1. `this.chat.activeChannel = null` was being done in twice
2. using `willTransition()` and checking transition.to.name prefix for route cleanup rather than using `deactivate()` was unnecessarily verbose and could be premature (if something aborted the transition you'd end up in a broken state)
3. `activeChannel` on Chat service can be null, check for that before accessing
It's very hard to repro but under specific circumstances I suspect it was possible for this sequence to happen:
- set message TEXT
- cooking starts
- set message COOKED through another mean (like a message bus)
- the cooking started sooner finished and erases the cooked set at the step before causing the message to have the incorrect cooked
After removing `TextareaTextManipulation` from `ChatComposer` and using `TextareaInteractor` as a proxy, one function has been forgotten: `paste(event)` which is not available in glimmer components anymore, and even less avaiable now that the mixin is not tied to a component anymore but a real DOM node. As a solution we now add a manual paste event listener which will call `paste(event)`.
This pull request is a full overhaul of the chat-composer and contains various improvements to the thread panel. They have been grouped in the same PR as lots of improvements/fixes to the thread panel needed an improved composer. This is meant as a first step.
### New features included in this PR
- A resizable side panel
- A clear dropzone area for uploads
- A simplified design for image uploads, this is only a first step towards more redesign of this area in the future
### Notable fixes in this PR
- Correct placeholder in thread panel
- Allows to edit the last message of a thread with arrow up
- Correctly focus composer when replying to a message
- The reply indicator is added instantly in the channel when starting a thread
- Prevents a large variety of bug where the composer could bug and prevent sending message or would clear your input while it has content
### Technical notes
To achieve this PR, three important changes have been made:
- `<ChatComposer>` has been fully rewritten and is now a glimmer component
- The chat composer now takes a `ChatMessage` as input which can directly be used in other operations, it simplifies a lot of logic as we are always working a with a `ChatMessage`
- `TextareaInteractor` has been created to wrap the existing `TextareaTextManipulation` mixin, it will make future migrations easier and allow us to have a less polluted `<ChatComposer>`
Note ".chat-live-pane" has been renamed ".chat-channel"
Design for upload dropzone is from @chapoi
- Move the old '`define_include_method`' arg to a `respect_plugin_enabled` kwarg
- Introduce an `include_condition` kwarg which can be passed a lambda with inclusion logic. Lambda will be run via `instance_exec` in the context of the serializer instance
This is backwards compatible - old-style invocations will trigger a deprecation message
- Move the old '`define_include_method`' arg to a `respect_plugin_enabled` kwarg
- Introduce an `include_condition` kwarg which can be passed a lambda with inclusion logic. Lambda will be run via `instance_exec` in the context of the serializer instance
This is backwards compatible - old-style invocations will trigger a deprecation message
Update chat and poll plugins to new pattern
Further followup to 24ec06ff85,
where I prevented other chat scheduled jobs from running if
chat was disabled. We should not be running any plugin scheduled
jobs if that plugin is disabled, it can cause unexpected
behaviour.
This was reverted in 38cebd3ed5.
The issue was that I was using Discourse.redis.delete_prefixed
which does a slow redis KEYS lookup, which is not advised in
production. This commit removes that, and also ensures the periodical
thread count update only happens if threading is enabled.
I changed to use a redis INCR/DECR for reply count
cache. This avoids a round trip to redis to GET the current
count, and also avoids multi-process issues, where
if there's two processes trying to increment at the
same time, they may both receive the same value, add one
to it, then both write the same value back.
Then, it's only n+1 instead of n+2.
This also prevents almost all chat scheduled jobs from
running if chat is disabled, the only one remaining is
the message retention job.
This commit moves the category channel creation out
of the Chat::Api::Channel controller and into a
dedicated CreateCategoryChannel service. A follow up
commit will move the DM channel creation out of
the old DirectMessageChannelCreator service.
Also includes a new on_model_errors helper
for chat service class usage, that collects model
validation errors to present in a nice way.
---------
Co-authored-by: Loïc Guitaut <loic@discourse.org>
This adds these two new test cases:
context "when updating a mentioned user" do
it "updates the mention record" do
# and
context "when there are duplicate mentions" do
it "creates a single mention record per mention" do
Apart from that, this groups mention related tests into a context, renames one test, and moves setup of another test into the test case itself from the before block (to make it more clear, that test is the only one that uses that setup). See the PR's commit history.
Steps to reproduce the bug:
1. Send a chat message
2. Edit the message and add a mention to it
3. The mentioned user won't receive a notification
This PR fixes the problem.
Also:
1. There's no need anymore to have a code for removing notifications in the `notify_edit` method, because a call to `@chat_message.update_mentions` in the first line of the `notify_edit` method does that job:
ff56f403a2/plugins/chat/lib/chat/notifier.rb (L90)
2. There's no need to load mention records from database, it's enough to pluck user ids
Followup to bd5c5c4b5f, a
bug was introduced there for any channel that did not have
threading enabled or sites with the experimental threading
disabled. When the user replied to another chat message,
since this is always a thread in the background, we weren't
sending any MessageBus messages to the main channel, since
the message was a thread reply.
However in the UI these messages still show in the main stream
of the channel if threading is turned off, so the UI was not
reacting to these things happening in the backend. The worst
issue was that new clients would not see new replies sent in
reply to other messages in the channel.
This reverts commit 768851920e.
This was causing issues with the local date popup, cutting off
the top of it, there is no way to overrule an overflow:hidden
on the parent. Not z-index related.
This is to help generate random channels and chat
messages for local dev. This was removed in 12a18d4d55
presumably because it was not worth refactoring at the
time.
I've only added these tasks:
- `rake chat:message:populate\[113,20\]` (channel_id, count)
- Generates the count of messages for a channel ID provided,
otherwise uses a random channel and 200 count.
- `rake chat:category_channel:populate`
- Creates a chat channel for a random category.
- `rake chat🧵populate\[132,5\]` (channel_id, message_count)
- Creates a thread with N messages in the specified channel,
and enables threading in that channel if necessary
This commit fixes an issue where if you pressed a format
shortcut (e.g. bold, italic, code) for the composer and
you had the thread panel open as well, the shortcut would
trigger in both composers, not just the one that was focused.
We currently don't have a nice UI to show unread messages for the thread,
and it will take some time to create one. For now, this commit makes it so
new messages inside a thread do not count towards a chat channel's unread
counts, and new messages sent in a thread do not update a user's `last_read_message_id`
for a channel.
In addition, this PR refactors the `Chat::ChannelFetcher` to use the `Chat::ChannelUnreadsQuery`
query class for consistency, and made said class able to return zeroed-out records
for channels the user is not a member of.
Finally, a small bug is fixed here where if a user's `last_read_message_id` for
a channel was a thread's OM ID, then the thread OM would not show in the
main channel stream for them until another reply to the channel was posted.
We've found these exceptions in logs:
Job exception: undefined method `destroy!' for nil:NilClass
/var/www/discourse/plugins/chat/lib/chat/notifier.rb:102:in `block in notify_edit'
/var/www/discourse/plugins/chat/lib/chat/notifier.rb💯in `each'
/var/www/discourse/plugins/chat/lib/chat/notifier.rb💯in `notify_edit'
/var/www/discourse/plugins/chat/app/jobs/regular/chat/send_message_notifications.rb:18:in `execute'
In the past, we were creating `chat_mention` records only for sending notifications, so every mention record had a related notification. It isn't the case anymore (since fa543cda). This PR fixes the problem by making sure the notification exists before trying to remove it. Also, we shouldn't be deleting a `chat_mention` record itself, only a notification, this PR fixes that too.
It's quite hard to reproduce this bug locally, I wasn't able to do so, the logic in this class is quite complicated, that's why I'm not adding a test. Also, when looking at this I realized that this method isn't in a fully correct state now, I suspect sometimes some notifications may not be delivered after someone edits a chat message and adds new mentions to it. I'm going to refactor and simplify the method in a subsequent PR.
This commit introduces a redis cache over the top of the thread
replies_count DB cache, so that we can quickly and accurately
increment/decrement the reply count for all users and not have
to constantly update the database-level count. This is done so
the UI can have a count that is displayed to the users on each
thread indicator, that appears to live update on each chat
message create/trash/recover inside the thread.
This commit also introduces the `Chat::RestoreMessage` service
and moves the restore endpoint into the `Api::ChannelMessages`
controller as part of incremental migrations to move things out
of ChatController.
Finally, this commit refactors `Chat::Publisher` to be less repetitive
with its `MessageBus` sending code.
Followup to bd5c5c4b5f,
this commit hooks up the bulk delete events for chat
messages inside the thread panel, by fanning out the
deleted message IDs based on whether they belong to
a thread or not.
Also adds a system spec to cover this case, as previously
the bulk delete event would have been broken with an incorrect
`typ` rather than `type` hash key.
This error was only happening on mobile, note we also already have a (mobile) test (plugins/chat/spec/system/transcript_spec.rb:184) for this which was passing as it's only happening at a specific speed. I don't want to complicate the test too much for this case, will reconsider if it regresses again.
Currently, some links aren’t properly built in Discobot when Discourse
is hosted in a subfolder. This is because we’re providing
`Discourse.base_url` to the Rails helpers which contains the base URL
*with* the prefix. But Rails helpers already handle this prefix so the
resulting link gets the prefix twice.
The fix is quite simple: use `Discourse.base_url_no_prefix` instead of
`Discourse.base_url`.
Followup to ba11cf4767,
this commit makes it so that none of the chat message
thread data is serialized if threading_enabled is false
for the channel or if enable_experimental_chat_threaded_discussions
is false, there is no need to serialize the data in this
case.
This regression happened in bd5c5c4b5f and is due to `message_bus_targets = calculate_publish_targets(chat_channel, chat_message)` expecting a `chat_channel` which was only defined after.
Example exception in logs:
```
Job exception: undefined local variable or method `chat_channel' for Chat::Publisher:Module
/var/www/discourse/plugins/chat/app/services/chat/publisher.rb:91:in `publish_processed!'
/var/www/discourse/plugins/chat/app/jobs/regular/chat/process_message.rb:21:in `block in execute'
/var/www/discourse/lib/distributed_mutex.rb:53:in `block in synchronize'
/var/www/discourse/lib/distributed_mutex.rb:49:in `synchronize'
/var/www/discourse/lib/distributed_mutex.rb:49:in `synchronize'
/var/www/discourse/lib/distributed_mutex.rb:34:in `synchronize'
/var/www/discourse/plugins/chat/app/jobs/regular/chat/process_message.rb:7:in `execute'
/var/www/discourse/app/jobs/base.rb:249:in `block (2 levels) in perform'
```
This commit also:
- adds a spec to ensure oneboxing is not regressing anymore
- increment the version on message processed to ensure callbacks are correctly ran
Note we should also have more tests in `Chat::Publisher`, this will be done when we move it to a proper service.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
It is yet to investigate the exact reasons leading to this, but probably due to some delete operation or migration, it seems possible to have a message with a thread_id leading to a non existing thread row. This is only a temporary solution to prevent the crash. We should also probably be more defensive here and not include any of this if threading is not enabled.
This codepath was responsible to scroll to the first emoji of a section, however `scrollIntoView` was not super reliable and was also causing the whole page to scroll with drawer. This is also simply not necessary code as native focus behavior will scroll to the element.
This commit introduces a ChatChannelPaneSubscriptionsManager
and a ChatChannelThreadPaneSubscriptionsManager that inherits
from the first service that handle MessageBus subscriptions
for the main channel and the thread panel respectively.
This necessitated a change to Chat::Publisher to be able to
send MessageBus messages to multiple channels based on whether
a message was an OM for a thread, a thread reply, or a regular
channel message.
An initial change to update the thread indicator with new replies
has been done too, but that will be improved in future as we have
more data to update on the indicators.
Still remaining is to fully move over the handleSentMessage
functionality which includes scrolling and new message indicator
things.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
When we "pull hotlinked images" on onebox images, they are added to the uploads table and their dominant color is calculated. This commit adds the data to the HTML so that it can be used by the client in the same way as non-onebox images. It also adds specific handling to the new `discourse-lazy-videos` plugin.
- Back button in drawer will bring you back to channel
- Larger font for thread indicator
- Prevents screen flashing due to clearing messages when they were already loaded
- Fixes a bug where did-update params were inverted causing an error when expanding/collapsing drawer
This feature will allow sites to define which emoji are not allowed. Emoji in this list should be excluded from the set we show in the core emoji picker used in the composer for posts when emoji are enabled. And they should not be allowed to be chosen to be added to messages or as reactions in chat.
This feature prevents denied emoji from appearing in the following scenarios:
- topic title and page title
- private messages (topic title and body)
- inserting emojis into a chat
- reacting to chat messages
- using the emoji picker (composer, user status etc)
- using search within emoji picker
It also takes into account the various ways that emojis can be accessed, such as:
- emoji autocomplete suggestions
- emoji favourites (auto populates when adding to emoji deny list for example)
- emoji inline translations
- emoji skintones (ie. for certain hand gestures)
This commit introduces a new thread indicator for channels with `threading_enabled`
set to true and the `enable_exp` site setting set to true. In addition, in the main channel
stream we now hide all messages that are linked to threads except for the original message,
disabling the concept of an "echo mode" for now, we may revisit this in future. We also
remove the jigsaw puzzle "Open Thread" button for message actions, since the thread
indicator can just be used instead.
This also stops the `Chat::Publisher` from sending any messages related to chat
messages that are linked to a thread, unless that chat message is the OM of the
thread. A subsequent PR will link up all MessageBus events within the thread panel,
and for the message indicators.
Another subsequent PR will add the excerpt of the latest message in each thread,
as well as the avatars of the users messaging in the thread.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
- rounded active style for messages
- better active state on chat message actions rows
- ensures long press on a message is not selecting text
- slightly improved messages actions animation and background fading
- ensures chat emoji picker is not cutoff on right side
- removes old legacy code related to hovered message
Similar to 22a55ef0ce,
this commit adds a replies_count to the Chat::Thread
table, which is updated every 15 minutes via PeriodicalUpdates.
This is done so the new thread indicator for the UI can
show the count without intense serializer queries, but
in future we likely want this to update more frequently.
Followup to c1dc6a2db4,
this commit just missed removing one of the @computed
decorators which was causing multiple active channels
to show in the sidebar. Fix the issue and introduce a
system spec to catch this.
- clicking empty area on the header will toggle collapse/expand it
- applies a background on hover of the channel title
- active state for small buttons
- the back button now has the correct icon color when hovered
- adds missing focus state for heade buttons icons
When hovering the chat message actions we are technically not hovering the message anymore, which was removing the background and is slightly unexpected. This commit ensures we keep this background until closing the message actions.
This PR primarily fixes this case:
- USER A message
- USER B message
- USER B reply to USER A message <-- not showing user info when it should
Moreover, this commit also improves the spec to correctly test more cases.
This commit is a major overhaul of how chat message actions work, to make it so they are reusable between the main chat channel and the chat thread panel, as well as many improvements and fixes for the thread panel.
There are now several new classes and concepts:
* ChatMessageInteractor - This is initialized from the ChatMessage, ChatMessageActionsDesktop, and ChatMessageActionsMobile components. This handles permissions about what actions can be done for each
message based on the context (thread or channel), handles the actions themselves (e.g. copyLink, delete, edit),
and interacts with the pane of the current context to modify the UI
* ChatChannelThreadPane and ChatChannelPane services - This represents the UI context which contains the
messages, and are mostly used for state management for things like message selection.
* ChatChannelThreadComposer and ChatChannelComposer - This handles interaction between the pane, the
message actions, and the composer, dealing with reply and edit message state.
* Scrolling logic for the messages has now been moved to a helper so it can be shared between the main channel pane and the thread pane
* Various improvements with the emoji picker on both mobile and desktop. The DOM node of each component is now located outside of the message which prevents a large range of issues.
The thread panel now also works in the chat drawer, and the thread messages have less
actions than the main panel, since some do not make sense there (e.g. moving messages to
a different channel). The thread panel title, excerpt, and message sender have also been removed
for now to save space.
This gives us a solid base to keep expanding on and fixing up threads. Subsequent PRs will
make the thread MessageBus subscriptions work and disable echo mode
for the initial release of threads.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This commit adds a system to generate CSS variables and classes for categories
and hashtags, which will be used in an effort to remove baked icons for hashtags
and add color to those icons.
This is in two parts. First I added an initializer generate a category color CSS
variable style tag in the head tag that looks like this:
```css
:root {
--category-1-color: #0088CC;
--category-2-color: #808281;
--category-3-color: #E45735;
--category-4-color: #A461EF;
--category-5-color: #ee56c9;
--category-6-color: #da28c2;
--category-7-color: #ab8b0a;
--category-8-color: #45da37;
...
}
```
The number is the category ID. This only generates CSS variables for categories
the user can access based on `site.categories`. If you need the parent color variable
you can just use the `category.parentCategory.id` to get it.
Then, I added an initializer to generate a hashtag CSS style tag using these variables.
Only the category and channel hashtags need this, the category one generates the
background-gradient needed for the swatch, and the channel just generates a color
for the icon. This is done in an extendable way using the new `api.registerHashtagType`
JS plugin API:
```css
hashtag-color--category-1 {
background: linear-gradient(90deg, var(--category-1-color) 50%, var(--category-1-color) 50%);
}
hashtag-color--category-2 {
background: linear-gradient(90deg, var(--category-2-color) 50%, var(--category-2-color) 50%);
}
hashtag-color--category-5 {
background: linear-gradient(90deg, var(--category-5-color) 50%, var(--category-4-color) 50%);
}
...
.hashtag-color--channel-4 {
color: var(--category-12-color);
}
.hashtag-color--channel-92 {
color: var(--category-24-color);
}
```
Note if a category has a parent, its color is used in the gradient correctly. The numbers
here are again IDs (e.g. channel ID, category ID) and the channel’s chatable ID is used
to find the category color variable.
The translation key is built using the name of the reviewable as it was
defined in Ruby. The chat plugin uses the `Chat` namespace and defines
`Chat::ReviewableMessage`. This was then transformed to
`chat::reviewable_message`, but it should be `chat_reviewable_message`
to resemble the other translation keys.
When a chat message is trashed and the message is used
for someone's UserChatChannelMembership#last_read_message_id,
the user would end up with some read state issues until
someone posted a new message in the channel, since we didn't
clear it like we did on bulk message delete.
This commit fixes the issue, and also takes the opportunity
to start a MessagesController in the API namespace, and move
the trash message functionality into the new service format.
Followup to 0924f874bd,
we migrated Chat::Upload records to UploadReference records
there and have not been making new Chat::Upload records
for some time, we can now delete the model and table.
- Raises the scroll distance to 250px instead of 100px to show the arrow down button
- Always have a margin on drawer when showing channel list, removes this margin when the scrollbar is apparent
- Makes all scrollbar used in chat look the same through the chat-scrollbar mixin
- Ensures hover state is not persistent on channel row in mobile
- Makes the channel row full width on mobile
We keep getting this failure on the spec but I
cannot reproduce locally, add this extra log line
to see if it helps:
```
> Chat::Api::ChatablesController#index with chat permissions does not return DM channels for users who are not in the chat allowed group
> Failure/Error: example.run
>
> expected: 200
> got: 500
>
> (compared using ==)
> # ./plugins/chat/spec/requests/chat/api/chatables_controller_spec.rb:158:in `block (4 levels) in <main>'
> # ./spec/rails_helper.rb:358:in `block (2 levels) in <top (required)>'
> # ./vendor/bundle/ruby/3.2.0/gems/webmock-3.18.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
> # ------------------
> # --- Caused by: ---
> #
> # expected: 200
> # got: 500
> #
> # (compared using ==)
> # ./plugins/chat/spec/requests/chat/api/chatables_controller_spec.rb:158:in `block (4 levels) in <main>'
```
This adds specs to the mentioned serializers to catch regressions
with MessageBus last_ids and to ensure the correct ones are being
returned and passed down to the ChannelSerializer.
Followup to d8ad5c3
Followup to 3ea8df4b06,
I forgot to wrap the call to Chat::Publisher.root_message_bus_channel(object.chat_channel.id)
in MessageBus.last_id, so the channel_message_bus_last_id key was
ending up as e.g. "/chat/58" instead of the last ID value.
We noticed via profiling that chat was doing N redis calls
per channel. Part of this was from the kick_message_bus_last_id
from 520d4f504b being incorrectly
passed down for DM channels rather that public channels, and the
other part was from the root MessageBus channel last_id
being fetched in ChannelSerializer for every single channel.
This commit fixes both issues, for me going from 134 redis calls
on page load to 20 locally.
Also deletes an old file missed in 12a18d4d55
Followup cab4b2cfba,
this was causing client JS errors because the old version
of the client was expecting the old keys, but the new
ruby version of the app was sending different keys via
the MessageBus payload. We can remove this in a couple
of weeks.
This commit introduces a Chat::Publisher and MessageBus endpoint
that allows for updating a user's channel tracking state in bulk for
multiple channels, rather than having to do it for one channel
at a time.
This also required an improvement to ChannelUnreadsQuery -- now
multiple channel IDs can be passed to this to get the unread counts
and mention counts for those channels for a user, also increasing
efficiency rather than having to do a query for every individual
channel.
Followup to #20802
Instead of just marking the state read in JS for each channel
after the AJAX call, we can instead just rely on the MessageBus
user-tracking-state chat channel, and publish the state to all
the channels affected in MarkAllUserChannelsRead. This will make
it so the blue dots for the channels are cleared across all tabs.
This manual set was happening only after the request so was not much faster than just waiting on message bus update. It's not by itself changing any behavior or fixing any bug but it makes reasoning about the whole state easier as it happens in only one central place.
Followup to a0381157e9, we just
need to make sure we set currentUserMembership.last_read_message_id
to the last_read_message_id from the updated memberships after marking
all channels read, otherwise we do not scroll to the bottom and still
show the "last visit" separators in channels that have been
marked read.
This commit adds a keyboard shortcut (Shift+ESC) for chat which marks all
of the chat channels that the user is currently a following member of as read,
updating their `last_read_message_id`. This is done via a new service.
It also includes some refactors and controller changes:
* The old mark message read route from `ChatController` is now supplanted
by the `Chat::Api::ReadsController#update` route.
* The new controller can handle either marking a single or all messages read,
and uses the correct service based on the route and params.
* The `UpdateUserLastRead` service is now used (it wasn't before), and has been slightly
updated to just use the guardian user ID.
These were added in 7dd317b875
but are now consistently failing with described_class.chat_summary(user, {})
returning nil. Skipping for now because they are holding up other
things.
To reproduce failure run:
RSPEC_SEED=46586 bundle exec rake plugin:spec
There are many situations that may cause users to lose permission to
send messages in a chat channel. Until now we have relied on security
checks in `Chat::ChatChannelFetcher` to remove channels which the
user may have a `UserChatChannelMembership` record for but which
they do not have access to.
This commit takes a more proactive approach. Now any of these following
`DiscourseEvent` triggers may cause `UserChatChannelMembership`
records to be deleted:
* `category_updated` - Permissions of the category changed
(i.e. CategoryGroup records changed)
* `user_removed_from_group` - Means the user may not be able to access the
channel based on `GroupUser` or also `chat_allowed_groups`
* `site_setting_changed` - The `chat_allowed_groups` was updated, some
users may no longer be in groups that can access chat.
* `group_destroyed` - Means the user may not be able to access the
channel based on `GroupUser` or also `chat_allowed_groups`
All of these are handled in a distinct service run in a background
job. Users removed are logged via `StaffActionLog` and then we
publish messages on a per-channel basis to users who had their
memberships deleted.
When the user has a channel they are kicked from open, we show
a dialog saying "You no longer have access to this channel".
When they click OK we redirect them either:
* To their first other public channel, if they have any followed
* The chat browse page if they don't
This is to save on tons of requests from kicked out users getting messages
from other channels.
When the user does not have the kicked channel open, we can just
silently yoink it out of their sidebar and turn off subscriptions.
This refactoring simplifies ChatNotifier a bit. I wanted to drop
that argument for expand_direct_mentions too, but that needs
a bit deeper refactoring, so it's better to do it separately.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
Prior to this fix, we wouldn't display reactions done on different tabs. So, if user A was reacting on tab 1, tab 2 wouldn't display this reaction.
Since few weeks ago we now have the guarantee to have uniq reactions on a message which should prevent any duplicate.
This commit also removes various skipped tests related to reactions and makes `sign_in` explicit at the beginning of each test.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
This commit takes advantage of the `ResizeObserver` to know when dates should be re-computed, it works like this:
```
scrollable-div
-- child-enclosing-div with resize observer
---- message 1
---- message 2
---- message x
```
It also switches to bottom/height for date separators sizing, instead of bottom/top, it prevents a bug where setting the top of the first item (at the top) would cause scrollbar to move to top.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
This commit does a couple of things:
* Adds the ability to load messages in the chat thread panel when it is open. This just loads the most recent N messages, same as a channel, and does nothing more, no scrolling or anything like that.
* Displays the messages in an extremely simple unordered list with no additional features.
* Allows posting new messages to the thread, and echoes them into the main channel, but does not respond to any sort of MessageBus events.
I've moved messages/clearMessages/addMessages/findMessage code out of the `ChatChannel` model
and into a new `ChatMessagesManager` class, which is instantiated in both the `ChatChannel` model
and the `ChatThread` model. This allows both to manage messages in the same way via the
`TrackedArray` pattern.
This is all hidden behind experimental flags, there is no way to make this not completely broken
in a single commit. Much more work and refactoring needs to be done first.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This behavior is hard to test as it's mostly fixing a race condition: User A sends a message at the same time than User B, which as a result doesn't cause a scroll for the second message and we don't update last read unless we do a small up and down scroll.
`updateLastRead` is debounced so it has no direct consequences to call it slightly more often than what should ideally be needed.
Prior to this fix, the upload was removed from DOM when collapsed and not decorated again on expand, which was causing lightbox to not get reapplied. The fix is reverting to previous state where content was not removed from DOM.
Prior to this change `registered_bookmarkable` would return `nil` as `type` in `Bookmark.registered_bookmarkable_from_type(type)` would be `ChatMessage` and we registered a `Chat::Message` class.
This commit will now properly rely on each model `polymorphic_class_for(name)` to help us infer the proper type from a a `bookmarkable_type`.
Tests have also been added to ensure that creating/destroying chat message bookmarks is working correctly.
---
Longer explanation
Currently when you save a bookmark in the database, it's associated to another object through a polymorphic relationship, which will is represented by two columns: `bookmarkable_id` and `bookmarkable_type`. The `bookmarkable_id` contains the id of the relationship (a post ID for example) and the `bookmarkable_type` contains the type of the object as a string by default, (`"Post"` for example).
Chat plugin just started namespacing objects, as a result a model named `ChatMessage` is now named `Chat::Message`, to avoid complex and risky migrations we rely on methods provided by rails to alter the `bookmarkable_type` when we save it: we want to still save it as `"ChatMessage"` and not `"Chat::Message"`. And, to retrieve the correct model when we load the bookmark from the database: we want `"ChatMessage"` to load the `Chat::Message` model and not the `ChatMessage`model which doesn't exist anymore.
On top of this the bookmark codepath is allowing plugins to register types and will check against these types, so we alter this code path to be able to do a similar ChatMessage <-> Chat::Message dance and allow to check the type is valid. In the specific case of this commit, we were retrieving a `"ChatMessage"` bookmarkable_type from the DB and looking for it in the registered bookmarkable types which contain `Chat::Message` and not `ChatMessage`.
This commit main goal was to comply with Zeitwerk and properly rely on autoloading. To achieve this, most resources have been namespaced under the `Chat` module.
- Given all models are now namespaced with `Chat::` and would change the stored types in DB when using polymorphism or STI (single table inheritance), this commit uses various Rails methods to ensure proper class is loaded and the stored name in DB is unchanged, eg: `Chat::Message` model will be stored as `"ChatMessage"`, and `"ChatMessage"` will correctly load `Chat::Message` model.
- Jobs are now using constants only, eg: `Jobs::Chat::Foo` and should only be enqueued this way
Notes:
- This commit also used this opportunity to limit the number of registered css files in plugin.rb
- `discourse_dev` support has been removed within this commit and will be reintroduced later
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
Mentions are now displayed as using the non-cooked message which fixes
the problem. This is not ideal. I think we might want to rework how
these excerpts are created and rendered in the near future.
Co-authored-by: Jan Cernik <jancernik12@gmail.com>
Non-markdown tags weren't being escaped in chat excerpts. This could be
triggered by editing a chat message containing a tag (self XSS), or by
replying to a chat message with a tag (XSS).
Co-authored-by: Jan Cernik <jancernik12@gmail.com>
This regressed with the commit fa543cd. Starting from that commit, we create mention records even if a user shouldn't be notified. So when sending emails, we should be making sure if a notification was actually created for a mention. This is essentially the whole fix that we need here. Tests will be provided in a following PR.
Usage:
```javascript
api.addChatDrawerStateCallback(({ isDrawerActive, isDrawerExpanded }) => {
// do something
});
```
Note this commit also uses this new API to add a css class (chat-drawer-active) on the body when the drawer is active.
This fix uses direct `scrollTop` manipulation instead of `scrollIntoView` when we are certain we actually want the bottom of the screen. This avoids a range of issues especially in safari but also chrome where the scroll position was not correct at the end of `scrollIntoView`, especially due to images.
This is just a little clean-up in tests. In the past, when creating a `chat_mention`
record, we always created a related notification. Starting from fa543cda
notifications and chat_mentions are fully decoupled from each other. So if we're
testing just chat mentions there is no need to fabricate notifications for them.
* DEV: Change sidebar header dropdown to use wait_for_animation
Introduced in 54351e1b8a, this
helper should remove the need to have to add the .animated
CSS class in JS for the sidebar.
* DEV: Revert spec change
`create_notification!` - creates a notification in the database, `send_notifications` sends desktop and mobile notifications. This PR moves some code to decouple these two tasks more explicitly. It only moves code without changing any behavior, and the job is covered with tests (see chat_notify_mentioned_spec).
- Will consider a message read only one the bottom of the message has been read
- Will allow to mark a message bigger than the view port as read
- Code should be more performant as the scroll is doing less (albeit more often)
- Gives us a very precise scroll state. Problem with throttling scroll is that you could end up never getting the even where scrollTop is at 0, opening a whole range of edge cases to handle
1. Restore the left margin on both (which reflects the right margin of the scroll bar space)
2. Fix the center alignment of scroll-to-bottom icon
3. Fix the spacing of the `-` character between a date label and "last visit" label
4. Fix the incorrect display the border on date label when at the bottom of viewport
When we introduced `existingUploads` as an arg to the
ChatComposerUploads component, we also introduced a bug where
if multiple uploads were being done at once, and the draft
was saved, then because of didReceiveAttrs we would cancel
the currently uploading files because the draft uploads became
the existingUploads.
To work around this, since we do want to keep this on didReceiveAttrs
for cases when the user opens a draft or edits another message,
the easiest thing to do is to just not save uploads into the chat
draft if there are still uploads in progress. That way only when
all uploads are complete do we make them a part of the draft.
There is a small risk that the user could do something to lose
their uploads in the draft, but it's a better gamble to have
that happen rather than in progress uploads to be cancelled
while the user is waiting for them to be done because of the
draft.
Also changes the uploads system spec back to the old way of
attaching multiple files since that is why it was failing.
This is used when calling click_message_action_mobile to wait
for the message actions menu to finish animating up before
attempting to click on it using capybara. Without this, in
the time between capybara getting the x,y position of a menu
item to click on and the click being fired, the animating menu
can move that item out of the way.
With the new helper, we constantly compare x,y client rect positions
for the animating element and wait for them to stabilise. Once they
do, it means the animation is done, and it is safe to click on
anything within the element.
Re-enables mobile system specs for chat that were ignored because
of this.
Similar spirit to e195e6f614,
this moves the Bookmarkable registration to DiscoursePluginRegistry
so plugins which are not enabled do not register additional
bookmarkable classes.
Before this commit, we created a chat mention record only in case we wanted to send a notification about that mention to the user. Notifications were the only use case for the chat_mention db table. Now we want to use that table for other features, so we have to always create a chat_mention record.
- group writes when computing separators positions
- shows skeleton only on initial load
- forces date separator to be pinned when first message to prevent a pinned - not pinned - pinned sequence when loading more in past
- relies on `message.visible` property instead of checking `isElementInViewport`
- attempts to load next/prev messages earlier
- do not scroll to on fetch more
- hides `last visit` text while pinned
Note this test my prove to be flakey, so I might have to remove it or find a different solution. It's extremely complicated to test for something which shouldn't appear in a period of time and is not a present at T=0
This was possible due to specific events which are hard to represent in a test. The provided test is as close as possible to what was happening in production: a message bus event was played on a channel which has just loaded its state with the existing reaction.
On require login sites, the `site` is not setup and as a result `hashtag_configurations` was blank and causing an error when attempting to access `["chat-composer"]` on it.
This PR is introducing glimmer usage in the chat-live-pane, for components but also for models. RestModel usage has been dropped in favor of native classes.
Other changes/additions in this PR:
sticky dates, scrolling will now keep the date separator of the current section at the top of the screen
better unread management, marking a channel as unread will correctly mark the correct message and not mark the whole channel as read. Tracking state will also now correctly return unread count and unread mentions.
adds an animation on bottom arrow
better scrolling behavior, we should now always correctly keep the scroll position while loading more
reactions are now more reactive, and will update their tooltip without needed to close/reopen it
skeleton has been improved with placeholder images and reactions
when making a reaction on the desktop message actions, the menu won't move anymore
simplify logic and stop maintaining a list of unloaded messages
The implementation previously generated a descriptor with an `initializer()`, and bound the function to the `this` context of the initializer. In native class syntax, the initializer of a descriptor is only called once, with a `this` context of the constructor, not the instance.
This commit updates the implementation so that it generates the bound function on-demand using a getter. This is the same strategy employed by ember's built-in `@action` decorator.
Unfortunately, this use of a getter means that the `@observes` decorator does not support being directly chained to `@debounce`. It throws the error "`observer must be provided a function or an observer definition`". The workaround is to put the observer on its own function, which then calls the debounced function. Given that we're aiming to reduce our usage of `@observes`, we've accepted the need for this workaround rather than spending the time to patch the implementation of `@observes`.
This PR is introducing glimmer usage in the chat-live-pane, for components but also for models. RestModel usage has been dropped in favor of native classes.
Other changes/additions in this PR:
- sticky dates, scrolling will now keep the date separator of the current section at the top of the screen
- better unread management, marking a channel as unread will correctly mark the correct message and not mark the whole channel as read. Tracking state will also now correctly return unread count and unread mentions.
- adds an animation on bottom arrow
- better scrolling behavior, we should now always correctly keep the scroll position while loading more
- reactions are now more reactive, and will update their tooltip without needed to close/reopen it
- skeleton has been improved with placeholder images and reactions
- when making a reaction on the desktop message actions, the menu won't move anymore
- simplify logic and stop maintaining a list of unloaded messages
* UX: add type tag and design update
* UX: clarify status copy in reviewQ
* DEV: switch to selectKit
* UX: color approve/reject buttons in RQ
* DEV: regroup actions
* UX: add type tag and design update
* UX: clarify status copy in reviewQ
* Join questions for flagged post with "or" with new I18n function
* Move ReviewableScores component out of context
* Add CSS classes to reviewable-item based on human type
* UX: add table header for scoring
* UX: don't display % score
* UX: prefix modifier class with dash
* UX: reviewQ flag table styling
* UX: consistent use of ignore icon
* DEV: only show context question on pending status
* UX: only show table headers on pending status
* DEV: reviewQ regroup actions for hidden posts
* UX: reviewQ > approve/reject buttons
* UX: reviewQ add fadeout
* UX: reviewQ styling
* DEV: move scores back into component
* UX: reviewQ mobile styling
* UX: score table on mobile
* UX: reviewQ > move meta info outside table
* UX: reviewQ > score layout fixes
* DEV: readd `agree_and_keep` and fix the spec tests.
* Fix the spec tests
* fix the quint test
* DEV: readd deleting replies
* UX: reviewQ copy tweaks
* DEV: readd test for ignore + delete replies
* Remove old
* FIX: Add perform_ignore back in for backwards compat
* DEV: add an action alias `ignore` for `ignore_and_do_nothing`.
---------
Co-authored-by: Martin Brennan <martin@discourse.org>
Co-authored-by: Vinoth Kannan <svkn.87@gmail.com>
This PR is introducing glimmer usage in the chat-live-pane, for components but also for models. RestModel usage has been dropped in favor of native classes.
Other changes/additions in this PR:
- sticky dates, scrolling will now keep the date separator of the current section at the top of the screen
- better unread management, marking a channel as unread will correctly mark the correct message and not mark the whole channel as read. Tracking state will also now correctly return unread count and unread mentions.
- adds an animation on bottom arrow
- better scrolling behavior, we should now always correctly keep the scroll position while loading more
- reactions are now more reactive, and will update their tooltip without needed to close/reopen it
- skeleton has been improved with placeholder images and reactions
- when making a reaction on the desktop message actions, the menu won't move anymore
- simplify logic and stop maintaining a list of unloaded messages
This commit allows the user to set their preference vis-a-vis
the chat icon in the header of the page. There are three options:
- All New (default) - This maintains the existing behaviour where
all new messages in the channel show a blue dot on the icon
- Direct Messages and Mentions - Only show the green dot on the
icon when you are directly messaged or mentioned, the blue dot
is never shown
- Never - Never show any dot on the chat icon, for those who
want tractor-beam-laser-focus
Initially, the chat_mention db table was created to support notifications. So when creating
a `chat_mention` record we were always creating a related `notification` record. So did the
ChatMention fabricator.
Now we want to use the chat_mention db table in other scenarios. So we started decoupling
mentions from notification in 75b81b68.
This removes fabrication of Notifications from the ChatMention fabricator. We need to be able
to fabricate a ChatMention without a Notification.
This patch introduces a new `ServiceJob` class allowing the use of
`with_service` in jobs.
This way, it’s easier to use the chat service objects in jobs and
provides the same level of functionality than the one we have in
controllers.
Fixes issue introduced in 7ef482a292
where the correct warning message was not shown when enabling auto-join
for public categories when creating a channel. Adds more system specs
as well to avoid regressions.
* UX: replace highlight vars in popup menu
* UX: replace highlight vars in autcomplete
* UX: replace highlight vars in menu-panel
* UX: update style guide
* UX: bulk replace highlight vars in various small appearances
**This PR creates a new core reusable component wraps a character counter around any input.**
The component accepts the arguments: `max` (the maximum character limit), `value` (the value of text to be monitored).
It can be used for example, like so:
```hbs
<CharCounter @max="50" @value={{this.charCounterContent}}>
<textarea
placeholder={{i18n "styleguide.sections.char_counter.placeholder"}}
{{on "input" (action (mut this.charCounterContent) value="target.value")}}
class="styleguide--char-counter"></textarea>
</CharCounter>
```
**This PR also:**
1. Applies this component to the chat plugins edit channel's *Edit Description** modal, thereby replacing the simple text area which provided no visual indication when text exceeded the max allowed characters.
2. Adds an example to the `/styleguide` route
* FIX: Use pluralized string
* REFACTOR: Fix misuse of pluralized string
* REFACTOR: Fix misuse of pluralized string
* DEV: Remove linting of `one` key in MessageFormat string, it doesn't work
* REFACTOR: Fix misuse of pluralized string
This also ensures that the URL works on subfolder and shows the site setting link only for admins instead of staff. The string is quite complicated, so the best option was to switch to MessageFormat.
* REFACTOR: Fix misuse of pluralized string
* FIX: Use pluralized string
This also ensures that the URL works on subfolder and shows the site setting link only for admins instead of staff.
* REFACTOR: Correctly pluralize reaction tooltips in chat
This also ensures that maximum 5 usernames are shown and fixes the number of "others" which was off by 1 if the current user reacted on a message.
* REFACTOR: Use translatable string as comma separator
* DEV: Add comment to translation to clarify the meaning of `%{identifier}`
* REFACTOR: Use translatable comma separator and use explicit interpolation keys
* REFACTOR: Don't interpolate lowercase channel status
* REFACTOR: Fix misuse of pluralized string
* REFACTOR: Don't interpolate channel status
* REFACTOR: Use %{count} interpolation key
* REFACTOR: Fix misuse of pluralized string
* REFACTOR: Correctly pluralize DM chat channel titles
The error was:
```
Failures:
1) Chat::Endpoint.call(service, &block) when using the on_failed_contract action when the service contract does not fail does not run the provided block
Failure/Error: subject(:endpoint) { described_class.call(service, controller, &actions_block) }
NoMethodError:
private method `run' called for #<SuccessContractService:0x000000011e3b28a0 @initial_context={"guardian"=>nil}, @context=#<Chat::Service::Base::Context guardian=nil, __steps__=[#<Chat::Service::Base::ContractStep:0x000000011de51230 @name=:default, @method_name=:default, @class_name=SuccessContractService::Contract, @default_values_from=nil>]>>
# ./plugins/chat/app/services/base.rb:305:in `call'
# ./plugins/chat/app/helpers/with_service_helper.rb:20:in `run_service'
# ./plugins/chat/lib/endpoint.rb:76:in `call'
# ./plugins/chat/lib/endpoint.rb:70:in `call'
# ./plugins/chat/spec/lib/endpoint_spec.rb:80:in `block (3 levels) in <main>'
# ./plugins/chat/spec/lib/endpoint_spec.rb:198:in `block (5 levels) in <main>'
# ./spec/rails_helper.rb:358:in `block (2 levels) in <top (required)>'
```
Previous commit 479c0a3051 was done with the assumption that this info was defined on user serializer but it was actually defined on post serializer in core. This commit extends the user serializer for messages to add this data to the user.
Also correctly adds serializer test to ensure we actually have this data.
* UX: handle long userstatus in menupanel
* UX: remove margin on userstatus emoji
* UX: change emoji sise of user status in DM creator
* FIX: user status overflow on chat index
Adds a new LookupThread class that handles finding the
thread based on thread + channel ID, checking permissions
and policy/contract checks.
Co-authored-by: Loïc Guitaut <loic@discourse.org>
Initially, the ChatMention model / db table was introduced to better support notifications (see discourse/discourse-chat@0801d10). That means that currently, we create a new chat_mention record only if a user will be notified about the mention.
Now we plan to start using the ChatMention model in other scenarios (for example for implementing user status on mentions) so we need to always create a new record in the chat_mention table. This PR does the first step into that direction by decoupling the logic for extracting and expanding mentions from the code related to notifications.
This doesn't change any behavior, only extracts code from ChatNotifier.
Before that change, footer of the sidebar was not visible.
Footer is very important, especially now, when add custom section button is located there.
Also, distance between chat input and keyboard were increased
This commit changes the ChatThreadsManager into a native
class instead of an ember service, and initializes it
for every ChatChannel model. This way each channel has its
own thread manager and cache that we can load/unload as
needed, and we also move activeThread to the channel since
it makes more sense to keep it there, not inside the chat service.
The pattern of calling setOwner with the passed in owner
from ChatChannel is adapted from the latest ember docs,
and is needed to avoid the error below when calling services
from the native class:
> Attempting to lookup an injected property on an object without a container, ensure that the object was instantiated via a container
It works well _only_ if we use our own getOwner wrapper
from addon/lib/get-owner, which is for backwards compat.
c.f. https://guides.emberjs.com/release/in-depth-topics/native-classes-in-depth/
We were calling the job with a symbol as one of the values:
```ruby
Jobs.enqueue(
:send_message_notifications,
chat_message_id: 1,
timestamp: Time.now.iso8601(6),
reason: :new,
)
```
Which is a bad pattern as when the job serialisation will happen, `:new` will become `"new"` and you have to deal with a string in your job and not a symbol, which can be confusing and lead to bugs.
