is space for normal variables and colonf or path variables.
Expansions like "$PATH" will now expand using ':'.
This commit begins to bake in a notion of path-style variables.
Prior to this fix, fish would export arrays as ASCII record separator
delimited, except for a whitelist (PATH, CDPATH, MANPATH). This is
surprising and awkward for other programs to deal with, and there's no way
to get similar behavior for other variables like GOPATH or LD_LIBRARY_PATH.
This commit does the following:
1. Exports all arrays as colon delimited strings, instead of RS.
2. Introduces a notion of "path variable." A path variable will be
"colon-delimited" which means it gets colon-separated in quoted expansion,
and automatically splits on colons. In this commit we only do the exporting
part.
Colons are not escaped in exporting; this is deliberate to support uses
like
`set -x PYTHONPATH "/foo:/bar"`
which ought to work (and already do, we don't want to make a compat break
here).
This switches fish to a "virtual" PWD, where it no longer uses getcwd to
discover its PWD but instead synthesizes it based on normalizing cd against
the $PWD variable.
Both pwd and $PWD contain the virtual path. pwd is taught about -P to
return the physical path, and -L the logical path (which is the default).
Fixes#3350
Mostly resolves#4862, though there remains the lingering question of
whether or not to emit a warning to /dev/tty or stderr when a
non-literal-zero index evaluates to zero.
This allows for marking certain bindings as part of a preset, which allows us to
- only erase those when switching presets
- go back to the preset binding when erasing a user binding
- only show user customization if requested
- make bare bind statements in config.fish work (!!!11elf!!!)
Fixes#5191.
Fixes#3699.
- Add support for:
- Jumping to the character before a target.
- Repeating the previous jump (same direction, same precision).
- Repeating the previous jump in the reverse order.
- Enhance vi bindings.
When running a builtin, if we are an interactive shell and stdin is a tty,
then acquire ownership of the terminal via tcgetpgrp() before running the
builtin, and set it back after.
Fixes#4540
This changes the behavior of builtin math to floating point by default.
If the result of a computation is an integer, then it will be printed as an
integer; otherwise it will be printed as a floating point decimal with up to
'scale' digits past the decimal point (default is 6, matching printf).
Trailing zeros are trimmed. Values are rounded following printf semantics.
Fixes#4478
This adds a new string command split0, which splits on zero bytes.
split0 has superpowers because its output is not further split on
newlines when used in command substitutions.
If just one of the range ends is negative, this now forces direction away from it.
I.e. if the beginning is negative, we go in reverse.
If the end is negative, we go forwards.
This fixes cases like
$var[2..-1]
if $var only has one element.
This partially reverts 5b489ca30f, with
carets acting as redirections unless the stderr-nocaret flag is set.
This flag is off by default but may be enabled on the command line:
fish --features stderr-nocaret
This introduces a new command line option --features which can be used for
enabling or disabling features for a particular fish session.
Examples:
fish --features stderr-nocaret
fish --features 3.0,no-stderr-nocaret
fish --features all
Note that the feature set cannot be changed in an existing session.
This teaches the status command to work with features.
'status features' will show a table listing all known features and whether
they are currently on or off.
`status test-feature` will test an individual feature, setting the exit status to
0 if the feature is on, 1 if off, 2 if unknown.
`read` with IFS empty was expected to set all parameters after the first
n filled variables to an empty string, but that was inconsistent with
the behavior of `read` everywhere else.
I'm not sure why fish differed from the spec with regards to the
behavior in the event of an empty IFS: we eschew IFS where possible, yet
here we adopt non-standard behavior splitting on every (unicode)
character instead of not splitting at all with IFS empty. We still do
that, but now the unset variables are treated as they normally would be,
i.e. cleared and not set to an empty string (which is what an empty
value between two IFS separators would contain).
This removes the caret as a shorthand for redirecting stderr.
Note that stderr may be redirected to a file via 2>/some/path...
and may be redirected with a pipe via 2>|.
Fixes#4394
Variables set in if and while conditions are in the enclosing block, not
the if/while statement block. For example:
if set -l var (somecommand) ; end
echo $var
will now work as expected.
Fixes#4820. Fixes#1212.
This promotes "and" and "or" from a type of statement to "job
decorators," as a possible prefix on a job. The point is to rationalize
how they interact with && and ||.
In the new world 'and' and 'or' apply to a entire job conjunction, i.e.
they have "lower precedence." Example:
if [ $age -ge 0 ] && [ $age -le 18 ]
or [ $age -ge 75 ] && [ $age -le 100 ]
echo "Child or senior"
end
This now reports "TOO_MANY_ARGS" instead of no error (and triggering
an assertion).
We might want to add a new error type or report the missing operator
before, but this is okay for now.
This enables some limited use of arguments for wrapping completions. The
simplest example is that complete gco -w 'git checkout' now works like
you would want: `gco <tab>` now invokes git's completions with the
`checkout` argument prepended.
Fixes#1976
`argparse`, `read`, `set`, `status`, `test` and `[` now can't be used
as function names anymore.
This is because (except for `test` and `[`) there is no way to wrap these properly, so any
function called that will be broken anyway.
For `test` (and `[`), there is nothing that can be added and there
have been confused users who created a function that then broke
everything.
Fixes#3000.
This switches function execution from the function's source code to
its stored node and pstree. This means we no longer have to re-parse
the function every time we execute it.
Some of these were failing on Travis quite often, and this is probably
the result of too tight a window.
E.g. one emacs test (transpose words, default timeout, short delay)
waited 250ms to enter something else, with a timeout of 300ms. That
meant a window of 50ms.
The psub tests create a fifo and launch a background job to write to it.
However fifos have this obnoxious behavior where opening the file blocks
until both sides are ready. In one of the tests we don't actually read
from the fifo we create, so the background job hangs, and the tests
never complete. Fix this by just reading from the fifo.
This was caused by it prepending "-s" to argv always,
and later checking $argv[1].
As it turns out, that is kinda superfluous, so we can just add "-s" to
the `bind` calls.
Also adjust the tests so the vi-bindings are enabled via the function,
which would have caught this.
Fixes#4494.
Prior to this fix, a "bare variable" in math like 'x + 1' would be
looked up in the environment, i.e. equivalent to '$x + 1'. This appears
to have been done for performance. However this breaks the orthogonality
of fish; performance is not a sufficient justification to give math this
level of built-in power, especially because the performance of math is
not a bottleneck. The implementation is also ugly.
Remove this feature so that variables must be prefixed with the dollar
sign and undergo normal variable expansion. Reading 'git grep' output
does not show any uses of this in fish functions or completions.
Also added to changelog.
Fixes#4393
Instead of treating the search term as a literal string to be matched
treat it as a glob. This allows the user to get a more useful set of
results by using the `*` glob character in the search term.
Partial fix for #3136
* Implement `history search --reverse`
It should be possible to have `history search` output ordered oldest to
newest like nearly every other shell including bash, ksh, zsh, and csh.
We can't make this the default because too many people expect the
current behavior. This simply makes it possible for people to define
their own abbreviations or functions that provide behavior they are
likely used to if they are transitioning to fish from another shell.
This also fixes a bug in the `history` function with respect to how it
handles the `-n` / `--max` flag.
Fixes#4354
* Fix comment for format_history_record()
* Hoist `for` loop control var to enclosing scope
It should be possible to reference the last value assigned to a `for`
loop control var when the loop terminates. This makes it easier to detect
if we broke out of the loop among other things. This change makes fish
`for` loops behave like most other shells.
Fixes#1935
* Remove redundant line
cherry-picked from krader1961/fish-shell commit b69df4fe72
Fixes#4353 (regression in indexing of history contents) and introduces
new unit tests to catch bad $history indexing in the future.
Remove our `math` function that wraps `bc`. Our math builtin is now good
enough that it can be the default implementation.
Another step in resolving #3157.
Using a read-only variable like `status` as a for loop control variable
has never worked. But without this change you simply get non-sensical
behavior that leaves you scratching your head in puzzlement. This change
replaces the non-sensical behavior with an explicit error message.
Fixes#4342
Internally fish should store vars as a vector of elements. The current
flat string representation is a holdover from when the code was written
in C.
Fixes#4200
A semi-empty var is one with a single empty string element. The
`env_var_t::empty()` method returns true for such vars but we want
`set --show` to report that it has a single empty element.
This makes command substitutions impose the same limit on the amount
of data they accept as the `read` builtin. It does not limit output of
external commands or builtins in other contexts.
Fixes#3822
This adds a new capability to the `set` command. It is similar to
running `set` with no other arguments but provides far more detail about
each variable. Such as whether it is set in each of the local, global,
and universal scopes. And the values in each scope. You can also ask for
specific variables to be shown.
Fixes#4265
Rewrite the `abbr` function to store each abbreviation in a separate
variable. This greatly improves the efficiency. For the common case
it is 5x faster. For pathological cases it is upwards of 100x faster.
Most people should be able to unconditionally define abbreviations in
their config.fish without a noticable slow down.
Fixes#4048
This takes a string that is then split upon like `string split`.
Unlike $IFS, the string is used as one piece, not a set of characters.
There is still a fallback to IFS if no delimiter is given, that
behaves exactly as before.
Fixes#4156.
This completes the refactoring of the `set` builtin. It also removes a
seemingly never used feature of the `set` command. It also eliminates all
the lint warnings about this module.
Fixes#4236
When reporting whether a boolean flag was seen report the actual flags
rather than a summary count. For example, if you have option spec `h/help`
and we parse `-h --help -h` don't do the equivalent of `set _flag_h 3`
do `set _flag_h -h --help -h`.
Partial fix for #4226
The recent change to switch `psub` to use `argparse` caused it to use
a fifo by default because it inadvertently fixed a long standing bug in
the fish script. This changes the behavior back to `psub --file` being
the default behavior and introduces a `--fifo` flag. It also updates the
documentation to make it clearer when and why `--fifo` mode should not
be used.
Fixes#4222
While updating the `history` function to use `argparse` I realized it is
useful to define an option that can be used in three ways. First by
using the short flag; e.g., `-n NNN`. Second by using the long flag;
e.g., `--max NNN`. Third, as an implicit int flag; e.g., `-NNN`. This
use case is now supported by a spec of the form `n#max`.
A recent regression to the `alias` command points out the need for more
unit tests of its behavior. I also decided to use it as an opportunity
to normalize the output of just `alias` to list aliases.
The previous change to use `argparse` for parity with every other
builtin and function introduced a regression. Invocations that start
with a negative number can fail because the negative value looks like an
invalid flag.
This implements support for numeric flags without an associated short or
long flag name. This pattern is used by many commands. For example `head
-3 /a/file` to emit the first three lines of the file.
Fixes#4214
This implements a `fish_opt` command that provides a way for people
to create option specs for the `argparse` command as an alternative to
creating such strings by hand.
Fixes#4190
The count command should not treat any flag specially. Not even `-h` and
`--help`. It should simply return a count of the number of arguments it
received.
Fixes#4189
Don't import the bash history if the user has specified that a non-default
fish history file should be used. Also, rename the var that specifies
the fish history session ID from `FISH_HISTFILE` to `FISH_HISTORY`.
Fixes#4172
Using the FISH_HISTFILE variable will let people customise the session
to use for the history file. The resulting history file is:
`$XDG_DATA_HOME/fish/name_history`
Where `name` is the name of the session. The default value is `fish`
which results in the current history file.
If it's set to an empty string, the history will not be stored to a
file.
Fixes#102
Because the 'getopt' library differs between systems, it's likely
that there will be different output. This is the case between the
GNU-based Linux and the BSD-based Darwin, for the 'getopt' library,
it seems. It causes the tests to produce different results.
To allow us to test, and check for regressions, on the different
platforms, the invocation code has been updated to allow a
system-specific suffix to be used on the test files. If this suffix
is found, the test will also be flagged as being system-specific
which should ensure the change in behaviour is noted.
The Travis macOS test systems do not appear to have colordiff present, so any
failures would mean that no output would be shown. This may also be a
problem for the other test scripts as well, but the invocation tests are
the ones being affected here.
We change our behaviour to downgrade to the plain diff tool if colordiff is
not present.
The invocation tests were not especially clear on how they should be
used, without reading the code. And who really wants to do that? So,
a description of what the test does (and thus what each file is) is
now present in the file prologue comment.
Some more of the invocations are tested in this change:
- bad switches
- errors in configuration files
- regular command, configuration and init command ordering
- persistence of variables over command invocation.
- interactive and login switch use
- terminal exit code return
- version request
There are sure to be other invocations that should be tested, but
these give a fair number of them a go.
The new '-C' initial command needs some tests, and as there are no
tests just yet for the command invocation, this change adds a harness
and calls it from the high-level tests in the Makefile.
The tests are similar in style to the other high level tests, in that
we capture the output and compare it to that which we expect. The
harness itself is written in bash - sorry - because we're testing the
fish shell's invocation, and trying to do that with the fish we've
just built wouldn't actually make for a very useful test when things
go wrong.
The 'tests/invocation.sh' script can be executed manually, or as part
of the 'make test' target, to make it easy to use both as part of the
development and as part of automation.
The harness has only been tested on linux with bash 4.3.11, and requires
grep and sed. Although not tested with OS X, I believe I have avoided
the syntax which is inconsistent.
The tests added here cover just the initial command's basic execution,
and when it is mixed with the regular '-c' command.
We need a way to encode arbitrary strings into valid fish variable
names. It would also be nice if we could convert strings to valid URLs
without using the slow and hard to understand `__fish_urlencode` function.
In particular, eliminating the need to manipulate the locale.
Fixes#4150
This just removes every invalid index.
That means with `set foo a b c` and the "show" function from tests/expand.in:
- `show $foo[-5..-1]` prints "3 a b c"
- `show $foo[-10..1]` prints "1 a"
- `show $foo[2..5]` prints "2 b c"
- `show $foo[1 3 7 2]` prints "3 a c b"
and similar for command substitutions.
Fixes#826.
This implements `status is-breakpoint` that returns true if the current
shell prompt is displayed in the context of a `breakpoint` command.
This also fixes several bugs. Most notably making `breakpoint` a no-op if
the shell isn't interactive. Also, typing `breakpoint` at an interactive
prompt should be an error rather than creating a new nested debugging
context.
Partial fix for #1310
This changes all of the builtins to behave like `string` to return
STATUS_INVALID_ARGS (121) if the args passed to the command don't make
sense. Also change several of the builtins to use the existing symbols
(e.g., STATUS_CMD_OK and STATUS_CMD_ERROR) rather than hardcoded "0"
and "1" for consistency and to make it easier to find such values in
the future.
Fixes#3985
Per discussion in PR#3998 to review adding a `--filter` flag to `string
replace` rename the same flag in the `string match` subcommand to avoid
confusion about the meaning of the flag.
Discussion in issue #3295 resulted in a decisions to rename the
functions --metadata flag to --details.
This also fixes a bug in the definition of the short flags for the
`functions` command. The `-e` flag does not take an argument and
therefore should not be defined as `e:`. Notice that the long form,
`--erase`, specifies `no_argument`. This discrepency happened to work
due to a quirk of how the flag parsing loop was written.
The bind mode names can be, and are, used in the construction of fish
variable names. So don't allow users to use names that are not legal as
a variable name. This should not break anything since, AFAICT, no
existing fish scripts, including those provided by Oh-My-Fish and
Fisherman define bind modes that would not be legal with this change.
Fixes#3965
This is to fix tests on Travis, since that stores the commit message in an environment variable.
`env | grep MANPATH` of course picks it up and generates unwanted output.
Yes.
Fixes invalid character in variable name $fish_cursor_replace-one (used by fish_vi_cursor[_handle]) by renaming bind mode 'replace-one' to 'replace_one'.
Reviewing a PR for a completion script caused me to look at the
implementation for the `__fish_complete_directories` function. Which in
turn lead me to create this change to improve its implementation and add
unit tests for the function.
- Error out if anything that is not a PID is given
- Otherwise background all matching existing jobs, even if not all
PIDs exist (but print a message for the non-existing ones)
Fixes#3909.
If the first word of the alias body ends with a semicolon we need to
strip that character, and otherwise escape the extracted command, to
ensure the subsequent function definition is valid.
Fixes#3860
The previous change neglected to consider that numbers too large for the
long long datatype will result in calling strerror(ERANGE) whose return
value can vary depending on the platform. Which breaks the unit test.
This puts a hard upper bound of 10 MiB on the amount of data that read
will consume. This is to avoid having the shell consume an unreasonable
amount of memory, possibly causing the system to enter a OOM condition,
if the user does something non-sensical.
Fixes#3712
read_in_chunks does not clear the intermediate string 'str'
between iterations, so every chunk has every other chunk prepended
to it.
A secondary issue is that it calls str2wcstring() on an intermediate
chunk, which may split multi-byte sequences. This needs to be deferred
to the end.
Test added. Fixes#3756
This implements a way to use the `functions` command to perform
introspection to learn about the characteristics of a function. Such as
where it came from.
Fixes#3295
After 'x' is used to delete a character at the end of a line the cursor
should be repositioned at the last character, i.e. repeatedly pressing
'x' in normal mode should delete the entire string.
The abbr function doesn't have the possiblity to rename abbreviations.
You have to delete the old one and create a new one. This commit adds
this functionality and uses the syntax:
abbr -r OLD_KEY NEW_KEY
Fixes#2155.
This augments the previous change for issue #3346 by adding an error
message when an invalid integer is seen. This change is likely to be
controversial so I'm not going to squash it into the previous change.
There isn't a good reason to disallow an explicitly empty completion
description. Since I'm touching the code also modify the argument
parsing the match the style of most of the builtins.
Fixes#3557.
There was a discussion recently on Gitter about `set_color reset`. The
result was @floam creating commit bd03c3fbc to change it to `set_color
normal` in share/functions/vared.fish. This does the same for
tests/test_util.fish.
The `status` command currently silently allows incompatible flags (i.e.,
subcommands). Too, using flags to specify subcommands misleads the user
into thinking they can specify multiple subcommands.
We recently modified the `history` command to deprecate using flags for
subcommands. This change does the same for the `status` command.
Fixes#3509
After implementing `builtin fish_realpath` it was noticed that it did
not behave like GNU `realpath` without options. Which is super annoying
since that was the whole point of implementing the command. Major
failure on my part since I wrote the unit tests to match the behavior of
the existing `wrealpath()` function that I simply exposed as a builtin
command. Rather than actually verifying it behaved in a manner
compatible with GNU realpath.
Also, while the decision to call the builtin `fish_realpath` seemed to
make sense at the time of the original commit further reflection has
shown that to be a silly, idiosyncratic, thing to have done. So rename
it to simply `realpath`.
Fixes 3400
This deprecates the use of long options for history sub-commands (e.g.,
`history --delete`) in favor of proper sub-commands (e.g., `history
delete`). It also eliminates the short options for those sub-commands.
Also change option processing to allow options anywhere on the command
line to match how the vast majority of fish builtins handle flags.
Replace --with-time with --show-time.
Fixes#3367
Update history docs.
Note - the omission of a mention of timezone was intentional. These were recorded as naive timestamps lacking timezone information in the first place.
Another dev noticed that tests/printf.in was failing because they didn't have
the fr_FR.UTF-8 locale installed. Make that test more resilient by trying
other locales and if no suitable locale is found skipping the test.
Implementing the --shadow-builtin flag has proven to be highly controversial.
Revert the introduction of that flag to the `function` command. If someone
shoots themselves in the foot by redefining a builtin as a function that's
their problem and not our responsibility to protect them from doing so.
Fixes#3319
The recent change to reconcile the history builtin command and function
broke an undocumented behavior of `history --delete`. This change
reinstates that behavior. It also adds an explicit `--exact` search mode
for the `--search` and `--delete` subcommands.
Fixes#3270
This undoes the inheritance since it shared too much.
The idea here is to share bindings that aren't something the editors we're inspired by do - there's no "execute" in vi.
The basic editing and moving bindings are now vi-style in vi-mode and emacs-style in default mode.
This fixes several problems with how the builtin `history` command handles
arguments. It now complains and refuses to do anything if the user specifies
incompatible actions (e.g., `--search` and `--clear`). It also fixes a
regression introduced by previous changes with regard to invocations that
don't explicitly specify `--search` or a search term.
Enhances the history man page to clarify the behavior of various options.
This change is already far larger than I like so unit tests will be added
in a separate commit.
Fixes#3224.
Note: This fixes only a couple problems with the interactive `history
--delete` command in the `history` function. The main problem will be
dealt with via issue #31.
Attempting to execute something like `exec "$test"` results in a fish internal
token (a Unicode private use char) being printed in the resulting error
message. That's obviously not desirable as well as confusing.
Fixes#3187
Someone running fish in an unusual locale reported that an `assert()` was
firing when they typed `pkill c`. I traced it to two bugs. First, the
__fish_make_completion_signals command was producing a weird result. Second,
the builtin `complete` command wasn't adequately verifying its arguments.
Fixes#3129
The tests/*.status files aren't useful so eliminate them. Just verify whether
a given test module exited with a success status. There isn't any point in
having a "status" file that indicates the test module should exit with a
success (zero) status.
Closes#3208Closes#3209
I did some research and experiments. For good or bad the `bind` command
requires the use of wide char codepoints (e.g., \u1234) for non-ASCII
chars. So don't force the use of the POSIX locale, but do provide it as
an option for people who want to see the individual bytes rather than a
decoded wide char.
Simplify the format of the information displayed for each character. There
really isn't much point in providing decimal, octal, and hexadecimal. Just
print hex and symbolic representations.
Add an example `bind` command that a user can copy/paste.
Closes#3183
Another developer noticed that redirecting stdin of `fish_key_reader`
results in weird behavior. Which is not at all surprising. So add checks
to ensure stdin and stdout are attached to a tty.
Add some rudimentary unit tests for this program.
For example, an argument 12345^ is a real argument, not a redirection
There's no reason to use ^ here instead of >, and it's annoying to git
users.
Fixes#1873
Fix test setup bogosities. Specifically, they weren't hermetic with respect to
locale env vars.
Rewrite the handling of locale vars to simplify the code and make it more like
the pattern most programs employ.
Fixes#3110
Configure the tty driver to ignore the lnext (\cV) and werase (\cW) characters
so they can be bound to fish functions.
Correct the `fish_key_bindings` program to initialize the tty in the same
manner as the `fish` program.
Fixes#3064
Previously, `--erase` would not accept any options and wouldn't read
"--" as option-separator. Now it does like every other "command", and it
could conceivably gain e.g. a "--prefix" option.
This change does several things. First, and most important, it allows
dumping the "n" most recent stack frames on each debug() call. Second,
it demangles the C++ symbols. Third, it prepends each debug() message
with the debug level.
Unrelated to the above I've replaced all `assert(!is_forked_child());`
statements with `ASSERT_IS_NOT_FORKED_CHILD()` for consistency.
It's currently too easy for someone to bork their shell by doing something
like `function test; return 0; end`. That's obviously a silly, contrived,
example but the point is that novice users who learn about functions are
prone to do something like that without realizing it will bork the shell. Even
expert users who know about the `test` builtin might forget that, say, `pwd`
is a builtin.
This change adds a `--shadow-builtin` flag that must be specified to
indicate you know what you're doing.
Fixes#3000
This makes it easy for the user to request floating point output with the
desired number of digits after the decimal point (not to be confused with
significant digits).
Note that this is just a thin wrapper so someone can say `math -s3 10 / 3`
rather than `math "scale=3; 10 /3"`.
Resolves#1643
In my rush to get the fix for the wrong default Vi mode escape delay merged
(commit 3e24ae80b3) I neglected to update the
unit test. This change corrects that oversight.
Fish keywords can be quoted and split across lines. Prior to this change
`fish_indent` would retain such odd, obfuscated, formatting. This change
results in all keywords being converted to their canonical form.
This required fixing a bug: the keyword member of parse_node_t wasn't being
populated. This hadn't been noticed prior to now because it wasn't used.
Fixes#2921
Prior to this fix, when completing a command that doesn't have a /, we
would prepend each component of PATH and then expand the whole thing. So
any special characters in the PATH would be interpreted when performing
tab completion.
With this fix, we pull the PATH resolution out of complete.cpp and
migrate it to expand.cpp. This unifies nicely with the CDPATH resolution
already in that file. This requires introducing a new expand flag
EXPAND_SPECIAL_FOR_COMMAND, which is analogous to EXPAND_SPECIAL_CD
(which is renamed to EXPAND_SPECIAL_FOR_CD). This flag tells expand to
resolve paths against PATH instead of the working directory.
Fixes#952
Modify `fish_indent` to emit redirections without a space before the target of
the redirection; e.g., "2>&1" rather than "2>& 1" as the former is clearer to
humans.
Fixes#2899
The relevant standards allow the mbtowc/mbrtowc functions to reject
non-ASCII characters (i.e., chars with the high bit set) when the locale
is C or POSIX. The BSD libraries (e.g., on OS X) don't do this but
the GNU libraries (e.g., on Linux) do. Like most programs we need the
C/POSIX locales to allow arbitrary bytes. So explicitly check if we're
in a single-byte locale (which would also include ISO-8859 variants)
and simply pass-thru the chars without encoding or decoding.
Fixes#2802.
I noticed while fixing issue #2702 that the fish program being tested
was sourcing config.fish files outside of the current build. This also
happens when Travis CI runs the tests but isn't an issue there because
of how Travis is configured to execute the tests.
I also noticed that running `make test` was polluting my personal fish
history; which will become a bigger problem if and when the fishd universal
var file is moved from $XDG_CONFIG_HOME to $XDG_DATA_HOME.
This change makes it possible for an individual to run the tests on
their local machine secure in the knowledge that only the config.fish and
related files from their git repository will be used and doing so won't
pollute their personal fish history.
Resolves#469
pcre2_substitute() now sets the output buffer length to PCRE2_UNSET (~0)
if the output buffer is determined to be too small. This change keeps
track of the buffer size separately where pcre2 can't touch it.
A better fix would be to let pcre2 tell fish what size buffer it needs.
This can be done with PCRE2_SUBSTITUTE_OVERFLOW_LENGTH, but this
requires pcre2 10.21 or later (released January 12), which may be too
new to introduce as a dependency at this point.
Fixes#2743
I've run this more than twenty times through Travis CI (by adding/removing
a comment line). Without this tweak the longest sequence seems to be
around six successful runs.
Expand globs to zero arguments (nullglob) only for set, for and count.
The warning about failing globs, and setting the accompanying $status,
now happens regardless of mode, interactive or not.
It is assumed that the above commands are the common cases where
nullglob behaviour is desirable.
More importantly, doing this with `set` is a real feature enabler,
since the resulting empty array can be passed on to any command.
The previous behaviour was actually all nullglob (since commit
cab115c8b9), but this was undocumented;
the failglob warning was still printed in interactive mode,
and the documentation was bragging about failglob behaviour.
This changes the default escape timeout for the default keybindings (emacs
mode) to 300ms and the default for vi keybindings to 10ms.
I couldn't resist fixing a few nits in the fish_vi_key_bindings.fish file
since I was touching it to set the escape timeout.
My previous commit failed in the travis-ci environment despite passing on my
local computer. This appears to be due to expect timing out looking for the
expected input. See if increasing the expect timeout slightly fixes the
problem.
Introduce a "fish_escape_delay_ms" variable to allow the user to configure the
delay used when seeing a bare escape before assuming no other characters will
be received that might match a bound character sequence. This is primarily
useful for vi mode so that a bare escape character (i.e., keystroke) can
switch to vi "insert" to "normal" mode in a timely fashion.
This fails on e.g. an abbr that uses `env a=b`, like the included test demonstrates.
Unfortunately it decreases the speed again (2s vs 2.2s vs 4s original),
but correctness is more important.
The fix for #2075 inadvertently started unescaping the strings emitted
from `commandline -b`. Only strings emitted with the `-o` flag are
supposed to be unescaped.
Fixes#2210.
Previously 'set -ql' would only look for variables in the
immediate local scope. This was not very useful. It's also
arguably surprising, since a 'set -l' in a function, followed
by a 'set -ql' in a child block, would fail. There was also no
way to check for a function-scoped variable, since omitting the
scope would also pull in global variables.
We could revisit this and introduce an explicit function scope.
Fixes#2502
This isn't pretty, but it fails for, as far as I can see, no _real_
reason.
It doesn't seem to be possible to trigger the failure in real usage, no
matter how fast you press the ESC key followed by something else.
So now this is known and constant travis emails don't help it in any way.
When performing wildcard expansion with a literal path segment,
instead of enumerating the files in the directory, simply apply the
path segment as if we found the directory and continue on. This
enables us to expand strings that contain unreadable directory
components (common with $HOME) and also improves performance, since
we don't waste time enumerating directories unnecessarily. Adds
a test too.
Fixes#2099
Prior to this fix, if you exported a variable in one scope
and then unexported it in the next, it would remain exported.
Example:
set -gx VAR 1
function foo; set -l VAR; env; end
foo
Here 'VAR' would be exported to 'env' because we failed to
notice that the env var is shadowed by an unexported variable.
This occurred at env var computation time, not in env_set!
Fixes#2132
Before this fix, `function -a arg1 name1` would produce a
function named 'arg1'. After this fix, it will produce a
function named 'name'. See #2068 for more.
Before running a command, we add the command to history, so
that if the command causes us to exit it's still captured in
history. But that command should not be considered part of
history when expanding the history within the command itself.
For example, `echo $history[1]` should be the previously
run command, not `echo $history[1]` itself.
Fixes#2028
GNU and BSD `mktemp` handle options differently, and it's a useful
utility for tests. As such, define a common `mktemp` function wrapper
for the test suite.
It might actually be nice to expand this for more flags and support it
globally, but that may result in confusion for any users of BSD mktemp
that expect to be running /bin/mktemp.
Update the test runners so they set up their own environment in
test_util.fish. This simplifies the Makefile and paves the way for
adding utility functions for use in the tests themselves.
Prior to this change, inherited environment variables
would be split on colons, becoming an array. This change
eliminates that behavior. Now environment variables are
always split on the record separator character (ASCII 0x1e),
with the exception of a short whitelist of PATH, MANPATH,
CDPATH. Likewise, exported variables are also exported
delimited by rs, with the exception of the above whitelist.
Fixes#1374, also see #1656
We can't use $PATHS to test the :-splitting because the global config
file adds extra paths based on /etc/paths and /etc/paths.d.
Ideally fish would have a way to suppress behavior like that, but for
the time being it doesn't.
--inherit-variable takes a variable name and snapshots its current
value. When the function is executed, it will have a local variable with
this value already defined. Printing the function source will include
synthesized `set -l` lines for the values.
This is primarily useful for functions that are created on the fly, such
as in `psub`.
Instead of globally marking the state as "in block" when evaluating
blocks/functions, update the "in block" status when pushing/popping
blocks on the parser stack.
Fixes#1729.
On a side note, `status -b` is actually pretty useless, because it
always returns 0 inside of a function (even without this patch).
It seems expect prioritizes the first pattern in the list, instead of
the pattern that matches earliest in the buffer. That seems pretty
stupid, but let's try moving the prompt pattern to the end and see if
that fixes the Travis failures.
Also tweak colored output to reset before the newline instead of after,
so travis behaves better (for some reason reset causes travis to display
the line in black).
Split test_interactive off from test_fishscript and add a new target
test_high_level that tests both.
Add some Makefile magic so the tests can be run serially without using
sub-make, which gets rid of a little noise from the make output.
Rewrite interactive tests to look better.
U+F8FF is the last character in the private use area, but it's also the
codepoint used for the Apple symbol (), which is typeable on US
keyboards in OS X, and so should actually work.
The `--null` flag to `read` makes it split incoming lines on NUL instead
of newlines. This is intended for processing the output of a command
that uses NUL separators (such as `find -print0`).
Fixes#1694.
Directories are completed like commands, because of implicit cd.
However, directories found inside $PATH entries should not be completed,
as implicit cd doesn't work there. Similarly, directories should not be
completed after the `command` builtin.
Fixes#1695.
`exec` removes fish from the shell "stack", so SHLVL needs to be
decremented to match. This means `exec fish` will result in the same
SHLVL in the new fish instance.
Also tweak the SHLVL logic to interpret an environment SHLVL of "3foo"
as garbage instead of as the value "3".
Fixes#1693.
As far as I know we can't access the build artifacts from Travis, so we
can't check the interactive logs after a test failure. Add an
environment variable that causes the test runner to dump the logs
itself, and set that variable for Travis.
Split `make test` into two targets `make test_low_level` and `make
test_fishscript`, primarily so fishscript tests can be rechecked quickly
after edits.
Reformat the test.fish file and update some of the code to be a little
more straightforward (e.g. `if not cmd` instead of `if cmd; else`).
When $IFS is empty, command substitution no longer splits on newlines.
However we still want to trim off a single trailing newline, as most
commands will emit a trailing newline and it makes it harder to work
with their output.
The span now properly points at the token that was invalid, rather than
the start of the slice.
Also fix the span for `()[1]` and `()[d]`, which were previously
reporting no source location at all.
When a variable is parsed as being empty, parse out the slice and
validate the indexes anyway, behaving for slicing purposes as if the
variable had a single empty value.
Besides providing errors when expected, this also fixes the following:
set -l foo
echo "$foo[1]"
This used to print "[1]", now it properly prints nothing.
Double expansions of variables had the following issues:
* `"$$foo"` threw an error no matter what the value of `$foo` was.
* `set -l foo ''; echo $$foo` threw an error because of the expansion of
`$foo` to `''`.
With this change, double expansion always works properly. When
double-expanding a multi-valued variable, in a double-quoted string the
first word of the inner expansion is used for the outer expansion, and
outside of a quoted string every word is used for the double-expansion
in each of the arguments.
> set -l foo bar baz
> set -l bar one two
> set -l baz three four
> echo "$$foo"
one two baz
> echo $$foo
one two three four
Enhance the `read` builtin to support creating an array with the --array
flag. With --array, only a single variable name is allowed and the
entire input is tokenized and placed into that variable as an array.
Also add custom behavior if IFS is empty or unset. In that event, split
the input on every character, instead of the previous behavior of doing
no splitting at all.
One of the tests was using `>/dev/null` to suppress the `type` output.
That needs to be `^/dev/null` now, but instead just go ahead and use the
new `-q` flag.
This commit makes fish_parse_opt stop at first non-option argument,
which expected as fish script name and pass the remaining argument to
that script. I also updated the test cases.
